}
}
- if (armv7m->post_restore_context)
- armv7m->post_restore_context(target);
-
return ERROR_OK;
}
/* ARMV7M is always in thumb mode, try to make GDB understand this
* if it does not support this arch */
- *((char*)armv7m->core_cache->reg_list[15].value) |= 1;
+ *((char*)armv7m->arm.pc->value) |= 1;
#else
(*reg_list)[25] = &armv7m->core_cache->reg_list[ARMV7M_xPSR];
#endif
int retval = ERROR_OK;
uint32_t context[ARMV7M_NUM_REGS];
+ /* NOTE: armv7m_run_algorithm requires that each algorithm uses a software breakpoint
+ * at the exit point */
+
if (armv7m_algorithm_info->common_magic != ARMV7M_COMMON_MAGIC)
{
LOG_ERROR("current target isn't an ARMV7M target");
armv7m->core_cache->reg_list[ARMV7M_CONTROL].valid = 1;
}
- /* REVISIT speed things up (3% or so in one case) by requiring
- * algorithms to include a BKPT instruction at each exit point.
- * This eliminates overheads of adding/removing a breakpoint.
- */
-
- /* ARMV7M always runs in Thumb state */
- if ((retval = breakpoint_add(target, exit_point, 2, BKPT_SOFT)) != ERROR_OK)
- {
- LOG_ERROR("can't add breakpoint to finish algorithm execution");
- return ERROR_TARGET_FAILURE;
- }
-
retval = armv7m_run_and_wait(target, entry_point, timeout_ms, exit_point, armv7m);
- breakpoint_remove(target, exit_point);
-
if (retval != ERROR_OK)
{
return retval;
int armv7m_arch_state(struct target *target)
{
struct armv7m_common *armv7m = target_to_armv7m(target);
+ struct arm *arm = &armv7m->arm;
uint32_t ctrl, sp;
ctrl = buf_get_u32(armv7m->core_cache->reg_list[ARMV7M_CONTROL].value, 0, 32);
sp = buf_get_u32(armv7m->core_cache->reg_list[ARMV7M_R13].value, 0, 32);
LOG_USER("target halted due to %s, current mode: %s %s\n"
- "xPSR: %#8.8" PRIx32 " pc: %#8.8" PRIx32 " %csp: %#8.8" PRIx32,
+ "xPSR: %#8.8" PRIx32 " pc: %#8.8" PRIx32 " %csp: %#8.8" PRIx32 "%s",
debug_reason_name(target),
armv7m_mode_strings[armv7m->core_mode],
armv7m_exception_string(armv7m->exception_number),
- buf_get_u32(armv7m->core_cache->reg_list[ARMV7M_xPSR].value, 0, 32),
- buf_get_u32(armv7m->core_cache->reg_list[ARMV7M_PC].value, 0, 32),
+ buf_get_u32(arm->cpsr->value, 0, 32),
+ buf_get_u32(arm->pc->value, 0, 32),
(ctrl & 0x02) ? 'p' : 'm',
- sp);
+ sp,
+ arm->is_semihosting ? ", semihosting" : "");
return ERROR_OK;
}
struct reg_cache *armv7m_build_reg_cache(struct target *target)
{
struct armv7m_common *armv7m = target_to_armv7m(target);
+ struct arm *arm = &armv7m->arm;
int num_regs = ARMV7M_NUM_REGS;
struct reg_cache **cache_p = register_get_last_cache_p(&target->reg_cache);
struct reg_cache *cache = malloc(sizeof(struct reg_cache));
reg_list[i].arch_info = &arch_info[i];
}
+ arm->cpsr = reg_list + ARMV7M_xPSR;
+ arm->pc = reg_list + ARMV7M_PC;
+ arm->core_cache = cache;
return cache;
}
+int armv7m_setup_semihosting(struct target *target, int enable)
+{
+ /* nothing todo for armv7m */
+ return ERROR_OK;
+}
+
/** Sets up target as a generic ARMv7-M core */
int armv7m_init_arch_info(struct target *target, struct armv7m_common *armv7m)
{
- /* register arch-specific functions */
+ struct arm *arm = &armv7m->arm;
+
+ armv7m->common_magic = ARMV7M_COMMON_MAGIC;
+
+ arm->core_type = ARM_MODE_THREAD;
+ arm->arch_info = armv7m;
+ arm->setup_semihosting = armv7m_setup_semihosting;
- target->arch_info = armv7m;
+ /* FIXME remove v7m-specific r/w core_reg functions;
+ * use the generic ARM core support..
+ */
armv7m->read_core_reg = armv7m_read_core_reg;
armv7m->write_core_reg = armv7m_write_core_reg;
- return ERROR_OK;
+ return arm_init_arch_info(target, arm);
}
/** Generates a CRC32 checksum of a memory region. */
/* ncomp: */
0x429C, /* cmp r4, r3 */
0xD1E9, /* bne nbyte */
- /* end: */
- 0xE7FE, /* b end */
+ 0xBE00, /* bkpt #0 */
0x1DB7, 0x04C1 /* CRC32XOR: .word 0x04C11DB7 */
};
0xEA02, 0x0203, /* and r2, r2, r3 */
0x3901, /* subs r1, r1, #1 */
0xD1F9, /* bne loop */
- /* end: */
- 0xE7FE, /* b end */
+ 0xBE00, /* bkpt #0 */
};
/* make sure we have a working area */
return ERROR_OK;
}
-/*--------------------------------------------------------------------------*/
-
-/*
- * Only stuff below this line should need to verify that its target
- * is an ARMv7-M node.
- *
- * FIXME yet none of it _does_ verify target types yet!
- */
-
-
-/*
- * Return the debug ap baseaddress in hexadecimal;
- * no extra output to simplify script processing
- */
-COMMAND_HANDLER(handle_dap_baseaddr_command)
+int armv7m_maybe_skip_bkpt_inst(struct target *target, bool *inst_found)
{
- struct target *target = get_current_target(CMD_CTX);
struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
- uint32_t apsel, apselsave, baseaddr;
- int retval;
+ struct reg *r = armv7m->arm.pc;
+ bool result = false;
- apselsave = swjdp->apsel;
- switch (CMD_ARGC) {
- case 0:
- apsel = swjdp->apsel;
- break;
- case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
- break;
- default:
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
- if (apselsave != apsel)
- dap_ap_select(swjdp, apsel);
+ /* if we halted last time due to a bkpt instruction
+ * then we have to manually step over it, otherwise
+ * the core will break again */
- /* NOTE: assumes we're talking to a MEM-AP, which
- * has a base address. There are other kinds of AP,
- * though they're not common for now. This should
- * use the ID register to verify it's a MEM-AP.
- */
- dap_ap_read_reg_u32(swjdp, AP_REG_BASE, &baseaddr);
- retval = swjdp_transaction_endcheck(swjdp);
- command_print(CMD_CTX, "0x%8.8" PRIx32 "", baseaddr);
-
- if (apselsave != apsel)
- dap_ap_select(swjdp, apselsave);
-
- return retval;
-}
-
-/*
- * Return the debug ap id in hexadecimal;
- * no extra output to simplify script processing
- */
-COMMAND_HANDLER(handle_dap_apid_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- return CALL_COMMAND_HANDLER(dap_apid_command, swjdp);
-}
-
-COMMAND_HANDLER(handle_dap_apsel_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- return CALL_COMMAND_HANDLER(dap_apsel_command, swjdp);
-}
-
-COMMAND_HANDLER(handle_dap_memaccess_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
-
- return CALL_COMMAND_HANDLER(dap_memaccess_command, swjdp);
-}
+ if (target->debug_reason == DBG_REASON_BREAKPOINT)
+ {
+ uint16_t op;
+ uint32_t pc = buf_get_u32(r->value, 0, 32);
+ pc &= ~1;
+ if (target_read_u16(target, pc, &op) == ERROR_OK)
+ {
+ if ((op & 0xFF00) == 0xBE00)
+ {
+ pc = buf_get_u32(r->value, 0, 32) + 2;
+ buf_set_u32(r->value, 0, 32, pc);
+ r->dirty = true;
+ r->valid = true;
+ result = true;
+ LOG_DEBUG("Skipping over BKPT instruction");
+ }
+ }
+ }
-COMMAND_HANDLER(handle_dap_info_command)
-{
- struct target *target = get_current_target(CMD_CTX);
- struct armv7m_common *armv7m = target_to_armv7m(target);
- struct swjdp_common *swjdp = &armv7m->swjdp_info;
- uint32_t apsel;
-
- switch (CMD_ARGC) {
- case 0:
- apsel = swjdp->apsel;
- break;
- case 1:
- COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], apsel);
- break;
- default:
- return ERROR_COMMAND_SYNTAX_ERROR;
+ if (inst_found) {
+ *inst_found = result;
}
- return dap_info_command(CMD_CTX, swjdp, apsel);
+ return ERROR_OK;
}
-static const struct command_registration armv7m_exec_command_handlers[] = {
- {
- .name = "info",
- .handler = &handle_dap_info_command,
- .mode = COMMAND_EXEC,
- .help = "dap info for ap [num], "
- "default currently selected AP",
- },
- {
- .name = "apsel",
- .handler = &handle_dap_apsel_command,
- .mode = COMMAND_EXEC,
- .help = "select a different AP [num] (default 0)",
- },
- {
- .name = "apid",
- .handler = &handle_dap_apid_command,
- .mode = COMMAND_EXEC,
- .help = "return id reg from AP [num], "
- "default currently selected AP",
- },
- {
- .name = "baseaddr",
- .handler = &handle_dap_baseaddr_command,
- .mode = COMMAND_EXEC,
- .help = "return debug base address from AP [num], "
- "default currently selected AP",
- },
+const struct command_registration armv7m_command_handlers[] = {
{
- .name = "memaccess",
- .handler = &handle_dap_memaccess_command,
- .mode = COMMAND_EXEC,
- .help = "set/get number of extra tck for mem-ap memory "
- "bus access [0-255]",
+ .chain = arm_command_handlers,
},
- COMMAND_REGISTRATION_DONE
-};
-const struct command_registration armv7m_command_handlers[] = {
{
- .name = "dap",
- .mode = COMMAND_EXEC,
- .help = "Cortex DAP command group",
- .chain = armv7m_exec_command_handlers,
+ .chain = dap_command_handlers,
},
COMMAND_REGISTRATION_DONE
};