#endif
#include "arm920t.h"
-#include "time_support.h"
+#include <helper/time_support.h>
#include "target_type.h"
#include "register.h"
+#include "arm_opcodes.h"
/*
* 6 ... ETM9
* 15 ... access coprocessor 15, "physical" or "interpreted" modes
* "interpreted" works with a few actual MRC/MCR instructions
- * "physical" provides register-like behaviors.
+ * "physical" provides register-like behaviors. Section 9.6.7
+ * covers these details.
*
* The ARM922T is similar, but with smaller caches (8K each, vs 16K).
*/
#define _DEBUG_INSTRUCTION_EXECUTION_
#endif
+/* Table 9-8 shows scan chain 15 format during physical access mode, using a
+ * dedicated 6-bit address space (encoded in bits 33:38). Writes use one
+ * JTAG scan, while reads use two.
+ *
+ * Table 9-9 lists the thirteen registers which support physical access.
+ * ARM920T_CP15_PHYS_ADDR() constructs the 6-bit reg_addr parameter passed
+ * to arm920t_read_cp15_physical() and arm920t_write_cp15_physical().
+ *
+ * x == bit[38]
+ * y == bits[37:34]
+ * z == bit[33]
+ */
#define ARM920T_CP15_PHYS_ADDR(x, y, z) ((x << 5) | (y << 1) << (z))
+/* Registers supporting physical Read access (from table 9-9) */
+#define CP15PHYS_CACHETYPE ARM920T_CP15_PHYS_ADDR(0, 0x0, 1)
+#define CP15PHYS_ICACHE_IDX ARM920T_CP15_PHYS_ADDR(1, 0xd, 1)
+#define CP15PHYS_DCACHE_IDX ARM920T_CP15_PHYS_ADDR(1, 0xe, 1)
+/* NOTE: several more registers support only physical read access */
+
+/* Registers supporting physical Read/Write access (from table 9-9) */
+#define CP15PHYS_CTRL ARM920T_CP15_PHYS_ADDR(0, 0x1, 0)
+#define CP15PHYS_PID ARM920T_CP15_PHYS_ADDR(0, 0xd, 0)
+#define CP15PHYS_TESTSTATE ARM920T_CP15_PHYS_ADDR(0, 0xf, 0)
+#define CP15PHYS_ICACHE ARM920T_CP15_PHYS_ADDR(1, 0x1, 1)
+#define CP15PHYS_DCACHE ARM920T_CP15_PHYS_ADDR(1, 0x2, 1)
+
static int arm920t_read_cp15_physical(struct target *target,
int reg_addr, uint32_t *value)
{
return ERROR_OK;
}
+/* See table 9-10 for scan chain 15 format during interpreted access mode.
+ * If the TESTSTATE register is set for interpreted access, certain CP15
+ * MRC and MCR instructions may be executed through scan chain 15.
+ *
+ * Tables 9-11, 9-12, and 9-13 show which MRC and MCR instructions can be
+ * executed using scan chain 15 interpreted mode.
+ */
static int arm920t_execute_cp15(struct target *target, uint32_t cp15_opcode,
uint32_t arm_opcode)
{
static int arm920t_read_cp15_interpreted(struct target *target,
uint32_t cp15_opcode, uint32_t address, uint32_t *value)
{
- struct arm *armv4_5 = target_to_armv4_5(target);
+ struct arm *armv4_5 = target_to_arm(target);
uint32_t* regs_p[1];
uint32_t regs[2];
uint32_t cp15c15 = 0x0;
+ struct reg *r = armv4_5->core_cache->reg_list;
/* load address into R1 */
regs[1] = address;
/* read-modify-write CP15 test state register
* to enable interpreted access mode */
- arm920t_read_cp15_physical(target, 0x1e, &cp15c15);
+ arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
jtag_execute_queue();
cp15c15 |= 1; /* set interpret mode */
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* execute CP15 instruction and ARM load (reading from coprocessor) */
arm920t_execute_cp15(target, cp15_opcode, ARMV4_5_LDR(0, 1));
/* disable interpreted access mode */
cp15c15 &= ~1U; /* clear interpret mode */
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* retrieve value from R0 */
regs_p[0] = value;
jtag_execute_queue();
#ifdef _DEBUG_INSTRUCTION_EXECUTION_
- LOG_DEBUG("cp15_opcode: %8.8x, address: %8.8x, value: %8.8x", cp15_opcode, address, *value);
+ LOG_DEBUG("cp15_opcode: %8.8x, address: %8.8x, value: %8.8x",
+ cp15_opcode, address, *value);
#endif
if (!is_arm_mode(armv4_5->core_mode))
return ERROR_FAIL;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).dirty = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 1).dirty = 1;
+ r[0].dirty = 1;
+ r[1].dirty = 1;
return ERROR_OK;
}
uint32_t cp15_opcode, uint32_t value, uint32_t address)
{
uint32_t cp15c15 = 0x0;
- struct arm *armv4_5 = target_to_armv4_5(target);
+ struct arm *armv4_5 = target_to_arm(target);
uint32_t regs[2];
+ struct reg *r = armv4_5->core_cache->reg_list;
/* load value, address into R0, R1 */
regs[0] = value;
/* read-modify-write CP15 test state register
* to enable interpreted access mode */
- arm920t_read_cp15_physical(target, 0x1e, &cp15c15);
+ arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
jtag_execute_queue();
cp15c15 |= 1; /* set interpret mode */
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* execute CP15 instruction and ARM store (writing to coprocessor) */
arm920t_execute_cp15(target, cp15_opcode, ARMV4_5_STR(0, 1));
/* disable interpreted access mode */
cp15c15 &= ~1U; /* set interpret mode */
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
#ifdef _DEBUG_INSTRUCTION_EXECUTION_
- LOG_DEBUG("cp15_opcode: %8.8x, value: %8.8x, address: %8.8x", cp15_opcode, value, address);
+ LOG_DEBUG("cp15_opcode: %8.8x, value: %8.8x, address: %8.8x",
+ cp15_opcode, value, address);
#endif
if (!is_arm_mode(armv4_5->core_mode))
return ERROR_FAIL;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).dirty = 1;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 1).dirty = 1;
+ r[0].dirty = 1;
+ r[1].dirty = 1;
return ERROR_OK;
}
int retval;
uint32_t ttb = 0x0;
- if ((retval = arm920t_read_cp15_interpreted(target, 0xeebf0f51, 0x0, &ttb)) != ERROR_OK)
+ if ((retval = arm920t_read_cp15_interpreted(target,
+ /* FIXME use opcode macro */
+ 0xeebf0f51, 0x0, &ttb)) != ERROR_OK)
return retval;
return ttb;
}
// EXPORTED to FA256
-void arm920t_disable_mmu_caches(struct target *target, int mmu, int d_u_cache, int i_cache)
+void arm920t_disable_mmu_caches(struct target *target, int mmu,
+ int d_u_cache, int i_cache)
{
uint32_t cp15_control;
/* read cp15 control register */
- arm920t_read_cp15_physical(target, 0x2, &cp15_control);
+ arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_control);
jtag_execute_queue();
if (mmu)
if (i_cache)
cp15_control &= ~0x1000U;
- arm920t_write_cp15_physical(target, 0x2, cp15_control);
+ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_control);
}
// EXPORTED to FA256
-void arm920t_enable_mmu_caches(struct target *target, int mmu, int d_u_cache, int i_cache)
+void arm920t_enable_mmu_caches(struct target *target, int mmu,
+ int d_u_cache, int i_cache)
{
uint32_t cp15_control;
/* read cp15 control register */
- arm920t_read_cp15_physical(target, 0x2, &cp15_control);
+ arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_control);
jtag_execute_queue();
if (mmu)
if (i_cache)
cp15_control |= 0x1000U;
- arm920t_write_cp15_physical(target, 0x2, cp15_control);
+ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_control);
}
// EXPORTED to FA256
struct arm920t_common *arm920t = target_to_arm920(target);
/* examine cp15 control reg */
- arm920t_read_cp15_physical(target, 0x2, &arm920t->cp15_control_reg);
+ arm920t_read_cp15_physical(target,
+ CP15PHYS_CTRL, &arm920t->cp15_control_reg);
jtag_execute_queue();
- LOG_DEBUG("cp15_control_reg: %8.8" PRIx32 "", arm920t->cp15_control_reg);
+ LOG_DEBUG("cp15_control_reg: %8.8" PRIx32, arm920t->cp15_control_reg);
if (arm920t->armv4_5_mmu.armv4_5_cache.ctype == -1)
{
uint32_t cache_type_reg;
/* identify caches */
- arm920t_read_cp15_physical(target, 0x1, &cache_type_reg);
+ arm920t_read_cp15_physical(target,
+ CP15PHYS_CACHETYPE, &cache_type_reg);
jtag_execute_queue();
- armv4_5_identify_cache(cache_type_reg, &arm920t->armv4_5_mmu.armv4_5_cache);
+ armv4_5_identify_cache(cache_type_reg,
+ &arm920t->armv4_5_mmu.armv4_5_cache);
}
- arm920t->armv4_5_mmu.mmu_enabled = (arm920t->cp15_control_reg & 0x1U) ? 1 : 0;
- arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = (arm920t->cp15_control_reg & 0x4U) ? 1 : 0;
- arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled = (arm920t->cp15_control_reg & 0x1000U) ? 1 : 0;
+ arm920t->armv4_5_mmu.mmu_enabled =
+ (arm920t->cp15_control_reg & 0x1U) ? 1 : 0;
+ arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled =
+ (arm920t->cp15_control_reg & 0x4U) ? 1 : 0;
+ arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled =
+ (arm920t->cp15_control_reg & 0x1000U) ? 1 : 0;
/* save i/d fault status and address register */
+ /* FIXME use opcode macros */
arm920t_read_cp15_interpreted(target, 0xee150f10, 0x0, &arm920t->d_fsr);
arm920t_read_cp15_interpreted(target, 0xee150f30, 0x0, &arm920t->i_fsr);
arm920t_read_cp15_interpreted(target, 0xee160f10, 0x0, &arm920t->d_far);
arm920t_read_cp15_interpreted(target, 0xee160f30, 0x0, &arm920t->i_far);
- LOG_DEBUG("D FSR: 0x%8.8" PRIx32 ", D FAR: 0x%8.8" PRIx32 ", I FSR: 0x%8.8" PRIx32 ", I FAR: 0x%8.8" PRIx32 "",
+ LOG_DEBUG("D FSR: 0x%8.8" PRIx32 ", D FAR: 0x%8.8" PRIx32
+ ", I FSR: 0x%8.8" PRIx32 ", I FAR: 0x%8.8" PRIx32,
arm920t->d_fsr, arm920t->d_far, arm920t->i_fsr, arm920t->i_far);
if (arm920t->preserve_cache)
{
/* read-modify-write CP15 test state register
* to disable I/D-cache linefills */
- arm920t_read_cp15_physical(target, 0x1e, &cp15c15);
+ arm920t_read_cp15_physical(target,
+ CP15PHYS_TESTSTATE, &cp15c15);
jtag_execute_queue();
cp15c15 |= 0x600;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
}
}
* to reenable I/D-cache linefills */
if (arm920t->preserve_cache)
{
- arm920t_read_cp15_physical(target, 0x1e, &cp15c15);
+ arm920t_read_cp15_physical(target,
+ CP15PHYS_TESTSTATE, &cp15c15);
jtag_execute_queue();
cp15c15 &= ~0x600U;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
}
}
armv4_5 = &arm920t->arm7_9_common.armv4_5_common;
- LOG_USER("target halted in %s state due to %s, current mode: %s\n"
- "cpsr: 0x%8.8" PRIx32 " pc: 0x%8.8" PRIx32 "\n"
- "MMU: %s, D-Cache: %s, I-Cache: %s",
- armv4_5_state_strings[armv4_5->core_state],
- Jim_Nvp_value2name_simple(nvp_target_debug_reason, target->debug_reason)->name,
- arm_mode_name(armv4_5->core_mode),
- buf_get_u32(armv4_5->cpsr->value, 0, 32),
- buf_get_u32(armv4_5->core_cache->reg_list[15].value, 0, 32),
- state[arm920t->armv4_5_mmu.mmu_enabled],
- state[arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
- state[arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled]);
+ arm_arch_state(target);
+ LOG_USER("MMU: %s, D-Cache: %s, I-Cache: %s",
+ state[arm920t->armv4_5_mmu.mmu_enabled],
+ state[arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled],
+ state[arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled]);
return ERROR_OK;
}
static int arm920_virt2phys(struct target *target,
uint32_t virt, uint32_t *phys)
{
- /** @todo Implement this! */
- LOG_ERROR("%s: not implemented", __func__);
- return ERROR_FAIL;
+ int type;
+ uint32_t cb;
+ int domain;
+ uint32_t ap;
+ struct arm920t_common *arm920t = target_to_arm920(target);
+
+ uint32_t ret = armv4_5_mmu_translate_va(target,
+ &arm920t->armv4_5_mmu, virt, &type, &cb, &domain, &ap);
+ if (type == -1)
+ {
+ return ret;
+ }
+ *phys = ret;
+ return ERROR_OK;
}
/** Reads a buffer, in the specified word size, with current MMU settings. */
-int arm920t_read_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
+int arm920t_read_memory(struct target *target, uint32_t address,
+ uint32_t size, uint32_t count, uint8_t *buffer)
{
int retval;
/** Writes a buffer, in the specified word size, with current MMU settings. */
-int arm920t_write_memory(struct target *target, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
+int arm920t_write_memory(struct target *target, uint32_t address,
+ uint32_t size, uint32_t count, uint8_t *buffer)
{
int retval;
+ const uint32_t cache_mask = ~0x1f; /* cache line size : 32 byte */
+ struct arm920t_common *arm920t = target_to_arm920(target);
- if ((retval = arm7_9_write_memory(target, address, size, count, buffer)) != ERROR_OK)
- return retval;
-
- /* This fn is used to write breakpoints, so we need to make sure
- * that the data cache is flushed and the instruction cache is
- * invalidated
- */
- if (((size == 4) || (size == 2)) && (count == 1))
+ /* FIX!!!! this should be cleaned up and made much more general. The
+ * plan is to write up and test on arm920t specifically and
+ * then generalize and clean up afterwards. */
+ if (arm920t->armv4_5_mmu.mmu_enabled && (count == 1) &&
+ ((size==2) || (size==4)))
{
- struct arm920t_common *arm920t = target_to_arm920(target);
+ /* special case the handling of single word writes to
+ * bypass MMU, to allow implementation of breakpoints
+ * in memory marked read only
+ * by MMU
+ */
+ int type;
+ uint32_t cb;
+ int domain;
+ uint32_t ap;
+ uint32_t pa;
+
+ /*
+ * We need physical address and cb
+ */
+ pa = armv4_5_mmu_translate_va(target, &arm920t->armv4_5_mmu,
+ address, &type, &cb, &domain, &ap);
+ if (type == -1)
+ return pa;
if (arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled)
{
- LOG_DEBUG("D-Cache enabled, flush and invalidate cache line");
- /* MCR p15,0,Rd,c7,c10,2 */
- retval = arm920t_write_cp15_interpreted(target, 0xee070f5e, 0x0, address);
+ if (cb & 0x1)
+ {
+ LOG_DEBUG("D-Cache buffered, "
+ "drain write buffer");
+ /*
+ * Buffered ?
+ * Drain write buffer - MCR p15,0,Rd,c7,c10,4
+ */
+
+ retval = arm920t_write_cp15_interpreted(target,
+ ARMV4_5_MCR(15, 0, 0, 7, 10, 4),
+ 0x0, 0);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ if (cb == 0x3)
+ {
+ /*
+ * Write back memory ? -> clean cache
+ *
+ * There is no way to clean cache lines using
+ * cp15 scan chain, so copy the full cache
+ * line from cache to physical memory.
+ */
+ uint8_t data[32];
+
+ LOG_DEBUG("D-Cache in 'write back' mode, "
+ "flush cache line");
+
+ retval = target_read_memory(target,
+ address & cache_mask, 1,
+ sizeof(data), &data[0]);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = armv4_5_mmu_write_physical(target,
+ &arm920t->armv4_5_mmu,
+ pa & cache_mask, 1,
+ sizeof(data), &data[0]);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ /* Cached ? */
+ if (cb & 0x2)
+ {
+ /*
+ * Cached ? -> Invalidate data cache using MVA
+ *
+ * MCR p15,0,Rd,c7,c6,1
+ */
+ LOG_DEBUG("D-Cache enabled, "
+ "invalidate cache line");
+
+ retval = arm920t_write_cp15_interpreted(target,
+ ARMV4_5_MCR(15, 0, 0, 7, 6, 1), 0x0,
+ address & cache_mask);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+ }
+
+ /* write directly to physical memory,
+ * bypassing any read only MMU bits, etc.
+ */
+ retval = armv4_5_mmu_write_physical(target,
+ &arm920t->armv4_5_mmu, pa, size,
+ count, buffer);
+ if (retval != ERROR_OK)
+ return retval;
+ } else
+ {
+ if ((retval = arm7_9_write_memory(target, address,
+ size, count, buffer)) != ERROR_OK)
+ return retval;
+ }
+
+ /* If ICache is enabled, we have to invalidate affected ICache lines
+ * the DCache is forced to write-through,
+ * so we don't have to clean it here
+ */
+ if (arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled)
+ {
+ if (count <= 1)
+ {
+ /* invalidate ICache single entry with MVA
+ * mcr 15, 0, r0, cr7, cr5, {1}
+ */
+ LOG_DEBUG("I-Cache enabled, "
+ "invalidating affected I-Cache line");
+ retval = arm920t_write_cp15_interpreted(target,
+ ARMV4_5_MCR(15, 0, 0, 7, 5, 1),
+ 0x0, address & cache_mask);
if (retval != ERROR_OK)
return retval;
}
-
- if (arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled)
+ else
{
- LOG_DEBUG("I-Cache enabled, invalidating affected I-Cache line");
- retval = arm920t_write_cp15_interpreted(target, 0xee070f35, 0x0, address);
+ /* invalidate ICache
+ * mcr 15, 0, r0, cr7, cr5, {0}
+ */
+ retval = arm920t_write_cp15_interpreted(target,
+ ARMV4_5_MCR(15, 0, 0, 7, 5, 0),
+ 0x0, 0x0);
if (retval != ERROR_OK)
return retval;
}
int timeout;
while (!(timeout = ((timeval_ms()-then) > 1000)))
{
- if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1) == 0)
+ if (buf_get_u32(dbg_stat->value, EICE_DBG_STATUS_DBGACK, 1)
+ == 0)
{
embeddedice_read_reg(dbg_stat);
if ((retval = jtag_execute_queue()) != ERROR_OK)
armv4_5->cpsr->dirty = 1;
/* start fetching from 0x0 */
- buf_set_u32(armv4_5->core_cache->reg_list[15].value, 0, 32, 0x0);
- armv4_5->core_cache->reg_list[15].dirty = 1;
- armv4_5->core_cache->reg_list[15].valid = 1;
+ buf_set_u32(armv4_5->pc->value, 0, 32, 0x0);
+ armv4_5->pc->dirty = 1;
+ armv4_5->pc->valid = 1;
arm920t_disable_mmu_caches(target, 1, 1, 1);
arm920t->armv4_5_mmu.mmu_enabled = 0;
arm920t->armv4_5_mmu.armv4_5_cache.d_u_cache_enabled = 0;
arm920t->armv4_5_mmu.armv4_5_cache.i_cache_enabled = 0;
- if ((retval = target_call_event_callbacks(target, TARGET_EVENT_HALTED)) != ERROR_OK)
- {
- return retval;
- }
-
- return ERROR_OK;
+ return target_call_event_callbacks(target, TARGET_EVENT_HALTED);
}
-int arm920t_init_arch_info(struct target *target, struct arm920t_common *arm920t, struct jtag_tap *tap)
+/* FIXME remove forward decls */
+static int arm920t_mrc(struct target *target, int cpnum,
+ uint32_t op1, uint32_t op2,
+ uint32_t CRn, uint32_t CRm,
+ uint32_t *value);
+static int arm920t_mcr(struct target *target, int cpnum,
+ uint32_t op1, uint32_t op2,
+ uint32_t CRn, uint32_t CRm,
+ uint32_t value);
+
+int arm920t_init_arch_info(struct target *target,
+ struct arm920t_common *arm920t, struct jtag_tap *tap)
{
struct arm7_9_common *arm7_9 = &arm920t->arm7_9_common;
+ arm7_9->armv4_5_common.mrc = arm920t_mrc;
+ arm7_9->armv4_5_common.mcr = arm920t_mcr;
+
/* initialize arm7/arm9 specific info (including armv4_5) */
arm9tdmi_init_arch_info(target, arm7_9, tap);
static int arm920t_target_create(struct target *target, Jim_Interp *interp)
{
- struct arm920t_common *arm920t = calloc(1,sizeof(struct arm920t_common));
+ struct arm920t_common *arm920t;
+ arm920t = calloc(1,sizeof(struct arm920t_common));
return arm920t_init_arch_info(target, arm920t, target->tap);
}
FILE *output;
struct arm920t_cache_line d_cache[8][64], i_cache[8][64];
int segment, index;
+ struct reg *r;
retval = arm920t_verify_pointer(CMD_CTX, arm920t);
if (retval != ERROR_OK)
regs_p[i] = ®s[i];
/* disable MMU and Caches */
- arm920t_read_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0x1, 0), &cp15_ctrl);
+ arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_ctrl);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
}
cp15_ctrl_saved = cp15_ctrl;
- cp15_ctrl &= ~(ARMV4_5_MMU_ENABLED | ARMV4_5_D_U_CACHE_ENABLED | ARMV4_5_I_CACHE_ENABLED);
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0x1, 0), cp15_ctrl);
+ cp15_ctrl &= ~(ARMV4_5_MMU_ENABLED
+ | ARMV4_5_D_U_CACHE_ENABLED | ARMV4_5_I_CACHE_ENABLED);
+ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl);
/* read CP15 test state register */
- arm920t_read_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), &cp15c15);
+ arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
jtag_execute_queue();
/* read DCache content */
fprintf(output, "DCache:\n");
/* go through segments 0 to nsets (8 on ARM920T, 4 on ARM922T) */
- for (segment = 0; segment < arm920t->armv4_5_mmu.armv4_5_cache.d_u_size.nsets; segment++)
+ for (segment = 0;
+ segment < arm920t->armv4_5_mmu.armv4_5_cache.d_u_size.nsets;
+ segment++)
{
fprintf(output, "\nsegment: %i\n----------", segment);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* D CAM Read, loads current victim into C15.C.D.Ind */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,6,2), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,2,0,15,6,2), ARMV4_5_LDR(1, 0));
/* read current victim */
- arm920t_read_cp15_physical(target, 0x3d, &C15_C_D_Ind);
+ arm920t_read_cp15_physical(target,
+ CP15PHYS_DCACHE_IDX, &C15_C_D_Ind);
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
for (index = 0; index < 64; index++)
{
- /* Ra: r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0) */
+ /* Ra:
+ * r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0)
+ */
regs[0] = 0x0 | (segment << 5) | (index << 26);
arm9tdmi_write_core_regs(target, 0x1, regs);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write DCache victim */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,0), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,9,1,0), ARMV4_5_LDR(1, 0));
/* Read D RAM */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,10,2), ARMV4_5_LDMIA(0, 0x1fe, 0, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,2,0,15,10,2),
+ ARMV4_5_LDMIA(0, 0x1fe, 0, 0));
/* Read D CAM */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,6,2), ARMV4_5_LDR(9, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,2,0,15,6,2),
+ ARMV4_5_LDR(9, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* read D RAM and CAM content */
arm9tdmi_read_core_regs(target, 0x3fe, regs_p);
/* mask LFSR[6] */
regs[9] &= 0xfffffffe;
- fprintf(output, "\nsegment: %i, index: %i, CAM: 0x%8.8" PRIx32 ", content (%s):\n", segment, index, regs[9], (regs[9] & 0x10) ? "valid" : "invalid");
+ fprintf(output, "\nsegment: %i, index: %i, CAM: 0x%8.8"
+ PRIx32 ", content (%s):\n",
+ segment, index, regs[9],
+ (regs[9] & 0x10) ? "valid" : "invalid");
for (i = 1; i < 9; i++)
{
d_cache[segment][index].data[i] = regs[i];
- fprintf(output, "%i: 0x%8.8" PRIx32 "\n", i-1, regs[i]);
+ fprintf(output, "%i: 0x%8.8" PRIx32 "\n",
+ i-1, regs[i]);
}
}
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write DCache victim */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,0), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,9,1,0), ARMV4_5_LDR(1, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
}
/* read ICache content */
fprintf(output, "ICache:\n");
/* go through segments 0 to nsets (8 on ARM920T, 4 on ARM922T) */
- for (segment = 0; segment < arm920t->armv4_5_mmu.armv4_5_cache.d_u_size.nsets; segment++)
+ for (segment = 0;
+ segment < arm920t->armv4_5_mmu.armv4_5_cache.d_u_size.nsets;
+ segment++)
{
fprintf(output, "segment: %i\n----------", segment);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* I CAM Read, loads current victim into C15.C.I.Ind */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,5,2), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,2,0,15,5,2), ARMV4_5_LDR(1, 0));
/* read current victim */
- arm920t_read_cp15_physical(target, 0x3b, &C15_C_I_Ind);
+ arm920t_read_cp15_physical(target, CP15PHYS_ICACHE_IDX,
+ &C15_C_I_Ind);
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
for (index = 0; index < 64; index++)
{
- /* Ra: r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0) */
+ /* Ra:
+ * r0 = index(31:26):SBZ(25:8):segment(7:5):SBZ(4:0)
+ */
regs[0] = 0x0 | (segment << 5) | (index << 26);
arm9tdmi_write_core_regs(target, 0x1, regs);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write ICache victim */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,1), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,9,1,1), ARMV4_5_LDR(1, 0));
/* Read I RAM */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,9,2), ARMV4_5_LDMIA(0, 0x1fe, 0, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,2,0,15,9,2),
+ ARMV4_5_LDMIA(0, 0x1fe, 0, 0));
/* Read I CAM */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,2,0,15,5,2), ARMV4_5_LDR(9, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,2,0,15,5,2),
+ ARMV4_5_LDR(9, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* read I RAM and CAM content */
arm9tdmi_read_core_regs(target, 0x3fe, regs_p);
/* mask LFSR[6] */
regs[9] &= 0xfffffffe;
- fprintf(output, "\nsegment: %i, index: %i, CAM: 0x%8.8" PRIx32 ", content (%s):\n", segment, index, regs[9], (regs[9] & 0x10) ? "valid" : "invalid");
+ fprintf(output, "\nsegment: %i, index: %i, "
+ "CAM: 0x%8.8" PRIx32 ", content (%s):\n",
+ segment, index, regs[9],
+ (regs[9] & 0x10) ? "valid" : "invalid");
for (i = 1; i < 9; i++)
{
i_cache[segment][index].data[i] = regs[i];
- fprintf(output, "%i: 0x%8.8" PRIx32 "\n", i-1, regs[i]);
+ fprintf(output, "%i: 0x%8.8" PRIx32 "\n",
+ i-1, regs[i]);
}
}
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write ICache victim */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,9,1,1), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,9,1,1), ARMV4_5_LDR(1, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
}
/* restore CP15 MMU and Cache settings */
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0x1, 0), cp15_ctrl_saved);
+ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl_saved);
- command_print(CMD_CTX, "cache content successfully output to %s", CMD_ARGV[0]);
+ command_print(CMD_CTX, "cache content successfully output to %s",
+ CMD_ARGV[0]);
fclose(output);
if (!is_arm_mode(armv4_5->core_mode))
return ERROR_FAIL;
- /* mark registers dirty. */
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 1).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 1).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 2).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 2).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 3).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 3).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 4).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 4).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 5).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 5).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 6).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 6).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 7).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 7).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 8).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 8).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 9).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 9).valid;
+ /* force writeback of the valid data */
+ r = armv4_5->core_cache->reg_list;
+ r[0].dirty = r[0].valid;
+ r[1].dirty = r[1].valid;
+ r[2].dirty = r[2].valid;
+ r[3].dirty = r[3].valid;
+ r[4].dirty = r[4].valid;
+ r[5].dirty = r[5].valid;
+ r[6].dirty = r[6].valid;
+ r[7].dirty = r[7].valid;
+
+ r = arm_reg_current(armv4_5, 8);
+ r->dirty = r->valid;
+
+ r = arm_reg_current(armv4_5, 9);
+ r->dirty = r->valid;
return ERROR_OK;
}
uint32_t Dlockdown, Ilockdown;
struct arm920t_tlb_entry d_tlb[64], i_tlb[64];
int victim;
+ struct reg *r;
retval = arm920t_verify_pointer(CMD_CTX, arm920t);
if (retval != ERROR_OK)
regs_p[i] = ®s[i];
/* disable MMU and Caches */
- arm920t_read_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0x1, 0), &cp15_ctrl);
+ arm920t_read_cp15_physical(target, CP15PHYS_CTRL, &cp15_ctrl);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
}
cp15_ctrl_saved = cp15_ctrl;
- cp15_ctrl &= ~(ARMV4_5_MMU_ENABLED | ARMV4_5_D_U_CACHE_ENABLED | ARMV4_5_I_CACHE_ENABLED);
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0x1, 0), cp15_ctrl);
+ cp15_ctrl &= ~(ARMV4_5_MMU_ENABLED
+ | ARMV4_5_D_U_CACHE_ENABLED | ARMV4_5_I_CACHE_ENABLED);
+ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl);
/* read CP15 test state register */
- arm920t_read_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), &cp15c15);
+ arm920t_read_cp15_physical(target, CP15PHYS_TESTSTATE, &cp15c15);
if ((retval = jtag_execute_queue()) != ERROR_OK)
{
return retval;
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* Read D TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MRC(15,0,0,10,0,0), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MRC(15,0,0,10,0,0), ARMV4_5_LDR(1, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* read D TLB lockdown stored to r1 */
arm9tdmi_read_core_regs(target, 0x2, regs_p);
for (victim = 0; victim < 64; victim += 8)
{
/* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
- * base remains unchanged, victim goes through entries 0 to 63 */
+ * base remains unchanged, victim goes through entries 0 to 63
+ */
regs[1] = (Dlockdown & 0xfc000000) | (victim << 20);
arm9tdmi_write_core_regs(target, 0x2, regs);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write D TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,10,0,0),
+ ARMV4_5_STR(1, 0));
/* Read D TLB CAM */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,6,4), ARMV4_5_LDMIA(0, 0x3fc, 0, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,4,0,15,6,4),
+ ARMV4_5_LDMIA(0, 0x3fc, 0, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* read D TLB CAM content stored to r2-r9 */
arm9tdmi_read_core_regs(target, 0x3fc, regs_p);
for (victim = 0; victim < 64; victim++)
{
/* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
- * base remains unchanged, victim goes through entries 0 to 63 */
+ * base remains unchanged, victim goes through entries 0 to 63
+ */
regs[1] = (Dlockdown & 0xfc000000) | (victim << 20);
arm9tdmi_write_core_regs(target, 0x2, regs);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write D TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
/* Read D TLB RAM1 */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,10,4), ARMV4_5_LDR(2,0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,4,0,15,10,4), ARMV4_5_LDR(2,0));
/* Read D TLB RAM2 */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,2,5), ARMV4_5_LDR(3,0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,4,0,15,2,5), ARMV4_5_LDR(3,0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* read D TLB RAM content stored to r2 and r3 */
arm9tdmi_read_core_regs(target, 0xc, regs_p);
arm9tdmi_write_core_regs(target, 0x2, regs);
/* Write D TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,10,0,0), ARMV4_5_STR(1, 0));
/* prepare reading I TLB content
* */
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* Read I TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MRC(15,0,0,10,0,1), ARMV4_5_LDR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MRC(15,0,0,10,0,1), ARMV4_5_LDR(1, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target, CP15PHYS_TESTSTATE, cp15c15);
/* read I TLB lockdown stored to r1 */
arm9tdmi_read_core_regs(target, 0x2, regs_p);
for (victim = 0; victim < 64; victim += 8)
{
/* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
- * base remains unchanged, victim goes through entries 0 to 63 */
+ * base remains unchanged, victim goes through entries 0 to 63
+ */
regs[1] = (Ilockdown & 0xfc000000) | (victim << 20);
arm9tdmi_write_core_regs(target, 0x2, regs);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write I TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,10,0,1),
+ ARMV4_5_STR(1, 0));
/* Read I TLB CAM */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,5,4), ARMV4_5_LDMIA(0, 0x3fc, 0, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,4,0,15,5,4),
+ ARMV4_5_LDMIA(0, 0x3fc, 0, 0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* read I TLB CAM content stored to r2-r9 */
arm9tdmi_read_core_regs(target, 0x3fc, regs_p);
for (victim = 0; victim < 64; victim++)
{
/* new lockdown value: base[31:26]:victim[25:20]:SBZ[19:1]:p[0]
- * base remains unchanged, victim goes through entries 0 to 63 */
+ * base remains unchanged, victim goes through entries 0 to 63
+ */
regs[1] = (Dlockdown & 0xfc000000) | (victim << 20);
arm9tdmi_write_core_regs(target, 0x2, regs);
/* set interpret mode */
cp15c15 |= 0x1;
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0xf, 0), cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* Write I TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
/* Read I TLB RAM1 */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,9,4), ARMV4_5_LDR(2,0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,4,0,15,9,4), ARMV4_5_LDR(2,0));
/* Read I TLB RAM2 */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,4,0,15,1,5), ARMV4_5_LDR(3,0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,4,0,15,1,5), ARMV4_5_LDR(3,0));
/* clear interpret mode */
cp15c15 &= ~0x1;
- arm920t_write_cp15_physical(target, 0x1e, cp15c15);
+ arm920t_write_cp15_physical(target,
+ CP15PHYS_TESTSTATE, cp15c15);
/* read I TLB RAM content stored to r2 and r3 */
arm9tdmi_read_core_regs(target, 0xc, regs_p);
arm9tdmi_write_core_regs(target, 0x2, regs);
/* Write I TLB lockdown */
- arm920t_execute_cp15(target, ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
+ arm920t_execute_cp15(target,
+ ARMV4_5_MCR(15,0,0,10,0,1), ARMV4_5_STR(1, 0));
/* restore CP15 MMU and Cache settings */
- arm920t_write_cp15_physical(target, ARM920T_CP15_PHYS_ADDR(0, 0x1, 0), cp15_ctrl_saved);
+ arm920t_write_cp15_physical(target, CP15PHYS_CTRL, cp15_ctrl_saved);
/* output data to file */
fprintf(output, "D TLB content:\n");
for (i = 0; i < 64; i++)
{
- fprintf(output, "%i: 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " %s\n", i, d_tlb[i].cam, d_tlb[i].ram1, d_tlb[i].ram2, (d_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)");
+ fprintf(output, "%i: 0x%8.8" PRIx32 " 0x%8.8" PRIx32
+ " 0x%8.8" PRIx32 " %s\n",
+ i, d_tlb[i].cam, d_tlb[i].ram1, d_tlb[i].ram2,
+ (d_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)");
}
fprintf(output, "\n\nI TLB content:\n");
for (i = 0; i < 64; i++)
{
- fprintf(output, "%i: 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " 0x%8.8" PRIx32 " %s\n", i, i_tlb[i].cam, i_tlb[i].ram1, i_tlb[i].ram2, (i_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)");
+ fprintf(output, "%i: 0x%8.8" PRIx32 " 0x%8.8" PRIx32
+ " 0x%8.8" PRIx32 " %s\n",
+ i, i_tlb[i].cam, i_tlb[i].ram1, i_tlb[i].ram2,
+ (i_tlb[i].cam & 0x20) ? "(valid)" : "(invalid)");
}
- command_print(CMD_CTX, "mmu content successfully output to %s", CMD_ARGV[0]);
+ command_print(CMD_CTX, "mmu content successfully output to %s",
+ CMD_ARGV[0]);
fclose(output);
if (!is_arm_mode(armv4_5->core_mode))
return ERROR_FAIL;
- /* mark registers dirty */
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 0).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 1).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 1).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 2).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 2).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 3).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 3).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 4).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 4).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 5).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 5).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 6).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 6).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 7).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 7).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 8).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 8).valid;
- ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 9).dirty = ARMV4_5_CORE_REG_MODE(armv4_5->core_cache, armv4_5->core_mode, 9).valid;
+ /* force writeback of the valid data */
+ r = armv4_5->core_cache->reg_list;
+ r[0].dirty = r[0].valid;
+ r[1].dirty = r[1].valid;
+ r[2].dirty = r[2].valid;
+ r[3].dirty = r[3].valid;
+ r[4].dirty = r[4].valid;
+ r[5].dirty = r[5].valid;
+ r[6].dirty = r[6].valid;
+ r[7].dirty = r[7].valid;
+
+ r = arm_reg_current(armv4_5, 8);
+ r->dirty = r->valid;
+
+ r = arm_reg_current(armv4_5, 9);
+ r->dirty = r->valid;
return ERROR_OK;
}
if (target->state != TARGET_HALTED)
{
- command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
+ command_print(CMD_CTX, "target must be stopped for "
+ "\"%s\" command", CMD_NAME);
return ERROR_OK;
}
- /* one or more argument, access a single register (write if second argument is given */
+ /* one argument, read a register.
+ * two arguments, write it.
+ */
if (CMD_ARGC >= 1)
{
int address;
if (CMD_ARGC == 1)
{
uint32_t value;
- if ((retval = arm920t_read_cp15_physical(target, address, &value)) != ERROR_OK)
+ if ((retval = arm920t_read_cp15_physical(target,
+ address, &value)) != ERROR_OK)
{
- command_print(CMD_CTX, "couldn't access reg %i", address);
+ command_print(CMD_CTX,
+ "couldn't access reg %i", address);
return ERROR_OK;
}
if ((retval = jtag_execute_queue()) != ERROR_OK)
return retval;
}
- command_print(CMD_CTX, "%i: %8.8" PRIx32 "", address, value);
+ command_print(CMD_CTX, "%i: %8.8" PRIx32,
+ address, value);
}
else if (CMD_ARGC == 2)
{
uint32_t value;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
- if ((retval = arm920t_write_cp15_physical(target, address, value)) != ERROR_OK)
+ retval = arm920t_write_cp15_physical(target,
+ address, value);
+ if (retval != ERROR_OK)
{
- command_print(CMD_CTX, "couldn't access reg %i", address);
+ command_print(CMD_CTX,
+ "couldn't access reg %i", address);
+ /* REVISIT why lie? "return retval"? */
return ERROR_OK;
}
- command_print(CMD_CTX, "%i: %8.8" PRIx32 "", address, value);
+ command_print(CMD_CTX, "%i: %8.8" PRIx32,
+ address, value);
}
}
if (target->state != TARGET_HALTED)
{
- command_print(CMD_CTX, "target must be stopped for \"%s\" command", CMD_NAME);
+ command_print(CMD_CTX, "target must be stopped for "
+ "\"%s\" command", CMD_NAME);
return ERROR_OK;
}
- /* one or more argument, access a single register (write if second argument is given */
+ /* one argument, read a register.
+ * two arguments, write it.
+ */
if (CMD_ARGC >= 1)
{
uint32_t opcode;
if (CMD_ARGC == 1)
{
uint32_t value;
- if ((retval = arm920t_read_cp15_interpreted(target, opcode, 0x0, &value)) != ERROR_OK)
+ retval = arm920t_read_cp15_interpreted(target,
+ opcode, 0x0, &value);
+ if (retval != ERROR_OK)
{
- command_print(CMD_CTX, "couldn't execute %8.8" PRIx32 "", opcode);
+ command_print(CMD_CTX,
+ "couldn't execute %8.8" PRIx32,
+ opcode);
+ /* REVISIT why lie? "return retval"? */
return ERROR_OK;
}
- command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 "", opcode, value);
+ command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32,
+ opcode, value);
}
else if (CMD_ARGC == 2)
{
uint32_t value;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
- if ((retval = arm920t_write_cp15_interpreted(target, opcode, value, 0)) != ERROR_OK)
+ retval = arm920t_write_cp15_interpreted(target,
+ opcode, value, 0);
+ if (retval != ERROR_OK)
{
- command_print(CMD_CTX, "couldn't execute %8.8" PRIx32 "", opcode);
+ command_print(CMD_CTX,
+ "couldn't execute %8.8" PRIx32,
+ opcode);
+ /* REVISIT why lie? "return retval"? */
return ERROR_OK;
}
- command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 "", opcode, value);
+ command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32,
+ opcode, value);
}
else if (CMD_ARGC == 3)
{
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], value);
uint32_t address;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], address);
- if ((retval = arm920t_write_cp15_interpreted(target, opcode, value, address)) != ERROR_OK)
+ retval = arm920t_write_cp15_interpreted(target,
+ opcode, value, address);
+ if (retval != ERROR_OK)
{
- command_print(CMD_CTX, "couldn't execute %8.8" PRIx32 "", opcode);
+ command_print(CMD_CTX,
+ "couldn't execute %8.8" PRIx32, opcode);
+ /* REVISIT why lie? "return retval"? */
return ERROR_OK;
}
- command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32 " %8.8" PRIx32 "", opcode, value, address);
+ command_print(CMD_CTX, "%8.8" PRIx32 ": %8.8" PRIx32
+ " %8.8" PRIx32, opcode, value, address);
}
}
else
{
- command_print(CMD_CTX, "usage: arm920t cp15i <opcode> [value] [address]");
+ command_print(CMD_CTX,
+ "usage: arm920t cp15i <opcode> [value] [address]");
}
return ERROR_OK;
if (retval != ERROR_OK)
return retval;
- return armv4_5_handle_cache_info_command(CMD_CTX, &arm920t->armv4_5_mmu.armv4_5_cache);
+ return armv4_5_handle_cache_info_command(CMD_CTX,
+ &arm920t->armv4_5_mmu.armv4_5_cache);
}
-static int arm920t_mrc(struct target *target, int cpnum, uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t *value)
+static int arm920t_mrc(struct target *target, int cpnum,
+ uint32_t op1, uint32_t op2,
+ uint32_t CRn, uint32_t CRm,
+ uint32_t *value)
{
if (cpnum!=15)
{
return ERROR_FAIL;
}
- return arm920t_read_cp15_interpreted(target, mrc_opcode(cpnum, op1, op2, CRn, CRm), 0, value);
+ /* read "to" r0 */
+ return arm920t_read_cp15_interpreted(target,
+ ARMV4_5_MRC(cpnum, op1, 0, CRn, CRm, op2),
+ 0, value);
}
-static int arm920t_mcr(struct target *target, int cpnum, uint32_t op1, uint32_t op2, uint32_t CRn, uint32_t CRm, uint32_t value)
+static int arm920t_mcr(struct target *target, int cpnum,
+ uint32_t op1, uint32_t op2,
+ uint32_t CRn, uint32_t CRm,
+ uint32_t value)
{
if (cpnum!=15)
{
return ERROR_FAIL;
}
- return arm920t_write_cp15_interpreted(target, mrc_opcode(cpnum, op1, op2, CRn, CRm), 0, value);
+ /* write "from" r0 */
+ return arm920t_write_cp15_interpreted(target,
+ ARMV4_5_MCR(cpnum, op1, 0, CRn, CRm, op2),
+ 0, value);
}
-/** Registers commands to access coprocessor, cache, and MMU resources. */
-int arm920t_register_commands(struct command_context *cmd_ctx)
-{
- int retval;
- struct command *arm920t_cmd;
-
- retval = arm9tdmi_register_commands(cmd_ctx);
-
- arm920t_cmd = register_command(cmd_ctx, NULL, "arm920t",
- NULL, COMMAND_ANY,
- "arm920t specific commands");
-
- register_command(cmd_ctx, arm920t_cmd, "cp15",
- arm920t_handle_cp15_command, COMMAND_EXEC,
- "display/modify cp15 register <num> [value]");
- register_command(cmd_ctx, arm920t_cmd, "cp15i",
- arm920t_handle_cp15i_command, COMMAND_EXEC,
- "display/modify cp15 (interpreted access) "
- "<opcode> [value] [address]");
- register_command(cmd_ctx, arm920t_cmd, "cache_info",
- arm920t_handle_cache_info_command, COMMAND_EXEC,
- "display information about target caches");
- register_command(cmd_ctx, arm920t_cmd, "read_cache",
- arm920t_handle_read_cache_command, COMMAND_EXEC,
- "display I/D cache content");
- register_command(cmd_ctx, arm920t_cmd, "read_mmu",
- arm920t_handle_read_mmu_command, COMMAND_EXEC,
- "display I/D mmu content");
-
- return retval;
-}
+static const struct command_registration arm920t_exec_command_handlers[] = {
+ {
+ .name = "cp15",
+ .handler = arm920t_handle_cp15_command,
+ .mode = COMMAND_EXEC,
+ .help = "display/modify cp15 register",
+ .usage = "regnum [value]",
+ },
+ {
+ .name = "cp15i",
+ .handler = arm920t_handle_cp15i_command,
+ .mode = COMMAND_EXEC,
+ /* prefer using less error-prone "arm mcr" or "arm mrc" */
+ .help = "display/modify cp15 register using ARM opcode"
+ " (DEPRECATED)",
+ .usage = "instruction [value [address]]",
+ },
+ {
+ .name = "cache_info",
+ .handler = arm920t_handle_cache_info_command,
+ .mode = COMMAND_EXEC,
+ .help = "display information about target caches",
+ },
+ {
+ .name = "read_cache",
+ .handler = arm920t_handle_read_cache_command,
+ .mode = COMMAND_EXEC,
+ .help = "dump I/D cache content to file",
+ .usage = "filename",
+ },
+ {
+ .name = "read_mmu",
+ .handler = arm920t_handle_read_mmu_command,
+ .mode = COMMAND_EXEC,
+ .help = "dump I/D mmu content to file",
+ .usage = "filename",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+const struct command_registration arm920t_command_handlers[] = {
+ {
+ .chain = arm9tdmi_command_handlers,
+ },
+ {
+ .name = "arm920t",
+ .mode = COMMAND_ANY,
+ .help = "arm920t command group",
+ .chain = arm920t_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
/** Holds methods for ARM920 targets. */
struct target_type arm920t_target =
.deassert_reset = arm7_9_deassert_reset,
.soft_reset_halt = arm920t_soft_reset_halt,
- .get_gdb_reg_list = armv4_5_get_gdb_reg_list,
+ .get_gdb_reg_list = arm_get_gdb_reg_list,
.read_memory = arm920t_read_memory,
.write_memory = arm920t_write_memory,
.add_watchpoint = arm7_9_add_watchpoint,
.remove_watchpoint = arm7_9_remove_watchpoint,
- .register_commands = arm920t_register_commands,
+ .commands = arm920t_command_handlers,
.target_create = arm920t_target_create,
.init_target = arm9tdmi_init_target,
.examine = arm7_9_examine,
- .mrc = arm920t_mrc,
- .mcr = arm920t_mcr,
+ .check_reset = arm7_9_check_reset,
};