/* init procedures for supported layouts */
static int usbjtag_init(void);
static int jtagkey_init(void);
+static int lm3s811_jtag_init(void);
+static int icdi_jtag_init(void);
static int olimex_jtag_init(void);
static int flyswatter_init(void);
static int turtle_init(void);
static int sheevaplug_init(void);
static int icebear_jtag_init(void);
static int cortino_jtag_init(void);
+static int signalyzer_init(void);
static int signalyzer_h_init(void);
static int ktlink_init(void);
static int redbee_init(void);
/* reset procedures for supported layouts */
-static void usbjtag_reset(int trst, int srst);
+static void ftx23_reset(int trst, int srst);
static void jtagkey_reset(int trst, int srst);
static void olimex_jtag_reset(int trst, int srst);
static void flyswatter_reset(int trst, int srst);
{
{ .name = "usbjtag",
.init = usbjtag_init,
- .reset = usbjtag_reset,
+ .reset = ftx23_reset,
},
{ .name = "jtagkey",
.init = jtagkey_init,
.reset = jtagkey_reset,
},
{ .name = "signalyzer",
- .init = usbjtag_init,
- .reset = usbjtag_reset,
+ .init = signalyzer_init,
+ .reset = ftx23_reset,
},
{ .name = "evb_lm3s811",
- .init = usbjtag_init,
- .reset = usbjtag_reset,
+ .init = lm3s811_jtag_init,
+ .reset = ftx23_reset,
},
{ .name = "luminary_icdi",
- .init = usbjtag_init,
- .reset = usbjtag_reset,
+ .init = icdi_jtag_init,
+ .reset = ftx23_reset,
},
{ .name = "olimex-jtag",
.init = olimex_jtag_init,
{ .name = NULL, /* END OF TABLE */ },
};
-static uint8_t nTRST, nTRSTnOE, nSRST, nSRSTnOE;
+/* bitmask used to drive nTRST; usually a GPIOLx signal */
+static uint8_t nTRST;
+static uint8_t nTRSTnOE;
+/* bitmask used to drive nSRST; usually a GPIOLx signal */
+static uint8_t nSRST;
+static uint8_t nSRSTnOE;
/** the layout being used with this debug session */
static const struct ft2232_layout *layout;
+/** default bitmask values ddriven on DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
static uint8_t low_output = 0x0;
+/** default direction bitmask for DBUS: TCK/TDI/TDO/TMS and GPIOL(0..4) */
static uint8_t low_direction = 0x0;
+/** default value bitmask for CBUS GPIOH(0..4) */
static uint8_t high_output = 0x0;
+/** default direction bitmask for CBUS GPIOH(0..4) */
static uint8_t high_direction = 0x0;
#if BUILD_FT2232_FTD2XX == 1
return predicted_size;
}
-static void usbjtag_reset(int trst, int srst)
+/* semi-generic FT2232/FT4232 reset code */
+static void ftx23_reset(int trst, int srst)
{
enum reset_types jtag_reset_config = jtag_get_reset_config();
if (trst == 1)
{
case JTAG_RESET: retval = ft2232_execute_reset(cmd); break;
case JTAG_RUNTEST: retval = ft2232_execute_runtest(cmd); break;
- case JTAG_STATEMOVE: retval = ft2232_execute_statemove(cmd); break;
+ case JTAG_TLR_RESET: retval = ft2232_execute_statemove(cmd); break;
case JTAG_PATHMOVE: retval = ft2232_execute_pathmove(cmd); break;
case JTAG_SCAN: retval = ft2232_execute_scan(cmd); break;
case JTAG_SLEEP: retval = ft2232_execute_sleep(cmd); break;
return ERROR_OK;
}
-static int usbjtag_init(void)
+/** Updates defaults for DBUS signals: the four JTAG signals
+ * (TCK, TDI, TDO, TMS) and * the four GPIOL signals.
+ */
+static inline void ftx232_init_head(void)
{
- uint8_t buf[3];
- uint32_t bytes_written;
- char *ft2232_layout = layout->name;
-
low_output = 0x08;
low_direction = 0x0b;
+}
- if (strcmp(ft2232_layout, "usbjtag") == 0)
- {
- nTRST = 0x10;
- nTRSTnOE = 0x10;
- nSRST = 0x40;
- nSRSTnOE = 0x40;
- }
- else if (strcmp(ft2232_layout, "signalyzer") == 0)
- {
- nTRST = 0x10;
- nTRSTnOE = 0x10;
- nSRST = 0x20;
- nSRSTnOE = 0x20;
- }
- else if (strcmp(ft2232_layout, "evb_lm3s811") == 0)
- {
- /* There are multiple revisions of LM3S811 eval boards:
- * - Rev B (and older?) boards have no SWO trace support.
- * - Rev C boards add ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN;
- * they should use the "luminary_icdi" layout instead.
- */
- nTRST = 0x0;
- nTRSTnOE = 0x00;
- nSRST = 0x20;
- nSRSTnOE = 0x20;
- low_output = 0x88;
- low_direction = 0x8b;
- }
- else if (strcmp(ft2232_layout, "luminary_icdi") == 0)
- {
- /* Most Luminary eval boards support SWO trace output,
- * and should use this "luminary_icdi" layout.
- */
- nTRST = 0x0;
- nTRSTnOE = 0x00;
- nSRST = 0x20;
- nSRSTnOE = 0x20;
- low_output = 0x88;
- low_direction = 0xcb;
- }
- else
- {
- LOG_ERROR("BUG: usbjtag_init called for unknown layout '%s'", ft2232_layout);
- return ERROR_JTAG_INIT_FAILED;
- }
+/** Initializes DBUS signals: the four JTAG signals (TCK, TDI, TDO, TMS),
+ * the four GPIOL signals. Initialization covers value and direction,
+ * as customized for each layout.
+ */
+static int ftx232_init_tail(void)
+{
+ uint8_t buf[3];
+ uint32_t bytes_written;
enum reset_types jtag_reset_config = jtag_get_reset_config();
if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
{
- LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout");
+ LOG_ERROR("couldn't initialize FT2232 DBUS");
return ERROR_JTAG_INIT_FAILED;
}
return ERROR_OK;
}
+static int usbjtag_init(void)
+{
+ /*
+ * NOTE: This is now _specific_ to the "usbjtag" layout.
+ * Don't try cram any more layouts into this.
+ */
+ ftx232_init_head();
+
+ nTRST = 0x10;
+ nTRSTnOE = 0x10;
+ nSRST = 0x40;
+ nSRSTnOE = 0x40;
+
+ return ftx232_init_tail();
+}
+
+static int lm3s811_jtag_init(void)
+{
+ ftx232_init_head();
+
+ /* There are multiple revisions of LM3S811 eval boards:
+ * - Rev B (and older?) boards have no SWO trace support.
+ * - Rev C boards add ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN;
+ * they should use the "luminary_icdi" layout instead.
+ */
+ nTRST = 0x0;
+ nTRSTnOE = 0x00;
+ nSRST = 0x20;
+ nSRSTnOE = 0x20;
+ low_output = 0x88;
+ low_direction = 0x8b;
+
+ return ftx232_init_tail();
+}
+
+static int icdi_jtag_init(void)
+{
+ ftx232_init_head();
+
+ /* Most Luminary eval boards support SWO trace output,
+ * and should use this "luminary_icdi" layout.
+ */
+ nTRST = 0x0;
+ nTRSTnOE = 0x00;
+ nSRST = 0x20;
+ nSRSTnOE = 0x20;
+ low_output = 0x88;
+ low_direction = 0xcb;
+
+ return ftx232_init_tail();
+}
+
+static int signalyzer_init(void)
+{
+ ftx232_init_head();
+
+ nTRST = 0x10;
+ nTRSTnOE = 0x10;
+ nSRST = 0x20;
+ nSRSTnOE = 0x20;
+ return ftx232_init_tail();
+}
+
static int axm0432_jtag_init(void)
{
uint8_t buf[3];