#error Must define number of SPARC register windows, default is 8
#endif
+/* Macros to load address into a register. Uses GOT table for PIC */
+#ifdef __PIC__
+
+#define SPARC_PIC_THUNK_CALL(reg) \
+ sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
+ call __sparc_get_pc_thunk.reg; \
+ add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
+
+#define SPARC_LOAD_ADDRESS(sym, got, reg) \
+ sethi %gdop_hix22(sym), %##reg; \
+ xor %##reg, %gdop_lox10(sym), %##reg; \
+ ld [%##got + %##reg], %##reg, %gdop(sym);
+
+#else
+
+#define SPARC_PIC_THUNK_CALL(reg)
+#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
+ set sym, %##reg;
+
+#endif
+
#define STACK_ALIGN 8
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
srl %g2, 30, %g2
andcc %g2, 3, %g6
bne,a leon2_init_wim
- mov %g0, %asr16 ! clear err_reg
+ mov %g0, %asr16 ! clear err_reg
leon2_init_wim:
set WIM_INIT, %g3
cpu_init_unreloc:
call cpu_init_f
- nop
+ nop
/* un relocated start address of monitor */
#define TEXT_START _text
/* un relocated end address of monitor */
#define DATA_END __init_end
+ SPARC_PIC_THUNK_CALL(l7)
reloc:
- set TEXT_START,%g2
- set DATA_END,%g3
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
+ SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
set CONFIG_SYS_RELOC_MONITOR_BASE,%g4
reloc_loop:
ldd [%g2],%l0
inc 16,%g2
subcc %g3,%g2,%g0
bne reloc_loop
- inc 16,%g4
+ inc 16,%g4
clr %l0
clr %l1
clr_bss:
/* clear bss area (the relocated) */
- set __bss_start,%g2
- set __bss_end,%g3
+ SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
sub %g3,%g2,%g3
add %g3,%g4,%g3
clr %g1 /* std %g0 uses g0 and g1 */
inc 16,%g4
cmp %g3,%g4
bne clr_bss_16
- nop
+ nop
/* add offsets to GOT table */
fixup_got:
- set __got_start,%g4
- set __got_end,%g3
+ SPARC_LOAD_ADDRESS(__got_start, l7, g4)
+ SPARC_LOAD_ADDRESS(__got_end, l7, g3)
/*
* new got offset = (old GOT-PTR (read with ld) -
* CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) +
* Destination Address (from define)
*/
set CONFIG_SYS_RELOC_MONITOR_BASE,%g2
- set TEXT_START, %g1
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g1)
add %g4,%g2,%g4
sub %g4,%g1,%g4
add %g3,%g2,%g3
inc 4,%g4
cmp %g3,%g4
bne got_loop
- nop
+ nop
prom_relocate:
- set __prom_start, %g2
- set __prom_end, %g3
+ SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
set CONFIG_SYS_PROM_OFFSET, %g4
prom_relocate_loop:
inc 16,%g2
subcc %g3,%g2,%g0
bne prom_relocate_loop
- inc 16,%g4
+ inc 16,%g4
/* Trap table has been moved, lets tell CPU about
* the new trap table address
nop
/* Call relocated init functions */
jump:
- set cpu_init_f2,%o1
+ SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
- set board_init_f,%o1
+ SPARC_LOAD_ADDRESS(board_init_f, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
dead: ta 0 ! if call returns...
nop
#error Must define number of SPARC register windows, default is 8
#endif
+/* Macros to load address into a register. Uses GOT table for PIC */
+#ifdef __PIC__
+
+#define SPARC_PIC_THUNK_CALL(reg) \
+ sethi %pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
+ call __sparc_get_pc_thunk.reg; \
+ add %##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
+
+#define SPARC_LOAD_ADDRESS(sym, got, reg) \
+ sethi %gdop_hix22(sym), %##reg; \
+ xor %##reg, %gdop_lox10(sym), %##reg; \
+ ld [%##got + %##reg], %##reg, %gdop(sym);
+
+#else
+
+#define SPARC_PIC_THUNK_CALL(reg)
+#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
+ set sym, %##reg;
+
+#endif
+
#define STACK_ALIGN 8
#define SA(X) (((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
bge clear_window
save
-wininit:
+wiminit:
set WIM_INIT, %g3
mov %g3, %wim
cpu_init_unreloc:
call cpu_init_f
- nop
+ nop
/* un relocated start address of monitor */
#define TEXT_START _text
/* un relocated end address of monitor */
#define DATA_END __init_end
+ SPARC_PIC_THUNK_CALL(l7)
reloc:
- set TEXT_START,%g2
- set DATA_END,%g3
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
+ SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
set CONFIG_SYS_RELOC_MONITOR_BASE,%g4
reloc_loop:
ldd [%g2],%l0
inc 16,%g2
subcc %g3,%g2,%g0
bne reloc_loop
- inc 16,%g4
+ inc 16,%g4
clr %l0
clr %l1
clr_bss:
/* clear bss area (the relocated) */
- set __bss_start,%g2
- set __bss_end,%g3
+ SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
sub %g3,%g2,%g3
add %g3,%g4,%g3
clr %g1 /* std %g0 uses g0 and g1 */
inc 16,%g4
cmp %g3,%g4
bne clr_bss_16
- nop
+ nop
/* add offsets to GOT table */
fixup_got:
- set __got_start,%g4
- set __got_end,%g3
+ SPARC_LOAD_ADDRESS(__got_start, l7, g4)
+ SPARC_LOAD_ADDRESS(__got_end, l7, g3)
/*
* new got offset = (old GOT-PTR (read with ld) -
* CONFIG_SYS_RELOC_MONITOR_BASE(from define) ) +
* Destination Address (from define)
*/
set CONFIG_SYS_RELOC_MONITOR_BASE,%g2
- set TEXT_START, %g1
+ SPARC_LOAD_ADDRESS(TEXT_START, l7, g1)
add %g4,%g2,%g4
sub %g4,%g1,%g4
add %g3,%g2,%g3
inc 4,%g4
cmp %g3,%g4
bne got_loop
- nop
+ nop
prom_relocate:
- set __prom_start, %g2
- set __prom_end, %g3
+ SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
+ SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
set CONFIG_SYS_PROM_OFFSET, %g4
prom_relocate_loop:
inc 16,%g2
subcc %g3,%g2,%g0
bne prom_relocate_loop
- inc 16,%g4
+ inc 16,%g4
/* Trap table has been moved, lets tell CPU about
* the new trap table address
nop
/* Call relocated init functions */
jump:
- set cpu_init_f2,%o1
+ SPARC_LOAD_ADDRESS(cpu_init_f2, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
- set board_init_f,%o1
+ SPARC_LOAD_ADDRESS(board_init_f, l7, o1)
set CONFIG_SYS_RELOC_MONITOR_BASE,%o2
add %o1,%o2,%o1
sub %o1,%g1,%o1
call %o1
- clr %o0
+ clr %o0
dead: ta 0 ! if call returns...
nop