dtoc: Increase code coverage to 100%

[u-boot] / tools / env / fw_env.config

diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config
index 0fe37c959a36f418d46bfb2159a169b3681b1741..053895a2c07b23891e098c2370066204f04b8ea1 100644 (file)
--- a/tools/env/fw_env.config
+++ b/tools/env/fw_env.config
@@ -1,11 +1,38 @@
-# Configuration file for fw_(printenv/saveenv) utility.
-# Up to two entries are valid, in this case the redundand
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
 # environment sector is assumed present.
-# Notice, that the "Number of sectors" is ignored on NOR.
+# Notice, that the "Number of sectors" is not required on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is omitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+# Device offset must be prefixed with 0x to be parsed as a hexadecimal value.
 
+# NOR example
 # MTD device name      Device offset   Env. size       Flash sector size       Number of sectors
 /dev/mtd1              0x0000          0x4000          0x4000
 /dev/mtd2              0x0000          0x4000          0x4000
 
+# MTD SPI-dataflash example
+# MTD device name      Device offset   Env. size       Flash sector size       Number of sectors
+#/dev/mtd5             0x4200          0x4200
+#/dev/mtd6             0x4200          0x4200
+
 # NAND example
 #/dev/mtd0             0x4000          0x4000          0x20000                 2
+
+# On a block device a negative offset is treated as a backwards offset from the
+# end of the device/partition, rather than a forwards offset from the start.
+
+# Block device example
+#/dev/mmcblk0          0xc0000         0x20000
+#/dev/mmcblk0          -0x20000        0x20000
+
+# VFAT example
+#/boot/uboot.env       0x0000          0x4000
+
+# UBI volume
+#/dev/ubi0_0           0x0             0x1f000         0x1f000
+#/dev/ubi0_1           0x0             0x1f000         0x1f000
+
+# UBI volume by name
+#/dev/ubi0:env         0x0             0x1f000         0x1f000
+#/dev/ubi0:env-redund  0x0             0x1f000         0x1f000