/***************************************************************************
- * Copyright (C) 2007-2008 by Øyvind Harboe *
+ * Copyright (C) 2007-2009 by Øyvind Harboe *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
+
+/* This file supports the zy1000 debugger: http://www.zylin.com/zy1000.html
+ *
+ * The zy1000 is a standalone debugger that has a web interface and
+ * requires no drivers on the developer host as all communication
+ * is via TCP/IP. The zy1000 gets it performance(~400-700kBytes/s
+ * DCC downloads @ 16MHz target) as it has an FPGA to hardware
+ * accelerate the JTAG commands, while offering *very* low latency
+ * between OpenOCD and the FPGA registers.
+ *
+ * The disadvantage of the zy1000 is that it has a feeble CPU compared to
+ * a PC(ca. 50-500 DMIPS depending on how one counts it), whereas a PC
+ * is on the order of 10000 DMIPS(i.e. at a factor of 20-200).
+ *
+ * The zy1000 revc hardware is using an Altera Nios CPU, whereas the
+ * revb is using ARM7 + Xilinx.
+ *
+ * See Zylin web pages or contact Zylin for more information.
+ *
+ * The reason this code is in OpenOCD rather than OpenOCD linked with the
+ * ZY1000 code is that OpenOCD is the long road towards getting
+ * libopenocd into place. libopenocd will support both low performance,
+ * low latency systems(embedded) and high performance high latency
+ * systems(PCs).
+ */
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
-#include "embeddedice.h"
-#include "minidriver.h"
-#include "interface.h"
+#include <target/embeddedice.h>
+#include <jtag/minidriver.h>
+#include <jtag/interface.h>
#include "zy1000_version.h"
#include <cyg/hal/hal_io.h> // low level i/o
#include <time.h>
+#ifdef CYGPKG_HAL_NIOS2
+#include <cyg/hal/io.h>
+#include <cyg/firmwareutil/firmwareutil.h>
+#endif
+
#define ZYLIN_VERSION GIT_ZY1000_VERSION
#define ZYLIN_DATE __DATE__
#define ZYLIN_TIME __TIME__
#define ZYLIN_OPENOCD GIT_OPENOCD_VERSION
#define ZYLIN_OPENOCD_VERSION "ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE
-/* low level command set
- */
-void zy1000_reset(int trst, int srst);
-
-
-int zy1000_speed(int speed);
-int zy1000_register_commands(struct command_context *cmd_ctx);
-int zy1000_init(void);
-int zy1000_quit(void);
static int zy1000_khz(int khz, int *jtag_speed)
{
{
cyg_uint32 state;
// sample and clear power dropout
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x80);
- HAL_READ_UINT32(ZY1000_JTAG_BASE + 0x10, state);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x80);
+ ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, state);
bool powerDropout;
powerDropout = (state & 0x80) != 0;
return powerDropout;
{
cyg_uint32 state;
// sample and clear SRST sensing
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x00000040);
- HAL_READ_UINT32(ZY1000_JTAG_BASE + 0x10, state);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000040);
+ ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, state);
bool srstAsserted;
srstAsserted = (state & 0x40) != 0;
return srstAsserted;
return ERROR_OK;
}
-
-struct jtag_interface zy1000_interface =
-{
- .name = "ZY1000",
- .execute_queue = NULL,
- .speed = zy1000_speed,
- .register_commands = zy1000_register_commands,
- .init = zy1000_init,
- .quit = zy1000_quit,
- .khz = zy1000_khz,
- .speed_div = zy1000_speed_div,
- .power_dropout = zy1000_power_dropout,
- .srst_asserted = zy1000_srst_asserted,
-};
-
void zy1000_reset(int trst, int srst)
{
LOG_DEBUG("zy1000 trst=%d, srst=%d", trst, srst);
savePower = power;
if (power)
{
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x14, 0x8);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x8);
} else
{
- HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x8);
+ ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x8);
}
}
// fall through
}
case 0:
- command_print(cmd_ctx, "Target power %s", savePower ? "on" : "off");
+ LOG_INFO("Target power %s", savePower ? "on" : "off");
break;
default:
return ERROR_INVALID_ARGUMENTS;
#ifdef CYGPKG_HAL_NIOS2
+
+
+struct info_forward
+{
+ void *data;
+ struct cyg_upgrade_info *upgraded_file;
+};
+
+static void report_info(void *data, const char * format, va_list args)
+{
+ char *s = alloc_vprintf(format, args);
+ LOG_USER_N("%s", s);
+ free(s);
+}
+
+struct cyg_upgrade_info firmware_info =
+{
+ (cyg_uint8 *)0x84000000,
+ "/ram/firmware.phi",
+ "Firmware",
+ 0x0300000,
+ 0x1f00000 -
+ 0x0300000,
+ "ZylinNiosFirmware\n",
+ report_info,
+};
+
static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
if (argc != 2)
return JIM_ERR;
int length;
- int stat;
const char *str = Jim_GetString(argv[1], &length);
- /* BUG!!!! skip header! */
- void *firmware_address=0x4000000;
- int firmware_length=0x100000;
-
- if (length>firmware_length)
+ /* */
+ int tmpFile;
+ if ((tmpFile = open(firmware_info.file, O_RDWR | O_CREAT | O_TRUNC)) <= 0)
+ {
+ return JIM_ERR;
+ }
+ bool success;
+ success = write(tmpFile, str, length) == length;
+ close(tmpFile);
+ if (!success)
return JIM_ERR;
- void *err_addr;
-
- if ((stat = flash_erase((void *)firmware_address, firmware_length, (void **)&err_addr)) != 0)
- {
- return JIM_ERR;
- }
-
- if ((stat = flash_program(firmware_address, str, length, (void **)&err_addr)) != 0)
- return JIM_ERR;
+ if (!cyg_firmware_upgrade(NULL, firmware_info))
+ return JIM_ERR;
- return JIM_OK;
+ return JIM_OK;
}
#endif
return JIM_OK;
}
-int zy1000_register_commands(struct command_context *cmd_ctx)
-{
- register_command(cmd_ctx, NULL, "power", handle_power_command, COMMAND_ANY,
- "power <on/off> - turn power switch to target on/off. No arguments - print status.");
-
- Jim_CreateCommand(interp, "zy1000_version", jim_zy1000_version, NULL, NULL);
-
-
- Jim_CreateCommand(interp, "powerstatus", zylinjtag_Jim_Command_powerstatus, NULL, NULL);
-
-#ifdef CYGPKG_HAL_NIOS2
- Jim_CreateCommand(interp, "updatezy1000firmware", jim_zy1000_writefirmware, NULL, NULL);
-#endif
-
-
- return ERROR_OK;
-}
-
}
+static const struct command_registration zy1000_commands[] = {
+ {
+ .name = "power",
+ .handler = handle_power_command,
+ .mode = COMMAND_ANY,
+ .help = "Turn power switch to target on/off. "
+ "With no arguments, prints status.",
+ .usage = "('on'|'off)",
+ },
+ {
+ .name = "zy1000_version",
+ .mode = COMMAND_ANY,
+ .jim_handler = jim_zy1000_version,
+ .help = "Print version info for zy1000.",
+ .usage = "['openocd'|'zy1000'|'date'|'time'|'pcb'|'fpga']",
+ },
+ {
+ .name = "powerstatus",
+ .mode = COMMAND_ANY,
+ .jim_handler = zylinjtag_Jim_Command_powerstatus,
+ .help = "Returns power status of target",
+ },
+#ifdef CYGPKG_HAL_NIOS2
+ {
+ .name = "updatezy1000firmware",
+ .mode = COMMAND_ANY,
+ .jim_handler = jim_zy1000_writefirmware,
+ .help = "writes firmware to flash",
+ /* .usage = "some_string", */
+ },
+#endif
+ COMMAND_REGISTRATION_DONE
+};
+
+
+
+struct jtag_interface zy1000_interface =
+{
+ .name = "ZY1000",
+ .execute_queue = NULL,
+ .speed = zy1000_speed,
+ .commands = zy1000_commands,
+ .init = zy1000_init,
+ .quit = zy1000_quit,
+ .khz = zy1000_khz,
+ .speed_div = zy1000_speed_div,
+ .power_dropout = zy1000_power_dropout,
+ .srst_asserted = zy1000_srst_asserted,
+};
+
projects / openocd / blobdiff