whitespace fixes

[openocd] / src / target / target / str730.cfg

diff --git a/src/target/target/str730.cfg b/src/target/target/str730.cfg
index 612704819d1bbc94e0fe2099ff711f7b76c00c4c..5d01ec71c1ad05d4ddb2c6605c13f4cb7877ce3f 100644 (file)
--- a/src/target/target/str730.cfg
+++ b/src/target/target/str730.cfg
@@ -1,31 +1,45 @@
 #STR730 CPU
 
-jtag_khz 10, 3000
-
-#use combined on interfaces or targets that can\92t set TRST/SRST separately
+jtag_khz 3000
+
+if { [info exists CHIPNAME] } {        
+   set  _CHIPNAME $CHIPNAME    
+} else {        
+   set  _CHIPNAME str730
+}
+
+if { [info exists ENDIAN] } {  
+   set  _ENDIAN $ENDIAN    
+} else {        
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID] } {        
+   set  _CPUTAPID $CPUTAPID    
+} else {        
+   set  _CPUTAPID 0x3f0f0f0f
+}
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
 #reset_config trst_and_srst srst_pulls_trst
 reset_config trst_and_srst srst_pulls_trst
 
 #jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID
 
 #jtag nTRST and nSRST delay
 jtag_nsrst_delay 500
 jtag_ntrst_delay 500
 
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
-
-run_and_halt_time 0 30
-
-target_script 0 gdb_program_config event/str730_program.script
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+$_TARGETNAME configure -event reset-start { jtag_khz 10 }
+$_TARGETNAME configure -event reset-init { jtag_khz 3000 }
+$_TARGETNAME configure -event gdb-flash-erase-start {
+       flash protect 0 0 7 off
+}
 
-working_area 0 0x40000000 0x4000 nobackup
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank str7x 0x20000000 0x00040000 0 0 0 STR3x