]> git.sur5r.net Git - u-boot/commit
armv8: Add workaround for USB erratum A-009798
authorRan Wang <ran.wang_1@nxp.com>
Mon, 4 Sep 2017 10:46:49 +0000 (18:46 +0800)
committerYork Sun <york.sun@nxp.com>
Mon, 11 Sep 2017 15:01:06 +0000 (08:01 -0700)
commit2a8a35395868dd1b610ff064fcdb4906321594fc
tree50629c399ee990b38680c63ec4326cc9aaec64ec
parent2ab1553f08b1cb4a76764b1a67f75f77554860e3
armv8: Add workaround for USB erratum A-009798

The default setting for USB High Speed Squelch Threshold results
in a threshold close to or lower than 100mV. This leads to Receiver
Compliance test failure for a 100mV threshold.

Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE
to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
[YS: Reordered Kconfig options]
Reviewed-by: York Sun <york.sun@nxp.com>
arch/arm/cpu/armv8/fsl-layerscape/Kconfig
arch/arm/cpu/armv8/fsl-layerscape/soc.c
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h