Remove jtag_rclk from target configs

[openocd] / tcl / target / imx6.cfg

diff --git a/tcl/target/imx6.cfg b/tcl/target/imx6.cfg
index 292b1148e49fc8f64c4c8af0d65736ca2d9ee4cb..622261fe6cfd12e471df8f340e2009a1281eabbc 100644 (file)
--- a/tcl/target/imx6.cfg
+++ b/tcl/target/imx6.cfg
@@ -26,9 +26,11 @@ if { [info exists SJC_TAPID] } {
         set _SJC_TAPID 0x0191c01d
 }
 set _SJC_TAPID2 0x2191c01d
+set _SJC_TAPID3 0x2191e01d
 
 jtag newtap $_CHIPNAME sjc -irlen 5 -ircapture 0x01 -irmask 0x1f \
-        -expected-id $_SJC_TAPID -expected-id $_SJC_TAPID2
+        -expected-id $_SJC_TAPID -expected-id $_SJC_TAPID2 \
+        -expected-id $_SJC_TAPID3
 
 # GDB target: Cortex-A9, using DAP, configuring only one core
 # Base addresses of cores:
@@ -49,8 +51,8 @@ proc imx6_dbginit {target} {
 }
 
 # Slow speed to be sure it will work
-jtag_rclk 1000
-$_TARGETNAME configure -event reset-start { jtag_rclk 1000 }
+adapter_khz 1000
+$_TARGETNAME configure -event reset-start { adapter_khz 1000 }
 
 $_TARGETNAME configure -event reset-assert-post "imx6_dbginit $_TARGETNAME"
 $_TARGETNAME configure -event gdb-attach { halt }