-
-CONFIG_SYS_CSx_BASE -- defines the base address of chip select x
-CONFIG_SYS_CSx_SIZE -- defines the memory size (address range) of chip select x
-CONFIG_SYS_CSx_WIDTH -- defines the bus with of chip select x
-CONFIG_SYS_CSx_RO -- if set to 0 chip select x is read/wirte
- else chipselct is read only
-CONFIG_SYS_CSx_WS -- defines the number of wait states of chip select x
-
-CONFIG_SYS_PxDDR -- defines the contents of the Data Direction Registers
-CONFIG_SYS_PxDAT -- defines the contents of the Data Registers
-CONFIG_SYS_PXCNT -- defines the contents of the Port Configuration Registers
-
-CONFIG_SYS_PxPAR -- defines the function of ports
-
-
-5. COMPILER
------------
-To create U-Boot the gcc-2.95.3 compiler set (m68k-elf-20030314) from uClinux.org was used.
-You can download it from: http://www.uclinux.org/pub/uClinux/m68k-elf-tools/
+CONFIG_SYS_CSx_BASE
+ -- defines the base address of chip select x
+CONFIG_SYS_CSx_SIZE
+ -- defines the memory size (address range) of chip select x
+CONFIG_SYS_CSx_WIDTH
+ -- defines the bus with of chip select x
+CONFIG_SYS_CSx_MASK
+ -- defines the mask for the related chip select x
+CONFIG_SYS_CSx_RO
+ -- if set to 0 chip select x is read/write else chip select
+ is read only
+CONFIG_SYS_CSx_WS
+ -- defines the number of wait states of chip select x
+CONFIG_SYS_CACHE_ICACR
+CONFIG_SYS_CACHE_DCACR
+CONFIG_SYS_CACHE_ACRX
+ -- cache-related registers config
+CONFIG_SYS_SDRAM_BASE
+CONFIG_SYS_SDRAM_SIZE
+CONFIG_SYS_SDRAM_BASEX
+CONFIG_SYS_SDRAM_CFG1
+CONFIG_SYS_SDRAM_CFG2
+CONFIG_SYS_SDRAM_CTRL
+CONFIG_SYS_SDRAM_MODE
+CONFIG_SYS_SDRAM_EMOD
+ -- SDRAM config for SDRAM controller-specific registers, please
+ see arch/m68k/cpu/<specific_cpu>/start.S files to see how
+ these options are used.
+CONFIG_MCFUART
+ -- defines enabling of ColdFire UART driver
+CONFIG_SYS_UART_PORT
+ -- defines the UART port to be used (only a single UART can be
+ actually enabled)
+CONFIG_SYS_SBFHDR_SIZE
+ -- size of the prepended SBF header, if any