/* see contrib/loaders/flash/stm32f1x.S for src */
static const uint8_t stm32x_flash_write_code[] = {
- /* #define STM32_FLASH_CR_OFFSET 0x10 */
/* #define STM32_FLASH_SR_OFFSET 0x0C */
/* wait_fifo: */
0x16, 0x68, /* ldr r6, [r2, #0] */
0x00, 0x2e, /* cmp r6, #0 */
- 0x1a, 0xd0, /* beq exit */
+ 0x18, 0xd0, /* beq exit */
0x55, 0x68, /* ldr r5, [r2, #4] */
0xb5, 0x42, /* cmp r5, r6 */
0xf9, 0xd0, /* beq wait_fifo */
- 0x01, 0x26, /* movs r6, #1 */
- 0x06, 0x61, /* str r6, [r0, #STM32_FLASH_CR_OFFSET] */
0x2e, 0x88, /* ldrh r6, [r5, #0] */
0x26, 0x80, /* strh r6, [r4, #0] */
0x02, 0x35, /* adds r5, #2 */
0x01, 0x39, /* subs r1, r1, #1 */
0x00, 0x29, /* cmp r1, #0 */
0x02, 0xd0, /* beq exit */
- 0xe3, 0xe7, /* b wait_fifo */
+ 0xe5, 0xe7, /* b wait_fifo */
/* error: */
0x00, 0x20, /* movs r0, #0 */
0x50, 0x60, /* str r0, [r2, #4] */
if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_PGERR) {
LOG_ERROR("flash memory not erased before writing");
/* Clear but report errors */
- target_write_u32(target, STM32_FLASH_SR_B0, FLASH_PGERR);
+ target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_PGERR);
}
if (buf_get_u32(reg_params[0].value, 0, 32) & FLASH_WRPRTERR) {
LOG_ERROR("flash memory write protected");
/* Clear but report errors */
- target_write_u32(target, STM32_FLASH_SR_B0, FLASH_WRPRTERR);
+ target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_SR), FLASH_WRPRTERR);
}
}
if (retval != ERROR_OK)
return retval;
+ retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
+ if (retval != ERROR_OK)
+ return retval;
+
/* multiple half words (2-byte) to be programmed? */
if (words_remaining > 0) {
/* try using a block write */
}
if ((retval != ERROR_OK) && (retval != ERROR_TARGET_RESOURCE_NOT_AVAILABLE))
- return retval;
+ goto reset_pg_and_lock;
while (words_remaining > 0) {
uint16_t value;
memcpy(&value, buffer + bytes_written, sizeof(uint16_t));
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
- if (retval != ERROR_OK)
- return retval;
retval = target_write_u16(target, address, value);
if (retval != ERROR_OK)
- return retval;
+ goto reset_pg_and_lock;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
- return retval;
+ goto reset_pg_and_lock;
bytes_written += 2;
words_remaining--;
uint16_t value = 0xffff;
memcpy(&value, buffer + bytes_written, bytes_remaining);
- retval = target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_PG);
- if (retval != ERROR_OK)
- return retval;
retval = target_write_u16(target, address, value);
if (retval != ERROR_OK)
- return retval;
+ goto reset_pg_and_lock;
retval = stm32x_wait_status_busy(bank, 5);
if (retval != ERROR_OK)
- return retval;
+ goto reset_pg_and_lock;
}
- return target_write_u32(target, STM32_FLASH_CR_B0, FLASH_LOCK);
+ return target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+
+reset_pg_and_lock:
+ target_write_u32(target, stm32x_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+ return retval;
}
static int stm32x_get_device_id(struct flash_bank *bank, uint32_t *device_id)
} else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
/* 0xC23 is M3 devices */
device_id_register = 0xE0042000;
+ } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
+ /* 0xC24 is M4 devices */
+ device_id_register = 0xE0042000;
} else {
LOG_ERROR("Cannot identify target as a stm32x");
return ERROR_FAIL;
return retval;
}
-static int stm32x_probe(struct flash_bank *bank)
+static int stm32x_get_flash_size(struct flash_bank *bank, uint16_t *flash_size_in_kb)
{
struct target *target = bank->target;
+ uint32_t cpuid, flash_size_reg;
+
+ int retval = target_read_u32(target, 0xE000ED00, &cpuid);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (((cpuid >> 4) & 0xFFF) == 0xC20) {
+ /* 0xC20 is M0 devices */
+ flash_size_reg = 0x1FFFF7CC;
+ } else if (((cpuid >> 4) & 0xFFF) == 0xC23) {
+ /* 0xC23 is M3 devices */
+ flash_size_reg = 0x1FFFF7E0;
+ } else if (((cpuid >> 4) & 0xFFF) == 0xC24) {
+ /* 0xC24 is M4 devices */
+ flash_size_reg = 0x1FFFF7CC;
+ } else {
+ LOG_ERROR("Cannot identify target as a stm32x");
+ return ERROR_FAIL;
+ }
+
+ retval = target_read_u16(target, flash_size_reg, flash_size_in_kb);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return retval;
+}
+
+static int stm32x_probe(struct flash_bank *bank)
+{
struct stm32x_flash_bank *stm32x_info = bank->driver_priv;
int i;
uint16_t flash_size_in_kb;
+ uint16_t max_flash_size_in_kb;
uint32_t device_id;
int page_size;
uint32_t base_address = 0x08000000;
-
stm32x_info->probed = 0;
stm32x_info->register_base = FLASH_REG_BASE_B0;
LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
- /* get flash size from target. */
- retval = target_read_u16(target, 0x1FFFF7E0, &flash_size_in_kb);
- if (retval != ERROR_OK) {
- LOG_WARNING("failed reading flash size, default to max target family");
- /* failed reading flash size, default to max target family */
- flash_size_in_kb = 0xffff;
- }
-
- if ((device_id & 0xfff) == 0x410) {
- /* medium density - we have 1k pages
- * 4 pages for a protection area */
+ /* set page size, protection granularity and max flash size depending on family */
+ switch (device_id & 0xfff) {
+ case 0x410: /* medium density */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revA */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
- flash_size_in_kb = 128;
- }
- } else if ((device_id & 0xfff) == 0x412) {
- /* low density - we have 1k pages
- * 4 pages for a protection area */
+ max_flash_size_in_kb = 128;
+ break;
+ case 0x412: /* low density */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revA */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 32k flash");
- flash_size_in_kb = 32;
- }
- } else if ((device_id & 0xfff) == 0x414) {
- /* high density - we have 2k pages
- * 2 pages for a protection area */
+ max_flash_size_in_kb = 32;
+ break;
+ case 0x414: /* high density */
page_size = 2048;
stm32x_info->ppage_size = 2;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revZ */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 512k flash");
- flash_size_in_kb = 512;
- }
- } else if ((device_id & 0xfff) == 0x418) {
- /* connectivity line density - we have 2k pages
- * 2 pages for a protection area */
+ max_flash_size_in_kb = 512;
+ break;
+ case 0x418: /* connectivity line density */
page_size = 2048;
stm32x_info->ppage_size = 2;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revZ */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 256k flash");
- flash_size_in_kb = 256;
- }
- } else if ((device_id & 0xfff) == 0x420) {
- /* value line density - we have 1k pages
- * 4 pages for a protection area */
+ max_flash_size_in_kb = 256;
+ break;
+ case 0x420: /* value line density */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
- flash_size_in_kb = 128;
- }
- } else if ((device_id & 0xfff) == 0x428) {
- /* value line High density - we have 2k pages
- * 4 pages for a protection area */
+ max_flash_size_in_kb = 128;
+ break;
+ case 0x422: /* stm32f30x */
+ page_size = 2048;
+ stm32x_info->ppage_size = 2;
+ max_flash_size_in_kb = 256;
+ break;
+ case 0x428: /* value line High density */
page_size = 2048;
stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 128k flash");
- flash_size_in_kb = 128;
- }
- } else if ((device_id & 0xfff) == 0x430) {
- /* xl line density - we have 2k pages
- * 2 pages for a protection area */
+ max_flash_size_in_kb = 128;
+ break;
+ case 0x430: /* xl line density (dual flash banks) */
page_size = 2048;
stm32x_info->ppage_size = 2;
+ max_flash_size_in_kb = 1024;
stm32x_info->has_dual_banks = true;
+ break;
+ case 0x432: /* stm32f37x */
+ page_size = 2048;
+ stm32x_info->ppage_size = 2;
+ max_flash_size_in_kb = 256;
+ break;
+ case 0x440: /* stm32f0x */
+ page_size = 1024;
+ stm32x_info->ppage_size = 4;
+ max_flash_size_in_kb = 64;
+ break;
+ default:
+ LOG_WARNING("Cannot identify target as a STM32 family.");
+ return ERROR_FAIL;
+ }
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors may be incorrrect on early silicon */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 1024k flash");
- flash_size_in_kb = 1024;
- }
+ /* get flash size from target. */
+ retval = stm32x_get_flash_size(bank, &flash_size_in_kb);
+
+ /* failed reading flash size or flash size invalid (early silicon),
+ * default to max target family */
+ if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
+ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
+ max_flash_size_in_kb);
+ flash_size_in_kb = max_flash_size_in_kb;
+ }
+ if (stm32x_info->has_dual_banks) {
/* split reported size into matching bank */
if (bank->base != 0x08080000) {
/* bank 0 will be fixed 512k */
stm32x_info->register_base = FLASH_REG_BASE_B1;
base_address = 0x08080000;
}
- } else if ((device_id & 0xfff) == 0x440) {
- /* stm32f0x - we have 1k pages
- * 4 pages for a protection area */
- page_size = 1024;
- stm32x_info->ppage_size = 4;
-
- /* check for early silicon */
- if (flash_size_in_kb == 0xffff) {
- /* number of sectors incorrect on revZ */
- LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming 64k flash");
- flash_size_in_kb = 64;
- }
- } else {
- LOG_WARNING("Cannot identify target as a STM32 family.");
- return ERROR_FAIL;
}
LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
snprintf(buf, buf_size, "Z");
break;
+ default:
+ snprintf(buf, buf_size, "unknown");
+ break;
+ }
+ } else if ((device_id & 0xfff) == 0x422) {
+ printed = snprintf(buf, buf_size, "stm32f30x - Rev: ");
+ buf += printed;
+ buf_size -= printed;
+
+ switch (device_id >> 16) {
+ case 0x1000:
+ snprintf(buf, buf_size, "1.0");
+ break;
+
default:
snprintf(buf, buf_size, "unknown");
break;
snprintf(buf, buf_size, "A");
break;
+ default:
+ snprintf(buf, buf_size, "unknown");
+ break;
+ }
+ } else if ((device_id & 0xfff) == 0x432) {
+ printed = snprintf(buf, buf_size, "stm32f37x - Rev: ");
+ buf += printed;
+ buf_size -= printed;
+
+ switch (device_id >> 16) {
+ case 0x1000:
+ snprintf(buf, buf_size, "1.0");
+ break;
+
default:
snprintf(buf, buf_size, "unknown");
break;
switch (device_id >> 16) {
case 0x1000:
- snprintf(buf, buf_size, "A");
+ snprintf(buf, buf_size, "1.0");
+ break;
+
+ case 0x2000:
+ snprintf(buf, buf_size, "2.0");
break;
default:
.read = default_flash_read,
.probe = stm32x_probe,
.auto_probe = stm32x_auto_probe,
- .erase_check = default_flash_mem_blank_check,
+ .erase_check = default_flash_blank_check,
.protect_check = stm32x_protect_check,
.info = get_stm32x_info,
};
projects / openocd / blobdiff