* will be needed to collect the data which was read; the "invalue" collects
* the posted result of a preceding operation, not the current one.
*
- * @param swjdp the DAP
+ * @param dap the DAP
* @param instr JTAG_DP_APACC (AP access) or JTAG_DP_DPACC (DP access)
* @param reg_addr two significant bits; A[3:2]; for APACC access, the
* SELECT register has more addressing bits.
/* FIXME don't export ... this is a temporary workaround for the
* mem_ap_read_buf_u32() mess, until it's no longer JTAG-specific.
*/
-int adi_jtag_dp_scan(struct adiv5_dap *swjdp,
+int adi_jtag_dp_scan(struct adiv5_dap *dap,
uint8_t instr, uint8_t reg_addr, uint8_t RnW,
uint8_t *outvalue, uint8_t *invalue, uint8_t *ack)
{
- struct arm_jtag *jtag_info = swjdp->jtag_info;
+ struct arm_jtag *jtag_info = dap->jtag_info;
struct scan_field fields[2];
uint8_t out_addr_buf;
jtag_set_end_state(TAP_IDLE);
- arm_jtag_set_instr(jtag_info, instr, NULL);
+ arm_jtag_set_instr(jtag_info, instr, NULL, TAP_IDLE);
/* Scan out a read or write operation using some DP or AP register.
* For APACC access with any sticky error flag set, this is discarded.
fields[1].out_value = outvalue;
fields[1].in_value = invalue;
- jtag_add_dr_scan(jtag_info->tap, 2, fields, jtag_get_end_state());
+ jtag_add_dr_scan(jtag_info->tap, 2, fields, TAP_IDLE);
/* Add specified number of tck clocks after starting memory bus
* access, giving the hardware time to complete the access.
if ((instr == JTAG_DP_APACC)
&& ((reg_addr == AP_REG_DRW)
|| ((reg_addr & 0xF0) == AP_REG_BD0))
- && (swjdp->memaccess_tck != 0))
- jtag_add_runtest(swjdp->memaccess_tck,
- jtag_set_end_state(TAP_IDLE));
+ && (dap->memaccess_tck != 0))
+ jtag_add_runtest(dap->memaccess_tck,
+ TAP_IDLE);
return jtag_get_error();
}
* conversions are performed (so the types of invalue and outvalue
* must be different).
*/
-static int adi_jtag_dp_scan_u32(struct adiv5_dap *swjdp,
+static int adi_jtag_dp_scan_u32(struct adiv5_dap *dap,
uint8_t instr, uint8_t reg_addr, uint8_t RnW,
uint32_t outvalue, uint32_t *invalue, uint8_t *ack)
{
buf_set_u32(out_value_buf, 0, 32, outvalue);
- retval = adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW,
+ retval = adi_jtag_dp_scan(dap, instr, reg_addr, RnW,
out_value_buf, (uint8_t *)invalue, ack);
if (retval != ERROR_OK)
return retval;
outvalue, NULL, NULL);
}
-static int adi_jtag_scan_inout_check_u32(struct adiv5_dap *swjdp,
+static int adi_jtag_scan_inout_check_u32(struct adiv5_dap *dap,
uint8_t instr, uint8_t reg_addr, uint8_t RnW,
uint32_t outvalue, uint32_t *invalue)
{
int retval;
/* Issue the read or write */
- retval = adi_jtag_dp_scan_u32(swjdp, instr, reg_addr,
+ retval = adi_jtag_dp_scan_u32(dap, instr, reg_addr,
RnW, outvalue, NULL, NULL);
if (retval != ERROR_OK)
return retval;
* Assumes read gets acked with OK/FAULT, and CTRL_STAT says "OK".
*/
if ((RnW == DPAP_READ) && (invalue != NULL))
- retval = adi_jtag_dp_scan_u32(swjdp, JTAG_DP_DPACC,
- DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
+ retval = adi_jtag_dp_scan_u32(dap, JTAG_DP_DPACC,
+ DP_RDBUFF, DPAP_READ, 0, invalue, &dap->ack);
return retval;
}
-static int jtagdp_transaction_endcheck(struct adiv5_dap *swjdp)
+static int jtagdp_transaction_endcheck(struct adiv5_dap *dap)
{
int retval;
uint32_t ctrlstat;
#if 0
/* Danger!!!! BROKEN!!!! */
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
+ adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
/* Danger!!!! BROKEN!!!! Why will jtag_execute_queue() fail here????
R956 introduced the check on return value here and now Michael Schwingen reports
/* Post CTRL/STAT read; discard any previous posted read value
* but collect its ACK status.
*/
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
+ adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
if ((retval = jtag_execute_queue()) != ERROR_OK)
return retval;
- swjdp->ack = swjdp->ack & 0x7;
+ dap->ack = dap->ack & 0x7;
/* common code path avoids calling timeval_ms() */
- if (swjdp->ack != JTAG_ACK_OK_FAULT)
+ if (dap->ack != JTAG_ACK_OK_FAULT)
{
long long then = timeval_ms();
- while (swjdp->ack != JTAG_ACK_OK_FAULT)
+ while (dap->ack != JTAG_ACK_OK_FAULT)
{
- if (swjdp->ack == JTAG_ACK_WAIT)
+ if (dap->ack == JTAG_ACK_WAIT)
{
if ((timeval_ms()-then) > 1000)
{
{
LOG_WARNING("Invalid ACK %#x "
"in JTAG-DP transaction",
- swjdp->ack);
+ dap->ack);
return ERROR_JTAG_DEVICE_ERROR;
}
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
+ adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = dap_run(swjdp)) != ERROR_OK)
+ if ((retval = dap_run(dap)) != ERROR_OK)
return retval;
- swjdp->ack = swjdp->ack & 0x7;
+ dap->ack = dap->ack & 0x7;
}
}
LOG_DEBUG("jtag-dp: CTRL/STAT error, 0x%" PRIx32, ctrlstat);
/* Check power to debug regions */
if ((ctrlstat & 0xf0000000) != 0xf0000000)
- ahbap_debugport_init(swjdp);
+ ahbap_debugport_init(dap);
else
{
uint32_t mem_ap_csw, mem_ap_tar;
* MEM-AP access; but not if autoincrementing.
* *Real* CSW and TAR values are always shown.
*/
- if (swjdp->ap_tar_value != (uint32_t) -1)
+ if (dap->ap_tar_value != (uint32_t) -1)
LOG_DEBUG("MEM-AP Cached values: "
"ap_bank 0x%" PRIx32
", ap_csw 0x%" PRIx32
", ap_tar 0x%" PRIx32,
- swjdp->ap_bank_value,
- swjdp->ap_csw_value,
- swjdp->ap_tar_value);
+ dap->ap_bank_value,
+ dap->ap_csw_value,
+ dap->ap_tar_value);
if (ctrlstat & SSTICKYORUN)
LOG_ERROR("JTAG-DP OVERRUN - check clock, "
LOG_ERROR("JTAG-DP STICKY ERROR");
/* Clear Sticky Error Bits */
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
+ adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_WRITE,
- swjdp->dp_ctrl_stat | SSTICKYORUN
+ dap->dp_ctrl_stat | SSTICKYORUN
| SSTICKYERR, NULL);
- adi_jtag_scan_inout_check_u32(swjdp, JTAG_DP_DPACC,
+ adi_jtag_scan_inout_check_u32(dap, JTAG_DP_DPACC,
DP_CTRL_STAT, DPAP_READ, 0, &ctrlstat);
- if ((retval = dap_run(swjdp)) != ERROR_OK)
+ if ((retval = dap_run(dap)) != ERROR_OK)
return retval;
LOG_DEBUG("jtag-dp: CTRL/STAT 0x%" PRIx32, ctrlstat);
- retval = dap_queue_ap_read(swjdp,
+ retval = dap_queue_ap_read(dap,
AP_REG_CSW, &mem_ap_csw);
if (retval != ERROR_OK)
return retval;
- retval = dap_queue_ap_read(swjdp,
+ retval = dap_queue_ap_read(dap,
AP_REG_TAR, &mem_ap_tar);
if (retval != ERROR_OK)
return retval;
- if ((retval = dap_run(swjdp)) != ERROR_OK)
+ if ((retval = dap_run(dap)) != ERROR_OK)
return retval;
LOG_ERROR("MEM_AP_CSW 0x%" PRIx32 ", MEM_AP_TAR 0x%"
PRIx32, mem_ap_csw, mem_ap_tar);
}
- if ((retval = dap_run(swjdp)) != ERROR_OK)
+ if ((retval = dap_run(dap)) != ERROR_OK)
return retval;
return ERROR_JTAG_DEVICE_ERROR;
}
int retval;
struct scan_field fields[1];
- jtag_set_end_state(TAP_IDLE);
-
/* This is a standard JTAG operation -- no DAP tweakage */
- retval = arm_jtag_set_instr(jtag_info, JTAG_DP_IDCODE, NULL);
+ jtag_set_end_state(TAP_IDLE);
+ retval = arm_jtag_set_instr(jtag_info, JTAG_DP_IDCODE, NULL, TAP_IDLE);
if (retval != ERROR_OK)
return retval;
fields[0].out_value = NULL;
fields[0].in_value = (void *) data;
- jtag_add_dr_scan(jtag_info->tap, 1, fields, jtag_get_end_state());
+ jtag_add_dr_scan(jtag_info->tap, 1, fields, TAP_IDLE);
retval = jtag_get_error();
if (retval != ERROR_OK)
return retval;