* Copyright (C) 2005 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
- * Copyright (C) 2007,2008,2009 Øyvind Harboe *
+ * Copyright (C) 2007-2010 Øyvind Harboe *
* oyvind.harboe@zylin.com *
* *
* Copyright (C) 2008 by Spencer Oliver *
#endif
#include "embeddedice.h"
-
-#define ARRAY_SIZE(x) ((int)(sizeof(x)/sizeof((x)[0])))
-
-#if 0
-static bitfield_desc_t embeddedice_comms_ctrl_bitfield_desc[] =
-{
- {"R", 1},
- {"W", 1},
- {"reserved", 26},
- {"version", 4}
-};
-#endif
+#include "register.h"
+
+/**
+ * @file
+ *
+ * This provides lowlevel glue to the EmbeddedICE (or EmbeddedICE-RT)
+ * module found on scan chain 2 in ARM7, ARM9, and some other families
+ * of ARM cores. The module is called "EmbeddedICE-RT" if it has
+ * monitor mode support.
+ *
+ * EmbeddedICE provides basic watchpoint/breakpoint hardware and a Debug
+ * Communications Channel (DCC) used to read or write 32-bit words to
+ * OpenOCD-aware code running on the target CPU.
+ * Newer modules also include vector catch hardware. Some versions
+ * support hardware single-stepping, "monitor mode" debug (which is not
+ * currently supported by OpenOCD), or extended reporting on why the
+ * core entered debug mode.
+ */
/*
* From: ARM9E-S TRM, DDI 0165, table C-4 (and similar, for other cores)
};
-static int embeddedice_reg_arch_type = -1;
+static int embeddedice_get_reg(struct reg *reg)
+{
+ int retval;
+
+ if ((retval = embeddedice_read_reg(reg)) != ERROR_OK)
+ LOG_ERROR("error queueing EmbeddedICE register read");
+ else if ((retval = jtag_execute_queue()) != ERROR_OK)
+ LOG_ERROR("EmbeddedICE register read failed");
-static int embeddedice_get_reg(reg_t *reg);
+ return retval;
+}
+
+static const struct reg_arch_type eice_reg_type = {
+ .get = embeddedice_get_reg,
+ .set = embeddedice_set_reg_w_exec,
+};
-reg_cache_t* embeddedice_build_reg_cache(target_t *target, arm7_9_common_t *arm7_9)
+/**
+ * Probe EmbeddedICE module and set up local records of its registers.
+ * Different versions of the modules have different capabilities, such as
+ * hardware support for vector_catch, single stepping, and monitor mode.
+ */
+struct reg_cache *
+embeddedice_build_reg_cache(struct target *target, struct arm7_9_common *arm7_9)
{
int retval;
- reg_cache_t *reg_cache = malloc(sizeof(reg_cache_t));
- reg_t *reg_list = NULL;
- embeddedice_reg_t *arch_info = NULL;
- arm_jtag_t *jtag_info = &arm7_9->jtag_info;
+ struct reg_cache *reg_cache = malloc(sizeof(struct reg_cache));
+ struct reg *reg_list = NULL;
+ struct embeddedice_reg *arch_info = NULL;
+ struct arm_jtag *jtag_info = &arm7_9->jtag_info;
int num_regs = ARRAY_SIZE(eice_regs);
int i;
int eice_version = 0;
- /* register a register arch-type for EmbeddedICE registers only once */
- if (embeddedice_reg_arch_type == -1)
- embeddedice_reg_arch_type = register_reg_arch_type(
- embeddedice_get_reg, embeddedice_set_reg_w_exec);
-
/* vector_catch isn't always present */
if (!arm7_9->has_vector_catch)
num_regs--;
/* the actual registers are kept in two arrays */
- reg_list = calloc(num_regs, sizeof(reg_t));
- arch_info = calloc(num_regs, sizeof(embeddedice_reg_t));
+ reg_list = calloc(num_regs, sizeof(struct reg));
+ arch_info = calloc(num_regs, sizeof(struct embeddedice_reg));
/* fill in values for the reg cache */
reg_cache->name = "EmbeddedICE registers";
reg_cache->reg_list = reg_list;
reg_cache->num_regs = num_regs;
+ /* FIXME the second watchpoint unit on Feroceon and Dragonite
+ * seems not to work ... we should have a way to not set up
+ * its four registers here!
+ */
+
/* set up registers */
for (i = 0; i < num_regs; i++)
{
reg_list[i].size = eice_regs[i].width;
reg_list[i].dirty = 0;
reg_list[i].valid = 0;
- reg_list[i].bitfield_desc = NULL;
- reg_list[i].num_bitfields = 0;
reg_list[i].value = calloc(1, 4);
reg_list[i].arch_info = &arch_info[i];
- reg_list[i].arch_type = embeddedice_reg_arch_type;
+ reg_list[i].type = &eice_reg_type;
arch_info[i].addr = eice_regs[i].addr;
arch_info[i].jtag_info = jtag_info;
}
* in some unusual bits. Let feroceon.c validate it
* and do the appropriate setup itself.
*/
- if (strcmp(target_get_name(target), "feroceon") == 0 ||
- strcmp(target_get_name(target), "dragonite") == 0)
+ if (strcmp(target_type_name(target), "feroceon") == 0 ||
+ strcmp(target_type_name(target), "dragonite") == 0)
break;
- LOG_ERROR("unknown EmbeddedICE version (comms ctrl: 0x%8.8" PRIx32 ")", buf_get_u32(reg_list[EICE_COMMS_CTRL].value, 0, 32));
+ LOG_ERROR("unknown EmbeddedICE version "
+ "(comms ctrl: 0x%8.8" PRIx32 ")",
+ buf_get_u32(reg_list[EICE_COMMS_CTRL].value, 0, 32));
}
+ /* On Feroceon and Dragonite the second unit is seemingly missing. */
+ LOG_INFO("%s: hardware has %d breakpoint/watchpoint unit%s",
+ target_name(target), arm7_9->wp_available_max,
+ (arm7_9->wp_available_max != 1) ? "s" : "");
+
return reg_cache;
}
-int embeddedice_setup(target_t *target)
+/**
+ * Initialize EmbeddedICE module, if needed.
+ */
+int embeddedice_setup(struct target *target)
{
int retval;
- armv4_5_common_t *armv4_5 = target->arch_info;
- arm7_9_common_t *arm7_9 = armv4_5->arch_info;
+ struct arm7_9_common *arm7_9 = target_to_arm7_9(target);
- /* explicitly disable monitor mode */
+ /* Explicitly disable monitor mode. For now we only support halting
+ * debug ... we don't know how to talk with a resident debug monitor
+ * that manages break requests. ARM's "Angel Debug Monitor" is one
+ * common example of such code.
+ */
if (arm7_9->has_monitor_mode)
{
- reg_t *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
+ struct reg *dbg_ctrl = &arm7_9->eice_cache->reg_list[EICE_DBG_CTRL];
embeddedice_read_reg(dbg_ctrl);
if ((retval = jtag_execute_queue()) != ERROR_OK)
return jtag_execute_queue();
}
-static int embeddedice_get_reg(reg_t *reg)
-{
- int retval;
- if ((retval = embeddedice_read_reg(reg)) != ERROR_OK)
- {
- LOG_ERROR("BUG: error scheduling EmbeddedICE register read");
- return retval;
- }
-
- if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
- LOG_ERROR("register read failed");
- return retval;
- }
-
- return ERROR_OK;
-}
-
-int embeddedice_read_reg_w_check(reg_t *reg, uint8_t* check_value, uint8_t* check_mask)
+/**
+ * Queue a read for an EmbeddedICE register into the register cache,
+ * optionally checking the value read.
+ * Note that at this level, all registers are 32 bits wide.
+ */
+int embeddedice_read_reg_w_check(struct reg *reg,
+ uint8_t *check_value, uint8_t *check_mask)
{
- embeddedice_reg_t *ice_reg = reg->arch_info;
+ struct embeddedice_reg *ice_reg = reg->arch_info;
uint8_t reg_addr = ice_reg->addr & 0x1f;
- scan_field_t fields[3];
+ struct scan_field fields[3];
uint8_t field1_out[1];
uint8_t field2_out[1];
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_scann(ice_reg->jtag_info, 0x2);
+ arm_jtag_scann(ice_reg->jtag_info, 0x2, TAP_IDLE);
- arm_jtag_set_instr(ice_reg->jtag_info, ice_reg->jtag_info->intest_instr, NULL);
+ arm_jtag_set_instr(ice_reg->jtag_info, ice_reg->jtag_info->intest_instr, NULL, TAP_IDLE);
- fields[0].tap = ice_reg->jtag_info->tap;
+ /* bits 31:0 -- data (ignored here) */
fields[0].num_bits = 32;
fields[0].out_value = reg->value;
fields[0].in_value = NULL;
fields[0].check_value = NULL;
fields[0].check_mask = NULL;
- fields[1].tap = ice_reg->jtag_info->tap;
+ /* bits 36:32 -- register */
fields[1].num_bits = 5;
fields[1].out_value = field1_out;
- buf_set_u32(fields[1].out_value, 0, 5, reg_addr);
+ field1_out[0] = reg_addr;
fields[1].in_value = NULL;
fields[1].check_value = NULL;
fields[1].check_mask = NULL;
- fields[2].tap = ice_reg->jtag_info->tap;
+ /* bit 37 -- 0/read */
fields[2].num_bits = 1;
fields[2].out_value = field2_out;
- buf_set_u32(fields[2].out_value, 0, 1, 0);
+ field2_out[0] = 0;
fields[2].in_value = NULL;
fields[2].check_value = NULL;
fields[2].check_mask = NULL;
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ /* traverse Update-DR, setting address for the next read */
+ jtag_add_dr_scan(ice_reg->jtag_info->tap, 3, fields, TAP_IDLE);
+ /* bits 31:0 -- the data we're reading (and maybe checking) */
fields[0].in_value = reg->value;
fields[0].check_value = check_value;
fields[0].check_mask = check_mask;
* EICE_COMMS_DATA would read the register twice
* reading the control register is safe
*/
- buf_set_u32(fields[1].out_value, 0, 5, eice_regs[EICE_COMMS_CTRL].addr);
+ field1_out[0] = eice_regs[EICE_COMMS_CTRL].addr;
- jtag_add_dr_scan_check(3, fields, jtag_get_end_state());
+ /* traverse Update-DR, reading but with no other side effects */
+ jtag_add_dr_scan_check(ice_reg->jtag_info->tap, 3, fields, TAP_IDLE);
return ERROR_OK;
}
-/* receive <size> words of 32 bit from the DCC
- * we pretend the target is always going to be fast enough
- * (relative to the JTAG clock), so we don't need to handshake
+/**
+ * Receive a block of size 32-bit words from the DCC.
+ * We assume the target is always going to be fast enough (relative to
+ * the JTAG clock) that the debugger won't need to poll the handshake
+ * bit. The JTAG clock is usually at least six times slower than the
+ * functional clock, so the 50+ JTAG clocks needed to receive the word
+ * allow hundreds of instruction cycles (per word) in the target.
*/
-int embeddedice_receive(arm_jtag_t *jtag_info, uint32_t *data, uint32_t size)
+int embeddedice_receive(struct arm_jtag *jtag_info, uint32_t *data, uint32_t size)
{
- scan_field_t fields[3];
+ struct scan_field fields[3];
uint8_t field1_out[1];
uint8_t field2_out[1];
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_scann(jtag_info, 0x2);
- arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL);
+ arm_jtag_scann(jtag_info, 0x2, TAP_IDLE);
+ arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL, TAP_IDLE);
- fields[0].tap = jtag_info->tap;
fields[0].num_bits = 32;
fields[0].out_value = NULL;
fields[0].in_value = NULL;
- fields[1].tap = jtag_info->tap;
fields[1].num_bits = 5;
fields[1].out_value = field1_out;
- buf_set_u32(fields[1].out_value, 0, 5, eice_regs[EICE_COMMS_DATA].addr);
+ field1_out[0] = eice_regs[EICE_COMMS_DATA].addr;
fields[1].in_value = NULL;
- fields[2].tap = jtag_info->tap;
fields[2].num_bits = 1;
fields[2].out_value = field2_out;
- buf_set_u32(fields[2].out_value, 0, 1, 0);
+ field2_out[0] = 0;
fields[2].in_value = NULL;
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
while (size > 0)
{
* to avoid reading additional data from the DCC data reg
*/
if (size == 1)
- buf_set_u32(fields[1].out_value, 0, 5,
- eice_regs[EICE_COMMS_CTRL].addr);
+ field1_out[0] = eice_regs[EICE_COMMS_CTRL].addr;
fields[0].in_value = (uint8_t *)data;
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
jtag_add_callback(arm_le_to_h_u32, (jtag_callback_data_t)data);
data++;
return jtag_execute_queue();
}
-int embeddedice_read_reg(reg_t *reg)
+/**
+ * Queue a read for an EmbeddedICE register into the register cache,
+ * not checking the value read.
+ */
+int embeddedice_read_reg(struct reg *reg)
{
return embeddedice_read_reg_w_check(reg, NULL, NULL);
}
-void embeddedice_set_reg(reg_t *reg, uint32_t value)
+/**
+ * Queue a write for an EmbeddedICE register, updating the register cache.
+ * Uses embeddedice_write_reg().
+ */
+void embeddedice_set_reg(struct reg *reg, uint32_t value)
{
embeddedice_write_reg(reg, value);
}
-int embeddedice_set_reg_w_exec(reg_t *reg, uint8_t *buf)
+/**
+ * Write an EmbeddedICE register, updating the register cache.
+ * Uses embeddedice_set_reg(); not queued.
+ */
+int embeddedice_set_reg_w_exec(struct reg *reg, uint8_t *buf)
{
int retval;
- embeddedice_set_reg(reg, buf_get_u32(buf, 0, reg->size));
+ embeddedice_set_reg(reg, buf_get_u32(buf, 0, reg->size));
if ((retval = jtag_execute_queue()) != ERROR_OK)
- {
LOG_ERROR("register write failed");
- return retval;
- }
- return ERROR_OK;
+ return retval;
}
-void embeddedice_write_reg(reg_t *reg, uint32_t value)
+/**
+ * Queue a write for an EmbeddedICE register, bypassing the register cache.
+ */
+void embeddedice_write_reg(struct reg *reg, uint32_t value)
{
- embeddedice_reg_t *ice_reg = reg->arch_info;
+ struct embeddedice_reg *ice_reg = reg->arch_info;
LOG_DEBUG("%i: 0x%8.8" PRIx32 "", ice_reg->addr, value);
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_scann(ice_reg->jtag_info, 0x2);
+ arm_jtag_scann(ice_reg->jtag_info, 0x2, TAP_IDLE);
- arm_jtag_set_instr(ice_reg->jtag_info, ice_reg->jtag_info->intest_instr, NULL);
+ arm_jtag_set_instr(ice_reg->jtag_info, ice_reg->jtag_info->intest_instr, NULL, TAP_IDLE);
uint8_t reg_addr = ice_reg->addr & 0x1f;
embeddedice_write_reg_inner(ice_reg->jtag_info->tap, reg_addr, value);
-
}
-void embeddedice_store_reg(reg_t *reg)
+/**
+ * Queue a write for an EmbeddedICE register, using cached value.
+ * Uses embeddedice_write_reg().
+ */
+void embeddedice_store_reg(struct reg *reg)
{
embeddedice_write_reg(reg, buf_get_u32(reg->value, 0, reg->size));
}
-/* send <size> words of 32 bit to the DCC
- * we pretend the target is always going to be fast enough
- * (relative to the JTAG clock), so we don't need to handshake
+/**
+ * Send a block of size 32-bit words to the DCC.
+ * We assume the target is always going to be fast enough (relative to
+ * the JTAG clock) that the debugger won't need to poll the handshake
+ * bit. The JTAG clock is usually at least six times slower than the
+ * functional clock, so the 50+ JTAG clocks needed to receive the word
+ * allow hundreds of instruction cycles (per word) in the target.
*/
-int embeddedice_send(arm_jtag_t *jtag_info, uint32_t *data, uint32_t size)
+int embeddedice_send(struct arm_jtag *jtag_info, uint32_t *data, uint32_t size)
{
- scan_field_t fields[3];
+ struct scan_field fields[3];
uint8_t field0_out[4];
uint8_t field1_out[1];
uint8_t field2_out[1];
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_scann(jtag_info, 0x2);
- arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL);
+ arm_jtag_scann(jtag_info, 0x2, TAP_IDLE);
+ arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL, TAP_IDLE);
- fields[0].tap = jtag_info->tap;
fields[0].num_bits = 32;
fields[0].out_value = field0_out;
fields[0].in_value = NULL;
- fields[1].tap = jtag_info->tap;
fields[1].num_bits = 5;
fields[1].out_value = field1_out;
- buf_set_u32(fields[1].out_value, 0, 5, eice_regs[EICE_COMMS_DATA].addr);
+ field1_out[0] = eice_regs[EICE_COMMS_DATA].addr;
fields[1].in_value = NULL;
- fields[2].tap = jtag_info->tap;
fields[2].num_bits = 1;
fields[2].out_value = field2_out;
- buf_set_u32(fields[2].out_value, 0, 1, 1);
+ field2_out[0] = 1;
fields[2].in_value = NULL;
while (size > 0)
{
- buf_set_u32(fields[0].out_value, 0, 32, *data);
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ buf_set_u32(field0_out, 0, 32, *data);
+ jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
data++;
size--;
return ERROR_OK;
}
-/* wait for DCC control register R/W handshake bit to become active
+/**
+ * Poll DCC control register until read or write handshake completes.
*/
-int embeddedice_handshake(arm_jtag_t *jtag_info, int hsbit, uint32_t timeout)
+int embeddedice_handshake(struct arm_jtag *jtag_info, int hsbit, uint32_t timeout)
{
- scan_field_t fields[3];
+ struct scan_field fields[3];
uint8_t field0_in[4];
uint8_t field1_out[1];
uint8_t field2_out[1];
else
return ERROR_INVALID_ARGUMENTS;
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_scann(jtag_info, 0x2);
- arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL);
+ arm_jtag_scann(jtag_info, 0x2, TAP_IDLE);
+ arm_jtag_set_instr(jtag_info, jtag_info->intest_instr, NULL, TAP_IDLE);
- fields[0].tap = jtag_info->tap;
fields[0].num_bits = 32;
fields[0].out_value = NULL;
fields[0].in_value = field0_in;
- fields[1].tap = jtag_info->tap;
fields[1].num_bits = 5;
fields[1].out_value = field1_out;
- buf_set_u32(fields[1].out_value, 0, 5, eice_regs[EICE_COMMS_DATA].addr);
+ field1_out[0] = eice_regs[EICE_COMMS_DATA].addr;
fields[1].in_value = NULL;
- fields[2].tap = jtag_info->tap;
fields[2].num_bits = 1;
fields[2].out_value = field2_out;
- buf_set_u32(fields[2].out_value, 0, 1, 0);
+ field2_out[0] = 0;
fields[2].in_value = NULL;
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
gettimeofday(&lap, NULL);
- do
- {
- jtag_add_dr_scan(3, fields, jtag_get_end_state());
+ do {
+ jtag_add_dr_scan(jtag_info->tap, 3, fields, TAP_IDLE);
if ((retval = jtag_execute_queue()) != ERROR_OK)
return retval;
return ERROR_OK;
gettimeofday(&now, NULL);
- }
- while ((uint32_t)((now.tv_sec-lap.tv_sec)*1000 + (now.tv_usec-lap.tv_usec)/1000) <= timeout);
+ } while ((uint32_t)((now.tv_sec - lap.tv_sec) * 1000
+ + (now.tv_usec - lap.tv_usec) / 1000) <= timeout);
return ERROR_TARGET_TIMEOUT;
}
#ifndef HAVE_JTAG_MINIDRIVER_H
-/* this is the inner loop of the open loop DCC write of data to target */
-void embeddedice_write_dcc(jtag_tap_t *tap, int reg_addr, uint8_t *buffer, int little, int count)
+/**
+ * This is an inner loop of the open loop DCC write of data to target
+ */
+void embeddedice_write_dcc(struct jtag_tap *tap,
+ int reg_addr, uint8_t *buffer, int little, int count)
{
int i;
+
for (i = 0; i < count; i++)
{
- embeddedice_write_reg_inner(tap, reg_addr, fast_target_buffer_get_u32(buffer, little));
+ embeddedice_write_reg_inner(tap, reg_addr,
+ fast_target_buffer_get_u32(buffer, little));
buffer += 4;
}
}