Rick Altherr <kc8apf@kc8apf.net> - update syntax

[openocd] / testing / examples / STR710Test / prj / str710_jtagkey.cfg

diff --git a/testing/examples/STR710Test/prj/str710_jtagkey.cfg b/testing/examples/STR710Test/prj/str710_jtagkey.cfg
index b5b8bfb659dbe1878216110638df655bc1191dbf..da4c243897b6ceaf9a22861350b15838a321986c 100644 (file)
--- a/testing/examples/STR710Test/prj/str710_jtagkey.cfg
+++ b/testing/examples/STR710Test/prj/str710_jtagkey.cfg
@@ -1,40 +1,37 @@
-#daemon configuration\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-# tell gdb our flash memory map\r
-# and enable flash programming\r
-gdb_memory_map enable\r
-gdb_flash_program enable\r
-\r
-#interface\r
-interface ft2232\r
-ft2232_device_desc "Amontec JTAGkey A"\r
-ft2232_layout jtagkey\r
-ft2232_vid_pid 0x0403 0xcff8\r
-jtag_speed 0\r
-\r
-#use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config trst_and_srst srst_pulls_trst\r
-\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 4 0x1 0xf 0xe\r
-\r
-#target configuration\r
-daemon_startup reset\r
-\r
-#target <type> <startup mode>\r
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
-target arm7tdmi little run_and_halt 0 arm7tdmi\r
-run_and_halt_time 0 30\r
-\r
-target_script 0 gdb_program_config .\prj\str710_program.script\r
-\r
-working_area 0 0x2000C000 0x4000 nobackup\r
-\r
-#flash bank str7x <base> <size> 0 0 <target#> <variant>\r
-flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x\r
-\r
-# For more information about the configuration files, take a look at:\r
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger\r
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+target create target0 arm7tdmi -endian little -chain-position 0 -variant arm7tdmi
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x2000C000 -work-area-size 0x4000 -work-area-backup false
+
+target_script 0 gdb_program_config .\prj\str710_program.script
+
+#flash bank str7x <base> <size> 0 0 <target#> <variant>
+flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+
+init
+reset halt