]> git.sur5r.net Git - u-boot/commit
powerpc/t1024qds: Add T1024 QDS board support
authorShengzhou Liu <Shengzhou.Liu@freescale.com>
Mon, 24 Nov 2014 09:11:55 +0000 (17:11 +0800)
committerYork Sun <yorksun@freescale.com>
Fri, 5 Dec 2014 16:06:15 +0000 (08:06 -0800)
commitaba800481879e3674b55c95d63bcbd8aff1cb204
tree82e31d803fc7dc8d4aaa0aa3c50eb736d4cbadd1
parentf605079041079cb4e84693110e26086f8d1a8bcd
powerpc/t1024qds: Add T1024 QDS board support

T1024QDS is a high-performance computing evaluation, development and
test platform for T1024 QorIQ Power Architecture processor.

T1024QDS board Overview
-----------------------
- T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz
- CoreNet fabric supporting coherent and noncoherent transactions with
  prioritization and bandwidth allocation
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC
- Ethernet interfaces:
  - Two 10M/100M/1G RGMII ports on-board
  - Three 1G/2.5Gbps SGMII ports
  - Four 1Gbps QSGMII ports
  - one 10Gbps XFI or 10Base-KR interface
- SerDes: 4 lanes up to 10.3125GHz Supporting SGMII/QSGMII, XFI, PCIe, SATA and Aurora
- PCIe: Three PCI Express controllers with five PCIe slots.
- IFC: 128MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- Video: DIU supports video up to 1280x1024x32 bpp.
  - Chrontel CH7201 for HDMI connection.
  - TI DS90C387R for direct LCD connection.
  - Raw (not encoded) video connector for testing or other encoders.
- QUICC Engine block
  - 32-bit RISC controller for flexible support of the communications peripherals
  - Serial DMA channel for receive and transmit on all serial channels
  - Two universal communication controllers, supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- eSPI: Three SPI flash devices.
- SATA: one SATA 2.O.
- USB: Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- eSDHC: Support SD, SDHC, SDXC and MMC/eMMC.
- I2C: Four I2C controllers.
- UART: Two UART on board.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
[York Sun: Fix ft_board_setup() type, fix MAINTAINERS for SECURE_BOOT
   Fix Kconfig by adding SUPPORT_SPL]
Reviewed-by: York Sun <yorksun@freescale.com>
22 files changed:
arch/powerpc/cpu/mpc85xx/Kconfig
board/freescale/t102xqds/Kconfig [new file with mode: 0644]
board/freescale/t102xqds/MAINTAINERS [new file with mode: 0644]
board/freescale/t102xqds/Makefile [new file with mode: 0644]
board/freescale/t102xqds/README [new file with mode: 0644]
board/freescale/t102xqds/ddr.c [new file with mode: 0644]
board/freescale/t102xqds/eth_t102xqds.c [new file with mode: 0644]
board/freescale/t102xqds/law.c [new file with mode: 0644]
board/freescale/t102xqds/pci.c [new file with mode: 0644]
board/freescale/t102xqds/spl.c [new file with mode: 0644]
board/freescale/t102xqds/t1024_pbi.cfg [new file with mode: 0644]
board/freescale/t102xqds/t1024_rcw.cfg [new file with mode: 0644]
board/freescale/t102xqds/t102xqds.c [new file with mode: 0644]
board/freescale/t102xqds/t102xqds.h [new file with mode: 0644]
board/freescale/t102xqds/t102xqds_qixis.h [new file with mode: 0644]
board/freescale/t102xqds/tlb.c [new file with mode: 0644]
configs/T1024QDS_D4_SECURE_BOOT_defconfig [new file with mode: 0644]
configs/T1024QDS_NAND_defconfig [new file with mode: 0644]
configs/T1024QDS_SDCARD_defconfig [new file with mode: 0644]
configs/T1024QDS_SECURE_BOOT_defconfig [new file with mode: 0644]
configs/T1024QDS_SPIFLASH_defconfig [new file with mode: 0644]
include/configs/T102xQDS.h [new file with mode: 0644]