memset(&field, 0, sizeof field);
field.num_bits = tap->ir_length;
field.out_value = scratch;
- buf_set_u32(field.out_value, 0, field.num_bits, new_instr);
+ buf_set_u32(scratch, 0, field.num_bits, new_instr);
jtag_add_ir_scan(tap, &field, end_state);
}
uint8_t field2_check_value = 0x0;
uint8_t field2_check_mask = 0x1;
- jtag_set_end_state(TAP_DRPAUSE);
xscale_jtag_set_instr(target->tap,
XSCALE_SELDCSR << xscale->xscale_variant,
TAP_DRPAUSE);
fields[1].out_value = xscale->reg_cache->reg_list[XSCALE_DCSR].value;
fields[1].in_value = NULL;
- jtag_set_end_state(TAP_IDLE);
-
jtag_add_dr_scan(target->tap, 3, fields, TAP_DRPAUSE);
/* DANGER!!! this must be here. It will make sure that the arguments
fields[2].check_value = &field2_check_value;
fields[2].check_mask = &field2_check_mask;
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
XSCALE_DBGTX << xscale->xscale_variant,
TAP_IDLE);
uint8_t field2_check_value = 0x0;
uint8_t field2_check_mask = 0x1;
- jtag_set_end_state(TAP_IDLE);
-
xscale_jtag_set_instr(target->tap,
XSCALE_DBGTX << xscale->xscale_variant,
TAP_IDLE);
uint8_t field2_check_value = 0x0;
uint8_t field2_check_mask = 0x1;
- jtag_set_end_state(TAP_IDLE);
-
xscale_jtag_set_instr(target->tap,
XSCALE_DBGRX << xscale->xscale_variant,
TAP_IDLE);
int retval;
int done_count = 0;
- jtag_set_end_state(TAP_IDLE);
-
xscale_jtag_set_instr(target->tap,
XSCALE_DBGRX << xscale->xscale_variant,
TAP_IDLE);
if (ext_dbg_brk != -1)
xscale->external_debug_break = ext_dbg_brk;
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
XSCALE_SELDCSR << xscale->xscale_variant,
TAP_IDLE);
LOG_DEBUG("loading miniIC at 0x%8.8" PRIx32 "", va);
/* LDIC into IR */
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
XSCALE_LDIC << xscale->xscale_variant,
TAP_IDLE);
uint8_t cmd;
struct scan_field fields[2];
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
XSCALE_LDIC << xscale->xscale_variant,
TAP_IDLE);
if (breakpoint != NULL)
{
uint32_t next_pc;
+ int saved_trace_buffer_enabled;
/* there's a breakpoint at the current PC, we have to step over it */
LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32 "", breakpoint->address);
/* restore banked registers */
retval = xscale_restore_banked(target);
- /* send resume request (command 0x30 or 0x31)
- * clean the trace buffer if it is to be enabled (0x62) */
- if (xscale->trace.buffer_enabled)
- {
- xscale_send_u32(target, 0x62);
- xscale_send_u32(target, 0x31);
- }
- else
- xscale_send_u32(target, 0x30);
+ /* send resume request */
+ xscale_send_u32(target, 0x30);
/* send CPSR */
xscale_send_u32(target,
LOG_DEBUG("writing PC with value 0x%8.8" PRIx32,
buf_get_u32(armv4_5->pc->value, 0, 32));
+ /* disable trace data collection in xscale_debug_entry() */
+ saved_trace_buffer_enabled = xscale->trace.buffer_enabled;
+ xscale->trace.buffer_enabled = 0;
+
/* wait for and process debug entry */
xscale_debug_entry(target);
+ /* re-enable trace buffer, if enabled previously */
+ xscale->trace.buffer_enabled = saved_trace_buffer_enabled;
+
LOG_DEBUG("disable single-step");
xscale_disable_single_step(target);
* clean the trace buffer if it is to be enabled (0x62) */
if (xscale->trace.buffer_enabled)
{
+ /* if trace buffer is set to 'fill' mode, save starting pc */
+ if (xscale->trace.buffer_fill > 0)
+ {
+ xscale->trace.pc_ok = 1;
+ xscale->trace.current_pc = buf_get_u32(armv4_5->pc->value, 0, 32);
+ }
xscale_send_u32(target, 0x62);
xscale_send_u32(target, 0x31);
}
/* select DCSR instruction (set endstate to R-T-I to ensure we don't
* end up in T-L-R, which would reset JTAG
*/
- jtag_set_end_state(TAP_IDLE);
xscale_jtag_set_instr(target->tap,
XSCALE_SELDCSR << xscale->xscale_variant,
TAP_IDLE);
{
return retval;
}
- /* write the original instruction in target endianness (arm7_9->arm_bkpt is host endian) */
+ /* write the bkpt instruction in target endianness (arm7_9->arm_bkpt is host endian) */
if ((retval = target_write_u32(target, breakpoint->address, xscale->arm_bkpt)) != ERROR_OK)
{
return retval;
{
return retval;
}
- /* write the original instruction in target endianness (arm7_9->arm_bkpt is host endian) */
+ /* write the bkpt instruction in target endianness (arm7_9->arm_bkpt is host endian) */
if ((retval = target_write_u32(target, breakpoint->address, xscale->thumb_bkpt)) != ERROR_OK)
{
return retval;
}
}
breakpoint->set = 1;
+
+ xscale_send_u32(target, 0x50); /* clean dcache */
+ xscale_send_u32(target, xscale->cache_clean_address);
+ xscale_send_u32(target, 0x51); /* invalidate dcache */
+ xscale_send_u32(target, 0x52); /* invalidate icache and flush fetch buffers */
}
return ERROR_OK;
}
}
breakpoint->set = 0;
+
+ xscale_send_u32(target, 0x50); /* clean dcache */
+ xscale_send_u32(target, xscale->cache_clean_address);
+ xscale_send_u32(target, 0x51); /* invalidate dcache */
+ xscale_send_u32(target, 0x52); /* invalidate icache and flush fetch buffers */
}
return ERROR_OK;