char* name;
int(*init)(void);
void(*reset)(int trst, int srst);
+ void(*blink)(void);
} ft2232_layout_t;
+/* init procedures for supported layouts */
int usbjtag_init(void);
int jtagkey_init(void);
+int olimex_jtag_init(void);
+int m5960_init(void);
+
+/* reset procedures for supported layouts */
void usbjtag_reset(int trst, int srst);
void jtagkey_reset(int trst, int srst);
+void olimex_jtag_reset(int trst, int srst);
+void m5960_reset(int trst, int srst);
+
+/* blink procedures for layouts that support a blinking led */
+void olimex_jtag_blink(void);
ft2232_layout_t ft2232_layouts[] =
{
- {"usbjtag", usbjtag_init, usbjtag_reset},
- {"jtagkey", jtagkey_init, jtagkey_reset},
- {"jtagkey_prototype_v1", jtagkey_init, jtagkey_reset},
- {"signalyzer", usbjtag_init, usbjtag_reset},
+ {"usbjtag", usbjtag_init, usbjtag_reset, NULL},
+ {"jtagkey", jtagkey_init, jtagkey_reset, NULL},
+ {"jtagkey_prototype_v1", jtagkey_init, jtagkey_reset, NULL},
+ {"signalyzer", usbjtag_init, usbjtag_reset, NULL},
+ {"olimex-jtag", olimex_jtag_init, olimex_jtag_reset, olimex_jtag_blink},
+ {"m5960", m5960_init, m5960_reset, NULL},
{NULL, NULL, NULL},
};
.execute_queue = ft2232_execute_queue,
- .support_statemove = 1,
+ .support_pathmove = 1,
.speed = ft2232_speed,
.register_commands = ft2232_register_commands,
DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
}
+void olimex_jtag_reset(int trst, int srst)
+{
+ if (trst == 1)
+ {
+ cur_state = TAP_TLR;
+ if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
+ high_output &= ~nTRSTnOE;
+ else
+ high_output &= ~nTRST;
+ }
+ else if (trst == 0)
+ {
+ if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
+ high_output |= nTRSTnOE;
+ else
+ high_output |= nTRST;
+ }
+
+ if (srst == 1)
+ {
+ high_output |= nSRST;
+ }
+ else if (srst == 0)
+ {
+ high_output &= ~nSRST;
+ }
+
+ /* command "set data bits high byte" */
+ BUFFER_ADD = 0x82;
+ BUFFER_ADD = high_output;
+ BUFFER_ADD = high_direction;
+ DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
+}
+
+void m5960_reset(int trst, int srst)
+{
+ if (trst == 1)
+ {
+ cur_state = TAP_TLR;
+ low_output &= ~nTRST;
+ }
+ else if (trst == 0)
+ {
+ low_output |= nTRST;
+ }
+
+ if (srst == 1)
+ {
+ low_output |= nSRST;
+ }
+ else if (srst == 0)
+ {
+ low_output &= ~nSRST;
+ }
+
+ /* command "set data bits low byte" */
+ BUFFER_ADD = 0x80;
+ BUFFER_ADD = low_output;
+ BUFFER_ADD = low_direction;
+ DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction);
+}
+
int ft2232_execute_queue()
{
jtag_command_t *cmd = jtag_command_queue; /* currently processed command */
ft2232_buffer_size = 0;
ft2232_expect_read = 0;
+
+ /* blink, if the current layout has that feature */
+ if (layout->blink)
+ layout->blink();
while (cmd)
{
{
DEBUG("current latency timer: %i", latency_timer);
}
+
+ if ((status = FT_SetTimeouts(ftdih, 5000, 5000)) != FT_OK)
+ {
+ ERROR("unable to set timeouts: %i", status);
+ return ERROR_JTAG_INIT_FAILED;
+ }
if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK)
{
}
/* initialize high port */
- buf[0] = 0x82; /* command "set data bits low byte" */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output; /* value */
+ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int olimex_jtag_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x08;
+ low_direction = 0x1b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x01;
+ nTRSTnOE = 0x4;
+ nSRST = 0x02;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x0;
+ high_direction = 0x0f;
+
+ if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
+ {
+ high_output |= nTRSTnOE;
+ high_output &= ~nTRST;
+ }
+ else
+ {
+ high_output &= ~nTRSTnOE;
+ high_output |= nTRST;
+ }
+
+ if (jtag_reset_config & RESET_SRST_PUSH_PULL)
+ {
+ ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
+ }
+ else
+ {
+ high_output &= ~nSRST;
+ }
+
+ /* turn red LED on */
+ high_output |= 0x08;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
buf[1] = high_output; /* value */
buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
return ERROR_OK;
}
+int m5960_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x18;
+ low_direction = 0xfb;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'm5960' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ nTRST = 0x10;
+ nTRSTnOE = 0x0; /* not output enable for nTRST */
+ nSRST = 0x20;
+ nSRSTnOE = 0x00; /* no output enable for nSRST */
+
+ high_output = 0x00;
+ high_direction = 0x0c;
+
+ /* turn red LED1 on, LED2 off */
+ high_output |= 0x08;
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output; /* value */
+ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
+ DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ ERROR("couldn't initialize FT2232 with 'm5960' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+void olimex_jtag_blink(void)
+{
+ /* Olimex ARM-USB-OCD has a LED connected to ACBUS3
+ * ACBUS3 is bit 3 of the GPIOH port
+ */
+ if (high_output & 0x08)
+ {
+ /* set port pin high */
+ high_output &= 0x07;
+ }
+ else
+ {
+ /* set port pin low */
+ high_output |= 0x08;
+ }
+
+ BUFFER_ADD = 0x82;
+ BUFFER_ADD = high_output;
+ BUFFER_ADD = high_direction;
+}
+
int ft2232_quit(void)
{
#if BUILD_FT2232_FTD2XX == 1
projects / openocd / blobdiff