reg_cache->next = etb_build_reg_cache(etb);
etb->reg_cache = reg_cache->next;
-
- if (etm_ctx->capture_driver->init(etm_ctx) != ERROR_OK)
- {
- ERROR("ETM capture driver initialization failed");
- exit(-1);
- }
+ }
+
+ if (etm_ctx->capture_driver->init(etm_ctx) != ERROR_OK)
+ {
+ ERROR("ETM capture driver initialization failed");
+ exit(-1);
}
return reg_cache;
*
*/
extern etm_capture_driver_t etb_capture_driver;
+extern etm_capture_driver_t etm_dummy_capture_driver;
+#if BUILD_OOCD_TRACE == 1
+extern etm_capture_driver_t oocd_trace_capture_driver;
+#endif
etm_capture_driver_t *etm_capture_drivers[] =
{
&etb_capture_driver,
+ &etm_dummy_capture_driver,
+#if BUILD_OOCD_TRACE == 1
+ &oocd_trace_capture_driver,
+#endif
NULL
};
u32 next_pc = ctx->current_pc;
u32 old_data_index = ctx->data_index;
u32 old_data_half = ctx->data_half;
+ u32 old_index = ctx->pipe_index;
+ u32 last_instruction = ctx->last_instruction;
+ u32 cycles = 0;
+ int current_pc_ok = ctx->pc_ok;
if (ctx->trace_data[ctx->pipe_index].flags & ETMV1_TRIGGER_CYCLE)
{
command_print(cmd_ctx, "--- trigger ---");
}
+
+ /* instructions execute in IE/D or BE/D cycles */
+ if ((pipestat == STAT_IE) || (pipestat == STAT_ID))
+ ctx->last_instruction = ctx->pipe_index;
/* if we don't have a valid pc skip until we reach an indirect branch */
if ((!ctx->pc_ok) && (pipestat != STAT_BE))
*/
old_data_index = ctx->data_index;
old_data_half = ctx->data_half;
+
+ ctx->last_instruction = ctx->pipe_index;
if ((retval = etmv1_branch_address(ctx)) != 0)
{
break;
case 0x4: /* periodic synchronization point */
next_pc = ctx->last_branch;
+ /* if we had no valid PC prior to this synchronization point,
+ * we have to move on with the next trace cycle
+ */
+ if (!current_pc_ok)
+ {
+ command_print(cmd_ctx, "--- periodic synchronization point at 0x%8.8x ---", next_pc);
+ ctx->current_pc = next_pc;
+ ctx->pipe_index++;
+ continue;
+ }
break;
default: /* reserved */
ERROR("BUG: branch reason code 0x%x is reserved", ctx->last_branch_reason);
}
else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE)
{
- /* TODO: handle incomplete images */
+ /* TODO: handle incomplete images
+ * for now we just quit the analsysis*/
+ return retval;
}
}
+
+ cycles = old_index - last_instruction;
}
if ((pipestat == STAT_ID) || (pipestat == STAT_BD))
do {
if ((retval = etmv1_next_packet(ctx, &packet, 0)) != 0)
- return -1;
+ return ERROR_ETM_ANALYSIS_FAILED;
ctx->last_ptr &= ~(0x7f << shift);
ctx->last_ptr |= (packet & 0x7f) << shift;
shift += 7;
{
u32 data;
if (etmv1_data(ctx, 4, &data) != 0)
- return -1;
+ return ERROR_ETM_ANALYSIS_FAILED;
command_print(cmd_ctx, "data: 0x%8.8x", data);
}
}
{
u32 data;
if (etmv1_data(ctx, arm_access_size(&instruction), &data) != 0)
- return -1;
+ return ERROR_ETM_ANALYSIS_FAILED;
command_print(cmd_ctx, "data: 0x%8.8x", data);
}
}
if ((pipestat != STAT_TD) && (pipestat != STAT_WT))
{
- command_print(cmd_ctx, "%s%s",
- instruction.text, (pipestat == STAT_IN) ? " (not executed)" : "");
+ char cycles_text[32] = "";
+
+ /* if the trace was captured with cycle accurate tracing enabled,
+ * output the number of cycles since the last executed instruction
+ */
+ if (ctx->tracemode & ETMV1_CYCLE_ACCURATE)
+ {
+ snprintf(cycles_text, 32, " (%i %s)",
+ cycles,
+ (cycles == 1) ? "cycle" : "cycles");
+ }
+
+ command_print(cmd_ctx, "%s%s%s",
+ instruction.text,
+ (pipestat == STAT_IN) ? " (not executed)" : "",
+ cycles_text);
ctx->current_pc = next_pc;
tracemode = arm7_9->etm_ctx->tracemode;
- if (argc == 3)
+ if (argc == 4)
{
if (strcmp(args[0], "none") == 0)
{
command_print(cmd_ctx, "invalid option '%s'", args[2]);
return ERROR_OK;
}
+
+ if (strcmp(args[3], "enable") == 0)
+ {
+ tracemode |= ETMV1_BRANCH_OUTPUT;
+ }
+ else if (strcmp(args[3], "disable") == 0)
+ {
+ tracemode |= 0;
+ }
+ else
+ {
+ command_print(cmd_ctx, "invalid option '%s'", args[2]);
+ return ERROR_OK;
+ }
}
else if (argc != 0)
{
- command_print(cmd_ctx, "usage: configure trace mode <none|data|address|all> <context id bits> <enable|disable cycle accurate>");
+ command_print(cmd_ctx, "usage: configure trace mode <none|data|address|all> <context id bits> <cycle accurate> <branch output>");
return ERROR_OK;
}
{
command_print(cmd_ctx, "cycle-accurate tracing disabled");
}
+
+ if (tracemode & ETMV1_BRANCH_OUTPUT)
+ {
+ command_print(cmd_ctx, "full branch address output enabled");
+ }
+ else
+ {
+ command_print(cmd_ctx, "full branch address output disabled");
+ }
/* only update ETM_CTRL register if tracemode changed */
if (arm7_9->etm_ctx->tracemode != tracemode)
buf_set_u32(etm_ctrl_reg->value, 2, 2, tracemode & ETMV1_TRACE_MASK);
buf_set_u32(etm_ctrl_reg->value, 14, 2, (tracemode & ETMV1_CONTEXTID_MASK) >> 4);
buf_set_u32(etm_ctrl_reg->value, 12, 1, (tracemode & ETMV1_CYCLE_ACCURATE) >> 8);
-
+ buf_set_u32(etm_ctrl_reg->value, 8, 1, (tracemode & ETMV1_BRANCH_OUTPUT) >> 9);
etm_store_reg(etm_ctrl_reg);
arm7_9->etm_ctx->tracemode = tracemode;
}
}
+ if (!etm_capture_drivers[i])
+ {
+ /* no supported capture driver found, don't register an ETM */
+ free(etm_ctx);
+ ERROR("trace capture driver '%s' not found", args[4]);
+ return ERROR_OK;
+ }
+
etm_ctx->target = target;
+ etm_ctx->trigger_percent = 50;
etm_ctx->trace_data = NULL;
etm_ctx->trace_depth = 0;
etm_ctx->portmode = portmode;
etm_ctx->last_ptr = 0x0;
etm_ctx->ptr_ok = 0x0;
etm_ctx->context_id = 0x0;
+ etm_ctx->last_instruction = 0;
arm7_9->etm_ctx = etm_ctx;
return ERROR_OK;
}
+int handle_etm_info_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ target_t *target;
+ armv4_5_common_t *armv4_5;
+ arm7_9_common_t *arm7_9;
+ reg_t *etm_config_reg;
+ reg_t *etm_sys_config_reg;
+
+ int max_port_size;
+
+ target = get_current_target(cmd_ctx);
+
+ if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
+ return ERROR_OK;
+ }
+
+ if (!arm7_9->etm_ctx)
+ {
+ command_print(cmd_ctx, "current target doesn't have an ETM configured");
+ return ERROR_OK;
+ }
+
+ etm_config_reg = &arm7_9->etm_ctx->reg_cache->reg_list[ETM_CONFIG];
+ etm_sys_config_reg = &arm7_9->etm_ctx->reg_cache->reg_list[ETM_SYS_CONFIG];
+
+ etm_get_reg(etm_config_reg);
+ command_print(cmd_ctx, "pairs of address comparators: %i", buf_get_u32(etm_config_reg->value, 0, 4));
+ command_print(cmd_ctx, "pairs of data comparators: %i", buf_get_u32(etm_config_reg->value, 4, 4));
+ command_print(cmd_ctx, "memory map decoders: %i", buf_get_u32(etm_config_reg->value, 8, 5));
+ command_print(cmd_ctx, "number of counters: %i", buf_get_u32(etm_config_reg->value, 13, 3));
+ command_print(cmd_ctx, "sequencer %spresent",
+ (buf_get_u32(etm_config_reg->value, 16, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "number of ext. inputs: %i", buf_get_u32(etm_config_reg->value, 17, 3));
+ command_print(cmd_ctx, "number of ext. outputs: %i", buf_get_u32(etm_config_reg->value, 20, 3));
+ command_print(cmd_ctx, "FIFO full %spresent",
+ (buf_get_u32(etm_config_reg->value, 23, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "protocol version: %i", buf_get_u32(etm_config_reg->value, 28, 3));
+
+ etm_get_reg(etm_sys_config_reg);
+
+ switch (buf_get_u32(etm_sys_config_reg->value, 0, 3))
+ {
+ case 0:
+ max_port_size = 4;
+ break;
+ case 1:
+ max_port_size = 8;
+ break;
+ case 2:
+ max_port_size = 16;
+ break;
+ }
+ command_print(cmd_ctx, "max. port size: %i", max_port_size);
+
+ command_print(cmd_ctx, "half-rate clocking %ssupported",
+ (buf_get_u32(etm_sys_config_reg->value, 3, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "full-rate clocking %ssupported",
+ (buf_get_u32(etm_sys_config_reg->value, 4, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "normal trace format %ssupported",
+ (buf_get_u32(etm_sys_config_reg->value, 5, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "multiplex trace format %ssupported",
+ (buf_get_u32(etm_sys_config_reg->value, 6, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "demultiplex trace format %ssupported",
+ (buf_get_u32(etm_sys_config_reg->value, 7, 1) == 1) ? "" : "not ");
+ command_print(cmd_ctx, "FIFO full %ssupported",
+ (buf_get_u32(etm_sys_config_reg->value, 8, 1) == 1) ? "" : "not ");
+
+ return ERROR_OK;
+}
+
int handle_etm_status_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
target_t *target;
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
etm_context_t *etm_ctx;
- int i;
if (argc < 1)
{
- command_print(cmd_ctx, "usage: etm image <file> ['bin'|'ihex'|'elf'] [base address]");
+ command_print(cmd_ctx, "usage: etm image <file> [base address] [type]");
return ERROR_OK;
}
etm_ctx->image->base_address_set = 0;
etm_ctx->image->start_address_set = 0;
- for (i = 1; i < argc; i++)
+ /* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
+ if (argc >= 2)
{
- /* optional argument could be image type */
- if (identify_image_type(&etm_ctx->image->type, args[i], args[0]) == ERROR_IMAGE_TYPE_UNKNOWN)
- {
- /* if it wasn't a valid image type, treat it as the base address */
- etm_ctx->image->base_address_set = 1;
- etm_ctx->image->base_address = strtoul(args[i], NULL, 0);
- }
+ etm_ctx->image->base_address_set = 1;
+ etm_ctx->image->base_address = strtoul(args[1], NULL, 0);
}
-
- if (image_open(etm_ctx->image, args[0], FILEIO_READ) != ERROR_OK)
+ else
+ {
+ etm_ctx->image->base_address_set = 0;
+ }
+
+ if (image_open(etm_ctx->image, args[0], (argc >= 3) ? args[2] : NULL) != ERROR_OK)
{
command_print(cmd_ctx, "image opening error: %s", etm_ctx->image->error_str);
free(etm_ctx->image);
for (i = 0; i < etm_ctx->trace_depth; i++)
{
- fileio_read_u32(&file, &etm_ctx->trace_data[i].pipestat);
- fileio_read_u32(&file, &etm_ctx->trace_data[i].packet);
- fileio_read_u32(&file, &etm_ctx->trace_data[i].flags);
+ u32 pipestat, packet, flags;
+ fileio_read_u32(&file, &pipestat);
+ fileio_read_u32(&file, &packet);
+ fileio_read_u32(&file, &flags);
+ etm_ctx->trace_data[i].pipestat = pipestat & 0xff;
+ etm_ctx->trace_data[i].packet = packet & 0xffff;
+ etm_ctx->trace_data[i].flags = flags;
}
fileio_close(&file);
return ERROR_OK;
}
+int handle_etm_trigger_percent_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ target_t *target;
+ armv4_5_common_t *armv4_5;
+ arm7_9_common_t *arm7_9;
+ etm_context_t *etm_ctx;
+
+ target = get_current_target(cmd_ctx);
+
+ if (arm7_9_get_arch_pointers(target, &armv4_5, &arm7_9) != ERROR_OK)
+ {
+ command_print(cmd_ctx, "current target isn't an ARM7/ARM9 target");
+ return ERROR_OK;
+ }
+
+ if (!(etm_ctx = arm7_9->etm_ctx))
+ {
+ command_print(cmd_ctx, "current target doesn't have an ETM configured");
+ return ERROR_OK;
+ }
+
+ if (argc > 0)
+ {
+ u32 new_value = strtoul(args[0], NULL, 0);
+
+ if ((new_value < 2) || (new_value > 100))
+ {
+ command_print(cmd_ctx, "valid settings are 2% to 100%");
+ }
+ else
+ {
+ etm_ctx->trigger_percent = new_value;
+ }
+ }
+
+ command_print(cmd_ctx, "%i percent of the tracebuffer reserved for after the trigger", etm_ctx->trigger_percent);
+
+ return ERROR_OK;
+}
+
int handle_etm_start_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
target_t *target;
armv4_5_common_t *armv4_5;
arm7_9_common_t *arm7_9;
etm_context_t *etm_ctx;
+ int retval;
target = get_current_target(cmd_ctx);
return ERROR_OK;
}
- etmv1_analyze_trace(etm_ctx, cmd_ctx);
+ if ((retval = etmv1_analyze_trace(etm_ctx, cmd_ctx)) != ERROR_OK)
+ {
+ switch(retval)
+ {
+ case ERROR_ETM_ANALYSIS_FAILED:
+ command_print(cmd_ctx, "further analysis failed (corrupted trace data or just end of data");
+ break;
+ case ERROR_TRACE_INSTRUCTION_UNAVAILABLE:
+ command_print(cmd_ctx, "no instruction for current address available, analysis aborted");
+ break;
+ case ERROR_TRACE_IMAGE_UNAVAILABLE:
+ command_print(cmd_ctx, "no image available for trace analysis");
+ break;
+ default:
+ command_print(cmd_ctx, "unknown error: %i", retval);
+ }
+ }
return ERROR_OK;
}
int etm_register_user_commands(struct command_context_s *cmd_ctx)
{
register_command(cmd_ctx, etm_cmd, "tracemode", handle_etm_tracemode_command,
- COMMAND_EXEC, "configure trace mode <none|data|address|all> <context id bits> <enable|disable cycle accurate>");
+ COMMAND_EXEC, "configure trace mode <none|data|address|all> <context id bits> <cycle accurate> <branch output");
+
+ register_command(cmd_ctx, etm_cmd, "info", handle_etm_info_command,
+ COMMAND_EXEC, "display info about the current target's ETM");
+ register_command(cmd_ctx, etm_cmd, "trigger_percent <percent>", handle_etm_trigger_percent_command,
+ COMMAND_EXEC, "amount (<percent>) of trace buffer to be filled after the trigger occured");
register_command(cmd_ctx, etm_cmd, "status", handle_etm_status_command,
COMMAND_EXEC, "display current target's ETM status");
register_command(cmd_ctx, etm_cmd, "start", handle_etm_start_command,