* *
* Copyright (C) 2008 Georg Acher <acher@in.tum.de> *
* *
+ * Copyright (C) 2009 David Brownell *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include "breakpoints.h"
#include "arm11_dbgtap.h"
#include "arm_simulator.h"
-#include "time_support.h"
+#include <helper/time_support.h>
#include "target_type.h"
#include "algorithm.h"
#include "register.h"
+#include "arm_opcodes.h"
#if 0
#define _DEBUG_INSTRUCTION_EXECUTION_
#endif
+
+/* FIXME none of these flags should be global to all ARM11 cores!
+ * Most of them shouldn't exist at all, once the code works...
+ */
static bool arm11_config_memwrite_burst = true;
static bool arm11_config_memwrite_error_fatal = true;
static uint32_t arm11_vcr = 0;
static bool arm11_config_step_irq_enable = false;
static bool arm11_config_hardware_step = false;
-enum arm11_regtype
-{
- ARM11_REGISTER_CORE,
- ARM11_REGISTER_CPSR,
-
- ARM11_REGISTER_FX,
- ARM11_REGISTER_FPS,
-
- ARM11_REGISTER_FIQ,
- ARM11_REGISTER_SVC,
- ARM11_REGISTER_ABT,
- ARM11_REGISTER_IRQ,
- ARM11_REGISTER_UND,
- ARM11_REGISTER_MON,
-
- ARM11_REGISTER_SPSR_FIQ,
- ARM11_REGISTER_SPSR_SVC,
- ARM11_REGISTER_SPSR_ABT,
- ARM11_REGISTER_SPSR_IRQ,
- ARM11_REGISTER_SPSR_UND,
- ARM11_REGISTER_SPSR_MON,
-
- /* debug regs */
- ARM11_REGISTER_DSCR,
- ARM11_REGISTER_WDTR,
- ARM11_REGISTER_RDTR,
-};
-
-
-struct arm11_reg_defs
-{
- char * name;
- uint32_t num;
- int gdb_num;
- enum arm11_regtype type;
-};
-
-/* update arm11_regcache_ids when changing this */
-static const struct arm11_reg_defs arm11_reg_defs[] =
-{
- {"r0", 0, 0, ARM11_REGISTER_CORE},
- {"r1", 1, 1, ARM11_REGISTER_CORE},
- {"r2", 2, 2, ARM11_REGISTER_CORE},
- {"r3", 3, 3, ARM11_REGISTER_CORE},
- {"r4", 4, 4, ARM11_REGISTER_CORE},
- {"r5", 5, 5, ARM11_REGISTER_CORE},
- {"r6", 6, 6, ARM11_REGISTER_CORE},
- {"r7", 7, 7, ARM11_REGISTER_CORE},
- {"r8", 8, 8, ARM11_REGISTER_CORE},
- {"r9", 9, 9, ARM11_REGISTER_CORE},
- {"r10", 10, 10, ARM11_REGISTER_CORE},
- {"r11", 11, 11, ARM11_REGISTER_CORE},
- {"r12", 12, 12, ARM11_REGISTER_CORE},
- {"sp", 13, 13, ARM11_REGISTER_CORE},
- {"lr", 14, 14, ARM11_REGISTER_CORE},
- {"pc", 15, 15, ARM11_REGISTER_CORE},
-
- {"cpsr", 0, 25, ARM11_REGISTER_CPSR},
-
- /* Debug Registers */
- {"dscr", 0, -1, ARM11_REGISTER_DSCR},
- {"wdtr", 0, -1, ARM11_REGISTER_WDTR},
- {"rdtr", 0, -1, ARM11_REGISTER_RDTR},
-};
-
-enum arm11_regcache_ids
-{
- ARM11_RC_R0,
- ARM11_RC_RX = ARM11_RC_R0,
-
- ARM11_RC_R1,
- ARM11_RC_R2,
- ARM11_RC_R3,
- ARM11_RC_R4,
- ARM11_RC_R5,
- ARM11_RC_R6,
- ARM11_RC_R7,
- ARM11_RC_R8,
- ARM11_RC_R9,
- ARM11_RC_R10,
- ARM11_RC_R11,
- ARM11_RC_R12,
- ARM11_RC_R13,
- ARM11_RC_SP = ARM11_RC_R13,
- ARM11_RC_R14,
- ARM11_RC_LR = ARM11_RC_R14,
- ARM11_RC_R15,
- ARM11_RC_PC = ARM11_RC_R15,
-
- ARM11_RC_CPSR,
-
- ARM11_RC_DSCR,
- ARM11_RC_WDTR,
- ARM11_RC_RDTR,
-
- ARM11_RC_MAX,
-};
-
-static int arm11_on_enter_debug_state(struct arm11_common *arm11);
static int arm11_step(struct target *target, int current,
uint32_t address, int handle_breakpoints);
-/* helpers */
-static int arm11_build_reg_cache(struct target *target);
-static int arm11_set_reg(struct reg *reg, uint8_t *buf);
-static int arm11_get_reg(struct reg *reg);
/** Check and if necessary take control of the system
*
* \param arm11 Target state variable.
- * \param dscr If the current DSCR content is
- * available a pointer to a word holding the
- * DSCR can be passed. Otherwise use NULL.
*/
-static int arm11_check_init(struct arm11_common *arm11, uint32_t *dscr)
+static int arm11_check_init(struct arm11_common *arm11)
{
- uint32_t dscr_local_tmp_copy;
-
- if (!dscr)
- {
- dscr = &dscr_local_tmp_copy;
-
- CHECK_RETVAL(arm11_read_DSCR(arm11, dscr));
- }
+ CHECK_RETVAL(arm11_read_DSCR(arm11));
- if (!(*dscr & ARM11_DSCR_MODE_SELECT))
+ if (!(arm11->dscr & DSCR_HALT_DBG_MODE))
{
+ LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
LOG_DEBUG("Bringing target into debug mode");
- *dscr |= ARM11_DSCR_MODE_SELECT; /* Halt debug-mode */
- arm11_write_DSCR(arm11, *dscr);
+ arm11->dscr |= DSCR_HALT_DBG_MODE;
+ arm11_write_DSCR(arm11, arm11->dscr);
/* add further reset initialization here */
arm11->simulate_reset_on_next_halt = true;
- if (*dscr & ARM11_DSCR_CORE_HALTED)
+ if (arm11->dscr & DSCR_CORE_HALTED)
{
/** \todo TODO: this needs further scrutiny because
- * arm11_on_enter_debug_state() never gets properly called.
+ * arm11_debug_entry() never gets called. (WHY NOT?)
* As a result we don't read the actual register states from
* the target.
*/
- arm11->target->state = TARGET_HALTED;
- arm11->target->debug_reason = arm11_get_DSCR_debug_reason(*dscr);
+ arm11->arm.target->state = TARGET_HALTED;
+ arm_dpm_report_dscr(arm11->arm.dpm, arm11->dscr);
}
else
{
- arm11->target->state = TARGET_RUNNING;
- arm11->target->debug_reason = DBG_REASON_NOTHALTED;
+ arm11->arm.target->state = TARGET_RUNNING;
+ arm11->arm.target->debug_reason = DBG_REASON_NOTHALTED;
}
arm11_sc7_clear_vbw(arm11);
return ERROR_OK;
}
-
-
-#define R(x) \
- (arm11->reg_values[ARM11_RC_##x])
-
-/** Save processor state.
- *
- * This is called when the HALT instruction has succeeded
- * or on other occasions that stop the processor.
- *
- */
-static int arm11_on_enter_debug_state(struct arm11_common *arm11)
+/**
+ * Save processor state. This is called after a HALT instruction
+ * succeeds, and on other occasions the processor enters debug mode
+ * (breakpoint, watchpoint, etc). Caller has updated arm11->dscr.
+ */
+static int arm11_debug_entry(struct arm11_common *arm11)
{
int retval;
+ arm11->arm.target->state = TARGET_HALTED;
+ arm_dpm_report_dscr(arm11->arm.dpm, arm11->dscr);
+
/* REVISIT entire cache should already be invalid !!! */
register_cache_invalidate(arm11->arm.core_cache);
- for (size_t i = 0; i < ARRAY_SIZE(arm11->reg_values); i++)
- {
- arm11->reg_list[i].valid = 1;
- arm11->reg_list[i].dirty = 0;
- }
-
- /* Save DSCR */
- CHECK_RETVAL(arm11_read_DSCR(arm11, &R(DSCR)));
+ /* See e.g. ARM1136 TRM, "14.8.4 Entering Debug state" */
- /* Save wDTR */
-
- if (R(DSCR) & ARM11_DSCR_WDTR_FULL)
+ /* maybe save wDTR (pending DCC write to debug SW, e.g. libdcc) */
+ arm11->is_wdtr_saved = !!(arm11->dscr & DSCR_DTR_TX_FULL);
+ if (arm11->is_wdtr_saved)
{
arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
struct scan_field chain5_fields[3];
- arm11_setup_field(arm11, 32, NULL, &R(WDTR), chain5_fields + 0);
+ arm11_setup_field(arm11, 32, NULL,
+ &arm11->saved_wdtr, chain5_fields + 0);
arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 1);
arm11_setup_field(arm11, 1, NULL, NULL, chain5_fields + 2);
arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
- }
- else
- {
- arm11->reg_list[ARM11_RC_WDTR].valid = 0;
- }
-
- /* DSCR: set ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE */
- /* ARM1176 spec says this is needed only for wDTR/rDTR's "ITR mode", but not to issue ITRs
- ARM1136 seems to require this to issue ITR's as well */
-
- uint32_t new_dscr = R(DSCR) | ARM11_DSCR_EXECUTE_ARM_INSTRUCTION_ENABLE;
-
- /* this executes JTAG queue: */
+ }
- arm11_write_DSCR(arm11, new_dscr);
+ /* DSCR: set the Execute ARM instruction enable bit.
+ *
+ * ARM1176 spec says this is needed only for wDTR/rDTR's "ITR mode",
+ * but not to issue ITRs(?). The ARMv7 arch spec says it's required
+ * for executing instructions via ITR.
+ */
+ arm11_write_DSCR(arm11, DSCR_ITR_EN | arm11->dscr);
/* From the spec:
}
#endif
+ /* Save registers.
+ *
+ * NOTE: ARM1136 TRM suggests saving just R0 here now, then
+ * CPSR and PC after the rDTR stuff. We do it all at once.
+ */
retval = arm_dpm_read_current_registers(&arm11->dpm);
if (retval != ERROR_OK)
LOG_ERROR("DPM REG READ -- fail %d", retval);
if (retval != ERROR_OK)
return retval;
- /* save r0 - r14 */
-
- /** \todo TODO: handle other mode registers */
-
- for (size_t i = 0; i < 15; i++)
- {
- /* MCR p14,0,R?,c0,c5,0 */
- retval = arm11_run_instr_data_from_core(arm11, 0xEE000E15 | (i << 12), &R(RX + i), 1);
- if (retval != ERROR_OK)
- return retval;
- }
-
- /* save rDTR */
-
- /* check rDTRfull in DSCR */
-
- if (R(DSCR) & ARM11_DSCR_RDTR_FULL)
+ /* maybe save rDTR (pending DCC read from debug SW, e.g. libdcc) */
+ arm11->is_rdtr_saved = !!(arm11->dscr & DSCR_DTR_RX_FULL);
+ if (arm11->is_rdtr_saved)
{
/* MRC p14,0,R0,c0,c5,0 (move rDTR -> r0 (-> wDTR -> local var)) */
- retval = arm11_run_instr_data_from_core_via_r0(arm11, 0xEE100E15, &R(RDTR));
+ retval = arm11_run_instr_data_from_core_via_r0(arm11,
+ 0xEE100E15, &arm11->saved_rdtr);
if (retval != ERROR_OK)
return retval;
}
- else
- {
- arm11->reg_list[ARM11_RC_RDTR].valid = 0;
- }
-
- /* save CPSR */
-
- /* MRS r0,CPSR (move CPSR -> r0 (-> wDTR -> local var)) */
- retval = arm11_run_instr_data_from_core_via_r0(arm11, 0xE10F0000, &R(CPSR));
- if (retval != ERROR_OK)
- return retval;
-
- /* save PC */
-
- /* MOV R0,PC (move PC -> r0 (-> wDTR -> local var)) */
- retval = arm11_run_instr_data_from_core_via_r0(arm11, 0xE1A0000F, &R(PC));
- if (retval != ERROR_OK)
- return retval;
-
- /* adjust PC depending on ARM state */
- if (R(CPSR) & ARM11_CPSR_J) /* Java state */
- {
- arm11->reg_values[ARM11_RC_PC] -= 0;
- }
- else if (R(CPSR) & ARM11_CPSR_T) /* Thumb state */
- {
- arm11->reg_values[ARM11_RC_PC] -= 4;
- }
- else /* ARM state */
- {
- arm11->reg_values[ARM11_RC_PC] -= 8;
- }
+ /* REVISIT Now that we've saved core state, there's may also
+ * be MMU and cache state to care about ...
+ */
if (arm11->simulate_reset_on_next_halt)
{
}
+ if (arm11->arm.target->debug_reason == DBG_REASON_WATCHPOINT) {
+ uint32_t wfar;
+
+ /* MRC p15, 0, <Rd>, c6, c0, 1 ; Read WFAR */
+ retval = arm11_run_instr_data_from_core_via_r0(arm11,
+ ARMV4_5_MRC(15, 0, 0, 6, 0, 1),
+ &wfar);
+ if (retval != ERROR_OK)
+ return retval;
+ arm_dpm_report_wfar(arm11->arm.dpm, wfar);
+ }
+
+
retval = arm11_run_instr_data_finish(arm11);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-/** Restore processor state
- *
- * This is called in preparation for the RESTART function.
- *
- */
-static int arm11_leave_debug_state(struct arm11_common *arm11)
+/**
+ * Restore processor state. This is called in preparation for
+ * the RESTART function.
+ */
+static int arm11_leave_debug_state(struct arm11_common *arm11, bool bpwp)
{
int retval;
- retval = arm11_run_instr_data_prepare(arm11);
- if (retval != ERROR_OK)
- return retval;
-
- /** \todo TODO: handle other mode registers */
+ /* See e.g. ARM1136 TRM, "14.8.5 Leaving Debug state" */
- /* restore R1 - R14 */
-
- for (unsigned i = 1; i < 15; i++)
- {
- if (!arm11->reg_list[ARM11_RC_RX + i].dirty)
- continue;
-
- /* MRC p14,0,r?,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11,
- 0xee100e15 | (i << 12), R(RX + i));
-
- // LOG_DEBUG("RESTORE R%u %08x", i, R(RX + i));
- }
+ /* NOTE: the ARM1136 TRM suggests restoring all registers
+ * except R0/PC/CPSR right now. Instead, we do them all
+ * at once, just a bit later on.
+ */
- retval = arm11_run_instr_data_finish(arm11);
- if (retval != ERROR_OK)
- return retval;
+ /* REVISIT once we start caring about MMU and cache state,
+ * address it here ...
+ */
/* spec says clear wDTR and rDTR; we assume they are clear as
otherwise our programming would be sloppy */
{
- uint32_t DSCR;
-
- CHECK_RETVAL(arm11_read_DSCR(arm11, &DSCR));
+ CHECK_RETVAL(arm11_read_DSCR(arm11));
- if (DSCR & (ARM11_DSCR_RDTR_FULL | ARM11_DSCR_WDTR_FULL))
+ if (arm11->dscr & (DSCR_DTR_RX_FULL | DSCR_DTR_TX_FULL))
{
/*
The wDTR/rDTR two registers that are used to send/receive data to/from
registers hold data that was written by one side (CPU or JTAG) and not
read out by the other side.
*/
- LOG_ERROR("wDTR/rDTR inconsistent (DSCR %08" PRIx32 ")", DSCR);
+ LOG_ERROR("wDTR/rDTR inconsistent (DSCR %08x)",
+ (unsigned) arm11->dscr);
return ERROR_FAIL;
}
}
-/* DEBUG for now, trust "new" code only for shadowed registers */
-retval = arm_dpm_write_dirty_registers(&arm11->dpm);
-
- retval = arm11_run_instr_data_prepare(arm11);
- if (retval != ERROR_OK)
- return retval;
-
- /* restore original wDTR */
-
- if ((R(DSCR) & ARM11_DSCR_WDTR_FULL) || arm11->reg_list[ARM11_RC_WDTR].dirty)
+ /* maybe restore original wDTR */
+ if (arm11->is_wdtr_saved)
{
- /* MCR p14,0,R0,c0,c5,0 */
- retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xee000e15, R(WDTR));
+ retval = arm11_run_instr_data_prepare(arm11);
if (retval != ERROR_OK)
return retval;
- }
-
- /* restore CPSR */
-
- /* MSR CPSR,R0*/
- retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xe129f000, R(CPSR));
- if (retval != ERROR_OK)
- return retval;
-
-
- /* restore PC */
- /* MOV PC,R0 */
- retval = arm11_run_instr_data_to_core_via_r0(arm11, 0xe1a0f000, R(PC));
- if (retval != ERROR_OK)
- return retval;
-
-
- /* restore R0 */
+ /* MCR p14,0,R0,c0,c5,0 */
+ retval = arm11_run_instr_data_to_core_via_r0(arm11,
+ 0xee000e15, arm11->saved_wdtr);
+ if (retval != ERROR_OK)
+ return retval;
- /* MRC p14,0,r0,c0,c5,0 */
- arm11_run_instr_data_to_core1(arm11, 0xee100e15, R(R0));
+ retval = arm11_run_instr_data_finish(arm11);
+ if (retval != ERROR_OK)
+ return retval;
+ }
- retval = arm11_run_instr_data_finish(arm11);
- if (retval != ERROR_OK)
- return retval;
+ /* restore CPSR, PC, and R0 ... after flushing any modified
+ * registers.
+ */
+ retval = arm_dpm_write_dirty_registers(&arm11->dpm, bpwp);
-/* DEBUG use this when "new" code is really managing core registers */
-// retval = arm_dpm_write_dirty_registers(&arm11->dpm);
+ retval = arm11_bpwp_flush(arm11);
register_cache_invalidate(arm11->arm.core_cache);
/* restore DSCR */
+ arm11_write_DSCR(arm11, arm11->dscr);
- arm11_write_DSCR(arm11, R(DSCR));
-
- /* restore rDTR */
-
- if (R(DSCR) & ARM11_DSCR_RDTR_FULL || arm11->reg_list[ARM11_RC_RDTR].dirty)
+ /* maybe restore rDTR */
+ if (arm11->is_rdtr_saved)
{
arm11_add_debug_SCAN_N(arm11, 0x05, ARM11_TAP_DEFAULT);
uint8_t Ready = 0; /* ignored */
uint8_t Valid = 0; /* ignored */
- arm11_setup_field(arm11, 32, &R(RDTR), NULL, chain5_fields + 0);
+ arm11_setup_field(arm11, 32, &arm11->saved_rdtr,
+ NULL, chain5_fields + 0);
arm11_setup_field(arm11, 1, &Ready, NULL, chain5_fields + 1);
arm11_setup_field(arm11, 1, &Valid, NULL, chain5_fields + 2);
arm11_add_dr_scan_vc(ARRAY_SIZE(chain5_fields), chain5_fields, TAP_DRPAUSE);
}
+ /* now processor is ready to RESTART */
+
return ERROR_OK;
}
{
int retval;
struct arm11_common *arm11 = target_to_arm11(target);
- uint32_t dscr;
- CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
+ CHECK_RETVAL(arm11_check_init(arm11));
- LOG_DEBUG("DSCR %08" PRIx32 "", dscr);
-
- CHECK_RETVAL(arm11_check_init(arm11, &dscr));
-
- if (dscr & ARM11_DSCR_CORE_HALTED)
+ if (arm11->dscr & DSCR_CORE_HALTED)
{
if (target->state != TARGET_HALTED)
{
enum target_state old_state = target->state;
LOG_DEBUG("enter TARGET_HALTED");
- target->state = TARGET_HALTED;
- target->debug_reason = arm11_get_DSCR_debug_reason(dscr);
- retval = arm11_on_enter_debug_state(arm11);
+ retval = arm11_debug_entry(arm11);
if (retval != ERROR_OK)
return retval;
target_call_event_callbacks(target,
- old_state == TARGET_DEBUG_RUNNING ? TARGET_EVENT_DEBUG_HALTED : TARGET_EVENT_HALTED);
+ (old_state == TARGET_DEBUG_RUNNING)
+ ? TARGET_EVENT_DEBUG_HALTED
+ : TARGET_EVENT_HALTED);
}
}
else
/* architecture specific status reply */
static int arm11_arch_state(struct target *target)
{
+ struct arm11_common *arm11 = target_to_arm11(target);
int retval;
- retval = armv4_5_arch_state(target);
+ retval = arm_arch_state(target);
/* REVISIT also display ARM11-specific MMU and cache status ... */
+ if (target->debug_reason == DBG_REASON_WATCHPOINT)
+ LOG_USER("Watchpoint triggered at PC %#08x",
+ (unsigned) arm11->dpm.wp_pc);
+
return retval;
}
CHECK_RETVAL(jtag_execute_queue());
- uint32_t dscr;
-
int i = 0;
+
while (1)
{
- CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
+ CHECK_RETVAL(arm11_read_DSCR(arm11));
- if (dscr & ARM11_DSCR_CORE_HALTED)
+ if (arm11->dscr & DSCR_CORE_HALTED)
break;
i++;
}
- arm11_on_enter_debug_state(arm11);
-
enum target_state old_state = target->state;
- target->state = TARGET_HALTED;
- target->debug_reason = arm11_get_DSCR_debug_reason(dscr);
+ arm11_debug_entry(arm11);
CHECK_RETVAL(
target_call_event_callbacks(target,
return ERROR_OK;
}
+static uint32_t
+arm11_nextpc(struct arm11_common *arm11, int current, uint32_t address)
+{
+ void *value = arm11->arm.core_cache->reg_list[15].value;
+
+ if (!current)
+ buf_set_u32(value, 0, 32, address);
+ else
+ address = buf_get_u32(value, 0, 32);
+
+ return address;
+}
+
static int arm11_resume(struct target *target, int current,
uint32_t address, int handle_breakpoints, int debug_execution)
{
return ERROR_TARGET_NOT_HALTED;
}
- if (!current)
- R(PC) = address;
+ address = arm11_nextpc(arm11, current, address);
- LOG_DEBUG("RESUME PC %08" PRIx32 "%s", R(PC), !current ? "!" : "");
+ LOG_DEBUG("RESUME PC %08" PRIx32 "%s", address, !current ? "!" : "");
/* clear breakpoints/watchpoints and VCR*/
arm11_sc7_clear_vbw(arm11);
- /* Set up breakpoints */
if (!debug_execution)
- {
- /* check if one matches PC and step over it if necessary */
+ target_free_all_working_areas(target);
- struct breakpoint * bp;
+ /* Should we skip over breakpoints matching the PC? */
+ if (handle_breakpoints) {
+ struct breakpoint *bp;
for (bp = target->breakpoints; bp; bp = bp->next)
{
- if (bp->address == R(PC))
+ if (bp->address == address)
{
LOG_DEBUG("must step over %08" PRIx32 "", bp->address);
arm11_step(target, 1, 0, 0);
break;
}
}
+ }
- /* set all breakpoints */
-
+ /* activate all breakpoints */
+ if (true) {
+ struct breakpoint *bp;
unsigned brp_num = 0;
for (bp = target->breakpoints; bp; bp = bp->next)
brp_num++;
}
- arm11_sc7_set_vcr(arm11, arm11_vcr);
+ if (arm11_vcr)
+ arm11_sc7_set_vcr(arm11, arm11_vcr);
}
- arm11_leave_debug_state(arm11);
+ /* activate all watchpoints and breakpoints */
+ arm11_leave_debug_state(arm11, true);
arm11_add_IR(arm11, ARM11_RESTART, TAP_IDLE);
int i = 0;
while (1)
{
- uint32_t dscr;
-
- CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
+ CHECK_RETVAL(arm11_read_DSCR(arm11));
- LOG_DEBUG("DSCR %08" PRIx32 "", dscr);
+ LOG_DEBUG("DSCR %08x", (unsigned) arm11->dscr);
- if (dscr & ARM11_DSCR_CORE_RESTARTED)
+ if (arm11->dscr & DSCR_CORE_RESTARTED)
break;
i++;
}
+ target->debug_reason = DBG_REASON_NOTHALTED;
if (!debug_execution)
- {
- target->state = TARGET_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
- }
+ target->state = TARGET_RUNNING;
else
- {
- target->state = TARGET_DEBUG_RUNNING;
- target->debug_reason = DBG_REASON_NOTHALTED;
-
- CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
- }
+ target->state = TARGET_DEBUG_RUNNING;
+ CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_RESUMED));
return ERROR_OK;
}
struct arm11_common *arm11 = target_to_arm11(target);
- if (!current)
- R(PC) = address;
+ address = arm11_nextpc(arm11, current, address);
- LOG_DEBUG("STEP PC %08" PRIx32 "%s", R(PC), !current ? "!" : "");
+ LOG_DEBUG("STEP PC %08" PRIx32 "%s", address, !current ? "!" : "");
/** \todo TODO: Thumb not supported here */
uint32_t next_instruction;
- CHECK_RETVAL(arm11_read_memory_word(arm11, R(PC), &next_instruction));
+ CHECK_RETVAL(arm11_read_memory_word(arm11, address, &next_instruction));
/* skip over BKPT */
if ((next_instruction & 0xFFF00070) == 0xe1200070)
{
- R(PC) += 4;
- arm11->reg_list[ARM11_RC_PC].valid = 1;
- arm11->reg_list[ARM11_RC_PC].dirty = 0;
+ address = arm11_nextpc(arm11, 0, address + 4);
LOG_DEBUG("Skipping BKPT");
}
/* skip over Wait for interrupt / Standby */
/* mcr 15, 0, r?, cr7, cr0, {4} */
else if ((next_instruction & 0xFFFF0FFF) == 0xee070f90)
{
- R(PC) += 4;
- arm11->reg_list[ARM11_RC_PC].valid = 1;
- arm11->reg_list[ARM11_RC_PC].dirty = 0;
+ address = arm11_nextpc(arm11, 0, address + 4);
LOG_DEBUG("Skipping WFI");
}
/* ignore B to self */
* FIXME Thumb stepping likely needs to use 0x03
* or 0xc0 byte masks, not 0x0f.
*/
- brp[0].value = R(PC);
+ brp[0].value = address;
brp[1].value = 0x1 | (3 << 1) | (0x0F << 5)
| (0 << 14) | (0 << 16) | (0 << 20)
| (2 << 21);
if (arm11_config_step_irq_enable)
- R(DSCR) &= ~ARM11_DSCR_INTERRUPTS_DISABLE; /* should be redundant */
+ /* this disable should be redundant ... */
+ arm11->dscr &= ~DSCR_INT_DIS;
else
- R(DSCR) |= ARM11_DSCR_INTERRUPTS_DISABLE;
+ arm11->dscr |= DSCR_INT_DIS;
- CHECK_RETVAL(arm11_leave_debug_state(arm11));
+ CHECK_RETVAL(arm11_leave_debug_state(arm11, handle_breakpoints));
arm11_add_IR(arm11, ARM11_RESTART, TAP_IDLE);
/* wait for halt */
int i = 0;
+
while (1)
{
- uint32_t dscr;
+ const uint32_t mask = DSCR_CORE_RESTARTED
+ | DSCR_CORE_HALTED;
- CHECK_RETVAL(arm11_read_DSCR(arm11, &dscr));
+ CHECK_RETVAL(arm11_read_DSCR(arm11));
+ LOG_DEBUG("DSCR %08x e", (unsigned) arm11->dscr);
- LOG_DEBUG("DSCR %08" PRIx32 "e", dscr);
-
- if ((dscr & (ARM11_DSCR_CORE_RESTARTED | ARM11_DSCR_CORE_HALTED)) ==
- (ARM11_DSCR_CORE_RESTARTED | ARM11_DSCR_CORE_HALTED))
+ if ((arm11->dscr & mask) == mask)
break;
long long then = 0;
arm11_sc7_clear_vbw(arm11);
/* save state */
- CHECK_RETVAL(arm11_on_enter_debug_state(arm11));
+ CHECK_RETVAL(arm11_debug_entry(arm11));
- /* restore default state */
- R(DSCR) &= ~ARM11_DSCR_INTERRUPTS_DISABLE;
+ /* restore default state */
+ arm11->dscr &= ~DSCR_INT_DIS;
}
- // target->state = TARGET_HALTED;
- target->debug_reason = DBG_REASON_SINGLESTEP;
+ target->debug_reason = DBG_REASON_SINGLESTEP;
CHECK_RETVAL(target_call_event_callbacks(target, TARGET_EVENT_HALTED));
static int arm11_assert_reset(struct target *target)
{
- int retval;
struct arm11_common *arm11 = target_to_arm11(target);
- retval = arm11_check_init(arm11, NULL);
- if (retval != ERROR_OK)
- return retval;
-
- target->state = TARGET_UNKNOWN;
+ /* optionally catch reset vector */
+ if (target->reset_halt && !(arm11_vcr & 1))
+ arm11_sc7_set_vcr(arm11, arm11_vcr | 1);
- /* we would very much like to reset into the halted, state,
- * but resetting and halting is second best... */
- if (target->reset_halt)
- {
- CHECK_RETVAL(target_halt(target));
+ /* Issue some kind of warm reset. */
+ if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT)) {
+ target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
+ } else if (jtag_get_reset_config() & RESET_HAS_SRST) {
+ /* REVISIT handle "pulls" cases, if there's
+ * hardware that needs them to work.
+ */
+ jtag_add_reset(0, 1);
+ } else {
+ LOG_ERROR("%s: how to reset?", target_name(target));
+ return ERROR_FAIL;
}
+ /* registers are now invalid */
+ register_cache_invalidate(arm11->arm.core_cache);
- /* srst is funny. We can not do *anything* else while it's asserted
- * and it has unkonwn side effects. Make sure no other code runs
- * meanwhile.
- *
- * Code below assumes srst:
- *
- * - Causes power-on-reset (but of what parts of the system?). Bug
- * in arm11?
- *
- * - Messes us TAP state without asserting trst.
- *
- * - There is another bug in the arm11 core. When you generate an access to
- * external logic (for example ddr controller via AHB bus) and that block
- * is not configured (perhaps it is still held in reset), that transaction
- * will never complete. This will hang arm11 core but it will also hang
- * JTAG controller. Nothing, short of srst assertion will bring it out of
- * this.
- *
- * Mysteries:
- *
- * - What should the PC be after an srst reset when starting in the halted
- * state?
- */
+ target->state = TARGET_RESET;
- jtag_add_reset(0, 1);
- jtag_add_reset(0, 0);
+ return ERROR_OK;
+}
- /* How long do we have to wait? */
- jtag_add_sleep(5000);
+/*
+ * - There is another bug in the arm11 core. (iMX31 specific again?)
+ * When you generate an access to external logic (for example DDR
+ * controller via AHB bus) and that block is not configured (perhaps
+ * it is still held in reset), that transaction will never complete.
+ * This will hang arm11 core but it will also hang JTAG controller.
+ * Nothing short of srst assertion will bring it out of this.
+ */
- /* un-mess up TAP state */
+static int arm11_deassert_reset(struct target *target)
+{
+ struct arm11_common *arm11 = target_to_arm11(target);
+ int retval;
+
+ /* be certain SRST is off */
+ jtag_add_reset(0, 0);
+
+ /* WORKAROUND i.MX31 problems: SRST goofs the TAP, and resets
+ * at least DSCR. OMAP24xx doesn't show that problem, though
+ * SRST-only reset seems to be problematic for other reasons.
+ * (Secure boot sequences being one likelihood!)
+ */
jtag_add_tlr();
- retval = jtag_execute_queue();
- if (retval != ERROR_OK)
- {
- return retval;
+ retval = arm11_poll(target);
+
+ if (target->reset_halt) {
+ if (target->state != TARGET_HALTED) {
+ LOG_WARNING("%s: ran after reset and before halt ...",
+ target_name(target));
+ if ((retval = target_halt(target)) != ERROR_OK)
+ return retval;
+ }
}
- return ERROR_OK;
-}
+ /* maybe restore vector catch config */
+ if (target->reset_halt && !(arm11_vcr & 1))
+ arm11_sc7_set_vcr(arm11, arm11_vcr);
-static int arm11_deassert_reset(struct target *target)
-{
return ERROR_OK;
}
switch (size)
{
case 1:
- /** \todo TODO: check if dirty is the right choice to force a rewrite on arm11_resume() */
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ arm11->arm.core_cache->reg_list[1].dirty = true;
for (size_t i = 0; i < count; i++)
{
case 2:
{
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ arm11->arm.core_cache->reg_list[1].dirty = true;
for (size_t i = 0; i < count; i++)
{
}
/*
-* arm11_config_memrw_no_increment - in the future we may want to be able
+* no_increment - in the future we may want to be able
* to read/write a range of data to a "port". a "port" is an action on
* read memory address for some peripheral.
*/
static int arm11_write_memory_inner(struct target *target,
- uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer,
- bool arm11_config_memrw_no_increment)
+ uint32_t address, uint32_t size,
+ uint32_t count, uint8_t *buffer,
+ bool no_increment)
{
int retval;
if (retval != ERROR_OK)
return retval;
+ /* load r0 with buffer address */
/* MRC p14,0,r0,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee100e15, address);
if (retval != ERROR_OK)
{
case 1:
{
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ arm11->arm.core_cache->reg_list[1].dirty = true;
for (size_t i = 0; i < count; i++)
{
+ /* load r1 from DCC with byte data */
/* MRC p14,0,r1,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, *buffer++);
if (retval != ERROR_OK)
return retval;
+ /* write r1 to memory */
/* strb r1, [r0], #1 */
/* strb r1, [r0] */
retval = arm11_run_instr_no_data1(arm11,
- !arm11_config_memrw_no_increment ? 0xe4c01001 : 0xe5c01000);
+ !no_increment
+ ? 0xe4c01001
+ : 0xe5c01000);
if (retval != ERROR_OK)
return retval;
}
case 2:
{
- arm11->reg_list[ARM11_RC_R1].dirty = 1;
+ arm11->arm.core_cache->reg_list[1].dirty = true;
for (size_t i = 0; i < count; i++)
{
uint16_t value;
memcpy(&value, buffer + i * sizeof(uint16_t), sizeof(uint16_t));
+ /* load r1 from DCC with halfword data */
/* MRC p14,0,r1,c0,c5,0 */
retval = arm11_run_instr_data_to_core1(arm11, 0xee101e15, value);
if (retval != ERROR_OK)
return retval;
+ /* write r1 to memory */
/* strh r1, [r0], #2 */
/* strh r1, [r0] */
retval = arm11_run_instr_no_data1(arm11,
- !arm11_config_memrw_no_increment ? 0xe0c010b2 : 0xe1c010b0);
+ !no_increment
+ ? 0xe0c010b2
+ : 0xe1c010b0);
if (retval != ERROR_OK)
return retval;
}
}
case 4: {
- uint32_t instr = !arm11_config_memrw_no_increment ? 0xeca05e01 : 0xed805e00;
+ /* stream word data through DCC directly to memory */
+ /* increment: STC p14,c5,[R0],#4 */
+ /* no increment: STC p14,c5,[R0]*/
+ uint32_t instr = !no_increment ? 0xeca05e01 : 0xed805e00;
/** \todo TODO: buffer cast to uint32_t* causes alignment warnings */
uint32_t *words = (uint32_t*)buffer;
+ /* "burst" here just means trusting each instruction executes
+ * fully before we run the next one: per-word roundtrips, to
+ * check the Ready flag, are not used.
+ */
if (!burst)
- {
- /* STC p14,c5,[R0],#4 */
- /* STC p14,c5,[R0]*/
- retval = arm11_run_instr_data_to_core(arm11, instr, words, count);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = arm11_run_instr_data_to_core(arm11,
+ instr, words, count);
else
- {
- /* STC p14,c5,[R0],#4 */
- /* STC p14,c5,[R0]*/
- retval = arm11_run_instr_data_to_core_noack(arm11, instr, words, count);
- if (retval != ERROR_OK)
- return retval;
- }
+ retval = arm11_run_instr_data_to_core_noack(arm11,
+ instr, words, count);
+ if (retval != ERROR_OK)
+ return retval;
break;
}
}
/* r0 verification */
- if (!arm11_config_memrw_no_increment)
+ if (!no_increment)
{
uint32_t r0;
}
static int arm11_write_memory(struct target *target,
- uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
+ uint32_t address, uint32_t size,
+ uint32_t count, uint8_t *buffer)
{
- return arm11_write_memory_inner(target, address, size, count, buffer, false);
+ /* pointer increment matters only for multi-unit writes ...
+ * not e.g. to a "reset the chip" controller.
+ */
+ return arm11_write_memory_inner(target, address, size,
+ count, buffer, count == 1);
}
/* write target memory in multiples of 4 byte, optimized for writing large quantities of data */
return ERROR_OK;
}
-static int arm11_add_watchpoint(struct target *target,
- struct watchpoint *watchpoint)
-{
- LOG_WARNING("Not implemented: %s", __func__);
-
- return ERROR_FAIL;
-}
-
-static int arm11_remove_watchpoint(struct target *target,
- struct watchpoint *watchpoint)
-{
- LOG_WARNING("Not implemented: %s", __func__);
-
- return ERROR_FAIL;
-}
-
-// HACKHACKHACK - FIXME mode/state
-/* target algorithm support */
-static int arm11_run_algorithm(struct target *target,
- int num_mem_params, struct mem_param *mem_params,
- int num_reg_params, struct reg_param *reg_params,
- uint32_t entry_point, uint32_t exit_point,
- int timeout_ms, void *arch_info)
-{
- struct arm11_common *arm11 = target_to_arm11(target);
-// enum armv4_5_state core_state = arm11->core_state;
-// enum armv4_5_mode core_mode = arm11->core_mode;
- uint32_t context[16];
- uint32_t cpsr;
- int exit_breakpoint_size = 0;
- int retval = ERROR_OK;
- LOG_DEBUG("Running algorithm");
-
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- // FIXME
-// if (!is_arm_mode(arm11->core_mode))
-// return ERROR_FAIL;
-
- // Save regs
- for (unsigned i = 0; i < 16; i++)
- {
- context[i] = buf_get_u32((uint8_t*)(&arm11->reg_values[i]),0,32);
- LOG_DEBUG("Save %u: 0x%" PRIx32 "", i, context[i]);
- }
-
- cpsr = buf_get_u32((uint8_t*)(arm11->reg_values + ARM11_RC_CPSR),0,32);
- LOG_DEBUG("Save CPSR: 0x%" PRIx32 "", cpsr);
-
- for (int i = 0; i < num_mem_params; i++)
- {
- target_write_buffer(target, mem_params[i].address, mem_params[i].size, mem_params[i].value);
- }
-
- // Set register parameters
- for (int i = 0; i < num_reg_params; i++)
- {
- struct reg *reg = register_get_by_name(arm11->core_cache, reg_params[i].reg_name, 0);
- if (!reg)
- {
- LOG_ERROR("BUG: register '%s' not found", reg_params[i].reg_name);
- return ERROR_INVALID_ARGUMENTS;
- }
-
- if (reg->size != reg_params[i].size)
- {
- LOG_ERROR("BUG: register '%s' size doesn't match reg_params[i].size", reg_params[i].reg_name);
- return ERROR_INVALID_ARGUMENTS;
- }
- arm11_set_reg(reg,reg_params[i].value);
-// printf("%i: Set %s =%08x\n", i, reg_params[i].reg_name,val);
- }
-
- exit_breakpoint_size = 4;
-
-/* arm11->core_state = arm11_algorithm_info->core_state;
- if (arm11->core_state == ARMV4_5_STATE_ARM)
- exit_breakpoint_size = 4;
- else if (arm11->core_state == ARMV4_5_STATE_THUMB)
- exit_breakpoint_size = 2;
- else
- {
- LOG_ERROR("BUG: can't execute algorithms when not in ARM or Thumb state");
- exit(-1);
- }
-*/
-
-
-/* arm11 at this point only supports ARM not THUMB mode
- however if this test needs to be reactivated the current state can be read back
- from CPSR */
-#if 0
- if (arm11_algorithm_info->core_mode != ARMV4_5_MODE_ANY)
- {
- LOG_DEBUG("setting core_mode: 0x%2.2x", arm11_algorithm_info->core_mode);
- buf_set_u32(arm11->reg_list[ARM11_RC_CPSR].value, 0, 5, arm11_algorithm_info->core_mode);
- arm11->reg_list[ARM11_RC_CPSR].dirty = 1;
- arm11->reg_list[ARM11_RC_CPSR].valid = 1;
- }
-#endif
-
- if ((retval = breakpoint_add(target, exit_point, exit_breakpoint_size, BKPT_HARD)) != ERROR_OK)
- {
- LOG_ERROR("can't add breakpoint to finish algorithm execution");
- retval = ERROR_TARGET_FAILURE;
- goto restore;
- }
-
- // no debug, otherwise breakpoint is not set
- CHECK_RETVAL(target_resume(target, 0, entry_point, 1, 0));
-
- CHECK_RETVAL(target_wait_state(target, TARGET_HALTED, timeout_ms));
-
- if (target->state != TARGET_HALTED)
- {
- CHECK_RETVAL(target_halt(target));
-
- CHECK_RETVAL(target_wait_state(target, TARGET_HALTED, 500));
-
- retval = ERROR_TARGET_TIMEOUT;
-
- goto del_breakpoint;
- }
-
- if (buf_get_u32(arm11->reg_list[15].value, 0, 32) != exit_point)
- {
- LOG_WARNING("target reentered debug state, but not at the desired exit point: 0x%4.4" PRIx32 "",
- buf_get_u32(arm11->reg_list[15].value, 0, 32));
- retval = ERROR_TARGET_TIMEOUT;
- goto del_breakpoint;
- }
-
- for (int i = 0; i < num_mem_params; i++)
- {
- if (mem_params[i].direction != PARAM_OUT)
- target_read_buffer(target, mem_params[i].address, mem_params[i].size, mem_params[i].value);
- }
-
- for (int i = 0; i < num_reg_params; i++)
- {
- if (reg_params[i].direction != PARAM_OUT)
- {
- struct reg *reg = register_get_by_name(arm11->core_cache, reg_params[i].reg_name, 0);
- if (!reg)
- {
- LOG_ERROR("BUG: register '%s' not found", reg_params[i].reg_name);
- retval = ERROR_INVALID_ARGUMENTS;
- goto del_breakpoint;
- }
-
- if (reg->size != reg_params[i].size)
- {
- LOG_ERROR("BUG: register '%s' size doesn't match reg_params[i].size", reg_params[i].reg_name);
- retval = ERROR_INVALID_ARGUMENTS;
- goto del_breakpoint;
- }
-
- buf_set_u32(reg_params[i].value, 0, 32, buf_get_u32(reg->value, 0, 32));
- }
- }
-
-del_breakpoint:
- breakpoint_remove(target, exit_point);
-
-restore:
- // Restore context
- for (size_t i = 0; i < 16; i++)
- {
- LOG_DEBUG("restoring register %s with value 0x%8.8" PRIx32 "",
- arm11->reg_list[i].name, context[i]);
- arm11_set_reg(&arm11->reg_list[i], (uint8_t*)&context[i]);
- }
- LOG_DEBUG("restoring CPSR with value 0x%8.8" PRIx32 "", cpsr);
- arm11_set_reg(&arm11->reg_list[ARM11_RC_CPSR], (uint8_t*)&cpsr);
-
-// arm11->core_state = core_state;
-// arm11->core_mode = core_mode;
-
- return retval;
-}
-
static int arm11_target_create(struct target *target, Jim_Interp *interp)
{
struct arm11_common *arm11;
if (!arm11)
return ERROR_FAIL;
- armv4_5_init_arch_info(target, &arm11->arm);
-
- arm11->target = target;
+ arm_init_arch_info(target, &arm11->arm);
arm11->jtag_info.tap = target->tap;
arm11->jtag_info.scann_size = 5;
arm11->jtag_info.scann_instr = ARM11_SCAN_N;
- /* cur_scan_chain == 0 */
+ arm11->jtag_info.cur_scan_chain = ~0; /* invalid/unknown */
arm11->jtag_info.intest_instr = ARM11_INTEST;
return ERROR_OK;
struct target *target)
{
/* Initialize anything we can set up without talking to the target */
-
- /* FIXME Switch to use the standard build_reg_cache() not custom
- * code. Do it from examine(), after we check whether we're
- * an arm1176 and thus support the Secure Monitor mode.
- */
- return arm11_build_reg_cache(target);
+ return ERROR_OK;
}
/* talk to the target and set things up */
CHECK_RETVAL(jtag_execute_queue());
- switch (device_id & 0x0FFFF000)
+ /* assume the manufacturer id is ok; check the part # */
+ switch ((device_id >> 12) & 0xFFFF)
{
- case 0x07B36000:
+ case 0x7B36:
type = "ARM1136";
break;
- case 0x07B56000:
+ case 0x7B37:
+ type = "ARM11 MPCore";
+ break;
+ case 0x7B56:
type = "ARM1156";
break;
- case 0x07B76000:
+ case 0x7B76:
arm11->arm.core_type = ARM_MODE_MON;
type = "ARM1176";
break;
default:
- LOG_ERROR("'target arm11' expects IDCODE 0x*7B*7****");
+ LOG_ERROR("unexpected ARM11 ID code");
return ERROR_FAIL;
}
LOG_INFO("found %s", type);
}
arm11->brp = ((didr >> 24) & 0x0F) + 1;
- arm11->wrp = ((didr >> 28) & 0x0F) + 1;
/** \todo TODO: reserve one brp slot if we allow breakpoints during step */
arm11->free_brps = arm11->brp;
- arm11->free_wrps = arm11->wrp;
LOG_DEBUG("IDCODE %08" PRIx32 " IMPLEMENTOR %02x DIDR %08" PRIx32,
device_id, implementor, didr);
* as suggested by the spec.
*/
- retval = arm11_check_init(arm11, NULL);
+ retval = arm11_check_init(arm11);
if (retval != ERROR_OK)
return retval;
/* Build register cache "late", after target_init(), since we
* want to know if this core supports Secure Monitor mode.
*/
- if (!target_was_examined(target)) {
- arm11_dpm_init(arm11, didr);
- retval = arm_dpm_setup(&arm11->dpm);
- }
+ if (!target_was_examined(target))
+ retval = arm11_dpm_init(arm11, didr);
/* ETM on ARM11 still uses original scanchain 6 access mode */
if (arm11->arm.etm && !target_was_examined(target)) {
}
-/** Load a register that is marked !valid in the register cache */
-static int arm11_get_reg(struct reg *reg)
-{
- struct target * target = ((struct arm11_reg_state *)reg->arch_info)->target;
-
- if (target->state != TARGET_HALTED)
- {
- LOG_WARNING("target was not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /** \todo TODO: Check this. We assume that all registers are fetched at debug entry. */
-
-#if 0
- struct arm11_common *arm11 = target_to_arm11(target);
- const struct arm11_reg_defs *arm11_reg_info = arm11_reg_defs + ((struct arm11_reg_state *)reg->arch_info)->def_index;
-#endif
-
- return ERROR_OK;
-}
-
-/** Change a value in the register cache */
-static int arm11_set_reg(struct reg *reg, uint8_t *buf)
-{
- struct target *target = ((struct arm11_reg_state *)reg->arch_info)->target;
- struct arm11_common *arm11 = target_to_arm11(target);
-// const struct arm11_reg_defs *arm11_reg_info = arm11_reg_defs + ((struct arm11_reg_state *)reg->arch_info)->def_index;
-
- arm11->reg_values[((struct arm11_reg_state *)reg->arch_info)->def_index] = buf_get_u32(buf, 0, 32);
- reg->valid = 1;
- reg->dirty = 1;
-
- return ERROR_OK;
-}
-
-static const struct reg_arch_type arm11_reg_type = {
- .get = arm11_get_reg,
- .set = arm11_set_reg,
-};
-
-static int arm11_build_reg_cache(struct target *target)
-{
- struct arm11_common *arm11 = target_to_arm11(target);
- struct reg_cache *cache;
- struct reg *reg_list;
- struct arm11_reg_state *arm11_reg_states;
-
- cache = calloc(1, sizeof *cache);
- reg_list = calloc(ARM11_REGCACHE_COUNT, sizeof *reg_list);
- arm11_reg_states = calloc(ARM11_REGCACHE_COUNT,
- sizeof *arm11_reg_states);
- if (!cache || !reg_list || !arm11_reg_states) {
- free(cache);
- free(reg_list);
- free(arm11_reg_states);
- return ERROR_FAIL;
- }
-
- arm11->reg_list = reg_list;
-
- /* Build the process context cache */
- cache->name = "arm11 registers";
- cache->next = NULL;
- cache->reg_list = reg_list;
- cache->num_regs = ARM11_REGCACHE_COUNT;
-
- struct reg_cache **cache_p = register_get_last_cache_p(&target->reg_cache);
- (*cache_p) = cache;
-
- arm11->core_cache = cache;
-// armv7m->process_context = cache;
-
- size_t i;
-
- /* Not very elegant assertion */
- if (ARM11_REGCACHE_COUNT != ARRAY_SIZE(arm11->reg_values) ||
- ARM11_REGCACHE_COUNT != ARRAY_SIZE(arm11_reg_defs) ||
- ARM11_REGCACHE_COUNT != ARM11_RC_MAX)
- {
- LOG_ERROR("BUG: arm11->reg_values inconsistent (%d %u %u %d)",
- ARM11_REGCACHE_COUNT,
- (unsigned) ARRAY_SIZE(arm11->reg_values),
- (unsigned) ARRAY_SIZE(arm11_reg_defs),
- ARM11_RC_MAX);
- /* FIXME minimally, use a build_bug_on(X) mechanism;
- * runtime exit() here is bad!
- */
- exit(-1);
- }
-
- for (i = 0; i < ARM11_REGCACHE_COUNT; i++)
- {
- struct reg * r = reg_list + i;
- const struct arm11_reg_defs * rd = arm11_reg_defs + i;
- struct arm11_reg_state * rs = arm11_reg_states + i;
-
- r->name = rd->name;
- r->size = 32;
- r->value = (uint8_t *)(arm11->reg_values + i);
- r->dirty = 0;
- r->valid = 0;
- r->type = &arm11_reg_type;
- r->arch_info = rs;
-
- rs->def_index = i;
- rs->target = target;
- }
-
- return ERROR_OK;
-}
-
/* FIXME all these BOOL_WRAPPER things should be modifying
* per-instance state, not shared state; ditto the vector
* catch register support. Scan chains with multiple cores
return ERROR_OK;
}
-static const uint32_t arm11_coproc_instruction_limits[] =
-{
- 15, /* coprocessor */
- 7, /* opcode 1 */
- 15, /* CRn */
- 15, /* CRm */
- 7, /* opcode 2 */
- 0xFFFFFFFF, /* value */
+static const struct command_registration arm11_mw_command_handlers[] = {
+ {
+ .name = "burst",
+ .handler = arm11_handle_bool_memwrite_burst,
+ .mode = COMMAND_ANY,
+ .help = "Display or modify flag controlling potentially "
+ "risky fast burst mode (default: enabled)",
+ .usage = "['enable'|'disable']",
+ },
+ {
+ .name = "error_fatal",
+ .handler = arm11_handle_bool_memwrite_error_fatal,
+ .mode = COMMAND_ANY,
+ .help = "Display or modify flag controlling transfer "
+ "termination on transfer errors"
+ " (default: enabled)",
+ .usage = "['enable'|'disable']",
+ },
+ COMMAND_REGISTRATION_DONE
};
-
-static int arm11_mrc_inner(struct target *target, int cpnum,
- uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm,
- uint32_t *value, bool read)
-{
- int retval;
- struct arm11_common *arm11 = target_to_arm11(target);
-
- if (target->state != TARGET_HALTED)
+static const struct command_registration arm11_any_command_handlers[] = {
{
- LOG_ERROR("Target not halted");
- return ERROR_FAIL;
- }
-
- uint32_t instr = 0xEE000010 |
- (cpnum << 8) |
- (op1 << 21) |
- (CRn << 16) |
- (CRm << 0) |
- (op2 << 5);
-
- if (read)
- instr |= 0x00100000;
-
- retval = arm11_run_instr_data_prepare(arm11);
- if (retval != ERROR_OK)
- return retval;
-
- if (read)
+ /* "hardware_step" is only here to check if the default
+ * simulate + breakpoint implementation is broken.
+ * TEMPORARY! NOT DOCUMENTED! */
+ .name = "hardware_step",
+ .handler = arm11_handle_bool_hardware_step,
+ .mode = COMMAND_ANY,
+ .help = "DEBUG ONLY - Hardware single stepping"
+ " (default: disabled)",
+ .usage = "['enable'|'disable']",
+ },
{
- retval = arm11_run_instr_data_from_core_via_r0(arm11, instr, value);
- if (retval != ERROR_OK)
- return retval;
- }
- else
+ .name = "memwrite",
+ .mode = COMMAND_ANY,
+ .help = "memwrite command group",
+ .chain = arm11_mw_command_handlers,
+ },
{
- retval = arm11_run_instr_data_to_core_via_r0(arm11, instr, *value);
- if (retval != ERROR_OK)
- return retval;
- }
-
- return arm11_run_instr_data_finish(arm11);
-}
-
-static int arm11_mrc(struct target *target, int cpnum,
- uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t *value)
-{
- return arm11_mrc_inner(target, cpnum, op1, op2, CRn, CRm, value, true);
-}
-
-static int arm11_mcr(struct target *target, int cpnum,
- uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t value)
-{
- return arm11_mrc_inner(target, cpnum, op1, op2, CRn, CRm, &value, false);
-}
-
-static int arm11_register_commands(struct command_context *cmd_ctx)
-{
- struct command *top_cmd, *mw_cmd;
-
- armv4_5_register_commands(cmd_ctx);
-
- top_cmd = register_command(cmd_ctx, NULL, "arm11",
- NULL, COMMAND_ANY, NULL);
-
- /* "hardware_step" is only here to check if the default
- * simulate + breakpoint implementation is broken.
- * TEMPORARY! NOT DOCUMENTED!
- */
- register_command(cmd_ctx, top_cmd, "hardware_step",
- arm11_handle_bool_hardware_step, COMMAND_ANY,
- "DEBUG ONLY - Hardware single stepping"
- " (default: disabled)");
-
- mw_cmd = register_command(cmd_ctx, top_cmd, "memwrite",
- NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, mw_cmd, "burst",
- arm11_handle_bool_memwrite_burst, COMMAND_ANY,
- "Enable/Disable non-standard but fast burst mode"
- " (default: enabled)");
- register_command(cmd_ctx, mw_cmd, "error_fatal",
- arm11_handle_bool_memwrite_error_fatal, COMMAND_ANY,
- "Terminate program if transfer error was found"
- " (default: enabled)");
-
- register_command(cmd_ctx, top_cmd, "step_irq_enable",
- arm11_handle_bool_step_irq_enable, COMMAND_ANY,
- "Enable interrupts while stepping"
- " (default: disabled)");
- register_command(cmd_ctx, top_cmd, "vcr",
- arm11_handle_vcr, COMMAND_ANY,
- "Control (Interrupt) Vector Catch Register");
-
- return etm_register_commands(cmd_ctx);
-}
+ .name = "step_irq_enable",
+ .handler = arm11_handle_bool_step_irq_enable,
+ .mode = COMMAND_ANY,
+ .help = "Display or modify flag controlling interrupt "
+ "enable while stepping (default: disabled)",
+ .usage = "['enable'|'disable']",
+ },
+ {
+ .name = "vcr",
+ .handler = arm11_handle_vcr,
+ .mode = COMMAND_ANY,
+ .help = "Display or modify Vector Catch Register",
+ .usage = "[value]",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+static const struct command_registration arm11_command_handlers[] = {
+ {
+ .chain = arm_command_handlers,
+ },
+ {
+ .chain = etm_command_handlers,
+ },
+ {
+ .name = "arm11",
+ .mode = COMMAND_ANY,
+ .help = "ARM11 command group",
+ .chain = arm11_any_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
/** Holds methods for ARM11xx targets. */
struct target_type arm11_target = {
.deassert_reset = arm11_deassert_reset,
.soft_reset_halt = arm11_soft_reset_halt,
- .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
+ .get_gdb_reg_list = arm_get_gdb_reg_list,
.read_memory = arm11_read_memory,
.write_memory = arm11_write_memory,
.add_breakpoint = arm11_add_breakpoint,
.remove_breakpoint = arm11_remove_breakpoint,
- .add_watchpoint = arm11_add_watchpoint,
- .remove_watchpoint = arm11_remove_watchpoint,
- .run_algorithm = arm11_run_algorithm,
+ .run_algorithm = armv4_5_run_algorithm,
- .register_commands = arm11_register_commands,
+ .commands = arm11_command_handlers,
.target_create = arm11_target_create,
.init_target = arm11_init_target,
.examine = arm11_examine,
-
- .mrc = arm11_mrc,
- .mcr = arm11_mcr,
};