};
-static int arm11_add_ir_scan_vc(int num_fields, struct scan_field *fields,
+/* REVISIT no error handling here! */
+static void arm11_add_ir_scan_vc(int num_fields, struct scan_field *fields,
tap_state_t state)
{
if (cmd_queue_cur_state == TAP_IRPAUSE)
jtag_add_pathmove(ARRAY_SIZE(arm11_move_pi_to_si_via_ci), arm11_move_pi_to_si_via_ci);
jtag_add_ir_scan(num_fields, fields, state);
- return ERROR_OK;
}
static const tap_state_t arm11_move_pd_to_sd_via_cd[] =
TAP_DREXIT2, TAP_DRUPDATE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
};
-int arm11_add_dr_scan_vc(int num_fields, struct scan_field *fields, tap_state_t state)
+/* REVISIT no error handling here! */
+void arm11_add_dr_scan_vc(int num_fields, struct scan_field *fields,
+ tap_state_t state)
{
if (cmd_queue_cur_state == TAP_DRPAUSE)
jtag_add_pathmove(ARRAY_SIZE(arm11_move_pd_to_sd_via_cd), arm11_move_pd_to_sd_via_cd);
jtag_add_dr_scan(num_fields, fields, state);
- return ERROR_OK;
}
* <em > (data is written when the JTAG queue is executed)</em>
* \param field target data structure that will be initialized
*/
-void arm11_setup_field(struct arm11_common * arm11, int num_bits, void * out_data, void * in_data, struct scan_field * field)
+void arm11_setup_field(struct arm11_common *arm11, int num_bits,
+ void *out_data, void *in_data, struct scan_field *field)
{
field->tap = arm11->arm.target->tap;
field->num_bits = num_bits;
arm11_add_ir_scan_vc(1, &field, state == ARM11_TAP_DEFAULT ? TAP_IRPAUSE : state);
}
-/** Verify shifted out data from Scan Chain Register (SCREG)
- * Used as parameter to struct scan_field::in_handler in
- * arm11_add_debug_SCAN_N().
- *
- */
+/** Verify data shifted out from Scan Chain Register (SCREG). */
static void arm11_in_handler_SCAN_N(uint8_t *in_value)
{
- /** \todo TODO: clarify why this isnt properly masked in core.c jtag_read_buffer() */
+ /* Don't expect JTAG layer to modify bits we didn't ask it to read */
uint8_t v = *in_value & 0x1F;
if (v != 0x10)
{
- LOG_ERROR("'arm11 target' JTAG communication error SCREG SCAN OUT 0x%02x (expected 0x10)", v);
+ LOG_ERROR("'arm11 target' JTAG error SCREG OUT 0x%02x", v);
jtag_set_error(ERROR_FAIL);
}
-
- if (v != 0x10)
- JTAG_DEBUG("SCREG SCAN OUT 0x%02x", v);
}
/** Select and write to Scan Chain Register (SCREG)
return jtag_execute_queue();
}
-/** Write an instruction into the ITR register
+/**
+ * Queue a DR scan of the ITR register. Caller must have selected
+ * scan chain 4 (ITR), possibly using ITRSEL.
*
* \param arm11 Target state variable.
* \param inst An ARM11 processor instruction/opcode.
- * \param flag Optional parameter to retrieve the InstCompl flag
- * (this will be written when the JTAG chain is executed).
- * \param state Pass the final TAP state or ARM11_TAP_DEFAULT for the default
- * value (Run-Test/Idle).
+ * \param flag Optional parameter to retrieve the Ready flag;
+ * this address will be written when the JTAG chain is scanned.
+ * \param state The TAP state to enter after the DR scan.
*
- * \remarks By default this ends with Run-Test/Idle state
- * and causes the instruction to be executed. If
- * a subsequent write to DTR is needed before
- * executing the instruction then TAP_DRPAUSE should be
- * passed to \p state.
+ * Going through the TAP_DRUPDATE state writes ITR only if Ready was
+ * previously set. Only the Ready flag is readable by the scan.
*
- * \remarks This adds to the JTAG command queue but does \em not execute it.
+ * An instruction loaded into ITR is executed when going through the
+ * TAP_IDLE state only if Ready was previously set and the debug state
+ * is properly set up. Depending on the instruction, you may also need
+ * to ensure that the rDTR is ready before that Run-Test/Idle state.
*/
static void arm11_add_debug_INST(struct arm11_common * arm11,
uint32_t inst, uint8_t * flag, tap_state_t state)
arm11_setup_field(arm11, 32, &inst, NULL, itr + 0);
arm11_setup_field(arm11, 1, NULL, flag, itr + 1);
- arm11_add_dr_scan_vc(ARRAY_SIZE(itr), itr, state == ARM11_TAP_DEFAULT ? TAP_IDLE : state);
+ arm11_add_dr_scan_vc(ARRAY_SIZE(itr), itr, state);
}
/**
-/** Execute one or multiple instructions via ITR
+/**
+ * Execute one or more instructions via ITR.
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
*
* \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
*
/** Execute one instruction via ITR repeatedly while
* passing data to the core via DTR on each execution.
*
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
* The executed instruction \em must read data from DTR.
*
* \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
/** Execute one instruction via ITR repeatedly while
* passing data to the core via DTR on each execution.
*
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
* No Ready check during transmission.
*
* The executed instruction \em must read data from DTR.
/** Execute one instruction via ITR repeatedly while
* reading data from the core via DTR on each execution.
*
+ * Caller guarantees that processor is in debug state, that DSCR_ITR_EN
+ * is set, the ITR Ready flag is set (as seen on the previous entry to
+ * TAP_DRCAPTURE), and the DSCR sticky abort flag is clear.
+ *
* The executed instruction \em must write data to DTR.
*
* \pre arm11_run_instr_data_prepare() / arm11_run_instr_data_finish() block
AddressOut = 0;
}
- do
+ /* Timeout here so we don't get stuck. */
+ int i = 0;
+ while (1)
{
JTAG_DEBUG("SC7 <= c%-3d Data %08x %s",
(unsigned) AddressOut,
CHECK_RETVAL(jtag_execute_queue());
- if (!Ready)
- JTAG_DEBUG("SC7 => !ready");
+ /* 'nRW' is 'Ready' on read out */
+ if (Ready)
+ break;
+
+ long long then = 0;
+
+ if (i == 1000)
+ {
+ then = timeval_ms();
+ }
+ if (i >= 1000)
+ {
+ if ((timeval_ms()-then) > 1000)
+ {
+ LOG_WARNING("Timeout (1000ms) waiting for instructions to complete");
+ return ERROR_FAIL;
+ }
+ }
+
+ i++;
}
- while (!Ready); /* 'nRW' is 'Ready' on read out */
if (!nRW)
JTAG_DEBUG("SC7 => Data %08x", (unsigned) DataIn);