#include "config.h"
#endif
+#include "arm.h"
#include "etm.h"
+#include "etb.h"
+#include "image.h"
+#include "arm_disassembler.h"
+#include "register.h"
+#include "etm_dummy.h"
-#include "armv4_5.h"
-#include "arm7_9_common.h"
+#if BUILD_OOCD_TRACE == 1
+#include "oocd_trace.h"
+#endif
-#include "log.h"
-#include "arm_jtag.h"
-#include "types.h"
-#include "binarybuffer.h"
-#include "target.h"
-#include "register.h"
-#include "jtag.h"
-#include <stdlib.h>
+/*
+ * ARM "Embedded Trace Macrocell" (ETM) support -- direct JTAG access.
+ *
+ * ETM modules collect instruction and/or data trace information, compress
+ * it, and transfer it to a debugging host through either a (buffered) trace
+ * port (often a 38-pin Mictor connector) or an Embedded Trace Buffer (ETB).
+ *
+ * There are several generations of these modules. Original versions have
+ * JTAG access through a dedicated scan chain. Recent versions have added
+ * access via coprocessor instructions, memory addressing, and the ARM Debug
+ * Interface v5 (ADIv5); and phased out direct JTAG access.
+ *
+ * This code supports up to the ETMv1.3 architecture, as seen in ETM9 and
+ * most common ARM9 systems. Note: "CoreSight ETM9" implements ETMv3.2,
+ * implying non-JTAG connectivity options.
+ *
+ * Relevant documentation includes:
+ * ARM DDI 0157G ... ETM9 (r2p2) Technical Reference Manual
+ * ARM DDI 0315B ... CoreSight ETM9 (r0p1) Technical Reference Manual
+ * ARM IHI 0014O ... Embedded Trace Macrocell, Architecture Specification
+ */
-bitfield_desc_t etm_comms_ctrl_bitfield_desc[] =
-{
- {"R", 1},
- {"W", 1},
- {"reserved", 26},
- {"version", 4}
+enum {
+ RO, /* read/only */
+ WO, /* write/only */
+ RW, /* read/write */
};
-int etm_reg_arch_info[] =
-{
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
- 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
- 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
- 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
- 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
- 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
- 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
- 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
- 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
- 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
- 0x58, 0x59, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
- 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x67,
- 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+struct etm_reg_info {
+ uint8_t addr;
+ uint8_t size; /* low-N of 32 bits */
+ uint8_t mode; /* RO, WO, RW */
+ uint8_t bcd_vers; /* 1.0, 2.0, etc */
+ char *name;
};
-int etm_reg_arch_size_info[] =
-{
- 32, 32, 17, 8, 3, 9, 32, 16,
- 17, 26, 25, 8, 17, 32, 32, 17,
- 32, 32, 32, 32, 32, 32, 32, 32,
- 32, 32, 32, 32, 32, 32, 32, 32,
- 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7,
- 32, 32, 32, 32, 32, 32, 32, 32,
- 32, 32, 32, 32, 32, 32, 32, 32,
- 32, 32, 32, 32, 32, 32, 32, 32,
- 32, 32, 32, 32, 32, 32, 32, 32,
- 16, 16, 16, 16, 18, 18, 18, 18,
- 17, 17, 17, 17, 16, 16, 16, 16,
- 17, 17, 17, 17, 17, 17, 2,
- 17, 17, 17, 17, 32, 32, 32, 32
+/*
+ * Registers 0..0x7f are JTAG-addressable using scanchain 6.
+ * (Or on some processors, through coprocessor operations.)
+ * Newer versions of ETM make some W/O registers R/W, and
+ * provide definitions for some previously-unused bits.
+ */
+
+/* core registers used to version/configure the ETM */
+static const struct etm_reg_info etm_core[] = {
+ /* NOTE: we "know" the order here ... */
+ { ETM_CONFIG, 32, RO, 0x10, "ETM_config", },
+ { ETM_ID, 32, RO, 0x20, "ETM_id", },
+};
+
+/* basic registers that are always there given the right ETM version */
+static const struct etm_reg_info etm_basic[] = {
+ /* ETM Trace Registers */
+ { ETM_CTRL, 32, RW, 0x10, "ETM_ctrl", },
+ { ETM_TRIG_EVENT, 17, WO, 0x10, "ETM_trig_event", },
+ { ETM_ASIC_CTRL, 8, WO, 0x10, "ETM_asic_ctrl", },
+ { ETM_STATUS, 3, RO, 0x11, "ETM_status", },
+ { ETM_SYS_CONFIG, 9, RO, 0x12, "ETM_sys_config", },
+
+ /* TraceEnable configuration */
+ { ETM_TRACE_RESOURCE_CTRL, 32, WO, 0x12, "ETM_trace_resource_ctrl", },
+ { ETM_TRACE_EN_CTRL2, 16, WO, 0x12, "ETM_trace_en_ctrl2", },
+ { ETM_TRACE_EN_EVENT, 17, WO, 0x10, "ETM_trace_en_event", },
+ { ETM_TRACE_EN_CTRL1, 26, WO, 0x10, "ETM_trace_en_ctrl1", },
+
+ /* ViewData configuration (data trace) */
+ { ETM_VIEWDATA_EVENT, 17, WO, 0x10, "ETM_viewdata_event", },
+ { ETM_VIEWDATA_CTRL1, 32, WO, 0x10, "ETM_viewdata_ctrl1", },
+ { ETM_VIEWDATA_CTRL2, 32, WO, 0x10, "ETM_viewdata_ctrl2", },
+ { ETM_VIEWDATA_CTRL3, 17, WO, 0x10, "ETM_viewdata_ctrl3", },
+
+ /* REVISIT exclude VIEWDATA_CTRL2 when it's not there */
+
+ { 0x78, 12, WO, 0x20, "ETM_sync_freq", },
+ { 0x7a, 22, RO, 0x31, "ETM_config_code_ext", },
+ { 0x7b, 32, WO, 0x31, "ETM_ext_input_select", },
+ { 0x7c, 32, WO, 0x34, "ETM_trace_start_stop", },
+ { 0x7d, 8, WO, 0x34, "ETM_behavior_control", },
+};
+
+static const struct etm_reg_info etm_fifofull[] = {
+ /* FIFOFULL configuration */
+ { ETM_FIFOFULL_REGION, 25, WO, 0x10, "ETM_fifofull_region", },
+ { ETM_FIFOFULL_LEVEL, 8, WO, 0x10, "ETM_fifofull_level", },
+};
+
+static const struct etm_reg_info etm_addr_comp[] = {
+ /* Address comparator register pairs */
+#define ADDR_COMPARATOR(i) \
+ { ETM_ADDR_COMPARATOR_VALUE + (i) - 1, 32, WO, 0x10, \
+ "ETM_addr_" #i "_comparator_value", }, \
+ { ETM_ADDR_ACCESS_TYPE + (i) - 1, 7, WO, 0x10, \
+ "ETM_addr_" #i "_access_type", }
+ ADDR_COMPARATOR(1),
+ ADDR_COMPARATOR(2),
+ ADDR_COMPARATOR(3),
+ ADDR_COMPARATOR(4),
+ ADDR_COMPARATOR(5),
+ ADDR_COMPARATOR(6),
+ ADDR_COMPARATOR(7),
+ ADDR_COMPARATOR(8),
+
+ ADDR_COMPARATOR(9),
+ ADDR_COMPARATOR(10),
+ ADDR_COMPARATOR(11),
+ ADDR_COMPARATOR(12),
+ ADDR_COMPARATOR(13),
+ ADDR_COMPARATOR(14),
+ ADDR_COMPARATOR(15),
+ ADDR_COMPARATOR(16),
+#undef ADDR_COMPARATOR
+};
+
+static const struct etm_reg_info etm_data_comp[] = {
+ /* Data Value Comparators (NOTE: odd addresses are reserved) */
+#define DATA_COMPARATOR(i) \
+ { ETM_DATA_COMPARATOR_VALUE + 2*(i) - 1, 32, WO, 0x10, \
+ "ETM_data_" #i "_comparator_value", }, \
+ { ETM_DATA_COMPARATOR_MASK + 2*(i) - 1, 32, WO, 0x10, \
+ "ETM_data_" #i "_comparator_mask", }
+ DATA_COMPARATOR(1),
+ DATA_COMPARATOR(2),
+ DATA_COMPARATOR(3),
+ DATA_COMPARATOR(4),
+ DATA_COMPARATOR(5),
+ DATA_COMPARATOR(6),
+ DATA_COMPARATOR(7),
+ DATA_COMPARATOR(8),
+#undef DATA_COMPARATOR
+};
+
+static const struct etm_reg_info etm_counters[] = {
+#define ETM_COUNTER(i) \
+ { ETM_COUNTER_RELOAD_VALUE + (i) - 1, 16, WO, 0x10, \
+ "ETM_counter_" #i "_reload_value", }, \
+ { ETM_COUNTER_ENABLE + (i) - 1, 18, WO, 0x10, \
+ "ETM_counter_" #i "_enable", }, \
+ { ETM_COUNTER_RELOAD_EVENT + (i) - 1, 17, WO, 0x10, \
+ "ETM_counter_" #i "_reload_event", }, \
+ { ETM_COUNTER_VALUE + (i) - 1, 16, RO, 0x10, \
+ "ETM_counter_" #i "_value", }
+ ETM_COUNTER(1),
+ ETM_COUNTER(2),
+ ETM_COUNTER(3),
+ ETM_COUNTER(4),
+#undef ETM_COUNTER
+};
+
+static const struct etm_reg_info etm_sequencer[] = {
+#define ETM_SEQ(i) \
+ { ETM_SEQUENCER_EVENT + (i), 17, WO, 0x10, \
+ "ETM_sequencer_event" #i, }
+ ETM_SEQ(0), /* 1->2 */
+ ETM_SEQ(1), /* 2->1 */
+ ETM_SEQ(2), /* 2->3 */
+ ETM_SEQ(3), /* 3->1 */
+ ETM_SEQ(4), /* 3->2 */
+ ETM_SEQ(5), /* 1->3 */
+#undef ETM_SEQ
+ /* 0x66 reserved */
+ { ETM_SEQUENCER_STATE, 2, RO, 0x10, "ETM_sequencer_state", },
+};
+
+static const struct etm_reg_info etm_outputs[] = {
+#define ETM_OUTPUT(i) \
+ { ETM_EXTERNAL_OUTPUT + (i) - 1, 17, WO, 0x10, \
+ "ETM_external_output" #i, }
+
+ ETM_OUTPUT(1),
+ ETM_OUTPUT(2),
+ ETM_OUTPUT(3),
+ ETM_OUTPUT(4),
+#undef ETM_OUTPUT
+};
+
+#if 0
+ /* registers from 0x6c..0x7f were added after ETMv1.3 */
+
+ /* Context ID Comparators */
+ { 0x6c, 32, RO, 0x20, "ETM_contextid_comparator_value1", }
+ { 0x6d, 32, RO, 0x20, "ETM_contextid_comparator_value2", }
+ { 0x6e, 32, RO, 0x20, "ETM_contextid_comparator_value3", }
+ { 0x6f, 32, RO, 0x20, "ETM_contextid_comparator_mask", }
+#endif
+
+static int etm_get_reg(struct reg *reg);
+static int etm_read_reg_w_check(struct reg *reg,
+ uint8_t* check_value, uint8_t* check_mask);
+static int etm_register_user_commands(struct command_context *cmd_ctx);
+static int etm_set_reg_w_exec(struct reg *reg, uint8_t *buf);
+static int etm_write_reg(struct reg *reg, uint32_t value);
+
+static const struct reg_arch_type etm_scan6_type = {
+ .get = etm_get_reg,
+ .set = etm_set_reg_w_exec,
};
-char* etm_reg_list[] =
+/* Look up register by ID ... most ETM instances only
+ * support a subset of the possible registers.
+ */
+static struct reg *etm_reg_lookup(struct etm_context *etm_ctx, unsigned id)
{
- "ETM_CTRL",
- "ETM_CONFIG",
- "ETM_TRIG_EVENT",
- "ETM_MMD_CTRL",
- "ETM_STATUS",
- "ETM_SYS_CONFIG",
- "ETM_TRACE_RESOURCE_CTRL",
- "ETM_TRACE_EN_CTRL2",
- "ETM_TRACE_EN_EVENT",
- "ETM_TRACE_EN_CTRL1",
- "ETM_FIFOFULL_REGION",
- "ETM_FIFOFULL_LEVEL",
- "ETM_VIEWDATA_EVENT",
- "ETM_VIEWDATA_CTRL1",
- "ETM_VIEWDATA_CTRL2",
- "ETM_VIEWDATA_CTRL3",
- "ETM_ADDR_COMPARATOR_VALUE1",
- "ETM_ADDR_COMPARATOR_VALUE2",
- "ETM_ADDR_COMPARATOR_VALUE3",
- "ETM_ADDR_COMPARATOR_VALUE4",
- "ETM_ADDR_COMPARATOR_VALUE5",
- "ETM_ADDR_COMPARATOR_VALUE6",
- "ETM_ADDR_COMPARATOR_VALUE7",
- "ETM_ADDR_COMPARATOR_VALUE8",
- "ETM_ADDR_COMPARATOR_VALUE9",
- "ETM_ADDR_COMPARATOR_VALUE10",
- "ETM_ADDR_COMPARATOR_VALUE11",
- "ETM_ADDR_COMPARATOR_VALUE12",
- "ETM_ADDR_COMPARATOR_VALUE13",
- "ETM_ADDR_COMPARATOR_VALUE14",
- "ETM_ADDR_COMPARATOR_VALUE15",
- "ETM_ADDR_COMPARATOR_VALUE16",
- "ETM_ADDR_ACCESS_TYPE1",
- "ETM_ADDR_ACCESS_TYPE2",
- "ETM_ADDR_ACCESS_TYPE3",
- "ETM_ADDR_ACCESS_TYPE4",
- "ETM_ADDR_ACCESS_TYPE5",
- "ETM_ADDR_ACCESS_TYPE6",
- "ETM_ADDR_ACCESS_TYPE7",
- "ETM_ADDR_ACCESS_TYPE8",
- "ETM_ADDR_ACCESS_TYPE9",
- "ETM_ADDR_ACCESS_TYPE10",
- "ETM_ADDR_ACCESS_TYPE11",
- "ETM_ADDR_ACCESS_TYPE12",
- "ETM_ADDR_ACCESS_TYPE13",
- "ETM_ADDR_ACCESS_TYPE14",
- "ETM_ADDR_ACCESS_TYPE15",
- "ETM_ADDR_ACCESS_TYPE16",
- "ETM_DATA_COMPARATOR_VALUE1",
- "ETM_DATA_COMPARATOR_VALUE2",
- "ETM_DATA_COMPARATOR_VALUE3",
- "ETM_DATA_COMPARATOR_VALUE4",
- "ETM_DATA_COMPARATOR_VALUE5",
- "ETM_DATA_COMPARATOR_VALUE6",
- "ETM_DATA_COMPARATOR_VALUE7",
- "ETM_DATA_COMPARATOR_VALUE8",
- "ETM_DATA_COMPARATOR_VALUE9",
- "ETM_DATA_COMPARATOR_VALUE10",
- "ETM_DATA_COMPARATOR_VALUE11",
- "ETM_DATA_COMPARATOR_VALUE12",
- "ETM_DATA_COMPARATOR_VALUE13",
- "ETM_DATA_COMPARATOR_VALUE14",
- "ETM_DATA_COMPARATOR_VALUE15",
- "ETM_DATA_COMPARATOR_VALUE16",
- "ETM_DATA_COMPARATOR_MASK1",
- "ETM_DATA_COMPARATOR_MASK2",
- "ETM_DATA_COMPARATOR_MASK3",
- "ETM_DATA_COMPARATOR_MASK4",
- "ETM_DATA_COMPARATOR_MASK5",
- "ETM_DATA_COMPARATOR_MASK6",
- "ETM_DATA_COMPARATOR_MASK7",
- "ETM_DATA_COMPARATOR_MASK8",
- "ETM_DATA_COMPARATOR_MASK9",
- "ETM_DATA_COMPARATOR_MASK10",
- "ETM_DATA_COMPARATOR_MASK11",
- "ETM_DATA_COMPARATOR_MASK12",
- "ETM_DATA_COMPARATOR_MASK13",
- "ETM_DATA_COMPARATOR_MASK14",
- "ETM_DATA_COMPARATOR_MASK15",
- "ETM_DATA_COMPARATOR_MASK16",
- "ETM_COUNTER_INITAL_VALUE1",
- "ETM_COUNTER_INITAL_VALUE2",
- "ETM_COUNTER_INITAL_VALUE3",
- "ETM_COUNTER_INITAL_VALUE4",
- "ETM_COUNTER_ENABLE1",
- "ETM_COUNTER_ENABLE2",
- "ETM_COUNTER_ENABLE3",
- "ETM_COUNTER_ENABLE4",
- "ETM_COUNTER_RELOAD_VALUE1",
- "ETM_COUNTER_RELOAD_VALUE2",
- "ETM_COUNTER_RELOAD_VALUE3",
- "ETM_COUNTER_RELOAD_VALUE4",
- "ETM_COUNTER_VALUE1",
- "ETM_COUNTER_VALUE2",
- "ETM_COUNTER_VALUE3",
- "ETM_COUNTER_VALUE4",
- "ETM_SEQUENCER_CTRL1",
- "ETM_SEQUENCER_CTRL2",
- "ETM_SEQUENCER_CTRL3",
- "ETM_SEQUENCER_CTRL4",
- "ETM_SEQUENCER_CTRL5",
- "ETM_SEQUENCER_CTRL6",
- "ETM_SEQUENCER_STATE",
- "ETM_EXTERNAL_OUTPUT1",
- "ETM_EXTERNAL_OUTPUT2",
- "ETM_EXTERNAL_OUTPUT3",
- "ETM_EXTERNAL_OUTPUT4",
- "ETM_CONTEXTID_COMPARATOR_VALUE1",
- "ETM_CONTEXTID_COMPARATOR_VALUE2",
- "ETM_CONTEXTID_COMPARATOR_VALUE3",
- "ETM_CONTEXTID_COMPARATOR_MASK"
-};
-
-int etm_reg_arch_type = -1;
-
-int etm_get_reg(reg_t *reg);
-int etm_set_reg(reg_t *reg, u32 value);
-int etm_set_reg_w_exec(reg_t *reg, u8 *buf);
-
-int etm_write_reg(reg_t *reg, u32 value);
-int etm_read_reg(reg_t *reg);
-
-reg_cache_t* etm_build_reg_cache(target_t *target, arm_jtag_t *jtag_info, int extra_reg)
+ struct reg_cache *cache = etm_ctx->reg_cache;
+ unsigned i;
+
+ for (i = 0; i < cache->num_regs; i++) {
+ struct etm_reg *reg = cache->reg_list[i].arch_info;
+
+ if (reg->reg_info->addr == id)
+ return &cache->reg_list[i];
+ }
+
+ /* caller asking for nonexistent register is a bug! */
+ /* REVISIT say which of the N targets was involved */
+ LOG_ERROR("ETM: register 0x%02x not available", id);
+ return NULL;
+}
+
+static void etm_reg_add(unsigned bcd_vers, struct arm_jtag *jtag_info,
+ struct reg_cache *cache, struct etm_reg *ereg,
+ const struct etm_reg_info *r, unsigned nreg)
{
- reg_cache_t *reg_cache = malloc(sizeof(reg_cache_t));
- reg_t *reg_list = NULL;
- etm_reg_t *arch_info = NULL;
- int num_regs = sizeof(etm_reg_arch_info)/sizeof(int);
- int i;
-
- /* register a register arch-type for etm registers only once */
- if (etm_reg_arch_type == -1)
- etm_reg_arch_type = register_reg_arch_type(etm_get_reg, etm_set_reg_w_exec);
-
+ struct reg *reg = cache->reg_list;
+
+ reg += cache->num_regs;
+ ereg += cache->num_regs;
+
+ /* add up to "nreg" registers from "r", if supported by this
+ * version of the ETM, to the specified cache.
+ */
+ for (; nreg--; r++) {
+
+ /* this ETM may be too old to have some registers */
+ if (r->bcd_vers > bcd_vers)
+ continue;
+
+ reg->name = r->name;
+ reg->size = r->size;
+ reg->value = &ereg->value;
+ reg->arch_info = ereg;
+ reg->type = &etm_scan6_type;
+ reg++;
+ cache->num_regs++;
+
+ ereg->reg_info = r;
+ ereg->jtag_info = jtag_info;
+ ereg++;
+ }
+}
+
+struct reg_cache *etm_build_reg_cache(struct target *target,
+ struct arm_jtag *jtag_info, struct etm_context *etm_ctx)
+{
+ struct reg_cache *reg_cache = malloc(sizeof(struct reg_cache));
+ struct reg *reg_list = NULL;
+ struct etm_reg *arch_info = NULL;
+ unsigned bcd_vers, config;
+
/* the actual registers are kept in two arrays */
- reg_list = calloc(num_regs, sizeof(reg_t));
- arch_info = calloc(num_regs, sizeof(etm_reg_t));
-
+ reg_list = calloc(128, sizeof(struct reg));
+ arch_info = calloc(128, sizeof(struct etm_reg));
+
/* fill in values for the reg cache */
reg_cache->name = "etm registers";
reg_cache->next = NULL;
reg_cache->reg_list = reg_list;
- reg_cache->num_regs = num_regs;
-
- /* set up registers */
- for (i = 0; i < num_regs; i++)
- {
- reg_list[i].name = etm_reg_list[i];
- reg_list[i].size = 32;
- reg_list[i].dirty = 0;
- reg_list[i].valid = 0;
- reg_list[i].bitfield_desc = NULL;
- reg_list[i].num_bitfields = 0;
- reg_list[i].value = calloc(1, 4);
- reg_list[i].arch_info = &arch_info[i];
- reg_list[i].arch_type = etm_reg_arch_type;
- reg_list[i].size = etm_reg_arch_size_info[i];
- arch_info[i].addr = etm_reg_arch_info[i];
- arch_info[i].jtag_info = jtag_info;
+ reg_cache->num_regs = 0;
+
+ /* add ETM_CONFIG, then parse its values to see
+ * which other registers exist in this ETM
+ */
+ etm_reg_add(0x10, jtag_info, reg_cache, arch_info,
+ etm_core, 1);
+
+ etm_get_reg(reg_list);
+ etm_ctx->config = buf_get_u32((void *)&arch_info->value, 0, 32);
+ config = etm_ctx->config;
+
+ /* figure ETM version then add base registers */
+ if (config & (1 << 31)) {
+ bcd_vers = 0x20;
+ LOG_WARNING("ETMv2+ support is incomplete");
+
+ /* REVISIT more registers may exist; they may now be
+ * readable; more register bits have defined meanings;
+ * don't presume trace start/stop support is present;
+ * and include any context ID comparator registers.
+ */
+ etm_reg_add(0x20, jtag_info, reg_cache, arch_info,
+ etm_core + 1, 1);
+ etm_get_reg(reg_list + 1);
+ etm_ctx->id = buf_get_u32(
+ (void *)&arch_info[1].value, 0, 32);
+ LOG_DEBUG("ETM ID: %08x", (unsigned) etm_ctx->id);
+ bcd_vers = 0x10 + (((etm_ctx->id) >> 4) & 0xff);
+
+ } else {
+ switch (config >> 28) {
+ case 7:
+ case 5:
+ case 3:
+ bcd_vers = 0x13;
+ break;
+ case 4:
+ case 2:
+ bcd_vers = 0x12;
+ break;
+ case 1:
+ bcd_vers = 0x11;
+ break;
+ case 0:
+ bcd_vers = 0x10;
+ break;
+ default:
+ LOG_WARNING("Bad ETMv1 protocol %d", config >> 28);
+ goto fail;
+ }
+ }
+ etm_ctx->bcd_vers = bcd_vers;
+ LOG_INFO("ETM v%d.%d", bcd_vers >> 4, bcd_vers & 0xf);
+
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_basic, ARRAY_SIZE(etm_basic));
+
+ /* address and data comparators; counters; outputs */
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_addr_comp, 4 * (0x0f & (config >> 0)));
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_data_comp, 2 * (0x0f & (config >> 4)));
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_counters, 4 * (0x07 & (config >> 13)));
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_outputs, (0x07 & (config >> 20)));
+
+ /* FIFOFULL presence is optional
+ * REVISIT for ETMv1.2 and later, don't bother adding this
+ * unless ETM_SYS_CONFIG says it's also *supported* ...
+ */
+ if (config & (1 << 23))
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_fifofull, ARRAY_SIZE(etm_fifofull));
+
+ /* sequencer is optional (for state-dependant triggering) */
+ if (config & (1 << 16))
+ etm_reg_add(bcd_vers, jtag_info, reg_cache, arch_info,
+ etm_sequencer, ARRAY_SIZE(etm_sequencer));
+
+ /* REVISIT could realloc and likely save half the memory
+ * in the two chunks we allocated...
+ */
+
+ /* the ETM might have an ETB connected */
+ if (strcmp(etm_ctx->capture_driver->name, "etb") == 0)
+ {
+ struct etb *etb = etm_ctx->capture_driver_priv;
+
+ if (!etb)
+ {
+ LOG_ERROR("etb selected as etm capture driver, but no ETB configured");
+ goto fail;
+ }
+
+ reg_cache->next = etb_build_reg_cache(etb);
+
+ etb->reg_cache = reg_cache->next;
}
+
+ etm_ctx->reg_cache = reg_cache;
return reg_cache;
+
+fail:
+ free(reg_cache);
+ free(reg_list);
+ free(arch_info);
+ return NULL;
+}
+
+static int etm_read_reg(struct reg *reg)
+{
+ return etm_read_reg_w_check(reg, NULL, NULL);
+}
+
+static int etm_store_reg(struct reg *reg)
+{
+ return etm_write_reg(reg, buf_get_u32(reg->value, 0, reg->size));
+}
+
+int etm_setup(struct target *target)
+{
+ int retval;
+ uint32_t etm_ctrl_value;
+ struct arm *arm = target_to_arm(target);
+ struct etm_context *etm_ctx = arm->etm;
+ struct reg *etm_ctrl_reg;
+
+ etm_ctrl_reg = etm_reg_lookup(etm_ctx, ETM_CTRL);
+ if (!etm_ctrl_reg)
+ return ERROR_OK;
+
+ /* initialize some ETM control register settings */
+ etm_get_reg(etm_ctrl_reg);
+ etm_ctrl_value = buf_get_u32(etm_ctrl_reg->value, 0, 32);
+
+ /* clear the ETM powerdown bit (0) */
+ etm_ctrl_value &= ~ETM_CTRL_POWERDOWN;
+
+ /* configure port width (21,6:4), mode (13,17:16) and
+ * for older modules clocking (13)
+ */
+ etm_ctrl_value = (etm_ctrl_value
+ & ~ETM_PORT_WIDTH_MASK
+ & ~ETM_PORT_MODE_MASK
+ & ~ETM_CTRL_DBGRQ
+ & ~ETM_PORT_CLOCK_MASK)
+ | etm_ctx->control;
+
+ buf_set_u32(etm_ctrl_reg->value, 0, 32, etm_ctrl_value);
+ etm_store_reg(etm_ctrl_reg);
+
+ etm_ctx->control = etm_ctrl_value;
+
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
+ return retval;
+
+ /* REVISIT for ETMv3.0 and later, read ETM_sys_config to
+ * verify that those width and mode settings are OK ...
+ */
+
+ if ((retval = etm_ctx->capture_driver->init(etm_ctx)) != ERROR_OK)
+ {
+ LOG_ERROR("ETM capture driver initialization failed");
+ return retval;
+ }
+ return ERROR_OK;
}
-int etm_get_reg(reg_t *reg)
+static int etm_get_reg(struct reg *reg)
{
- if (etm_read_reg(reg) != ERROR_OK)
+ int retval;
+
+ if ((retval = etm_read_reg(reg)) != ERROR_OK)
{
- ERROR("BUG: error scheduling etm register read");
- exit(-1);
+ LOG_ERROR("BUG: error scheduling etm register read");
+ return retval;
}
-
- if (jtag_execute_queue() != ERROR_OK)
+
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("register read failed");
+ LOG_ERROR("register read failed");
+ return retval;
}
-
+
return ERROR_OK;
}
-int etm_read_reg_w_check(reg_t *reg, u8* check_value, u8* check_mask)
+static int etm_read_reg_w_check(struct reg *reg,
+ uint8_t* check_value, uint8_t* check_mask)
{
- etm_reg_t *etm_reg = reg->arch_info;
- u8 reg_addr = etm_reg->addr & 0x7f;
- scan_field_t fields[3];
-
- DEBUG("%i", etm_reg->addr);
+ struct etm_reg *etm_reg = reg->arch_info;
+ const struct etm_reg_info *r = etm_reg->reg_info;
+ uint8_t reg_addr = r->addr & 0x7f;
+ struct scan_field fields[3];
+
+ if (etm_reg->reg_info->mode == WO) {
+ LOG_ERROR("BUG: can't read write-only register %s", r->name);
+ return ERROR_INVALID_ARGUMENTS;
+ }
- jtag_add_end_state(TAP_RTI);
+ LOG_DEBUG("%s (%u)", r->name, reg_addr);
+
+ jtag_set_end_state(TAP_IDLE);
arm_jtag_scann(etm_reg->jtag_info, 0x6);
arm_jtag_set_instr(etm_reg->jtag_info, etm_reg->jtag_info->intest_instr, NULL);
-
- fields[0].device = etm_reg->jtag_info->chain_pos;
+
+ fields[0].tap = etm_reg->jtag_info->tap;
fields[0].num_bits = 32;
fields[0].out_value = reg->value;
- fields[0].out_mask = NULL;
fields[0].in_value = NULL;
- fields[0].in_check_value = NULL;
- fields[0].in_check_mask = NULL;
- fields[0].in_handler = NULL;
- fields[0].in_handler_priv = NULL;
-
- fields[1].device = etm_reg->jtag_info->chain_pos;
+ fields[0].check_value = NULL;
+ fields[0].check_mask = NULL;
+
+ fields[1].tap = etm_reg->jtag_info->tap;
fields[1].num_bits = 7;
fields[1].out_value = malloc(1);
buf_set_u32(fields[1].out_value, 0, 7, reg_addr);
- fields[1].out_mask = NULL;
fields[1].in_value = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
+ fields[1].check_value = NULL;
+ fields[1].check_mask = NULL;
- fields[2].device = etm_reg->jtag_info->chain_pos;
+ fields[2].tap = etm_reg->jtag_info->tap;
fields[2].num_bits = 1;
fields[2].out_value = malloc(1);
buf_set_u32(fields[2].out_value, 0, 1, 0);
- fields[2].out_mask = NULL;
fields[2].in_value = NULL;
- fields[2].in_check_value = NULL;
- fields[2].in_check_mask = NULL;
- fields[2].in_handler = NULL;
- fields[2].in_handler_priv = NULL;
-
- jtag_add_dr_scan(3, fields, -1, NULL);
-
+ fields[2].check_value = NULL;
+ fields[2].check_mask = NULL;
+
+ jtag_add_dr_scan(3, fields, jtag_get_end_state());
+
fields[0].in_value = reg->value;
- fields[0].in_check_value = check_value;
- fields[0].in_check_mask = check_mask;
-
- jtag_add_dr_scan(3, fields, -1, NULL);
+ fields[0].check_value = check_value;
+ fields[0].check_mask = check_mask;
+
+ jtag_add_dr_scan_check(3, fields, jtag_get_end_state());
free(fields[1].out_value);
free(fields[2].out_value);
-
+
return ERROR_OK;
}
-int etm_read_reg(reg_t *reg)
+static int etm_set_reg(struct reg *reg, uint32_t value)
{
- return etm_read_reg_w_check(reg, NULL, NULL);
-}
+ int retval;
-int etm_set_reg(reg_t *reg, u32 value)
-{
- if (etm_write_reg(reg, value) != ERROR_OK)
+ if ((retval = etm_write_reg(reg, value)) != ERROR_OK)
{
- ERROR("BUG: error scheduling etm register write");
- exit(-1);
+ LOG_ERROR("BUG: error scheduling etm register write");
+ return retval;
}
-
+
buf_set_u32(reg->value, 0, reg->size, value);
reg->valid = 1;
reg->dirty = 0;
-
+
return ERROR_OK;
}
-int etm_set_reg_w_exec(reg_t *reg, u8 *buf)
+static int etm_set_reg_w_exec(struct reg *reg, uint8_t *buf)
{
+ int retval;
+
etm_set_reg(reg, buf_get_u32(buf, 0, reg->size));
-
- if (jtag_execute_queue() != ERROR_OK)
+
+ if ((retval = jtag_execute_queue()) != ERROR_OK)
{
- ERROR("register write failed");
- exit(-1);
+ LOG_ERROR("register write failed");
+ return retval;
}
return ERROR_OK;
}
-int etm_write_reg(reg_t *reg, u32 value)
+static int etm_write_reg(struct reg *reg, uint32_t value)
{
- etm_reg_t *etm_reg = reg->arch_info;
- u8 reg_addr = etm_reg->addr & 0x7f;
- scan_field_t fields[3];
-
- DEBUG("%i: 0x%8.8x", etm_reg->addr, value);
-
- jtag_add_end_state(TAP_RTI);
+ struct etm_reg *etm_reg = reg->arch_info;
+ const struct etm_reg_info *r = etm_reg->reg_info;
+ uint8_t reg_addr = r->addr & 0x7f;
+ struct scan_field fields[3];
+
+ if (etm_reg->reg_info->mode == RO) {
+ LOG_ERROR("BUG: can't write read--only register %s", r->name);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+
+ LOG_DEBUG("%s (%u): 0x%8.8" PRIx32 "", r->name, reg_addr, value);
+
+ jtag_set_end_state(TAP_IDLE);
arm_jtag_scann(etm_reg->jtag_info, 0x6);
arm_jtag_set_instr(etm_reg->jtag_info, etm_reg->jtag_info->intest_instr, NULL);
-
- fields[0].device = etm_reg->jtag_info->chain_pos;
+
+ fields[0].tap = etm_reg->jtag_info->tap;
fields[0].num_bits = 32;
- fields[0].out_value = malloc(4);
+ uint8_t tmp1[4];
+ fields[0].out_value = tmp1;
buf_set_u32(fields[0].out_value, 0, 32, value);
- fields[0].out_mask = NULL;
fields[0].in_value = NULL;
- fields[0].in_check_value = NULL;
- fields[0].in_check_mask = NULL;
- fields[0].in_handler = NULL;
- fields[0].in_handler_priv = NULL;
-
- fields[1].device = etm_reg->jtag_info->chain_pos;
+
+ fields[1].tap = etm_reg->jtag_info->tap;
fields[1].num_bits = 7;
- fields[1].out_value = malloc(1);
+ uint8_t tmp2;
+ fields[1].out_value = &tmp2;
buf_set_u32(fields[1].out_value, 0, 7, reg_addr);
- fields[1].out_mask = NULL;
fields[1].in_value = NULL;
- fields[1].in_check_value = NULL;
- fields[1].in_check_mask = NULL;
- fields[1].in_handler = NULL;
- fields[1].in_handler_priv = NULL;
- fields[2].device = etm_reg->jtag_info->chain_pos;
+ fields[2].tap = etm_reg->jtag_info->tap;
fields[2].num_bits = 1;
- fields[2].out_value = malloc(1);
+ uint8_t tmp3;
+ fields[2].out_value = &tmp3;
buf_set_u32(fields[2].out_value, 0, 1, 1);
- fields[2].out_mask = NULL;
fields[2].in_value = NULL;
- fields[2].in_check_value = NULL;
- fields[2].in_check_mask = NULL;
- fields[2].in_handler = NULL;
- fields[2].in_handler_priv = NULL;
-
- jtag_add_dr_scan(3, fields, -1, NULL);
-
- free(fields[0].out_value);
- free(fields[1].out_value);
- free(fields[2].out_value);
-
+
+ jtag_add_dr_scan(3, fields, jtag_get_end_state());
+
return ERROR_OK;
}
-int etm_store_reg(reg_t *reg)
+
+/* ETM trace analysis functionality */
+
+static struct etm_capture_driver *etm_capture_drivers[] =
{
- return etm_write_reg(reg, buf_get_u32(reg->value, 0, reg->size));
+ &etb_capture_driver,
+ &etm_dummy_capture_driver,
+#if BUILD_OOCD_TRACE == 1
+ &oocd_trace_capture_driver,
+#endif
+ NULL
+};
+
+static int etm_read_instruction(struct etm_context *ctx, struct arm_instruction *instruction)
+{
+ int i;
+ int section = -1;
+ size_t size_read;
+ uint32_t opcode;
+ int retval;
+
+ if (!ctx->image)
+ return ERROR_TRACE_IMAGE_UNAVAILABLE;
+
+ /* search for the section the current instruction belongs to */
+ for (i = 0; i < ctx->image->num_sections; i++)
+ {
+ if ((ctx->image->sections[i].base_address <= ctx->current_pc) &&
+ (ctx->image->sections[i].base_address + ctx->image->sections[i].size > ctx->current_pc))
+ {
+ section = i;
+ break;
+ }
+ }
+
+ if (section == -1)
+ {
+ /* current instruction couldn't be found in the image */
+ return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
+ }
+
+ if (ctx->core_state == ARM_STATE_ARM)
+ {
+ uint8_t buf[4];
+ if ((retval = image_read_section(ctx->image, section,
+ ctx->current_pc - ctx->image->sections[section].base_address,
+ 4, buf, &size_read)) != ERROR_OK)
+ {
+ LOG_ERROR("error while reading instruction: %i", retval);
+ return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
+ }
+ opcode = target_buffer_get_u32(ctx->target, buf);
+ arm_evaluate_opcode(opcode, ctx->current_pc, instruction);
+ }
+ else if (ctx->core_state == ARM_STATE_THUMB)
+ {
+ uint8_t buf[2];
+ if ((retval = image_read_section(ctx->image, section,
+ ctx->current_pc - ctx->image->sections[section].base_address,
+ 2, buf, &size_read)) != ERROR_OK)
+ {
+ LOG_ERROR("error while reading instruction: %i", retval);
+ return ERROR_TRACE_INSTRUCTION_UNAVAILABLE;
+ }
+ opcode = target_buffer_get_u16(ctx->target, buf);
+ thumb_evaluate_opcode(opcode, ctx->current_pc, instruction);
+ }
+ else if (ctx->core_state == ARM_STATE_JAZELLE)
+ {
+ LOG_ERROR("BUG: tracing of jazelle code not supported");
+ return ERROR_FAIL;
+ }
+ else
+ {
+ LOG_ERROR("BUG: unknown core state encountered");
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
+static int etmv1_next_packet(struct etm_context *ctx, uint8_t *packet, int apo)
+{
+ while (ctx->data_index < ctx->trace_depth)
+ {
+ /* if the caller specified an address packet offset, skip until the
+ * we reach the n-th cycle marked with tracesync */
+ if (apo > 0)
+ {
+ if (ctx->trace_data[ctx->data_index].flags & ETMV1_TRACESYNC_CYCLE)
+ apo--;
+
+ if (apo > 0)
+ {
+ ctx->data_index++;
+ ctx->data_half = 0;
+ }
+ continue;
+ }
+
+ /* no tracedata output during a TD cycle
+ * or in a trigger cycle */
+ if ((ctx->trace_data[ctx->data_index].pipestat == STAT_TD)
+ || (ctx->trace_data[ctx->data_index].flags & ETMV1_TRIGGER_CYCLE))
+ {
+ ctx->data_index++;
+ ctx->data_half = 0;
+ continue;
+ }
+
+ /* FIXME there are more port widths than these... */
+ if ((ctx->control & ETM_PORT_WIDTH_MASK) == ETM_PORT_16BIT)
+ {
+ if (ctx->data_half == 0)
+ {
+ *packet = ctx->trace_data[ctx->data_index].packet & 0xff;
+ ctx->data_half = 1;
+ }
+ else
+ {
+ *packet = (ctx->trace_data[ctx->data_index].packet & 0xff00) >> 8;
+ ctx->data_half = 0;
+ ctx->data_index++;
+ }
+ }
+ else if ((ctx->control & ETM_PORT_WIDTH_MASK) == ETM_PORT_8BIT)
+ {
+ *packet = ctx->trace_data[ctx->data_index].packet & 0xff;
+ ctx->data_index++;
+ }
+ else
+ {
+ /* on a 4-bit port, a packet will be output during two consecutive cycles */
+ if (ctx->data_index > (ctx->trace_depth - 2))
+ return -1;
+
+ *packet = ctx->trace_data[ctx->data_index].packet & 0xf;
+ *packet |= (ctx->trace_data[ctx->data_index + 1].packet & 0xf) << 4;
+ ctx->data_index += 2;
+ }
+
+ return 0;
+ }
+
+ return -1;
+}
+
+static int etmv1_branch_address(struct etm_context *ctx)
+{
+ int retval;
+ uint8_t packet;
+ int shift = 0;
+ int apo;
+ uint32_t i;
+
+ /* quit analysis if less than two cycles are left in the trace
+ * because we can't extract the APO */
+ if (ctx->data_index > (ctx->trace_depth - 2))
+ return -1;
+
+ /* a BE could be output during an APO cycle, skip the current
+ * and continue with the new one */
+ if (ctx->trace_data[ctx->pipe_index + 1].pipestat & 0x4)
+ return 1;
+ if (ctx->trace_data[ctx->pipe_index + 2].pipestat & 0x4)
+ return 2;
+
+ /* address packet offset encoded in the next two cycles' pipestat bits */
+ apo = ctx->trace_data[ctx->pipe_index + 1].pipestat & 0x3;
+ apo |= (ctx->trace_data[ctx->pipe_index + 2].pipestat & 0x3) << 2;
+
+ /* count number of tracesync cycles between current pipe_index and data_index
+ * i.e. the number of tracesyncs that data_index already passed by
+ * to subtract them from the APO */
+ for (i = ctx->pipe_index; i < ctx->data_index; i++)
+ {
+ if (ctx->trace_data[ctx->pipe_index + 1].pipestat & ETMV1_TRACESYNC_CYCLE)
+ apo--;
+ }
+
+ /* extract up to four 7-bit packets */
+ do {
+ if ((retval = etmv1_next_packet(ctx, &packet, (shift == 0) ? apo + 1 : 0)) != 0)
+ return -1;
+ ctx->last_branch &= ~(0x7f << shift);
+ ctx->last_branch |= (packet & 0x7f) << shift;
+ shift += 7;
+ } while ((packet & 0x80) && (shift < 28));
+
+ /* one last packet holding 4 bits of the address, plus the branch reason code */
+ if ((shift == 28) && (packet & 0x80))
+ {
+ if ((retval = etmv1_next_packet(ctx, &packet, 0)) != 0)
+ return -1;
+ ctx->last_branch &= 0x0fffffff;
+ ctx->last_branch |= (packet & 0x0f) << 28;
+ ctx->last_branch_reason = (packet & 0x70) >> 4;
+ shift += 4;
+ }
+ else
+ {
+ ctx->last_branch_reason = 0;
+ }
+
+ if (shift == 32)
+ {
+ ctx->pc_ok = 1;
+ }
+
+ /* if a full address was output, we might have branched into Jazelle state */
+ if ((shift == 32) && (packet & 0x80))
+ {
+ ctx->core_state = ARM_STATE_JAZELLE;
+ }
+ else
+ {
+ /* if we didn't branch into Jazelle state, the current processor state is
+ * encoded in bit 0 of the branch target address */
+ if (ctx->last_branch & 0x1)
+ {
+ ctx->core_state = ARM_STATE_THUMB;
+ ctx->last_branch &= ~0x1;
+ }
+ else
+ {
+ ctx->core_state = ARM_STATE_ARM;
+ ctx->last_branch &= ~0x3;
+ }
+ }
+
+ return 0;
+}
+
+static int etmv1_data(struct etm_context *ctx, int size, uint32_t *data)
+{
+ int j;
+ uint8_t buf[4];
+ int retval;
+
+ for (j = 0; j < size; j++)
+ {
+ if ((retval = etmv1_next_packet(ctx, &buf[j], 0)) != 0)
+ return -1;
+ }
+
+ if (size == 8)
+ {
+ LOG_ERROR("TODO: add support for 64-bit values");
+ return -1;
+ }
+ else if (size == 4)
+ *data = target_buffer_get_u32(ctx->target, buf);
+ else if (size == 2)
+ *data = target_buffer_get_u16(ctx->target, buf);
+ else if (size == 1)
+ *data = buf[0];
+ else
+ return -1;
+
+ return 0;
}
+static int etmv1_analyze_trace(struct etm_context *ctx, struct command_context *cmd_ctx)
+{
+ int retval;
+ struct arm_instruction instruction;
+
+ /* read the trace data if it wasn't read already */
+ if (ctx->trace_depth == 0)
+ ctx->capture_driver->read_trace(ctx);
+
+ /* start at the beginning of the captured trace */
+ ctx->pipe_index = 0;
+ ctx->data_index = 0;
+ ctx->data_half = 0;
+
+ /* neither the PC nor the data pointer are valid */
+ ctx->pc_ok = 0;
+ ctx->ptr_ok = 0;
+
+ while (ctx->pipe_index < ctx->trace_depth)
+ {
+ uint8_t pipestat = ctx->trace_data[ctx->pipe_index].pipestat;
+ uint32_t next_pc = ctx->current_pc;
+ uint32_t old_data_index = ctx->data_index;
+ uint32_t old_data_half = ctx->data_half;
+ uint32_t old_index = ctx->pipe_index;
+ uint32_t last_instruction = ctx->last_instruction;
+ uint32_t cycles = 0;
+ int current_pc_ok = ctx->pc_ok;
+
+ if (ctx->trace_data[ctx->pipe_index].flags & ETMV1_TRIGGER_CYCLE)
+ {
+ command_print(cmd_ctx, "--- trigger ---");
+ }
+
+ /* instructions execute in IE/D or BE/D cycles */
+ if ((pipestat == STAT_IE) || (pipestat == STAT_ID))
+ ctx->last_instruction = ctx->pipe_index;
+
+ /* if we don't have a valid pc skip until we reach an indirect branch */
+ if ((!ctx->pc_ok) && (pipestat != STAT_BE))
+ {
+ ctx->pipe_index++;
+ continue;
+ }
+
+ /* any indirect branch could have interrupted instruction flow
+ * - the branch reason code could indicate a trace discontinuity
+ * - a branch to the exception vectors indicates an exception
+ */
+ if ((pipestat == STAT_BE) || (pipestat == STAT_BD))
+ {
+ /* backup current data index, to be able to consume the branch address
+ * before examining data address and values
+ */
+ old_data_index = ctx->data_index;
+ old_data_half = ctx->data_half;
+
+ ctx->last_instruction = ctx->pipe_index;
+
+ if ((retval = etmv1_branch_address(ctx)) != 0)
+ {
+ /* negative return value from etmv1_branch_address means we ran out of packets,
+ * quit analysing the trace */
+ if (retval < 0)
+ break;
+
+ /* a positive return values means the current branch was abandoned,
+ * and a new branch was encountered in cycle ctx->pipe_index + retval;
+ */
+ LOG_WARNING("abandoned branch encountered, correctnes of analysis uncertain");
+ ctx->pipe_index += retval;
+ continue;
+ }
+
+ /* skip over APO cycles */
+ ctx->pipe_index += 2;
+
+ switch (ctx->last_branch_reason)
+ {
+ case 0x0: /* normal PC change */
+ next_pc = ctx->last_branch;
+ break;
+ case 0x1: /* tracing enabled */
+ command_print(cmd_ctx, "--- tracing enabled at 0x%8.8" PRIx32 " ---", ctx->last_branch);
+ ctx->current_pc = ctx->last_branch;
+ ctx->pipe_index++;
+ continue;
+ break;
+ case 0x2: /* trace restarted after FIFO overflow */
+ command_print(cmd_ctx, "--- trace restarted after FIFO overflow at 0x%8.8" PRIx32 " ---", ctx->last_branch);
+ ctx->current_pc = ctx->last_branch;
+ ctx->pipe_index++;
+ continue;
+ break;
+ case 0x3: /* exit from debug state */
+ command_print(cmd_ctx, "--- exit from debug state at 0x%8.8" PRIx32 " ---", ctx->last_branch);
+ ctx->current_pc = ctx->last_branch;
+ ctx->pipe_index++;
+ continue;
+ break;
+ case 0x4: /* periodic synchronization point */
+ next_pc = ctx->last_branch;
+ /* if we had no valid PC prior to this synchronization point,
+ * we have to move on with the next trace cycle
+ */
+ if (!current_pc_ok)
+ {
+ command_print(cmd_ctx, "--- periodic synchronization point at 0x%8.8" PRIx32 " ---", next_pc);
+ ctx->current_pc = next_pc;
+ ctx->pipe_index++;
+ continue;
+ }
+ break;
+ default: /* reserved */
+ LOG_ERROR("BUG: branch reason code 0x%" PRIx32 " is reserved", ctx->last_branch_reason);
+ return ERROR_FAIL;
+ }
+
+ /* if we got here the branch was a normal PC change
+ * (or a periodic synchronization point, which means the same for that matter)
+ * if we didn't accquire a complete PC continue with the next cycle
+ */
+ if (!ctx->pc_ok)
+ continue;
+
+ /* indirect branch to the exception vector means an exception occured */
+ if ((ctx->last_branch <= 0x20)
+ || ((ctx->last_branch >= 0xffff0000) && (ctx->last_branch <= 0xffff0020)))
+ {
+ if ((ctx->last_branch & 0xff) == 0x10)
+ {
+ command_print(cmd_ctx, "data abort");
+ }
+ else
+ {
+ command_print(cmd_ctx, "exception vector 0x%2.2" PRIx32 "", ctx->last_branch);
+ ctx->current_pc = ctx->last_branch;
+ ctx->pipe_index++;
+ continue;
+ }
+ }
+ }
+
+ /* an instruction was executed (or not, depending on the condition flags)
+ * retrieve it from the image for displaying */
+ if (ctx->pc_ok && (pipestat != STAT_WT) && (pipestat != STAT_TD) &&
+ !(((pipestat == STAT_BE) || (pipestat == STAT_BD)) &&
+ ((ctx->last_branch_reason != 0x0) && (ctx->last_branch_reason != 0x4))))
+ {
+ if ((retval = etm_read_instruction(ctx, &instruction)) != ERROR_OK)
+ {
+ /* can't continue tracing with no image available */
+ if (retval == ERROR_TRACE_IMAGE_UNAVAILABLE)
+ {
+ return retval;
+ }
+ else if (retval == ERROR_TRACE_INSTRUCTION_UNAVAILABLE)
+ {
+ /* TODO: handle incomplete images
+ * for now we just quit the analsysis*/
+ return retval;
+ }
+ }
+
+ cycles = old_index - last_instruction;
+ }
+
+ if ((pipestat == STAT_ID) || (pipestat == STAT_BD))
+ {
+ uint32_t new_data_index = ctx->data_index;
+ uint32_t new_data_half = ctx->data_half;
+
+ /* in case of a branch with data, the branch target address was consumed before
+ * we temporarily go back to the saved data index */
+ if (pipestat == STAT_BD)
+ {
+ ctx->data_index = old_data_index;
+ ctx->data_half = old_data_half;
+ }
+
+ if (ctx->control & ETM_CTRL_TRACE_ADDR)
+ {
+ uint8_t packet;
+ int shift = 0;
+
+ do {
+ if ((retval = etmv1_next_packet(ctx, &packet, 0)) != 0)
+ return ERROR_ETM_ANALYSIS_FAILED;
+ ctx->last_ptr &= ~(0x7f << shift);
+ ctx->last_ptr |= (packet & 0x7f) << shift;
+ shift += 7;
+ } while ((packet & 0x80) && (shift < 32));
+
+ if (shift >= 32)
+ ctx->ptr_ok = 1;
+
+ if (ctx->ptr_ok)
+ {
+ command_print(cmd_ctx, "address: 0x%8.8" PRIx32 "", ctx->last_ptr);
+ }
+ }
+
+ if (ctx->control & ETM_CTRL_TRACE_DATA)
+ {
+ if ((instruction.type == ARM_LDM) || (instruction.type == ARM_STM))
+ {
+ int i;
+ for (i = 0; i < 16; i++)
+ {
+ if (instruction.info.load_store_multiple.register_list & (1 << i))
+ {
+ uint32_t data;
+ if (etmv1_data(ctx, 4, &data) != 0)
+ return ERROR_ETM_ANALYSIS_FAILED;
+ command_print(cmd_ctx, "data: 0x%8.8" PRIx32 "", data);
+ }
+ }
+ }
+ else if ((instruction.type >= ARM_LDR) && (instruction.type <= ARM_STRH))
+ {
+ uint32_t data;
+ if (etmv1_data(ctx, arm_access_size(&instruction), &data) != 0)
+ return ERROR_ETM_ANALYSIS_FAILED;
+ command_print(cmd_ctx, "data: 0x%8.8" PRIx32 "", data);
+ }
+ }
+
+ /* restore data index after consuming BD address and data */
+ if (pipestat == STAT_BD)
+ {
+ ctx->data_index = new_data_index;
+ ctx->data_half = new_data_half;
+ }
+ }
+
+ /* adjust PC */
+ if ((pipestat == STAT_IE) || (pipestat == STAT_ID))
+ {
+ if (((instruction.type == ARM_B) ||
+ (instruction.type == ARM_BL) ||
+ (instruction.type == ARM_BLX)) &&
+ (instruction.info.b_bl_bx_blx.target_address != 0xffffffff))
+ {
+ next_pc = instruction.info.b_bl_bx_blx.target_address;
+ }
+ else
+ {
+ next_pc += (ctx->core_state == ARM_STATE_ARM) ? 4 : 2;
+ }
+ }
+ else if (pipestat == STAT_IN)
+ {
+ next_pc += (ctx->core_state == ARM_STATE_ARM) ? 4 : 2;
+ }
+
+ if ((pipestat != STAT_TD) && (pipestat != STAT_WT))
+ {
+ char cycles_text[32] = "";
+
+ /* if the trace was captured with cycle accurate tracing enabled,
+ * output the number of cycles since the last executed instruction
+ */
+ if (ctx->control & ETM_CTRL_CYCLE_ACCURATE)
+ {
+ snprintf(cycles_text, 32, " (%i %s)",
+ (int)cycles,
+ (cycles == 1) ? "cycle" : "cycles");
+ }
+
+ command_print(cmd_ctx, "%s%s%s",
+ instruction.text,
+ (pipestat == STAT_IN) ? " (not executed)" : "",
+ cycles_text);
+
+ ctx->current_pc = next_pc;
+
+ /* packets for an instruction don't start on or before the preceding
+ * functional pipestat (i.e. other than WT or TD)
+ */
+ if (ctx->data_index <= ctx->pipe_index)
+ {
+ ctx->data_index = ctx->pipe_index + 1;
+ ctx->data_half = 0;
+ }
+ }
+
+ ctx->pipe_index += 1;
+ }
+
+ return ERROR_OK;
+}
+
+static COMMAND_HELPER(handle_etm_tracemode_command_update,
+ uint32_t *mode)
+{
+ uint32_t tracemode;
+
+ /* what parts of data access are traced? */
+ if (strcmp(CMD_ARGV[0], "none") == 0)
+ tracemode = 0;
+ else if (strcmp(CMD_ARGV[0], "data") == 0)
+ tracemode = ETM_CTRL_TRACE_DATA;
+ else if (strcmp(CMD_ARGV[0], "address") == 0)
+ tracemode = ETM_CTRL_TRACE_ADDR;
+ else if (strcmp(CMD_ARGV[0], "all") == 0)
+ tracemode = ETM_CTRL_TRACE_DATA | ETM_CTRL_TRACE_ADDR;
+ else
+ {
+ command_print(CMD_CTX, "invalid option '%s'", CMD_ARGV[0]);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+
+ uint8_t context_id;
+ COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], context_id);
+ switch (context_id)
+ {
+ case 0:
+ tracemode |= ETM_CTRL_CONTEXTID_NONE;
+ break;
+ case 8:
+ tracemode |= ETM_CTRL_CONTEXTID_8;
+ break;
+ case 16:
+ tracemode |= ETM_CTRL_CONTEXTID_16;
+ break;
+ case 32:
+ tracemode |= ETM_CTRL_CONTEXTID_32;
+ break;
+ default:
+ command_print(CMD_CTX, "invalid option '%s'", CMD_ARGV[1]);
+ return ERROR_INVALID_ARGUMENTS;
+ }
+
+ bool etmv1_cycle_accurate;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[2], etmv1_cycle_accurate);
+ if (etmv1_cycle_accurate)
+ tracemode |= ETM_CTRL_CYCLE_ACCURATE;
+
+ bool etmv1_branch_output;
+ COMMAND_PARSE_ENABLE(CMD_ARGV[3], etmv1_branch_output);
+ if (etmv1_branch_output)
+ tracemode |= ETM_CTRL_BRANCH_OUTPUT;
+
+ /* IGNORED:
+ * - CPRT tracing (coprocessor register transfers)
+ * - debug request (causes debug entry on trigger)
+ * - stall on FIFOFULL (preventing tracedata lossage)
+ */
+ *mode = tracemode;
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_tracemode_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+ struct arm *arm = target_to_arm(target);
+ struct etm_context *etm;
+
+ if (!is_arm(arm)) {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm = arm->etm;
+ if (!etm) {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ uint32_t tracemode = etm->control;
+
+ switch (CMD_ARGC)
+ {
+ case 0:
+ break;
+ case 4:
+ CALL_COMMAND_HANDLER(handle_etm_tracemode_command_update,
+ &tracemode);
+ break;
+ default:
+ command_print(CMD_CTX, "usage: tracemode "
+ "('none'|'data'|'address'|'all') "
+ "context_id_bits "
+ "('enable'|'disable') "
+ "('enable'|'disable')"
+ );
+ return ERROR_FAIL;
+ }
+
+ /**
+ * todo: fail if parameters were invalid for this hardware,
+ * or couldn't be written; display actual hardware state...
+ */
+
+ command_print(CMD_CTX, "current tracemode configuration:");
+
+ switch (tracemode & ETM_CTRL_TRACE_MASK)
+ {
+ default:
+ command_print(CMD_CTX, "data tracing: none");
+ break;
+ case ETM_CTRL_TRACE_DATA:
+ command_print(CMD_CTX, "data tracing: data only");
+ break;
+ case ETM_CTRL_TRACE_ADDR:
+ command_print(CMD_CTX, "data tracing: address only");
+ break;
+ case ETM_CTRL_TRACE_DATA | ETM_CTRL_TRACE_ADDR:
+ command_print(CMD_CTX, "data tracing: address and data");
+ break;
+ }
+
+ switch (tracemode & ETM_CTRL_CONTEXTID_MASK)
+ {
+ case ETM_CTRL_CONTEXTID_NONE:
+ command_print(CMD_CTX, "contextid tracing: none");
+ break;
+ case ETM_CTRL_CONTEXTID_8:
+ command_print(CMD_CTX, "contextid tracing: 8 bit");
+ break;
+ case ETM_CTRL_CONTEXTID_16:
+ command_print(CMD_CTX, "contextid tracing: 16 bit");
+ break;
+ case ETM_CTRL_CONTEXTID_32:
+ command_print(CMD_CTX, "contextid tracing: 32 bit");
+ break;
+ }
+
+ if (tracemode & ETM_CTRL_CYCLE_ACCURATE)
+ {
+ command_print(CMD_CTX, "cycle-accurate tracing enabled");
+ }
+ else
+ {
+ command_print(CMD_CTX, "cycle-accurate tracing disabled");
+ }
+
+ if (tracemode & ETM_CTRL_BRANCH_OUTPUT)
+ {
+ command_print(CMD_CTX, "full branch address output enabled");
+ }
+ else
+ {
+ command_print(CMD_CTX, "full branch address output disabled");
+ }
+
+#define TRACEMODE_MASK ( \
+ ETM_CTRL_CONTEXTID_MASK \
+ | ETM_CTRL_BRANCH_OUTPUT \
+ | ETM_CTRL_CYCLE_ACCURATE \
+ | ETM_CTRL_TRACE_MASK \
+ )
+
+ /* only update ETM_CTRL register if tracemode changed */
+ if ((etm->control & TRACEMODE_MASK) != tracemode)
+ {
+ struct reg *etm_ctrl_reg;
+
+ etm_ctrl_reg = etm_reg_lookup(etm, ETM_CTRL);
+ if (!etm_ctrl_reg)
+ return ERROR_FAIL;
+
+ etm->control &= ~TRACEMODE_MASK;
+ etm->control |= tracemode & TRACEMODE_MASK;
+
+ buf_set_u32(etm_ctrl_reg->value, 0, 32, etm->control);
+ etm_store_reg(etm_ctrl_reg);
+
+ /* invalidate old trace data */
+ etm->capture_status = TRACE_IDLE;
+ if (etm->trace_depth > 0)
+ {
+ free(etm->trace_data);
+ etm->trace_data = NULL;
+ }
+ etm->trace_depth = 0;
+ }
+
+#undef TRACEMODE_MASK
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_config_command)
+{
+ struct target *target;
+ struct arm *arm;
+ uint32_t portmode = 0x0;
+ struct etm_context *etm_ctx;
+ int i;
+
+ if (CMD_ARGC != 5)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ target = get_target(CMD_ARGV[0]);
+ if (!target)
+ {
+ LOG_ERROR("target '%s' not defined", CMD_ARGV[0]);
+ return ERROR_FAIL;
+ }
+
+ arm = target_to_arm(target);
+ if (!is_arm(arm)) {
+ command_print(CMD_CTX, "target '%s' is '%s'; not an ARM",
+ target_name(target),
+ target_type_name(target));
+ return ERROR_FAIL;
+ }
+
+ /* FIXME for ETMv3.0 and above -- and we don't yet know what ETM
+ * version we'll be using!! -- so we can't know how to validate
+ * params yet. "etm config" should likely be *AFTER* hookup...
+ *
+ * - Many more widths might be supported ... and we can easily
+ * check whether our setting "took".
+ *
+ * - The "clock" and "mode" bits are interpreted differently.
+ * See ARM IHI 0014O table 2-17 for the old behavior, and
+ * table 2-18 for the new. With ETB it's best to specify
+ * "normal full" ...
+ */
+ uint8_t port_width;
+ COMMAND_PARSE_NUMBER(u8, CMD_ARGV[1], port_width);
+ switch (port_width)
+ {
+ /* before ETMv3.0 */
+ case 4:
+ portmode |= ETM_PORT_4BIT;
+ break;
+ case 8:
+ portmode |= ETM_PORT_8BIT;
+ break;
+ case 16:
+ portmode |= ETM_PORT_16BIT;
+ break;
+ /* ETMv3.0 and later*/
+ case 24:
+ portmode |= ETM_PORT_24BIT;
+ break;
+ case 32:
+ portmode |= ETM_PORT_32BIT;
+ break;
+ case 48:
+ portmode |= ETM_PORT_48BIT;
+ break;
+ case 64:
+ portmode |= ETM_PORT_64BIT;
+ break;
+ case 1:
+ portmode |= ETM_PORT_1BIT;
+ break;
+ case 2:
+ portmode |= ETM_PORT_2BIT;
+ break;
+ default:
+ command_print(CMD_CTX,
+ "unsupported ETM port width '%s'", CMD_ARGV[1]);
+ return ERROR_FAIL;
+ }
+
+ if (strcmp("normal", CMD_ARGV[2]) == 0)
+ {
+ portmode |= ETM_PORT_NORMAL;
+ }
+ else if (strcmp("multiplexed", CMD_ARGV[2]) == 0)
+ {
+ portmode |= ETM_PORT_MUXED;
+ }
+ else if (strcmp("demultiplexed", CMD_ARGV[2]) == 0)
+ {
+ portmode |= ETM_PORT_DEMUXED;
+ }
+ else
+ {
+ command_print(CMD_CTX, "unsupported ETM port mode '%s', must be 'normal', 'multiplexed' or 'demultiplexed'", CMD_ARGV[2]);
+ return ERROR_FAIL;
+ }
+
+ if (strcmp("half", CMD_ARGV[3]) == 0)
+ {
+ portmode |= ETM_PORT_HALF_CLOCK;
+ }
+ else if (strcmp("full", CMD_ARGV[3]) == 0)
+ {
+ portmode |= ETM_PORT_FULL_CLOCK;
+ }
+ else
+ {
+ command_print(CMD_CTX, "unsupported ETM port clocking '%s', must be 'full' or 'half'", CMD_ARGV[3]);
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = calloc(1, sizeof(struct etm_context));
+ if (!etm_ctx) {
+ LOG_DEBUG("out of memory");
+ return ERROR_FAIL;
+ }
+
+ for (i = 0; etm_capture_drivers[i]; i++)
+ {
+ if (strcmp(CMD_ARGV[4], etm_capture_drivers[i]->name) == 0)
+ {
+ int retval = register_commands(CMD_CTX, NULL,
+ etm_capture_drivers[i]->commands);
+ if (ERROR_OK != retval)
+ {
+ free(etm_ctx);
+ return retval;
+ }
+
+ etm_ctx->capture_driver = etm_capture_drivers[i];
+
+ break;
+ }
+ }
+
+ if (!etm_capture_drivers[i])
+ {
+ /* no supported capture driver found, don't register an ETM */
+ free(etm_ctx);
+ LOG_ERROR("trace capture driver '%s' not found", CMD_ARGV[4]);
+ return ERROR_FAIL;
+ }
+
+ etm_ctx->target = target;
+ etm_ctx->trace_data = NULL;
+ etm_ctx->control = portmode;
+ etm_ctx->core_state = ARM_STATE_ARM;
+
+ arm->etm = etm_ctx;
+
+ return etm_register_user_commands(CMD_CTX);
+}
+
+COMMAND_HANDLER(handle_etm_info_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm;
+ struct reg *etm_sys_config_reg;
+ int max_port_size;
+ uint32_t config;
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm = arm->etm;
+ if (!etm)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ command_print(CMD_CTX, "ETM v%d.%d",
+ etm->bcd_vers >> 4, etm->bcd_vers & 0xf);
+ command_print(CMD_CTX, "pairs of address comparators: %i",
+ (int) (etm->config >> 0) & 0x0f);
+ command_print(CMD_CTX, "data comparators: %i",
+ (int) (etm->config >> 4) & 0x0f);
+ command_print(CMD_CTX, "memory map decoders: %i",
+ (int) (etm->config >> 8) & 0x1f);
+ command_print(CMD_CTX, "number of counters: %i",
+ (int) (etm->config >> 13) & 0x07);
+ command_print(CMD_CTX, "sequencer %spresent",
+ (int) (etm->config & (1 << 16)) ? "" : "not ");
+ command_print(CMD_CTX, "number of ext. inputs: %i",
+ (int) (etm->config >> 17) & 0x07);
+ command_print(CMD_CTX, "number of ext. outputs: %i",
+ (int) (etm->config >> 20) & 0x07);
+ command_print(CMD_CTX, "FIFO full %spresent",
+ (int) (etm->config & (1 << 23)) ? "" : "not ");
+ if (etm->bcd_vers < 0x20)
+ command_print(CMD_CTX, "protocol version: %i",
+ (int) (etm->config >> 28) & 0x07);
+ else {
+ command_print(CMD_CTX,
+ "coprocessor and memory access %ssupported",
+ (etm->config & (1 << 26)) ? "" : "not ");
+ command_print(CMD_CTX, "trace start/stop %spresent",
+ (etm->config & (1 << 26)) ? "" : "not ");
+ command_print(CMD_CTX, "number of context comparators: %i",
+ (int) (etm->config >> 24) & 0x03);
+ }
+
+ /* SYS_CONFIG isn't present before ETMv1.2 */
+ etm_sys_config_reg = etm_reg_lookup(etm, ETM_SYS_CONFIG);
+ if (!etm_sys_config_reg)
+ return ERROR_OK;
+
+ etm_get_reg(etm_sys_config_reg);
+ config = buf_get_u32(etm_sys_config_reg->value, 0, 32);
+
+ LOG_DEBUG("ETM SYS CONFIG %08x", (unsigned) config);
+
+ max_port_size = config & 0x7;
+ if (etm->bcd_vers >= 0x30)
+ max_port_size |= (config >> 6) & 0x08;
+ switch (max_port_size)
+ {
+ /* before ETMv3.0 */
+ case 0:
+ max_port_size = 4;
+ break;
+ case 1:
+ max_port_size = 8;
+ break;
+ case 2:
+ max_port_size = 16;
+ break;
+ /* ETMv3.0 and later*/
+ case 3:
+ max_port_size = 24;
+ break;
+ case 4:
+ max_port_size = 32;
+ break;
+ case 5:
+ max_port_size = 48;
+ break;
+ case 6:
+ max_port_size = 64;
+ break;
+ case 8:
+ max_port_size = 1;
+ break;
+ case 9:
+ max_port_size = 2;
+ break;
+ default:
+ LOG_ERROR("Illegal max_port_size");
+ return ERROR_FAIL;
+ }
+ command_print(CMD_CTX, "max. port size: %i", max_port_size);
+
+ if (etm->bcd_vers < 0x30) {
+ command_print(CMD_CTX, "half-rate clocking %ssupported",
+ (config & (1 << 3)) ? "" : "not ");
+ command_print(CMD_CTX, "full-rate clocking %ssupported",
+ (config & (1 << 4)) ? "" : "not ");
+ command_print(CMD_CTX, "normal trace format %ssupported",
+ (config & (1 << 5)) ? "" : "not ");
+ command_print(CMD_CTX, "multiplex trace format %ssupported",
+ (config & (1 << 6)) ? "" : "not ");
+ command_print(CMD_CTX, "demultiplex trace format %ssupported",
+ (config & (1 << 7)) ? "" : "not ");
+ } else {
+ /* REVISIT show which size and format are selected ... */
+ command_print(CMD_CTX, "current port size %ssupported",
+ (config & (1 << 10)) ? "" : "not ");
+ command_print(CMD_CTX, "current trace format %ssupported",
+ (config & (1 << 11)) ? "" : "not ");
+ }
+ if (etm->bcd_vers >= 0x21)
+ command_print(CMD_CTX, "fetch comparisons %ssupported",
+ (config & (1 << 17)) ? "not " : "");
+ command_print(CMD_CTX, "FIFO full %ssupported",
+ (config & (1 << 8)) ? "" : "not ");
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_status_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm;
+ trace_status_t trace_status;
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm = arm->etm;
+ if (!etm)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ /* ETM status */
+ if (etm->bcd_vers >= 0x11) {
+ struct reg *reg;
+
+ reg = etm_reg_lookup(etm, ETM_STATUS);
+ if (!reg)
+ return ERROR_FAIL;
+ if (etm_get_reg(reg) == ERROR_OK) {
+ unsigned s = buf_get_u32(reg->value, 0, reg->size);
+
+ command_print(CMD_CTX, "etm: %s%s%s%s",
+ /* bit(1) == progbit */
+ (etm->bcd_vers >= 0x12)
+ ? ((s & (1 << 1))
+ ? "disabled" : "enabled")
+ : "?",
+ ((s & (1 << 3)) && etm->bcd_vers >= 0x31)
+ ? " triggered" : "",
+ ((s & (1 << 2)) && etm->bcd_vers >= 0x12)
+ ? " start/stop" : "",
+ ((s & (1 << 0)) && etm->bcd_vers >= 0x11)
+ ? " untraced-overflow" : "");
+ } /* else ignore and try showing trace port status */
+ }
+
+ /* Trace Port Driver status */
+ trace_status = etm->capture_driver->status(etm);
+ if (trace_status == TRACE_IDLE)
+ {
+ command_print(CMD_CTX, "%s: idle", etm->capture_driver->name);
+ }
+ else
+ {
+ static char *completed = " completed";
+ static char *running = " is running";
+ static char *overflowed = ", overflowed";
+ static char *triggered = ", triggered";
+
+ command_print(CMD_CTX, "%s: trace collection%s%s%s",
+ etm->capture_driver->name,
+ (trace_status & TRACE_RUNNING) ? running : completed,
+ (trace_status & TRACE_OVERFLOWED) ? overflowed : "",
+ (trace_status & TRACE_TRIGGERED) ? triggered : "");
+
+ if (etm->trace_depth > 0)
+ {
+ command_print(CMD_CTX, "%i frames of trace data read",
+ (int)(etm->trace_depth));
+ }
+ }
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_image_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm_ctx;
+
+ if (CMD_ARGC < 1)
+ {
+ command_print(CMD_CTX, "usage: etm image <file> [base address] [type]");
+ return ERROR_FAIL;
+ }
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = arm->etm;
+ if (!etm_ctx)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ if (etm_ctx->image)
+ {
+ image_close(etm_ctx->image);
+ free(etm_ctx->image);
+ command_print(CMD_CTX, "previously loaded image found and closed");
+ }
+
+ etm_ctx->image = malloc(sizeof(struct image));
+ etm_ctx->image->base_address_set = 0;
+ etm_ctx->image->start_address_set = 0;
+
+ /* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
+ if (CMD_ARGC >= 2)
+ {
+ etm_ctx->image->base_address_set = 1;
+ COMMAND_PARSE_NUMBER(int, CMD_ARGV[1], etm_ctx->image->base_address);
+ }
+ else
+ {
+ etm_ctx->image->base_address_set = 0;
+ }
+
+ if (image_open(etm_ctx->image, CMD_ARGV[0], (CMD_ARGC >= 3) ? CMD_ARGV[2] : NULL) != ERROR_OK)
+ {
+ free(etm_ctx->image);
+ etm_ctx->image = NULL;
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_dump_command)
+{
+ struct fileio file;
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm_ctx;
+ uint32_t i;
+
+ if (CMD_ARGC != 1)
+ {
+ command_print(CMD_CTX, "usage: etm dump <file>");
+ return ERROR_FAIL;
+ }
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = arm->etm;
+ if (!etm_ctx)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ if (etm_ctx->capture_driver->status == TRACE_IDLE)
+ {
+ command_print(CMD_CTX, "trace capture wasn't enabled, no trace data captured");
+ return ERROR_OK;
+ }
+
+ if (etm_ctx->capture_driver->status(etm_ctx) & TRACE_RUNNING)
+ {
+ /* TODO: if on-the-fly capture is to be supported, this needs to be changed */
+ command_print(CMD_CTX, "trace capture not completed");
+ return ERROR_FAIL;
+ }
+
+ /* read the trace data if it wasn't read already */
+ if (etm_ctx->trace_depth == 0)
+ etm_ctx->capture_driver->read_trace(etm_ctx);
+
+ if (fileio_open(&file, CMD_ARGV[0], FILEIO_WRITE, FILEIO_BINARY) != ERROR_OK)
+ {
+ return ERROR_FAIL;
+ }
+
+ fileio_write_u32(&file, etm_ctx->capture_status);
+ fileio_write_u32(&file, etm_ctx->control);
+ fileio_write_u32(&file, etm_ctx->trace_depth);
+
+ for (i = 0; i < etm_ctx->trace_depth; i++)
+ {
+ fileio_write_u32(&file, etm_ctx->trace_data[i].pipestat);
+ fileio_write_u32(&file, etm_ctx->trace_data[i].packet);
+ fileio_write_u32(&file, etm_ctx->trace_data[i].flags);
+ }
+
+ fileio_close(&file);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_load_command)
+{
+ struct fileio file;
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm_ctx;
+ uint32_t i;
+
+ if (CMD_ARGC != 1)
+ {
+ command_print(CMD_CTX, "usage: etm load <file>");
+ return ERROR_FAIL;
+ }
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = arm->etm;
+ if (!etm_ctx)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ if (etm_ctx->capture_driver->status(etm_ctx) & TRACE_RUNNING)
+ {
+ command_print(CMD_CTX, "trace capture running, stop first");
+ return ERROR_FAIL;
+ }
+
+ if (fileio_open(&file, CMD_ARGV[0], FILEIO_READ, FILEIO_BINARY) != ERROR_OK)
+ {
+ return ERROR_FAIL;
+ }
+
+ if (file.size % 4)
+ {
+ command_print(CMD_CTX, "size isn't a multiple of 4, no valid trace data");
+ fileio_close(&file);
+ return ERROR_FAIL;
+ }
+
+ if (etm_ctx->trace_depth > 0)
+ {
+ free(etm_ctx->trace_data);
+ etm_ctx->trace_data = NULL;
+ }
+
+ {
+ uint32_t tmp;
+ fileio_read_u32(&file, &tmp); etm_ctx->capture_status = tmp;
+ fileio_read_u32(&file, &tmp); etm_ctx->control = tmp;
+ fileio_read_u32(&file, &etm_ctx->trace_depth);
+ }
+ etm_ctx->trace_data = malloc(sizeof(struct etmv1_trace_data) * etm_ctx->trace_depth);
+ if (etm_ctx->trace_data == NULL)
+ {
+ command_print(CMD_CTX, "not enough memory to perform operation");
+ fileio_close(&file);
+ return ERROR_FAIL;
+ }
+
+ for (i = 0; i < etm_ctx->trace_depth; i++)
+ {
+ uint32_t pipestat, packet, flags;
+ fileio_read_u32(&file, &pipestat);
+ fileio_read_u32(&file, &packet);
+ fileio_read_u32(&file, &flags);
+ etm_ctx->trace_data[i].pipestat = pipestat & 0xff;
+ etm_ctx->trace_data[i].packet = packet & 0xffff;
+ etm_ctx->trace_data[i].flags = flags;
+ }
+
+ fileio_close(&file);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_start_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm_ctx;
+ struct reg *etm_ctrl_reg;
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = arm->etm;
+ if (!etm_ctx)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ /* invalidate old tracing data */
+ etm_ctx->capture_status = TRACE_IDLE;
+ if (etm_ctx->trace_depth > 0)
+ {
+ free(etm_ctx->trace_data);
+ etm_ctx->trace_data = NULL;
+ }
+ etm_ctx->trace_depth = 0;
+
+ etm_ctrl_reg = etm_reg_lookup(etm_ctx, ETM_CTRL);
+ if (!etm_ctrl_reg)
+ return ERROR_FAIL;
+
+ etm_get_reg(etm_ctrl_reg);
+
+ /* Clear programming bit (10), set port selection bit (11) */
+ buf_set_u32(etm_ctrl_reg->value, 10, 2, 0x2);
+
+ etm_store_reg(etm_ctrl_reg);
+ jtag_execute_queue();
+
+ etm_ctx->capture_driver->start_capture(etm_ctx);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_stop_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm_ctx;
+ struct reg *etm_ctrl_reg;
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = arm->etm;
+ if (!etm_ctx)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ etm_ctrl_reg = etm_reg_lookup(etm_ctx, ETM_CTRL);
+ if (!etm_ctrl_reg)
+ return ERROR_FAIL;
+
+ etm_get_reg(etm_ctrl_reg);
+
+ /* Set programming bit (10), clear port selection bit (11) */
+ buf_set_u32(etm_ctrl_reg->value, 10, 2, 0x1);
+
+ etm_store_reg(etm_ctrl_reg);
+ jtag_execute_queue();
+
+ etm_ctx->capture_driver->stop_capture(etm_ctx);
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_trigger_debug_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm;
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: %s isn't an ARM",
+ target_name(target));
+ return ERROR_FAIL;
+ }
+
+ etm = arm->etm;
+ if (!etm)
+ {
+ command_print(CMD_CTX, "ETM: no ETM configured for %s",
+ target_name(target));
+ return ERROR_FAIL;
+ }
+
+ if (CMD_ARGC == 1) {
+ struct reg *etm_ctrl_reg;
+ bool dbgrq;
+
+ etm_ctrl_reg = etm_reg_lookup(etm, ETM_CTRL);
+ if (!etm_ctrl_reg)
+ return ERROR_FAIL;
+
+ COMMAND_PARSE_ENABLE(CMD_ARGV[0], dbgrq);
+ if (dbgrq)
+ etm->control |= ETM_CTRL_DBGRQ;
+ else
+ etm->control &= ~ETM_CTRL_DBGRQ;
+
+ /* etm->control will be written to hardware
+ * the next time an "etm start" is issued.
+ */
+ buf_set_u32(etm_ctrl_reg->value, 0, 32, etm->control);
+ }
+
+ command_print(CMD_CTX, "ETM: %s debug halt",
+ (etm->control & ETM_CTRL_DBGRQ)
+ ? "triggers"
+ : "does not trigger");
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_etm_analyze_command)
+{
+ struct target *target;
+ struct arm *arm;
+ struct etm_context *etm_ctx;
+ int retval;
+
+ target = get_current_target(CMD_CTX);
+ arm = target_to_arm(target);
+ if (!is_arm(arm))
+ {
+ command_print(CMD_CTX, "ETM: current target isn't an ARM");
+ return ERROR_FAIL;
+ }
+
+ etm_ctx = arm->etm;
+ if (!etm_ctx)
+ {
+ command_print(CMD_CTX, "current target doesn't have an ETM configured");
+ return ERROR_FAIL;
+ }
+
+ if ((retval = etmv1_analyze_trace(etm_ctx, CMD_CTX)) != ERROR_OK)
+ {
+ switch (retval)
+ {
+ case ERROR_ETM_ANALYSIS_FAILED:
+ command_print(CMD_CTX, "further analysis failed (corrupted trace data or just end of data");
+ break;
+ case ERROR_TRACE_INSTRUCTION_UNAVAILABLE:
+ command_print(CMD_CTX, "no instruction for current address available, analysis aborted");
+ break;
+ case ERROR_TRACE_IMAGE_UNAVAILABLE:
+ command_print(CMD_CTX, "no image available for trace analysis");
+ break;
+ default:
+ command_print(CMD_CTX, "unknown error: %i", retval);
+ }
+ }
+
+ return retval;
+}
+
+static const struct command_registration etm_config_command_handlers[] = {
+ {
+ /* NOTE: with ADIv5, ETMs are accessed by DAP operations,
+ * possibly over SWD, not JTAG scanchain 6 of 'target'.
+ *
+ * Also, these parameters don't match ETM v3+ modules...
+ */
+ .name = "config",
+ .handler = handle_etm_config_command,
+ .mode = COMMAND_CONFIG,
+ .help = "Set up ETM output port.",
+ .usage = "target port_width port_mode clocking capture_driver",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+const struct command_registration etm_command_handlers[] = {
+ {
+ .name = "etm",
+ .mode = COMMAND_ANY,
+ .help = "Emebdded Trace Macrocell command group",
+ .chain = etm_config_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static const struct command_registration etm_exec_command_handlers[] = {
+ {
+ .name = "tracemode",
+ .handler = handle_etm_tracemode_command,
+ .mode = COMMAND_EXEC,
+ .help = "configure/display trace mode",
+ .usage = "('none'|'data'|'address'|'all') "
+ "context_id_bits "
+ "['enable'|'disable'] "
+ "['enable'|'disable']",
+ },
+ {
+ .name = "info",
+ .handler = handle_etm_info_command,
+ .mode = COMMAND_EXEC,
+ .help = "display info about the current target's ETM",
+ },
+ {
+ .name = "status",
+ .handler = handle_etm_status_command,
+ .mode = COMMAND_EXEC,
+ .help = "display current target's ETM status",
+ },
+ {
+ .name = "start",
+ .handler = handle_etm_start_command,
+ .mode = COMMAND_EXEC,
+ .help = "start ETM trace collection",
+ },
+ {
+ .name = "stop",
+ .handler = handle_etm_stop_command,
+ .mode = COMMAND_EXEC,
+ .help = "stop ETM trace collection",
+ },
+ {
+ .name = "trigger_debug",
+ .handler = handle_etm_trigger_debug_command,
+ .mode = COMMAND_EXEC,
+ .help = "enable/disable debug entry on trigger",
+ .usage = "['enable'|'disable']",
+ },
+ {
+ .name = "analyze",
+ .handler = handle_etm_analyze_command,
+ .mode = COMMAND_EXEC,
+ .help = "analyze collected ETM trace",
+ },
+ {
+ .name = "image",
+ .handler = handle_etm_image_command,
+ .mode = COMMAND_EXEC,
+ .help = "load image from file with optional offset",
+ .usage = "filename [offset]",
+ },
+ {
+ .name = "dump",
+ .handler = handle_etm_dump_command,
+ .mode = COMMAND_EXEC,
+ .help = "dump captured trace data to file",
+ .usage = "filename",
+ },
+ {
+ .name = "load",
+ .handler = handle_etm_load_command,
+ .mode = COMMAND_EXEC,
+ .help = "load trace data for analysis <file>",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static int etm_register_user_commands(struct command_context *cmd_ctx)
+{
+ struct command *etm_cmd = command_find_in_context(cmd_ctx, "etm");
+ return register_commands(cmd_ctx, etm_cmd, etm_exec_command_handlers);
+}