* *
* Copyright (C) 2008 Georg Acher <acher@in.tum.de> *
* *
+ * Copyright (C) 2009 David Brownell *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include "target_type.h"
#include "algorithm.h"
#include "register.h"
+#include "arm_opcodes.h"
#if 0
static int arm11_check_init(struct arm11_common *arm11)
{
CHECK_RETVAL(arm11_read_DSCR(arm11));
- LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
if (!(arm11->dscr & DSCR_HALT_DBG_MODE))
{
+ LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
LOG_DEBUG("Bringing target into debug mode");
arm11->dscr |= DSCR_HALT_DBG_MODE;
*/
arm11->arm.target->state = TARGET_HALTED;
- arm11->arm.target->debug_reason =
- arm11_get_DSCR_debug_reason(arm11->dscr);
+ arm_dpm_report_dscr(arm11->arm.dpm, arm11->dscr);
}
else
{
int retval;
arm11->arm.target->state = TARGET_HALTED;
- arm11->arm.target->debug_reason =
- arm11_get_DSCR_debug_reason(arm11->dscr);
+ arm_dpm_report_dscr(arm11->arm.dpm, arm11->dscr);
/* REVISIT entire cache should already be invalid !!! */
register_cache_invalidate(arm11->arm.core_cache);
}
+ if (arm11->arm.target->debug_reason == DBG_REASON_WATCHPOINT) {
+ uint32_t wfar;
+
+ /* MRC p15, 0, <Rd>, c6, c0, 1 ; Read WFAR */
+ retval = arm11_run_instr_data_from_core_via_r0(arm11,
+ ARMV4_5_MRC(15, 0, 0, 6, 0, 1),
+ &wfar);
+ if (retval != ERROR_OK)
+ return retval;
+ arm_dpm_report_wfar(arm11->arm.dpm, wfar);
+ }
+
+
retval = arm11_run_instr_data_finish(arm11);
if (retval != ERROR_OK)
return retval;
*/
retval = arm_dpm_write_dirty_registers(&arm11->dpm, bpwp);
+ retval = arm11_bpwp_flush(arm11);
+
register_cache_invalidate(arm11->arm.core_cache);
/* restore DSCR */
return retval;
target_call_event_callbacks(target,
- old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED);
+ (old_state == TARGET_DEBUG_RUNNING)
+ ? TARGET_EVENT_DEBUG_HALTED
+ : TARGET_EVENT_HALTED);
}
}
else
/* architecture specific status reply */
static int arm11_arch_state(struct target *target)
{
+ struct arm11_common *arm11 = target_to_arm11(target);
int retval;
- retval = armv4_5_arch_state(target);
+ retval = arm_arch_state(target);
/* REVISIT also display ARM11-specific MMU and cache status ... */
+ if (target->debug_reason == DBG_REASON_WATCHPOINT)
+ LOG_USER("Watchpoint triggered at PC %#08x",
+ (unsigned) arm11->dpm.wp_pc);
+
return retval;
}
if (!debug_execution)
target_free_all_working_areas(target);
- /* Set up breakpoints */
- if (handle_breakpoints)
- {
- /* check if one matches PC and step over it if necessary */
-
- struct breakpoint * bp;
+ /* Should we skip over breakpoints matching the PC? */
+ if (handle_breakpoints) {
+ struct breakpoint *bp;
for (bp = target->breakpoints; bp; bp = bp->next)
{
break;
}
}
+ }
- /* set all breakpoints */
-
+ /* activate all breakpoints */
+ if (true) {
+ struct breakpoint *bp;
unsigned brp_num = 0;
for (bp = target->breakpoints; bp; bp = bp->next)
brp_num++;
}
- arm11_sc7_set_vcr(arm11, arm11_vcr);
+ if (arm11_vcr)
+ arm11_sc7_set_vcr(arm11, arm11_vcr);
}
- arm11_leave_debug_state(arm11, handle_breakpoints);
+ /* activate all watchpoints and breakpoints */
+ arm11_leave_debug_state(arm11, true);
arm11_add_IR(arm11, ARM11_RESTART, TAP_IDLE);
i++;
}
+ target->debug_reason = DBG_REASON_NOTHALTED;
if (!debug_execution)
- {
- target->state = TARGET_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
- }
+ target->state = TARGET_RUNNING;
else
- {
- target->state = TARGET_DEBUG_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
- }
+ target->state = TARGET_DEBUG_RUNNING;
+ CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
return ERROR_OK;
}
}
- target->debug_reason = DBG_REASON_SINGLESTEP;
+ target->debug_reason = DBG_REASON_SINGLESTEP;
CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_HALTED));
static int arm11_assert_reset(struct target *target)
{
- int retval;
struct arm11_common *arm11 = target_to_arm11(target);
- retval = arm11_check_init(arm11);
- if (retval != ERROR_OK)
- return retval;
+ /* optionally catch reset vector */
+ if (target->reset_halt && !(arm11_vcr & 1))
+ arm11_sc7_set_vcr(arm11, arm11_vcr | 1);
+
+ /* Issue some kind of warm reset. */
+ if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
+ target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
+ } else if (jtag_get_reset_config() & RESET_HAS_SRST) {
+ /* REVISIT handle "pulls" cases, if there's
+ * hardware that needs them to work.
+ */
+ jtag_add_reset(0, 1);
+ } else {
+ LOG_ERROR("%s: how to reset?", target_name(target));
+ return ERROR_FAIL;
+ }
- target->state = TARGET_UNKNOWN;
+ /* registers are now invalid */
+ register_cache_invalidate(arm11->arm.core_cache);
- /* we would very much like to reset into the halted, state,
- * but resetting and halting is second best... */
- if (target->reset_halt)
- {
- CHECK_RETVAL(target_halt(target));
- }
+ target->state = TARGET_RESET;
+ return ERROR_OK;
+}
- /* srst is funny. We can not do *anything* else while it's asserted
- * and it has unkonwn side effects. Make sure no other code runs
- * meanwhile.
- *
- * Code below assumes srst:
- *
- * - Causes power-on-reset (but of what parts of the system?). Bug
- * in arm11?
- *
- * - Messes us TAP state without asserting trst.
- *
- * - There is another bug in the arm11 core. When you generate an access to
- * external logic (for example ddr controller via AHB bus) and that block
- * is not configured (perhaps it is still held in reset), that transaction
- * will never complete. This will hang arm11 core but it will also hang
- * JTAG controller. Nothing, short of srst assertion will bring it out of
- * this.
- *
- * Mysteries:
- *
- * - What should the PC be after an srst reset when starting in the halted
- * state?
- */
+/*
+ * - There is another bug in the arm11 core. (iMX31 specific again?)
+ * When you generate an access to external logic (for example DDR
+ * controller via AHB bus) and that block is not configured (perhaps
+ * it is still held in reset), that transaction will never complete.
+ * This will hang arm11 core but it will also hang JTAG controller.
+ * Nothing short of srst assertion will bring it out of this.
+ */
- jtag_add_reset(0, 1);
- jtag_add_reset(0, 0);
+static int arm11_deassert_reset(struct target *target)
+{
+ struct arm11_common *arm11 = target_to_arm11(target);
+ int retval;
- /* How long do we have to wait? */
- jtag_add_sleep(5000);
+ /* be certain SRST is off */
+ jtag_add_reset(0, 0);
- /* un-mess up TAP state */
+ /* WORKAROUND i.MX31 problems: SRST goofs the TAP, and resets
+ * at least DSCR. OMAP24xx doesn't show that problem, though
+ * SRST-only reset seems to be problematic for other reasons.
+ * (Secure boot sequences being one likelihood!)
+ */
jtag_add_tlr();
- retval = jtag_execute_queue();
- if (retval != ERROR_OK)
- {
- return retval;
+ retval = arm11_poll(target);
+
+ if (target->reset_halt) {
+ if (target->state != TARGET_HALTED) {
+ LOG_WARNING("%s: ran after reset and before halt ...",
+ target_name(target));
+ if ((retval = target_halt(target)) != ERROR_OK)
+ return retval;
+ }
}
- return ERROR_OK;
-}
+ /* maybe restore vector catch config */
+ if (target->reset_halt && !(arm11_vcr & 1))
+ arm11_sc7_set_vcr(arm11, arm11_vcr);
-static int arm11_deassert_reset(struct target *target)
-{
return ERROR_OK;
}
if (retval != ERROR_OK)
return retval;
+ /* load r0 with buffer address */
/* MRC p14,0,r0,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
if (retval != ERROR_OK)
for (size_t i = 0; i < count; i++)
{
+ /* load r1 from DCC with byte data */
/* MRC p14,0,r1,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, *buffer++);
if (retval != ERROR_OK)
return retval;
+ /* write r1 to memory */
/* strb r1, [r0], #1 */
/* strb r1, [r0] */
retval = arm11_run_instr_no_data1(arm11,
uint16_t value;
memcpy(&value, buffer + i * sizeof(uint16_t), sizeof(uint16_t));
+ /* load r1 from DCC with halfword data */
/* MRC p14,0,r1,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, value);
if (retval != ERROR_OK)
return retval;
+ /* write r1 to memory */
/* strh r1, [r0], #2 */
/* strh r1, [r0] */
retval = arm11_run_instr_no_data1(arm11,
}
case 4: {
+ /* stream word data through DCC directly to memory */
+ /* increment: STC p14,c5,[R0],#4 */
+ /* no increment: STC p14,c5,[R0]*/
uint32_t instr = !no_increment ? 0xeca05e01 : 0xed805e00;
/** \todo TODO: buffer cast to uint32_t* causes alignment warnings */
uint32_t *words = (uint32_t*)buffer;
+ /* "burst" here just means trusting each instruction executes
+ * fully before we run the next one: per-word roundtrips, to
+ * check the Ready flag, are not used.
+ */
if (!burst)
- {
- /* STC p14,c5,[R0],#4 */
- /* STC p14,c5,[R0]*/
- retval = arm11_run_instr_data_to_core(arm11, instr, words, count);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = arm11_run_instr_data_to_core(arm11,
+ instr, words, count);
else
- {
- /* STC p14,c5,[R0],#4 */
- /* STC p14,c5,[R0]*/
- retval = arm11_run_instr_data_to_core_noack(arm11, instr, words, count);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = arm11_run_instr_data_to_core_noack(arm11,
+ instr, words, count);
+ if (retval != ERROR_OK)
+ return retval;
break;
}
if (!arm11)
return ERROR_FAIL;
- armv4_5_init_arch_info(target, &arm11->arm);
+ arm_init_arch_info(target, &arm11->arm);
arm11->jtag_info.tap = target->tap;
arm11->jtag_info.scann_size = 5;
arm11->jtag_info.scann_instr = ARM11_SCAN_N;
- /* cur_scan_chain == 0 */
+ arm11->jtag_info.cur_scan_chain = ~0; /* invalid/unknown */
arm11->jtag_info.intest_instr = ARM11_INTEST;
return ERROR_OK;
CHECK_RETVAL(jtag_execute_queue());
- switch (device_id & 0x0FFFF000)
+ /* assume the manufacturer id is ok; check the part # */
+ switch ((device_id >> 12) & 0xFFFF)
{
- case 0x07B36000:
+ case 0x7B36:
type = "ARM1136";
break;
- case 0x07B56000:
+ case 0x7B37:
+ type = "ARM11 MPCore";
+ break;
+ case 0x7B56:
type = "ARM1156";
break;
- case 0x07B76000:
+ case 0x7B76:
arm11->arm.core_type = ARM_MODE_MON;
type = "ARM1176";
break;
default:
- LOG_ERROR("'target arm11' expects IDCODE 0x*7B*7****");
+ LOG_ERROR("unexpected ARM11 ID code");
return ERROR_FAIL;
}
LOG_INFO("found %s", type);
}
arm11->brp = ((didr >> 24) & 0x0F) + 1;
- arm11->wrp = ((didr >> 28) & 0x0F) + 1;
/** \todo TODO: reserve one brp slot if we allow breakpoints during step */
arm11->free_brps = arm11->brp;
static const struct command_registration arm11_mw_command_handlers[] = {
{
.name = "burst",
- .handler = &arm11_handle_bool_memwrite_burst,
+ .handler = arm11_handle_bool_memwrite_burst,
.mode = COMMAND_ANY,
- .help = "Enable/Disable non-standard but fast burst mode"
- " (default: enabled)",
+ .help = "Display or modify flag controlling potentially "
+ "risky fast burst mode (default: enabled)",
+ .usage = "['enable'|'disable']",
},
{
.name = "error_fatal",
- .handler = &arm11_handle_bool_memwrite_error_fatal,
+ .handler = arm11_handle_bool_memwrite_error_fatal,
.mode = COMMAND_ANY,
- .help = "Terminate program if transfer error was found"
+ .help = "Display or modify flag controlling transfer "
+ "termination on transfer errors"
" (default: enabled)",
+ .usage = "['enable'|'disable']",
},
COMMAND_REGISTRATION_DONE
};
* simulate + breakpoint implementation is broken.
* TEMPORARY! NOT DOCUMENTED! */
.name = "hardware_step",
- .handler = &arm11_handle_bool_hardware_step,
+ .handler = arm11_handle_bool_hardware_step,
.mode = COMMAND_ANY,
.help = "DEBUG ONLY - Hardware single stepping"
" (default: disabled)",
- .usage = "(enable|disable)",
+ .usage = "['enable'|'disable']",
},
{
.name = "memwrite",
},
{
.name = "step_irq_enable",
- .handler = &arm11_handle_bool_step_irq_enable,
+ .handler = arm11_handle_bool_step_irq_enable,
.mode = COMMAND_ANY,
- .help = "Enable interrupts while stepping"
- " (default: disabled)",
+ .help = "Display or modify flag controlling interrupt "
+ "enable while stepping (default: disabled)",
+ .usage = "['enable'|'disable']",
},
{
.name = "vcr",
- .handler = &arm11_handle_vcr,
+ .handler = arm11_handle_vcr,
.mode = COMMAND_ANY,
- .help = "Control (Interrupt) Vector Catch Register",
+ .help = "Display or modify Vector Catch Register",
+ .usage = "[value]",
},
COMMAND_REGISTRATION_DONE
};
.deassert_reset = arm11_deassert_reset,
.soft_reset_halt = arm11_soft_reset_halt,
- .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
+ .get_gdb_reg_list = arm_get_gdb_reg_list,
.read_memory = arm11_read_memory,
.write_memory = arm11_write_memory,