BUILDMAN="arm926ejs -x mx,siemens,atmel"
- env:
- BUILDMAN="atmel"
- - env:
- - BUILDMAN="aries"
- env:
BUILDMAN="boundary engicam toradex"
- env:
- BUILDMAN="sun50i"
- env:
- JOB="Catch-all ARM"
- BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,aries,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
+ BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
- env:
- BUILDMAN="sandbox x86"
TOOLCHAIN="x86_64"
socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_is1.dtb \
- socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_dbm_soc1.dtb \
socfpga_cyclone5_de0_nano_soc.dtb \
dtb-$(CONFIG_TARGET_SAMA5D3_XPLAINED) += \
at91-sama5d3_xplained.dtb
-dtb-$(CONFIG_TARGET_MA5D4EK) += \
- at91-sama5d4_ma5d4evk.dts.dtb
-
dtb-$(CONFIG_TARGET_SAMA5D4EK) += \
at91-sama5d4ek.dtb
+++ /dev/null
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "sama5d4.dtsi"
-
-/ {
- model = "Aries/DENX MA5D4";
- compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
-
- memory {
- reg = <0x20000000 0x10000000>;
- };
-
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
-
- clk20m: clk20m {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <20000000>;
- clock-output-names = "clk20m";
- };
- };
-
- ahb {
- apb {
- mmc0: mmc@f8000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
- vmmc-supply = <&vcc_mmc0_reg>;
- vqmmc-supply = <&vcc_3v3_reg>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <8>;
- broken-cd;
- };
- };
-
- spi0: spi@f8010000 {
- cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
- status = "okay";
-
- m25p80@0 {
- compatible = "atmel,at25df321a";
- spi-max-frequency = <50000000>;
- reg = <0>;
- };
- };
-
- i2c0: i2c@f8014000 {
- status = "okay";
- };
-
- spi1: spi@fc018000 {
- cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
- status = "okay";
-
- can0: can@0 {
- compatible = "microchip,mcp2515";
- reg = <0>;
- clocks = <&clk20m>;
- interrupt-parent = <&pioE>;
- interrupts = <6 IRQ_TYPE_EDGE_RISING>;
- spi-max-frequency = <10000000>;
- };
-
- can1: can@1 {
- compatible = "microchip,mcp2515";
- reg = <1>;
- clocks = <&clk20m>;
- interrupt-parent = <&pioE>;
- interrupts = <7 IRQ_TYPE_EDGE_RISING>;
- spi-max-frequency = <10000000>;
- };
- };
-
- tcb2: timer@fc024000 {
- timer@0 {
- compatible = "atmel,tcb-timer";
- reg = <0>;
- };
-
- timer@1 {
- compatible = "atmel,tcb-timer";
- reg = <1>;
- };
- };
-
- adc0: adc@fc034000 {
- pinctrl-names = "default";
- pinctrl-0 = <
- /* external trigger conflicts with USBA_VBUS */
- &pinctrl_adc0_ad0
- &pinctrl_adc0_ad1
- &pinctrl_adc0_ad2
- &pinctrl_adc0_ad3
- &pinctrl_adc0_ad4
- >;
- atmel,adc-vref = <3300>;
- status = "okay";
- };
-
- watchdog@fc068640 {
- status = "okay";
- };
- };
- };
-
- vcc_3v3_reg: fixedregulator_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC 3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- vcc_mmc0_reg: fixedregulator_mmc0 {
- compatible = "regulator-fixed";
- gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
- regulator-name = "RST_n MCI0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_reg>;
- regulator-boot-on;
- };
-};
+++ /dev/null
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "at91-sama5d4_ma5d4.dtsi"
-
-/ {
- model = "Aries/DENX MA5D4EVK";
- compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
-
- chosen {
- stdout-path = "serial3:115200n8";
- };
-
- ahb {
- apb {
- hlcdc: hlcdc@f0000000 {
- status = "okay";
-
- hlcdc-display-controller {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
-
- port@0 {
- hlcdc_panel_output: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_input>;
- };
- };
- };
-
- };
-
- macb0: ethernet@f8020000 {
- phy-mode = "rmii";
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
- };
-
- usart0: serial@f802c000 {
- status = "okay";
- };
-
- usart1: serial@f8030000 {
- status = "okay";
- };
-
- mmc1: mmc@fc000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
- vmmc-supply = <&vcc_mmc1_reg>;
- vqmmc-supply = <&vcc_3v3_reg>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- cd-gpios = <&pioE 5 0>;
- };
- };
-
- adc0: adc@fc034000 {
- atmel,adc-ts-wires = <4>;
- atmel,adc-ts-pressure-threshold = <10000>;
- };
-
-
- pinctrl@fc06a000 {
- board {
- pinctrl_mmc1_cd: mmc1_cd {
- atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
- };
- };
- };
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <6>;
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
- status = "okay";
-
- user1 {
- label = "user1";
- gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
-
- user2 {
- label = "user2";
- gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
-
- user3 {
- label = "user3";
- gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- panel: panel {
- /* Actually Ampire 800480R2 */
- compatible = "foxlink,fl500wvr00-a0t", "simple-panel";
- backlight = <&backlight>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- panel_input: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&hlcdc_panel_output>;
- };
- };
- };
-
- vcc_mmc1_reg: fixedregulator_mmc1 {
- compatible = "regulator-fixed";
- gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
- regulator-name = "VDD MCI1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3_reg>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-
-#include "socfpga_cyclone5.dtsi"
-
-/ {
- model = "Aries MCVEVK";
- compatible = "altr,socfpga-cyclone5", "altr,socfpga";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- aliases {
- ethernet0 = &gmac0;
- udc0 = &usb1;
- };
-
- memory {
- name = "memory";
- device_type = "memory";
- reg = <0x0 0x40000000>; /* 1GB */
- };
-
- soc {
- u-boot,dm-pre-reloc;
- };
-};
-
-&gmac0 {
- status = "okay";
- phy-mode = "rgmii";
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&mmc0 {
- status = "okay";
- bus-width = <8>;
- u-boot,dm-pre-reloc;
-};
-
-&usb1 {
- disable-over-current;
- status = "okay";
-};
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
-config TARGET_MA5D4EVK
- bool "Aries MA5D4EVK Evaluation Kit"
- select SAMA5D4
- select SUPPORT_SPL
- select DM
- select DM_SPI
- select SPI
-
config TARGET_MEESC
bool "Support meesc"
select AT91SAM9263
config SYS_SOC
default "at91"
-source "board/aries/ma5d4evk/Kconfig"
source "board/atmel/at91rm9200ek/Kconfig"
source "board/atmel/at91sam9260ek/Kconfig"
source "board/atmel/at91sam9261ek/Kconfig"
select DM_GPIO
select DM_PMIC
-config TARGET_M53EVK
- bool "Support m53evk"
- select MX53
- select SUPPORT_SPL
-
config TARGET_MX51EVK
bool "Support mx51evk"
select BOARD_LATE_INIT
config SYS_SOC
default "mx5"
-source "board/aries/m53evk/Kconfig"
source "board/beckhoff/mx53cx9020/Kconfig"
source "board/freescale/mx51evk/Kconfig"
source "board/freescale/mx53ard/Kconfig"
obj-y += lowlevel_init.o
# common files for mx53 dram initialization
-obj-$(CONFIG_TARGET_M53EVK) += mx53_dram.o
obj-$(CONFIG_TARGET_MX53CX9020) += mx53_dram.o
obj-$(CONFIG_TARGET_MX53LOCO) += mx53_dram.o
config TARGET_BG0900
bool "Support bg0900"
-config TARGET_M28EVK
- bool "Support m28evk"
-
config TARGET_MX28EVK
bool "Support mx28evk"
select BOARD_EARLY_INIT_F
config SYS_SOC
default "mxs"
-source "board/aries/m28evk/Kconfig"
source "board/bluegiga/apx4devkit/Kconfig"
source "board/freescale/mx28evk/Kconfig"
source "board/ppcag/bg0900/Kconfig"
bool "Altera SOCFPGA SoCDK (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
-config TARGET_SOCFPGA_ARIES_MCVEVK
- bool "Aries MCVEVK (Cyclone V)"
- select TARGET_SOCFPGA_CYCLONE5
-
config TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
bool "Devboards DBM-SoC1 (Cyclone V)"
select TARGET_SOCFPGA_CYCLONE5
default "de1-soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
default "de10-nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
default "is1" if TARGET_SOCFPGA_IS1
- default "mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
default "sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
default "socrates" if TARGET_SOCFPGA_EBV_SOCRATES
default "sr1500" if TARGET_SOCFPGA_SR1500
default "altera" if TARGET_SOCFPGA_ARRIA5_SOCDK
default "altera" if TARGET_SOCFPGA_ARRIA10_SOCDK
default "altera" if TARGET_SOCFPGA_CYCLONE5_SOCDK
- default "aries" if TARGET_SOCFPGA_ARIES_MCVEVK
default "devboards" if TARGET_SOCFPGA_DEVBOARDS_DBM_SOC1
default "ebv" if TARGET_SOCFPGA_EBV_SOCRATES
default "samtec" if TARGET_SOCFPGA_SAMTEC_VINING_FPGA
default "socfpga_de1_soc" if TARGET_SOCFPGA_TERASIC_DE1_SOC
default "socfpga_de10_nano" if TARGET_SOCFPGA_TERASIC_DE10_NANO
default "socfpga_is1" if TARGET_SOCFPGA_IS1
- default "socfpga_mcvevk" if TARGET_SOCFPGA_ARIES_MCVEVK
default "socfpga_sockit" if TARGET_SOCFPGA_TERASIC_SOCKIT
default "socfpga_socrates" if TARGET_SOCFPGA_EBV_SOCRATES
default "socfpga_sr1500" if TARGET_SOCFPGA_SR1500
+++ /dev/null
-if TARGET_M28EVK
-
-config SYS_BOARD
- default "m28evk"
-
-config SYS_VENDOR
- default "aries"
-
-config SYS_SOC
- default "mxs"
-
-config SYS_CONFIG_NAME
- default "m28evk"
-
-endif
+++ /dev/null
-M28EVK BOARD
-#M: Marek Vasut <marek.vasut@gmail.com>
-S: Orphan (since 2017-07)
-F: board/aries/m28evk/
-F: include/configs/m28evk.h
-F: configs/m28evk_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-ifndef CONFIG_SPL_BUILD
-obj-y := m28evk.o
-else
-obj-y := spl_boot.o
-endif
+++ /dev/null
-Aries M28EVK
-============
-
-Files of the M28/M28EVK port
-----------------------------
-
-arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28
-arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28
-board/aries/m28evk/ - M28EVK board specific files
-include/configs/m28evk.h - M28EVK configuration file
-
-Follow the instructions from doc/README.mxs to generate a bootable SD card or to
-boot from NAND flash.
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Aries M28 module
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sys_proto.h>
-#include <linux/mii.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <errno.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Functions
- */
-int board_early_init_f(void)
-{
- /* IO0 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK0, 480000);
- /* IO1 clock at 480MHz */
- mxs_set_ioclk(MXC_IOCLK1, 480000);
-
- /* SSP0 clock at 96MHz */
- mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
- /* SSP2 clock at 160MHz */
- mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
-
-#ifdef CONFIG_CMD_USB
- mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
- mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
- MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
- gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
-
- mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
- MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
- gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
-#endif
-
- return 0;
-}
-
-int board_init(void)
-{
- /* Adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- return mxs_dram_init();
-}
-
-#ifdef CONFIG_CMD_MMC
-static int m28_mmc_wp(int id)
-{
- if (id != 0) {
- printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
- return 1;
- }
-
- return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
-}
-
-int board_mmc_init(bd_t *bis)
-{
- /* Configure WP as input. */
- gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
- /* Turn on the power to the card. */
- gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
-
- return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-
-#define MII_OPMODE_STRAP_OVERRIDE 0x16
-#define MII_PHY_CTRL1 0x1e
-#define MII_PHY_CTRL2 0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
-#if defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10)
- /* KZ8031 PHY on old boards. */
- const uint32_t freq = 0x0080;
-#else
- /* KZ8021 PHY on new boards. */
- const uint32_t freq = 0x0000;
-#endif
-
- miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
- miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
- if (phy == 3)
- miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- struct mxs_clkctrl_regs *clkctrl_regs =
- (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
- struct eth_device *dev;
- int ret;
-
- ret = cpu_eth_init(bis);
- if (ret)
- return ret;
-
- clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
- CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
- CLKCTRL_ENET_TIME_SEL_RMII_CLK);
-
-#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
- /* Reset the new PHY */
- gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
- udelay(10000);
- gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
- udelay(10000);
-#endif
-
- ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
- if (ret) {
- printf("FEC MXS: Unable to init FEC0\n");
- return ret;
- }
-
- ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
- if (ret) {
- printf("FEC MXS: Unable to init FEC1\n");
- return ret;
- }
-
- dev = eth_get_dev_by_name("FEC0");
- if (!dev) {
- printf("FEC MXS: Unable to get FEC0 device entry\n");
- return -EINVAL;
- }
-
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- printf("FEC MXS: Unable to register FEC0 mii postcall\n");
- return ret;
- }
-
- dev = eth_get_dev_by_name("FEC1");
- if (!dev) {
- printf("FEC MXS: Unable to get FEC1 device entry\n");
- return -EINVAL;
- }
-
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- printf("FEC MXS: Unable to register FEC1 mii postcall\n");
- return ret;
- }
-
- return ret;
-}
-
-#endif
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * ARIES M28 Boot setup
- *
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/iomux-mx28.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-
-#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
-#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
-#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
-
-const iomux_cfg_t iomux_setup[] = {
- /* LED */
- MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
-
- /* framebuffer */
- MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
- MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
- MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
-
- /* UART1 */
-#ifdef CONFIG_ARIES_M28_V10
- MX28_PAD_AUART0_CTS__DUART_RX,
- MX28_PAD_AUART0_RTS__DUART_TX,
-#else
- MX28_PAD_PWM0__DUART_RX,
- MX28_PAD_PWM1__DUART_TX,
-#endif
- MX28_PAD_AUART0_TX__DUART_RTS,
- MX28_PAD_AUART0_RX__DUART_CTS,
-
- /* UART2 */
- MX28_PAD_AUART1_RX__AUART1_RX,
- MX28_PAD_AUART1_TX__AUART1_TX,
- MX28_PAD_AUART1_RTS__AUART1_RTS,
- MX28_PAD_AUART1_CTS__AUART1_CTS,
-
- /* CAN */
- MX28_PAD_GPMI_RDY2__CAN0_TX,
- MX28_PAD_GPMI_RDY3__CAN0_RX,
-
- /* TSC2007 */
- MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
-
- /* MMC0 */
- MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
- MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
- MX28_PAD_SSP0_SCK__SSP0_SCK |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
- MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
- (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), /* Power */
- MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
-
- /* GPMI NAND */
- MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RDN__GPMI_RDN |
- (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
- MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
- MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
-
- /* FEC Ethernet */
- MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
-
- MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
- MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
-#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
- MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
-#endif
-
- /* I2C */
- MX28_PAD_I2C0_SCL__I2C0_SCL,
- MX28_PAD_I2C0_SDA__I2C0_SDA,
-
- /* EMI */
- MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
-
- MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
- MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
-
- /* SPI2 (for flash) */
- MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
- MX28_PAD_SSP2_SS0__SSP2_D3 |
- (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
-};
-
-void board_init_ll(const uint32_t arg, const uint32_t *resptr)
-{
- mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup));
-}
+++ /dev/null
-if TARGET_M53EVK
-
-config SYS_BOARD
- default "m53evk"
-
-config SYS_VENDOR
- default "aries"
-
-config SYS_SOC
- default "mx5"
-
-config SYS_CONFIG_NAME
- default "m53evk"
-
-endif
+++ /dev/null
-M53EVK BOARD
-#M: Marek Vasut <marek.vasut@gmail.com>
-S: Orphan (since 2017-07)
-F: board/aries/m53evk/
-F: include/configs/m53evk.h
-F: configs/m53evk_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Aries M53EVK
-# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
-
-obj-y := m53evk.o
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Aries M53 DRAM init values
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-#include <asm/mach-imx/imximage.cfg>
-
-/* image version */
-IMAGE_VERSION 2
-
-
-/* Boot Offset 0x400, valid for both SD and NAND boot. */
-BOOT_OFFSET FLASH_OFFSET_STANDARD
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */
-DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */
-DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */
-DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */
-
-DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */
-DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */
-DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */
-
-DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */
-DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */
-DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */
-
-DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */
-DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */
-DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */
-
-DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */
-DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */
-DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */
-
-DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */
-DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */
-
-DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */
-DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */
-DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */
-DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */
-
-DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */
-DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */
-
-/* ESDCTL */
-DATA 4 0x63fd9088 0x32383535
-DATA 4 0x63fd9090 0x40383538
-DATA 4 0x63fd907c 0x0136014d
-DATA 4 0x63fd9080 0x01510141
-
-DATA 4 0x63fd9018 0x00011740
-DATA 4 0x63fd9000 0xc3190000
-DATA 4 0x63fd900c 0x555952e3
-DATA 4 0x63fd9010 0xb68e8b63
-DATA 4 0x63fd9014 0x01ff00db
-DATA 4 0x63fd902c 0x000026d2
-DATA 4 0x63fd9030 0x009f0e21
-DATA 4 0x63fd9008 0x12273030
-DATA 4 0x63fd9004 0x0002002d
-DATA 4 0x63fd901c 0x00008032
-DATA 4 0x63fd901c 0x00008033
-DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x092080b0
-DATA 4 0x63fd901c 0x04008040
-DATA 4 0x63fd901c 0x0000803a
-DATA 4 0x63fd901c 0x0000803b
-DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x09208138
-DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00001800
-DATA 4 0x63fd9040 0x04b80003
-DATA 4 0x63fd9058 0x00022227
-DATA 4 0x63fd901c 0x00000000
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Aries M53 module
- *
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/iomux-mx53.h>
-#include <asm/mach-imx/mx5_video.h>
-#include <asm/spl.h>
-#include <linux/errno.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <mmc.h>
-#include <spl.h>
-#include <fsl_esdhc.h>
-#include <asm/gpio.h>
-#include <usb/ehci-ci.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-/* Special MXCFB sync flags are here. */
-#include "../drivers/video/mxcfb.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void setup_iomux_uart(void)
-{
- static const iomux_v3_cfg_t uart_pads[] = {
- MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
- MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
- };
-
- imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-}
-
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- if (port == 0) {
- /* USB OTG PWRON */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
- gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
-
- /* USB OTG Over Current */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
- } else if (port == 1) {
- /* USB Host PWRON */
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
- PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
- gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
-
- /* USB Host Over Current */
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
- }
-
- return 0;
-}
-#endif
-
-static void setup_iomux_fec(void)
-{
- static const iomux_v3_cfg_t fec_pads[] = {
- /* MDIO pads */
- NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
- PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
- NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
-
- /* FEC 0 pads */
- NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
-
- /* FEC 1 pads */
- NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
- PAD_CTL_HYS | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
- };
-
- imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
-}
-
-#ifdef CONFIG_FSL_ESDHC
-struct fsl_esdhc_cfg esdhc_cfg = {
- MMC_SDHC1_BASE_ADDR,
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
- gpio_direction_input(IMX_GPIO_NR(1, 1));
-
- return !gpio_get_value(IMX_GPIO_NR(1, 1));
-}
-
-#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP)
-#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
- PAD_CTL_DSE_HIGH)
-
-int board_mmc_init(bd_t *bis)
-{
- static const iomux_v3_cfg_t sd1_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
- MX53_PAD_EIM_DA13__GPIO3_13,
-
- MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
- };
-
- esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
-
- imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
-
- /* GPIO 2_31 is SD power */
- gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
-
- return fsl_esdhc_initialize(bis, &esdhc_cfg);
-}
-#endif
-
-#ifdef CONFIG_VIDEO
-static struct fb_videomode const ampire_wvga = {
- .name = "Ampire",
- .refresh = 60,
- .xres = 800,
- .yres = 480,
- .pixclock = 29851, /* picosecond (33.5 MHz) */
- .left_margin = 89,
- .right_margin = 164,
- .upper_margin = 23,
- .lower_margin = 10,
- .hsync_len = 10,
- .vsync_len = 10,
- .sync = FB_SYNC_CLK_LAT_FALL,
-};
-
-int board_video_skip(void)
-{
- int ret;
- ret = ipuv3_fb_init(&ire_wvga, 1, IPU_PIX_FMT_RGB666);
- if (ret)
- printf("Ampire LCD cannot be configured: %d\n", ret);
- return ret;
-}
-#endif
-
-#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
-
-static void setup_iomux_i2c(void)
-{
- static const iomux_v3_cfg_t i2c_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
- NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
- };
-
- imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
-}
-
-static void setup_iomux_video(void)
-{
- static const iomux_v3_cfg_t lcd_pads[] = {
- MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
- MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
- MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
- MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
- MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
- MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
- MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
- MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
- MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
- MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
- MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
- MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
- MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
- MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
- MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
- MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
- MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
- MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
- MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
- MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
- MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
- MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
- MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
- MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
- MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
- MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
- MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
- MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
- MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
- MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
- MX53_PAD_EIM_A25__IPU_DI1_PIN12,
- MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
- };
-
- imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-}
-
-static void setup_iomux_nand(void)
-{
- static const iomux_v3_cfg_t nand_pads[] = {
- NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
- PAD_CTL_PUS_100K_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
- PAD_CTL_PUS_100K_UP),
- NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
- PAD_CTL_DSE_HIGH),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
- };
-
- imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
-}
-
-static void m53_set_clock(void)
-{
- int ret;
- const uint32_t ref_clk = MXC_HCLK;
- const uint32_t dramclk = 400;
- uint32_t cpuclk;
-
- imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
- PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
- gpio_direction_input(IMX_GPIO_NR(4, 0));
-
- /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
- cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
-
- ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
- if (ret)
- printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
- if (ret) {
- printf("CPU: Switch peripheral clock to %dMHz failed\n",
- dramclk);
- }
-
- ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
- if (ret)
- printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
-}
-
-static void m53_set_nand(void)
-{
- u32 i;
-
- /* NAND flash is muxed on ATA pins */
- setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
-
- /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
- for (i = 0x4; i < 0x94; i += 0x18) {
- clrbits_le32(WEIM_BASE_ADDR + i,
- WEIM_GCR2_MUX16_BYP_GRANT_MASK);
- }
-
- mxc_set_clock(0, 33, MXC_NFC_CLK);
- enable_nfc_clk(1);
-}
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
- setup_iomux_fec();
- setup_iomux_i2c();
- setup_iomux_nand();
- setup_iomux_video();
-
- m53_set_clock();
-
- mxc_set_sata_internal_clock();
-
- /* NAND clock @ 33MHz */
- m53_set_nand();
-
- return 0;
-}
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Board: Aries M53EVK\n");
-
- return 0;
-}
-
-/*
- * NAND SPL
- */
-#ifdef CONFIG_SPL_BUILD
-void spl_board_init(void)
-{
- setup_iomux_nand();
- m53_set_clock();
- m53_set_nand();
-}
-
-u32 spl_boot_device(void)
-{
- return BOOT_DEVICE_NAND;
-}
-#endif
+++ /dev/null
-if TARGET_MA5D4EVK
-
-config SYS_BOARD
- default "ma5d4evk"
-
-config SYS_VENDOR
- default "aries"
-
-config SYS_CONFIG_NAME
- default "ma5d4evk"
-
-endif
+++ /dev/null
-Aries MA5D4EVK BOARD
-#M: Marek Vasut <marek.vasut@gmail.com>
-S: Orphan (since 2017-07)
-F: board/aries/ma5d4evk/
-F: include/configs/ma5d4evk.h
-F: configs/ma5d4evk_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2015 Marek Vasut <marex@denx.de>
-
-obj-y += ma5d4evk.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/atmel_mpddrc.h>
-#include <asm/arch/atmel_usba_udc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/sama5d3_smc.h>
-#include <asm/arch/sama5d4.h>
-#include <atmel_hlcdc.h>
-#include <atmel_mci.h>
-#include <lcd.h>
-#include <mmc.h>
-#include <net.h>
-#include <netdev.h>
-#include <spi.h>
-#include <spi_flash.h>
-#include <spl.h>
-#include <version.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static u8 boot_mode_sf;
-
-/* FIXME gpio code here need to handle through DM_GPIO */
-#ifndef CONFIG_DM_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
-}
-
-static void ma5d4evk_spi0_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
- at91_pio3_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
-
- at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_SPI0);
-}
-#endif /* CONFIG_DM_SPI */
-
-#ifdef CONFIG_CMD_USB
-static void ma5d4evk_usb_hw_init(void)
-{
- at91_set_pio_output(AT91_PIO_PORTE, 11, 0);
- at91_set_pio_output(AT91_PIO_PORTE, 14, 0);
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- .vl_col = 800,
- .vl_row = 480,
- .vl_clk = 33500000,
- .vl_bpix = LCD_BPP,
- .vl_tft = 1,
- .vl_hsync_len = 10,
- .vl_left_margin = 89,
- .vl_right_margin = 164,
- .vl_vsync_len = 10,
- .vl_upper_margin = 23,
- .vl_lower_margin = 10,
- .mmio = ATMEL_BASE_LCDC,
-};
-
-/* No power up/down pin for the LCD pannel */
-void lcd_enable(void) { /* Empty! */ }
-void lcd_disable(void) { /* Empty! */ }
-
-unsigned int has_lcdc(void)
-{
- return 1;
-}
-
-static void ma5d4evk_lcd_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 24, 1); /* LCDPWM */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 29, 1); /* LCDDEN */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
-
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
- at91_pio3_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_LCDC);
-}
-
-#endif /* CONFIG_LCD */
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-/* On-SoM eMMC */
-void ma5d4evk_mci0_hw_init(void)
-{
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 5, 1); /* MCI1 CDA */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 6, 1); /* MCI1 DA0 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 7, 1); /* MCI1 DA1 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 8, 1); /* MCI1 DA2 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 9, 1); /* MCI1 DA3 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 10, 1); /* MCI1 DA4 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 11, 1); /* MCI1 DA5 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 12, 1); /* MCI1 DA6 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 13, 1); /* MCI1 DA7 */
- at91_pio3_set_b_periph(AT91_PIO_PORTC, 4, 0); /* MCI1 CLK */
-
- /*
- * As the mci io internal pull down is too strong, so if the io needs
- * external pull up, the pull up resistor will be very small, if so
- * the power consumption will increase, so disable the internal pull
- * down to save the power.
- */
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 5, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 6, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 7, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 8, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 9, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 10, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 11, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 12, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 13, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTC, 4, 0);
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI0);
-}
-
-/* On-board MicroSD slot */
-void ma5d4evk_mci1_hw_init(void)
-{
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
- at91_pio3_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
-
- /*
- * As the mci io internal pull down is too strong, so if the io needs
- * external pull up, the pull up resistor will be very small, if so
- * the power consumption will increase, so disable the internal pull
- * down to save the power.
- */
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
-
- /* Deal with WP pin on the microSD slot. */
- at91_set_pio_output(AT91_PIO_PORTE, 16, 0);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 16, 1);
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_MCI1);
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int ret;
- void *mci0 = (void *)ATMEL_BASE_MCI0;
- void *mci1 = (void *)ATMEL_BASE_MCI1;
-
- /* De-assert reset on On-SoM eMMC */
- at91_set_pio_output(AT91_PIO_PORTE, 15, 1);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTE, 15, 0);
-
- ret = atmel_mci_init(boot_mode_sf ? mci0 : mci1);
- if (ret) /* eMMC init failed, skip it. */
- at91_set_pio_output(AT91_PIO_PORTE, 15, 0);
-
- /* Enable the power supply to On-board MicroSD */
- at91_set_pio_output(AT91_PIO_PORTE, 17, 0);
- ret = atmel_mci_init(boot_mode_sf ? mci1 : mci0);
- if (ret) /* uSD init failed, power it down. */
- at91_set_pio_output(AT91_PIO_PORTE, 17, 1);
-
- return 0;
-}
-#endif /* CONFIG_GENERIC_ATMEL_MCI */
-
-#ifdef CONFIG_MACB
-void ma5d4evk_macb0_hw_init(void)
-{
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
- at91_pio3_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
-
- /* Enable clock */
- at91_periph_clk_enable(ATMEL_ID_GMAC0);
-}
-#endif
-
-static void ma5d4evk_serial_hw_init(void)
-{
- /* USART0 */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); /* TXD */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 0); /* RXD */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 0); /* RTS */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 0); /* CTS */
- at91_periph_clk_enable(ATMEL_ID_USART0);
-
- /* USART1 */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 17, 1); /* TXD */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 16, 0); /* RXD */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 15, 0); /* RTS */
- at91_pio3_set_a_periph(AT91_PIO_PORTD, 14, 0); /* CTS */
- at91_periph_clk_enable(ATMEL_ID_USART1);
-}
-
-int board_early_init_f(void)
-{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOB);
- at91_periph_clk_enable(ATMEL_ID_PIOC);
- at91_periph_clk_enable(ATMEL_ID_PIOD);
- at91_periph_clk_enable(ATMEL_ID_PIOE);
-
- /* Configure LEDs as OFF */
- at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
- at91_set_pio_output(AT91_PIO_PORTD, 29, 0);
- at91_set_pio_output(AT91_PIO_PORTD, 30, 0);
-
- ma5d4evk_serial_hw_init();
-
- return 0;
-}
-
-static void board_identify(void)
-{
- struct spi_flash *sf;
- sf = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, CONFIG_SF_DEFAULT_CS,
- CONFIG_SF_DEFAULT_SPEED, CONFIG_SF_DEFAULT_MODE);
- boot_mode_sf = (sf != NULL);
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifndef CONFIG_DM_SPI
- ma5d4evk_spi0_hw_init();
-#endif
-#ifdef CONFIG_GENERIC_ATMEL_MCI
- ma5d4evk_mci0_hw_init();
- ma5d4evk_mci1_hw_init();
-#endif
-#ifdef CONFIG_MACB
- ma5d4evk_macb0_hw_init();
-#endif
-#ifdef CONFIG_LCD
- ma5d4evk_lcd_hw_init();
-#endif
-#ifdef CONFIG_CMD_USB
- ma5d4evk_usb_hw_init();
-#endif
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- at91_udp_hw_init();
-#endif
-
- board_identify();
-
- /* Reset CAN controllers */
- at91_set_pio_output(AT91_PIO_PORTB, 21, 0);
- udelay(100);
- at91_set_pio_output(AT91_PIO_PORTB, 21, 1);
- at91_pio3_set_pio_pulldown(AT91_PIO_PORTB, 21, 0);
-
- return 0;
-}
-
-int board_late_init(void)
-{
- env_set("bootmode", boot_mode_sf ? "sf" : "emmc");
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_SIZE);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
-#endif
-
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- usba_udc_probe(&pdata);
-#ifdef CONFIG_USB_ETH_RNDIS
- usb_eth_initialize(bis);
-#endif
-#endif
-
- return rc;
-}
-
-/* SPL */
-#ifdef CONFIG_SPL_BUILD
-void spl_board_init(void)
-{
-#ifndef CONFIG_DM_SPI
- ma5d4evk_spi0_hw_init();
-#endif
-#ifdef CONFIG_GENERIC_ATMEL_MCI
- ma5d4evk_mci0_hw_init();
- ma5d4evk_mci1_hw_init();
-#endif
- board_identify();
-}
-
-void board_boot_order(u32 *spl_boot_list)
-{
- spl_boot_list[0] = spl_boot_device();
-
- switch (spl_boot_list[0]) {
- case BOOT_DEVICE_MMC1:
- case BOOT_DEVICE_MMC2:
- spl_boot_list[0] = BOOT_DEVICE_MMC1;
- break;
- case BOOT_DEVICE_SPI:
- break;
- case BOOT_DEVICE_USB:
- spl_boot_list[0] = BOOT_DEVICE_MMC2;
- break;
- }
-}
-
-static void ddr2_conf(struct atmel_mpddrc_config *ddr2)
-{
- ddr2->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM);
-
- ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 |
- ATMEL_MPDDRC_CR_NR_ROW_13 |
- ATMEL_MPDDRC_CR_CAS_DDR_CAS3 |
- ATMEL_MPDDRC_CR_NB_8BANKS |
- ATMEL_MPDDRC_CR_NDQS_DISABLED |
- ATMEL_MPDDRC_CR_UNAL_SUPPORTED);
-
- ddr2->rtr = 0x2b0;
-
- ddr2->tpr0 = (8 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |
- 3 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |
- 3 << ATMEL_MPDDRC_TPR0_TWR_OFFSET |
- 10 << ATMEL_MPDDRC_TPR0_TRC_OFFSET |
- 3 << ATMEL_MPDDRC_TPR0_TRP_OFFSET |
- 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET |
- 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET |
- 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET);
-
- ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET |
- 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET |
- 25 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET |
- 23 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET);
-
- ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET |
- 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET |
- 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET |
- 2 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET |
- 8 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET);
-}
-
-void mem_init(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- struct atmel_mpddrc_config ddr2;
-
- ddr2_conf(&ddr2);
-
- /* enable MPDDR clock */
- at91_periph_clk_enable(ATMEL_ID_MPDDRC);
- writel(AT91_PMC_DDR, &pmc->scer);
-
- /* DDRAM2 Controller initialize */
- ddr2_init(ATMEL_BASE_MPDDRC, ATMEL_BASE_DDRCS, &ddr2);
-}
-
-void at91_pmc_init(void)
-{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
- u32 tmp;
-
- tmp = AT91_PMC_PLLAR_29 |
- AT91_PMC_PLLXR_PLLCOUNT(0x3f) |
- AT91_PMC_PLLXR_MUL(87) |
- AT91_PMC_PLLXR_DIV(1);
- at91_plla_init(tmp);
-
- writel(0x0 << 8, &pmc->pllicpr);
-
- tmp = AT91_PMC_MCKR_H32MXDIV |
- AT91_PMC_MCKR_PLLADIV_2 |
- AT91_PMC_MCKR_MDIV_3 |
- AT91_PMC_MCKR_CSS_PLLA;
- at91_mck_init(tmp);
-}
-#endif
+++ /dev/null
-Aries MCVEVK BOARD
-#M: Marek Vasut <marek.vasut@gmail.com>
-S: Orphan (since 2017-07)
-F: include/configs/socfpga_mcvevk.h
-F: configs/socfpga_mcvevk_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
-
-obj-y := socfpga.o
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause */
-/*
- * Altera SoCFPGA IOCSR configuration
- */
-
-#ifndef __SOCFPGA_IOCSR_CONFIG_H__
-#define __SOCFPGA_IOCSR_CONFIG_H__
-
-#define CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH 764
-#define CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH 1719
-#define CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH 955
-#define CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH 16766
-
-const unsigned long iocsr_scan_chain0_table[] = {
- 0x00000000,
- 0x00000000,
- 0x0FF00000,
- 0xC0000000,
- 0x0000003F,
- 0x00008000,
- 0x00000000,
- 0x18060000,
- 0x00000060,
- 0x00000000,
- 0x00000000,
- 0x00004000,
- 0x0C0300C0,
- 0x00000000,
- 0x0C000000,
- 0x0000C030,
- 0x0000C030,
- 0x00002000,
- 0x06018060,
- 0x06018000,
- 0x06000018,
- 0x00006018,
- 0x01806018,
- 0x00001000,
-};
-
-const unsigned long iocsr_scan_chain1_table[] = {
- 0x000C0300,
- 0x300C0000,
- 0x300000C0,
- 0x000000C0,
- 0x000300C0,
- 0x00008000,
- 0x00060180,
- 0x18060000,
- 0x18000000,
- 0x00000060,
- 0x00018060,
- 0x00004000,
- 0x000300C0,
- 0x0C030000,
- 0x0C000000,
- 0x00000030,
- 0x0000C030,
- 0x00002000,
- 0x00018060,
- 0x06018000,
- 0x01FE0000,
- 0xF8000000,
- 0x00000007,
- 0x00001000,
- 0x0300C030,
- 0x00000000,
- 0x03000000,
- 0x0000000C,
- 0x00000000,
- 0x00000800,
- 0x00006018,
- 0x01806000,
- 0x00000000,
- 0x00000000,
- 0x00001806,
- 0x00000400,
- 0x0000300C,
- 0x00C03000,
- 0x00C00000,
- 0x00000003,
- 0x00000C03,
- 0x00000200,
- 0x00001806,
- 0x00601800,
- 0x80600000,
- 0x80000001,
- 0x00000601,
- 0x00000100,
- 0x00001000,
- 0x00300C00,
- 0xC0300000,
- 0xC0000000,
- 0x00000300,
- 0x00000080,
-};
-
-const unsigned long iocsr_scan_chain2_table[] = {
- 0x300C0300,
- 0x00000000,
- 0x0FF00000,
- 0x00000000,
- 0x0C0300C0,
- 0x00008000,
- 0x00060180,
- 0x00000000,
- 0x18000000,
- 0x00018060,
- 0x06018060,
- 0x00004000,
- 0x200300C0,
- 0x0C030000,
- 0x0C000000,
- 0x00000030,
- 0x0000C030,
- 0x00002000,
- 0x00018060,
- 0x00000000,
- 0x06000000,
- 0x00010018,
- 0x01806018,
- 0x00001000,
- 0x0000C030,
- 0x00000000,
- 0x03000000,
- 0x0000000C,
- 0x00C0300C,
- 0x00000800,
-};
-
-const unsigned long iocsr_scan_chain3_table[] = {
- 0x0C420D80,
- 0x0C3000FF,
- 0x0A804001,
- 0x07900000,
- 0x08020000,
- 0x00100000,
- 0x0A800000,
- 0x07900000,
- 0x08020000,
- 0x00100000,
- 0x20430000,
- 0x0C003001,
- 0x00C00481,
- 0x00000000,
- 0x00000021,
- 0x82000004,
- 0x05400000,
- 0x03C80000,
- 0x04010000,
- 0x00080000,
- 0x05400000,
- 0x03C80000,
- 0x05400000,
- 0x03C80000,
- 0x90218000,
- 0x86001800,
- 0x00600240,
- 0x80090218,
- 0x00000001,
- 0x40000002,
- 0x02A00000,
- 0x01E40000,
- 0x02A00000,
- 0x01E40000,
- 0x02A00000,
- 0x01E40000,
- 0x02A00000,
- 0x01E40000,
- 0x4810C000,
- 0x43000C00,
- 0x00300120,
- 0xC004810C,
- 0x12043000,
- 0x20000300,
- 0x00040000,
- 0x50670000,
- 0x00000010,
- 0x24590000,
- 0x00001000,
- 0xA0000034,
- 0x0D000001,
- 0xC0680A28,
- 0x45034030,
- 0x12481A01,
- 0x80A280D0,
- 0x34030C06,
- 0x01A01450,
- 0x280D0000,
- 0x30C0680A,
- 0x02490340,
- 0xD000001A,
- 0x0680A280,
- 0x10040000,
- 0x00200000,
- 0x10040000,
- 0x00200000,
- 0x15000000,
- 0x0F200000,
- 0x15000000,
- 0x0F200000,
- 0x01FE0000,
- 0x18000000,
- 0x01800902,
- 0x00240860,
- 0x007F8006,
- 0x00000000,
- 0x0A800001,
- 0x07900000,
- 0x0A800000,
- 0x07900000,
- 0x0A800000,
- 0x07900000,
- 0x08020000,
- 0x00100000,
- 0x20430000,
- 0x0C003001,
- 0x00C00481,
- 0x00000FF0,
- 0x4810C000,
- 0x80000C00,
- 0x05400000,
- 0x02480000,
- 0x04000000,
- 0x00080000,
- 0x05400000,
- 0x03C80000,
- 0x05400000,
- 0x03C80000,
- 0x90218000,
- 0x86001800,
- 0x00600240,
- 0x80090218,
- 0x24086001,
- 0x40000600,
- 0x02A00040,
- 0x01E40000,
- 0x02A00000,
- 0x01E40000,
- 0x02A00000,
- 0x01E40000,
- 0x02A00000,
- 0x01E40000,
- 0x4810C000,
- 0x43000C00,
- 0x00300120,
- 0xC004810C,
- 0x12043000,
- 0x20000300,
- 0x00040000,
- 0x50670000,
- 0x00000010,
- 0x24590000,
- 0x00001000,
- 0xA0000034,
- 0x0D000001,
- 0xC0680A28,
- 0x49034030,
- 0x12481A02,
- 0x80A280D0,
- 0x34030C06,
- 0x01A00040,
- 0x280D0002,
- 0x30C0680A,
- 0x02490340,
- 0xD00A281A,
- 0x0680A280,
- 0x10040000,
- 0x00200000,
- 0x10040000,
- 0x00200000,
- 0x15000000,
- 0x0F200000,
- 0x15000000,
- 0x0F200000,
- 0x01FE0000,
- 0x18000000,
- 0x01800902,
- 0x00240860,
- 0x007F8006,
- 0x00000000,
- 0x99300001,
- 0x34343400,
- 0xAA0D4000,
- 0x01C3A800,
- 0xAA0D4000,
- 0x01C3A890,
- 0xAA0D4000,
- 0x01C3A800,
- 0x00040100,
- 0x00000800,
- 0x00000000,
- 0x00001208,
- 0x00482000,
- 0x01000000,
- 0x00000000,
- 0x00410482,
- 0x0006A000,
- 0x0001B400,
- 0x00020000,
- 0x00000400,
- 0x0002A000,
- 0x0001E400,
- 0x5506A000,
- 0x00E1D400,
- 0x00000000,
- 0x2043090C,
- 0x00003001,
- 0x90400000,
- 0x00000000,
- 0x2020C243,
- 0x2A835000,
- 0x0070EA00,
- 0x2A835000,
- 0x0070EA24,
- 0x2A835000,
- 0x0070EA00,
- 0x00010040,
- 0x00000200,
- 0x00000000,
- 0x00000482,
- 0x00120800,
- 0x00002000,
- 0x80000000,
- 0x00104120,
- 0x00000200,
- 0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F3690D,
- 0x1A041414,
- 0x00D00000,
- 0x18864000,
- 0x49247A06,
- 0x9A28A3D7,
- 0xF511451E,
- 0x0356E388,
- 0x821A0000,
- 0x0000D000,
- 0x05140680,
- 0xD749247A,
- 0x1E9A28A3,
- 0x88F51145,
- 0x00034EE3,
- 0x00080000,
- 0x00001000,
- 0x00080200,
- 0x00001000,
- 0x000A8000,
- 0x00075000,
- 0x541A8000,
- 0x03875001,
- 0x00000000,
- 0x00000010,
- 0x0080C000,
- 0x41000000,
- 0x00003FC2,
- 0x00820000,
- 0xAA0D4000,
- 0x01C3A800,
- 0xAA0D4000,
- 0x01C3A890,
- 0xAA0D4000,
- 0x01C3A800,
- 0x00040000,
- 0x00000800,
- 0x00000000,
- 0x00001208,
- 0x00482000,
- 0x00800000,
- 0x00000000,
- 0x00410482,
- 0x0006A000,
- 0x0001B400,
- 0x00020000,
- 0x00000400,
- 0x00020080,
- 0x00000400,
- 0x5506A000,
- 0x00E1D400,
- 0x00000000,
- 0x0000090C,
- 0x00000010,
- 0x90400000,
- 0x00000000,
- 0x2020C243,
- 0x2A835000,
- 0x0070EA00,
- 0x2A835000,
- 0x0070EA24,
- 0x2A835000,
- 0x0070EA00,
- 0x00015000,
- 0x0000F200,
- 0x00000000,
- 0x00000482,
- 0x86120800,
- 0x00600240,
- 0x80000000,
- 0x00104120,
- 0x00000200,
- 0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F3690D,
- 0x1A041414,
- 0x00D00000,
- 0x18864000,
- 0x49247A06,
- 0xEBCF23D7,
- 0xF611451E,
- 0x034E9248,
- 0x821A038E,
- 0x0000D000,
- 0x00000680,
- 0xD749247A,
- 0x1E9BCF23,
- 0x88F61145,
- 0x00034EE3,
- 0x00080000,
- 0x00001000,
- 0x00080000,
- 0x00001000,
- 0x000A8000,
- 0x00075000,
- 0x541A8000,
- 0x03875001,
- 0x00000000,
- 0x00000010,
- 0x0080C000,
- 0x41000000,
- 0x00000002,
- 0x00820004,
- 0xAA0D4000,
- 0x01C3A800,
- 0xAA0D4000,
- 0x01C3A890,
- 0xAA0D4000,
- 0x01C3A800,
- 0x00040000,
- 0x00000800,
- 0x00000000,
- 0x00001208,
- 0x00482000,
- 0x00800000,
- 0x00000000,
- 0x00410482,
- 0x0006A000,
- 0x0001B400,
- 0x00020000,
- 0x00000400,
- 0x0002A000,
- 0x0001E400,
- 0x5506A000,
- 0x00E1D400,
- 0x00000000,
- 0x2043090C,
- 0x00003001,
- 0x90400000,
- 0x00000000,
- 0x2020C243,
- 0x2A835000,
- 0x0070EA00,
- 0x2A835000,
- 0x0070EA00,
- 0x2A835000,
- 0x0070EA00,
- 0x00010000,
- 0x00000200,
- 0x00000000,
- 0x00000482,
- 0x00120800,
- 0x00200000,
- 0x80000000,
- 0x00104120,
- 0x00000200,
- 0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F3690D,
- 0x1A041414,
- 0x00D00000,
- 0x18864000,
- 0x49247A06,
- 0x9A28A3D7,
- 0xF431451E,
- 0x034E9248,
- 0x821A0000,
- 0x0000D000,
- 0x00000680,
- 0xD749247A,
- 0x1E9A28A3,
- 0x88F61145,
- 0x000356E3,
- 0x00080000,
- 0x00001000,
- 0x00080000,
- 0x00001000,
- 0x000A8000,
- 0x00075000,
- 0x541A8000,
- 0x03875001,
- 0x00000000,
- 0x00000010,
- 0x0080C000,
- 0x41000000,
- 0x00000002,
- 0x00820004,
- 0xAA0D4000,
- 0x01C3A800,
- 0xAA0D4000,
- 0x01C3A800,
- 0xAA0D4000,
- 0x01C3A800,
- 0x00040000,
- 0x00000800,
- 0x00000000,
- 0x00001208,
- 0x00482000,
- 0x00800000,
- 0x00000000,
- 0x00410482,
- 0x0006A000,
- 0x0001B400,
- 0x00020000,
- 0x00000400,
- 0x00020000,
- 0x00000400,
- 0x5506A000,
- 0x00E1D400,
- 0x00000000,
- 0x0000090C,
- 0x00001000,
- 0x90400000,
- 0x00000000,
- 0x2020C243,
- 0x2A835000,
- 0x0070EA00,
- 0x2A835000,
- 0x0070EA00,
- 0x2A835000,
- 0x0070EA00,
- 0x00010040,
- 0x00000200,
- 0x00000000,
- 0x00000482,
- 0x00120800,
- 0x00400000,
- 0x80000000,
- 0x00104120,
- 0x00000200,
- 0xAC0D5F80,
- 0xFFFFFFFF,
- 0x14F1690D,
- 0x1A041414,
- 0x00D00000,
- 0x08864000,
- 0x49247A02,
- 0xEBCF23DB,
- 0xF431451E,
- 0x0356E388,
- 0x821A0000,
- 0x0000D000,
- 0x00000680,
- 0xD749247A,
- 0x1EEBCF23,
- 0x88F43E79,
- 0x000356A2,
- 0x00080000,
- 0x00001000,
- 0x00080000,
- 0x00001000,
- 0x000A8000,
- 0x00075000,
- 0x541A8000,
- 0x03875001,
- 0x00000000,
- 0x00000010,
- 0x0080C000,
- 0x41000000,
- 0x00000002,
- 0x00820004,
- 0x00489800,
- 0x801A1A1A,
- 0x00000200,
- 0x80000004,
- 0x00000200,
- 0x80000004,
- 0x00000200,
- 0x00000004,
- 0x00000200,
- 0x00000004,
- 0x00040000,
- 0x10000000,
- 0x00000000,
- 0x00004000,
- 0x00010000,
- 0x40002080,
- 0x00000100,
- 0x40000002,
- 0x00000100,
- 0x00000002,
- 0x00000100,
- 0x40000002,
- 0x00000100,
- 0x00000002,
- 0x00020000,
- 0x00000000,
- 0x00000008,
- 0x00000020,
- 0x00008000,
- 0x20001040,
- 0x00000080,
- 0x20000001,
- 0x00000080,
- 0x20000001,
- 0x00000080,
- 0x20000001,
- 0x00000080,
- 0x00000001,
- 0x00010000,
- 0x04000000,
- 0x00FF0000,
- 0x00000000,
- 0x00004000,
- 0x00000800,
- 0xC0000001,
- 0x00041419,
- 0x40000000,
- 0x04000816,
- 0x000D0000,
- 0x00006800,
- 0x00000340,
- 0xD000001A,
- 0x06800000,
- 0x00340000,
- 0x0001A000,
- 0x00000D00,
- 0x40000068,
- 0x1A000003,
- 0x00D00000,
- 0x00068000,
- 0x00003400,
- 0x000001A0,
- 0x00000401,
- 0x00000008,
- 0x00000401,
- 0x00000008,
- 0x00000401,
- 0x00000008,
- 0x00000401,
- 0x80000008,
- 0x0000007F,
- 0x20000000,
- 0x00000000,
- 0xE0000080,
- 0x0000001F,
- 0x00004000,
-};
-
-
-#endif /* __SOCFPGA_IOCSR_CONFIG_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause */
-/*
- * Altera SoCFPGA PinMux configuration
- */
-
-#ifndef __SOCFPGA_PINMUX_CONFIG_H__
-#define __SOCFPGA_PINMUX_CONFIG_H__
-
-const u8 sys_mgr_init_table[] = {
- 3, /* EMACIO0 */
- 3, /* EMACIO1 */
- 3, /* EMACIO2 */
- 3, /* EMACIO3 */
- 3, /* EMACIO4 */
- 3, /* EMACIO5 */
- 3, /* EMACIO6 */
- 3, /* EMACIO7 */
- 3, /* EMACIO8 */
- 3, /* EMACIO9 */
- 3, /* EMACIO10 */
- 3, /* EMACIO11 */
- 3, /* EMACIO12 */
- 3, /* EMACIO13 */
- 0, /* EMACIO14 */
- 0, /* EMACIO15 */
- 0, /* EMACIO16 */
- 0, /* EMACIO17 */
- 0, /* EMACIO18 */
- 0, /* EMACIO19 */
- 3, /* FLASHIO0 */
- 0, /* FLASHIO1 */
- 3, /* FLASHIO2 */
- 3, /* FLASHIO3 */
- 3, /* FLASHIO4 */
- 3, /* FLASHIO5 */
- 3, /* FLASHIO6 */
- 3, /* FLASHIO7 */
- 0, /* FLASHIO8 */
- 3, /* FLASHIO9 */
- 3, /* FLASHIO10 */
- 3, /* FLASHIO11 */
- 0, /* GENERALIO0 */
- 1, /* GENERALIO1 */
- 1, /* GENERALIO2 */
- 0, /* GENERALIO3 */
- 0, /* GENERALIO4 */
- 1, /* GENERALIO5 */
- 1, /* GENERALIO6 */
- 1, /* GENERALIO7 */
- 1, /* GENERALIO8 */
- 0, /* GENERALIO9 */
- 0, /* GENERALIO10 */
- 0, /* GENERALIO11 */
- 0, /* GENERALIO12 */
- 2, /* GENERALIO13 */
- 2, /* GENERALIO14 */
- 1, /* GENERALIO15 */
- 1, /* GENERALIO16 */
- 1, /* GENERALIO17 */
- 1, /* GENERALIO18 */
- 0, /* GENERALIO19 */
- 0, /* GENERALIO20 */
- 0, /* GENERALIO21 */
- 0, /* GENERALIO22 */
- 0, /* GENERALIO23 */
- 0, /* GENERALIO24 */
- 0, /* GENERALIO25 */
- 0, /* GENERALIO26 */
- 0, /* GENERALIO27 */
- 0, /* GENERALIO28 */
- 0, /* GENERALIO29 */
- 0, /* GENERALIO30 */
- 0, /* GENERALIO31 */
- 0, /* MIXED1IO0 */
- 1, /* MIXED1IO1 */
- 1, /* MIXED1IO2 */
- 1, /* MIXED1IO3 */
- 1, /* MIXED1IO4 */
- 0, /* MIXED1IO5 */
- 0, /* MIXED1IO6 */
- 0, /* MIXED1IO7 */
- 1, /* MIXED1IO8 */
- 1, /* MIXED1IO9 */
- 1, /* MIXED1IO10 */
- 1, /* MIXED1IO11 */
- 0, /* MIXED1IO12 */
- 0, /* MIXED1IO13 */
- 0, /* MIXED1IO14 */
- 1, /* MIXED1IO15 */
- 1, /* MIXED1IO16 */
- 1, /* MIXED1IO17 */
- 1, /* MIXED1IO18 */
- 0, /* MIXED1IO19 */
- 0, /* MIXED1IO20 */
- 0, /* MIXED1IO21 */
- 0, /* MIXED2IO0 */
- 0, /* MIXED2IO1 */
- 0, /* MIXED2IO2 */
- 0, /* MIXED2IO3 */
- 0, /* MIXED2IO4 */
- 0, /* MIXED2IO5 */
- 0, /* MIXED2IO6 */
- 0, /* MIXED2IO7 */
- 0, /* GPLINMUX48 */
- 0, /* GPLINMUX49 */
- 0, /* GPLINMUX50 */
- 0, /* GPLINMUX51 */
- 0, /* GPLINMUX52 */
- 0, /* GPLINMUX53 */
- 0, /* GPLINMUX54 */
- 0, /* GPLINMUX55 */
- 0, /* GPLINMUX56 */
- 0, /* GPLINMUX57 */
- 0, /* GPLINMUX58 */
- 0, /* GPLINMUX59 */
- 0, /* GPLINMUX60 */
- 0, /* GPLINMUX61 */
- 0, /* GPLINMUX62 */
- 0, /* GPLINMUX63 */
- 0, /* GPLINMUX64 */
- 0, /* GPLINMUX65 */
- 0, /* GPLINMUX66 */
- 0, /* GPLINMUX67 */
- 0, /* GPLINMUX68 */
- 0, /* GPLINMUX69 */
- 0, /* GPLINMUX70 */
- 1, /* GPLMUX0 */
- 1, /* GPLMUX1 */
- 1, /* GPLMUX2 */
- 1, /* GPLMUX3 */
- 1, /* GPLMUX4 */
- 1, /* GPLMUX5 */
- 1, /* GPLMUX6 */
- 1, /* GPLMUX7 */
- 1, /* GPLMUX8 */
- 1, /* GPLMUX9 */
- 1, /* GPLMUX10 */
- 1, /* GPLMUX11 */
- 1, /* GPLMUX12 */
- 1, /* GPLMUX13 */
- 1, /* GPLMUX14 */
- 1, /* GPLMUX15 */
- 1, /* GPLMUX16 */
- 1, /* GPLMUX17 */
- 1, /* GPLMUX18 */
- 1, /* GPLMUX19 */
- 1, /* GPLMUX20 */
- 1, /* GPLMUX21 */
- 1, /* GPLMUX22 */
- 1, /* GPLMUX23 */
- 1, /* GPLMUX24 */
- 1, /* GPLMUX25 */
- 1, /* GPLMUX26 */
- 1, /* GPLMUX27 */
- 1, /* GPLMUX28 */
- 1, /* GPLMUX29 */
- 1, /* GPLMUX30 */
- 1, /* GPLMUX31 */
- 1, /* GPLMUX32 */
- 1, /* GPLMUX33 */
- 1, /* GPLMUX34 */
- 1, /* GPLMUX35 */
- 1, /* GPLMUX36 */
- 1, /* GPLMUX37 */
- 1, /* GPLMUX38 */
- 1, /* GPLMUX39 */
- 1, /* GPLMUX40 */
- 1, /* GPLMUX41 */
- 1, /* GPLMUX42 */
- 1, /* GPLMUX43 */
- 1, /* GPLMUX44 */
- 1, /* GPLMUX45 */
- 1, /* GPLMUX46 */
- 1, /* GPLMUX47 */
- 1, /* GPLMUX48 */
- 1, /* GPLMUX49 */
- 1, /* GPLMUX50 */
- 1, /* GPLMUX51 */
- 1, /* GPLMUX52 */
- 1, /* GPLMUX53 */
- 1, /* GPLMUX54 */
- 1, /* GPLMUX55 */
- 1, /* GPLMUX56 */
- 1, /* GPLMUX57 */
- 1, /* GPLMUX58 */
- 1, /* GPLMUX59 */
- 1, /* GPLMUX60 */
- 1, /* GPLMUX61 */
- 1, /* GPLMUX62 */
- 1, /* GPLMUX63 */
- 1, /* GPLMUX64 */
- 1, /* GPLMUX65 */
- 1, /* GPLMUX66 */
- 1, /* GPLMUX67 */
- 1, /* GPLMUX68 */
- 1, /* GPLMUX69 */
- 1, /* GPLMUX70 */
- 0, /* NANDUSEFPGA */
- 0, /* UART0USEFPGA */
- 0, /* RGMII1USEFPGA */
- 0, /* SPIS0USEFPGA */
- 0, /* CAN0USEFPGA */
- 0, /* I2C0USEFPGA */
- 0, /* SDMMCUSEFPGA */
- 0, /* QSPIUSEFPGA */
- 0, /* SPIS1USEFPGA */
- 0, /* RGMII0USEFPGA */
- 1, /* UART1USEFPGA */
- 0, /* CAN1USEFPGA */
- 0, /* USB1USEFPGA */
- 0, /* I2C3USEFPGA */
- 0, /* I2C2USEFPGA */
- 0, /* I2C1USEFPGA */
- 0, /* SPIM1USEFPGA */
- 0, /* USB0USEFPGA */
- 0 /* SPIM0USEFPGA */
-};
-#endif /* __SOCFPGA_PINMUX_CONFIG_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause */
-/*
- * Altera SoCFPGA Clock and PLL configuration
- */
-
-#ifndef __SOCFPGA_PLL_CONFIG_H__
-#define __SOCFPGA_PLL_CONFIG_H__
-
-#define CONFIG_HPS_DBCTRL_STAYOSC1 1
-
-#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM 0
-#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER 63
-#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT 0
-#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT 0
-#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
-#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 511
-#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
-#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 15
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
-#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK 1
-#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK 0
-#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK 1
-#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK 0
-#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP 1
-#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP 1
-
-#define CONFIG_HPS_PERPLLGRP_VCO_DENOM 0
-#define CONFIG_HPS_PERPLLGRP_VCO_NUMER 39
-#define CONFIG_HPS_PERPLLGRP_VCO_PSRC 0
-#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT 3
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT 511
-#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT 511
-#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT 4
-#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT 4
-#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT 511
-#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK 0
-#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK 0
-#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK 1
-#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK 1
-#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK 6249
-#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC 2
-#define CONFIG_HPS_PERPLLGRP_SRC_NAND 2
-#define CONFIG_HPS_PERPLLGRP_SRC_QSPI 1
-
-#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM 0
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER 31
-#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC 0
-#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT 1
-#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE 0
-#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT 0
-#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE 0
-#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT 1
-#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE 4
-#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT 5
-#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE 0
-
-#define CONFIG_HPS_CLK_OSC1_HZ 25000000
-#define CONFIG_HPS_CLK_OSC2_HZ 25000000
-#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
-#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
-#define CONFIG_HPS_CLK_MAINVCO_HZ 1600000000
-#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
-#define CONFIG_HPS_CLK_SDRVCO_HZ 800000000
-#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
-#define CONFIG_HPS_CLK_EMAC1_HZ 1953125
-#define CONFIG_HPS_CLK_USBCLK_HZ 200000000
-#define CONFIG_HPS_CLK_NAND_HZ 50000000
-#define CONFIG_HPS_CLK_SDMMC_HZ 200000000
-#define CONFIG_HPS_CLK_QSPI_HZ 3125000
-#define CONFIG_HPS_CLK_SPIM_HZ 200000000
-#define CONFIG_HPS_CLK_CAN0_HZ 100000000
-#define CONFIG_HPS_CLK_CAN1_HZ 100000000
-#define CONFIG_HPS_CLK_GPIODB_HZ 32000
-#define CONFIG_HPS_CLK_L4_MP_HZ 100000000
-#define CONFIG_HPS_CLK_L4_SP_HZ 100000000
-
-#define CONFIG_HPS_ALTERAGRP_MPUCLK 1
-#define CONFIG_HPS_ALTERAGRP_MAINCLK 3
-#define CONFIG_HPS_ALTERAGRP_DBGATCLK 3
-
-
-#endif /* __SOCFPGA_PLL_CONFIG_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: BSD-3-Clause */
-/*
- * Altera SoCFPGA SDRAM configuration
- */
-
-#ifndef __SOCFPGA_SDRAM_CONFIG_H__
-#define __SOCFPGA_SDRAM_CONFIG_H__
-
-/* SDRAM configuration */
-#define CONFIG_HPS_SDR_CTRLCFG_CPORTRDWR_CPORTRDWR 0x5A56A
-#define CONFIG_HPS_SDR_CTRLCFG_CPORTRMAP_CPORTRMAP 0xB00088
-#define CONFIG_HPS_SDR_CTRLCFG_CPORTWIDTH_CPORTWIDTH 0x44555
-#define CONFIG_HPS_SDR_CTRLCFG_CPORTWMAP_CPORTWMAP 0x2C011000
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER 0
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN 0
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN 0
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN 0
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL 8
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE 2
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS 0
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN 1
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT 10
-#define CONFIG_HPS_SDR_CTRLCFG_CTRLWIDTH_CTRLWIDTH 2
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS 3
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_COLBITS 10
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS 1
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS 15
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH 8
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH 32
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN 0
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_READ 0
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE 1
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 6
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 16
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 140
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 5
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 1560
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR 6
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR 4
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TCCD 4
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 5
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 512
-#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR 0
-#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_BC 0
-#define CONFIG_HPS_SDR_CTRLCFG_EXTRATIME1_CFG_EXTRA_CTL_CLK_RD_TO_WR_DIFF_CHIP 0
-#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0
-#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE 0
-#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x0
-#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK 3
-#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES 0
-#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES 8
-#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_0_THRESHOLD1_31_0 0x20820820
-#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD1_59_32 0x8208208
-#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_1_THRESHOLD2_3_0 0
-#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_2_THRESHOLD2_35_4 0x41041041
-#define CONFIG_HPS_SDR_CTRLCFG_MPPACING_3_THRESHOLD2_59_36 0x410410
-#define CONFIG_HPS_SDR_CTRLCFG_MPPRIORITY_USERPRIORITY 0x3FFD1088
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_0_THRESHOLDRSTCYCLES_31_0 0x01010101
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_1_THRESHOLDRSTCYCLES_63_32 0x01010101
-#define CONFIG_HPS_SDR_CTRLCFG_MPTHRESHOLDRST_2_THRESHOLDRSTCYCLES_79_64 0x0101
-#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_0_STATICWEIGHT_31_0 0x21084210
-#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_STATICWEIGHT_49_32 0x1EF84
-#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_1_SUMOFWEIGHT_13_0 0x2020
-#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_2_SUMOFWEIGHT_45_14 0x0
-#define CONFIG_HPS_SDR_CTRLCFG_MPWIEIGHT_3_SUMOFWEIGHT_63_46 0xF800
-#define CONFIG_HPS_SDR_CTRLCFG_PHYCTRL_PHYCTRL_0 0x200
-#define CONFIG_HPS_SDR_CTRLCFG_PORTCFG_AUTOPCHEN 0
-#define CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP 0x760210
-#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL 2
-#define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA 0
-#define CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP 0x980543
-
-/* Sequencer auto configuration */
-#define RW_MGR_ACTIVATE_0_AND_1 0x0D
-#define RW_MGR_ACTIVATE_0_AND_1_WAIT1 0x0E
-#define RW_MGR_ACTIVATE_0_AND_1_WAIT2 0x10
-#define RW_MGR_ACTIVATE_1 0x0F
-#define RW_MGR_CLEAR_DQS_ENABLE 0x49
-#define RW_MGR_GUARANTEED_READ 0x4C
-#define RW_MGR_GUARANTEED_READ_CONT 0x54
-#define RW_MGR_GUARANTEED_WRITE 0x18
-#define RW_MGR_GUARANTEED_WRITE_WAIT0 0x1B
-#define RW_MGR_GUARANTEED_WRITE_WAIT1 0x1F
-#define RW_MGR_GUARANTEED_WRITE_WAIT2 0x19
-#define RW_MGR_GUARANTEED_WRITE_WAIT3 0x1D
-#define RW_MGR_IDLE 0x00
-#define RW_MGR_IDLE_LOOP1 0x7B
-#define RW_MGR_IDLE_LOOP2 0x7A
-#define RW_MGR_INIT_RESET_0_CKE_0 0x6F
-#define RW_MGR_INIT_RESET_1_CKE_0 0x74
-#define RW_MGR_LFSR_WR_RD_BANK_0 0x22
-#define RW_MGR_LFSR_WR_RD_BANK_0_DATA 0x25
-#define RW_MGR_LFSR_WR_RD_BANK_0_DQS 0x24
-#define RW_MGR_LFSR_WR_RD_BANK_0_NOP 0x23
-#define RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x32
-#define RW_MGR_LFSR_WR_RD_BANK_0_WL_1 0x21
-#define RW_MGR_LFSR_WR_RD_DM_BANK_0 0x36
-#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA 0x39
-#define RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS 0x38
-#define RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP 0x37
-#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT 0x46
-#define RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1 0x35
-#define RW_MGR_MRS0_DLL_RESET 0x02
-#define RW_MGR_MRS0_DLL_RESET_MIRR 0x08
-#define RW_MGR_MRS0_USER 0x07
-#define RW_MGR_MRS0_USER_MIRR 0x0C
-#define RW_MGR_MRS1 0x03
-#define RW_MGR_MRS1_MIRR 0x09
-#define RW_MGR_MRS2 0x04
-#define RW_MGR_MRS2_MIRR 0x0A
-#define RW_MGR_MRS3 0x05
-#define RW_MGR_MRS3_MIRR 0x0B
-#define RW_MGR_PRECHARGE_ALL 0x12
-#define RW_MGR_READ_B2B 0x59
-#define RW_MGR_READ_B2B_WAIT1 0x61
-#define RW_MGR_READ_B2B_WAIT2 0x6B
-#define RW_MGR_REFRESH_ALL 0x14
-#define RW_MGR_RETURN 0x01
-#define RW_MGR_SGLE_READ 0x7D
-#define RW_MGR_ZQCL 0x06
-
-/* Sequencer defines configuration */
-#define AFI_RATE_RATIO 1
-#define CALIB_LFIFO_OFFSET 7
-#define CALIB_VFIFO_OFFSET 5
-#define ENABLE_SUPER_QUICK_CALIBRATION 0
-#define IO_DELAY_PER_DCHAIN_TAP 25
-#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP 25
-#define IO_DELAY_PER_OPA_TAP 312
-#define IO_DLL_CHAIN_LENGTH 8
-#define IO_DQDQS_OUT_PHASE_MAX 0
-#define IO_DQS_EN_DELAY_MAX 31
-#define IO_DQS_EN_DELAY_OFFSET 0
-#define IO_DQS_EN_PHASE_MAX 7
-#define IO_DQS_IN_DELAY_MAX 31
-#define IO_DQS_IN_RESERVE 4
-#define IO_DQS_OUT_RESERVE 4
-#define IO_IO_IN_DELAY_MAX 31
-#define IO_IO_OUT1_DELAY_MAX 31
-#define IO_IO_OUT2_DELAY_MAX 0
-#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0
-#define MAX_LATENCY_COUNT_WIDTH 5
-#define READ_VALID_FIFO_SIZE 16
-#define REG_FILE_INIT_SEQ_SIGNATURE 0x55550496
-#define RW_MGR_MEM_ADDRESS_MIRRORING 0
-#define RW_MGR_MEM_DATA_MASK_WIDTH 4
-#define RW_MGR_MEM_DATA_WIDTH 32
-#define RW_MGR_MEM_DQ_PER_READ_DQS 8
-#define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
-#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
-#define RW_MGR_MEM_NUMBER_OF_RANKS 1
-#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
-#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
-#define TINIT_CNTR0_VAL 99
-#define TINIT_CNTR1_VAL 32
-#define TINIT_CNTR2_VAL 32
-#define TRESET_CNTR0_VAL 99
-#define TRESET_CNTR1_VAL 99
-#define TRESET_CNTR2_VAL 10
-
-/* Sequencer ac_rom_init configuration */
-const u32 ac_rom_init[] = {
- 0x20700000,
- 0x20780000,
- 0x10080421,
- 0x10080520,
- 0x10090044,
- 0x100a0008,
- 0x100b0000,
- 0x10380400,
- 0x10080441,
- 0x100804c0,
- 0x100a0024,
- 0x10090010,
- 0x100b0000,
- 0x30780000,
- 0x38780000,
- 0x30780000,
- 0x10680000,
- 0x106b0000,
- 0x10280400,
- 0x10480000,
- 0x1c980000,
- 0x1c9b0000,
- 0x1c980008,
- 0x1c9b0008,
- 0x38f80000,
- 0x3cf80000,
- 0x38780000,
- 0x18180000,
- 0x18980000,
- 0x13580000,
- 0x135b0000,
- 0x13580008,
- 0x135b0008,
- 0x33780000,
- 0x10580008,
- 0x10780000
-};
-
-/* Sequencer inst_rom_init configuration */
-const u32 inst_rom_init[] = {
- 0x80000,
- 0x80680,
- 0x8180,
- 0x8200,
- 0x8280,
- 0x8300,
- 0x8380,
- 0x8100,
- 0x8480,
- 0x8500,
- 0x8580,
- 0x8600,
- 0x8400,
- 0x800,
- 0x8680,
- 0x880,
- 0xa680,
- 0x80680,
- 0x900,
- 0x80680,
- 0x980,
- 0xa680,
- 0x8680,
- 0x80680,
- 0xb68,
- 0xcce8,
- 0xae8,
- 0x8ce8,
- 0xb88,
- 0xec88,
- 0xa08,
- 0xac88,
- 0x80680,
- 0xce00,
- 0xcd80,
- 0xe700,
- 0xc00,
- 0x20ce0,
- 0x20ce0,
- 0x20ce0,
- 0x20ce0,
- 0xd00,
- 0x680,
- 0x680,
- 0x680,
- 0x680,
- 0x60e80,
- 0x61080,
- 0x61080,
- 0x61080,
- 0xa680,
- 0x8680,
- 0x80680,
- 0xce00,
- 0xcd80,
- 0xe700,
- 0xc00,
- 0x30ce0,
- 0x30ce0,
- 0x30ce0,
- 0x30ce0,
- 0xd00,
- 0x680,
- 0x680,
- 0x680,
- 0x680,
- 0x70e80,
- 0x71080,
- 0x71080,
- 0x71080,
- 0xa680,
- 0x8680,
- 0x80680,
- 0x1158,
- 0x6d8,
- 0x80680,
- 0x1168,
- 0x7e8,
- 0x7e8,
- 0x87e8,
- 0x40fe8,
- 0x410e8,
- 0x410e8,
- 0x410e8,
- 0x1168,
- 0x7e8,
- 0x7e8,
- 0xa7e8,
- 0x80680,
- 0x40e88,
- 0x41088,
- 0x41088,
- 0x41088,
- 0x40f68,
- 0x410e8,
- 0x410e8,
- 0x410e8,
- 0xa680,
- 0x40fe8,
- 0x410e8,
- 0x410e8,
- 0x410e8,
- 0x41008,
- 0x41088,
- 0x41088,
- 0x41088,
- 0x1100,
- 0xc680,
- 0x8680,
- 0xe680,
- 0x80680,
- 0x0,
- 0x8000,
- 0xa000,
- 0xc000,
- 0x80000,
- 0x80,
- 0x8080,
- 0xa080,
- 0xc080,
- 0x80080,
- 0x9180,
- 0x8680,
- 0xa680,
- 0x80680,
- 0x40f08,
- 0x80680
-};
-
-#endif /* __SOCFPGA_SDRAM_CONFIG_H__ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-#include <common.h>
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX28=y
-CONFIG_SYS_TEXT_BASE=0x40002000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_M28EVK=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyAMA0,115200n8 "
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_BOARD_EARLY_INIT_F=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GREPENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:3m(u-boot),512k(env1),512k(env2),14m(boot),238m(data),-@4096k(UBI)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_MMC_MXS=y
-CONFIG_NAND=y
-CONFIG_NAND_MXS=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_CONS_INDEX=0
-CONFIG_SPI=y
-CONFIG_MXS_SPI=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_VIDEO=y
-CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_MX5=y
-CONFIG_SYS_TEXT_BASE=0x71000000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_M53EVK=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-# CONFIG_CMD_BMODE is not set
-CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/aries/m53evk/imximage.cfg"
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttymxc1,115200"
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GREPENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_TRIMFFS=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_CMD_DATE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_MTDIDS_DEFAULT="nand0=mxc_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=mxc_nand:1024k(u-boot),512k(env1),512k(env2),14m(boot),240m(data),-@2048k(UBI)"
-CONFIG_CMD_UBI=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_DWC_AHSATA=y
-CONFIG_FSL_ESDHC=y
-CONFIG_NAND=y
-CONFIG_NAND_MXC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MICREL=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_ETHER_MCS7830=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_FAT_WRITE=y
-CONFIG_OF_LIBFDT=y
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x26f00000
-CONFIG_TARGET_MA5D4EVK=y
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_ma5d4evk"
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS3,115200"
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMI is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_SPI_FLASH=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="AriesEmbedded"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_USB_GADGET_ATMEL_USBA=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y
-CONFIG_FAT_WRITE=y
-# CONFIG_EFI_LOADER is not set
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_ARCH_SOCFPGA=y
-CONFIG_SYS_TEXT_BASE=0x01000040
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_TARGET_SOCFPGA_ARIES_MCVEVK=y
-CONFIG_SPL=y
-CONFIG_SPL_STACK_R_ADDR=0x00800000
-CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_mcvevk"
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200"
-# CONFIG_USE_BOOTCOMMAND is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
-CONFIG_VERSION_VARIABLE=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_MTDIDS_DEFAULT="nor0=ff705000.spi.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=ff705000.spi.0:1m(u-boot),256k(env1),256k(env2),14848k(boot),16m(rootfs),-@1536k(UBI)0"
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SPL_DM=y
-CONFIG_DFU_MMC=y
-CONFIG_FPGA_SOCFPGA=y
-CONFIG_DM_GPIO=y
-CONFIG_DWAPB_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_DW=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_DM_ETH=y
-CONFIG_PHY_GIGE=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_DM_RESET=y
-CONFIG_SPI=y
-CONFIG_CADENCE_QSPI=y
-CONFIG_DESIGNWARE_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="denx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USE_TINY_PRINTF=y
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-#ifndef __CONFIGS_M28EVK_H__
-#define __CONFIGS_M28EVK_H__
-
-/* System configurations */
-#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-/* Memory configuration */
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment */
-#define CONFIG_ENV_SIZE (16 * 1024)
-
-/* Environment is in NAND */
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET (24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */
-#define CONFIG_ENV_OFFSET_REDUND \
- (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#endif
-
-/* RTC */
-#ifdef CONFIG_CMD_DATE
-/* Use the internal RTC in the MXS chip */
-#define CONFIG_RTC_INTERNAL
-#ifdef CONFIG_RTC_INTERNAL
-#define CONFIG_RTC_MXS
-#else
-#define CONFIG_RTC_M41T62
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-#endif
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_EHCI_MXS_PORT1
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#endif
-
-/* SPI */
-#ifdef CONFIG_CMD_SPI
-#define CONFIG_DEFAULT_SPI_BUS 2
-#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
-
-/* SPI FLASH */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_BUS 2
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 40000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-
-#define CONFIG_ENV_SPI_BUS 2
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 40000000
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#endif
-
-#endif
-
-/* LCD */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
-#endif
-
-/* Booting Linux */
-#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Extra Environment */
-#define CONFIG_PREBOOT "run try_bootscript"
-#define CONFIG_HOSTNAME "m28evk"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "consdev=ttyAMA0\0" \
- "baudrate=115200\0" \
- "bootscript=boot.scr\0" \
- "bootdev=/dev/mmcblk0p2\0" \
- "rootdev=/dev/mmcblk0p3\0" \
- "netdev=eth0\0" \
- "hostname=m28evk\0" \
- "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
- "kernel_addr_r=0x42000000\0" \
- "videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \
- "le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \
- "vmode:0\0" \
- "update_nand_full_filename=u-boot.nand\0" \
- "update_nand_firmware_filename=u-boot.sb\0" \
- "update_sd_firmware_filename=u-boot.sd\0" \
- "update_nand_firmware_maxsz=0x100000\0" \
- "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
- "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
- "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
- "nand device 0 ; " \
- "nand info ; " \
- "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
- "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
- "update_nand_full=" /* Update FCB, DBBT and FW */ \
- "if tftp ${update_nand_full_filename} ; then " \
- "run update_nand_get_fcb_size ; " \
- "nand scrub -y 0x0 ${filesize} ; " \
- "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
- "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
- "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
- "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
- "fi\0" \
- "update_nand_firmware=" /* Update only firmware */ \
- "if tftp ${update_nand_firmware_filename} ; then " \
- "run update_nand_get_fcb_size ; " \
- "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
- "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
- "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
- "nand erase ${fcb_sz} ${fw_sz} ; " \
- "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
- "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
- "fi\0" \
- "update_sd_firmware=" /* Update the SD firmware partition */ \
- "if mmc rescan ; then " \
- "if tftp ${update_sd_firmware_filename} ; then " \
- "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
- "setexpr fw_sz ${fw_sz} + 1 ; " \
- "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
- "fi ; " \
- "fi\0" \
- "addcons=" \
- "setenv bootargs ${bootargs} " \
- "console=${consdev},${baudrate}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=" \
- "setenv bootargs ${bootargs} ${miscargs}\0" \
- "adddfltmtd=" \
- "if test \"x${mtdparts}\" == \"x\" ; then " \
- "mtdparts default ; " \
- "fi\0" \
- "addmtd=" \
- "run adddfltmtd ; " \
- "setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addargs=run addcons addmtd addmisc\0" \
- "mmcload=" \
- "mmc rescan ; " \
- "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
- "ubiload=" \
- "ubi part UBI ; ubifsmount ubi0:rootfs ; " \
- "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
- "netload=" \
- "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
- "miscargs=nohlt panic=1\0" \
- "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
- "ubiargs=" \
- "setenv bootargs ubi.mtd=5 " \
- "root=ubi0:rootfs rootfstype=ubifs\0" \
- "nfsargs=" \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
- "mmc_mmc=" \
- "run mmcload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_ubi=" \
- "run mmcload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_nfs=" \
- "run mmcload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_mmc=" \
- "run ubiload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_ubi=" \
- "run ubiload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_nfs=" \
- "run ubiload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_mmc=" \
- "run netload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_ubi=" \
- "run netload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "try_bootscript=" \
- "mmc rescan;" \
- "if test -e mmc 0:2 ${bootscript} ; then " \
- "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
- "then ; " \
- "echo Running bootscript... ; " \
- "source ${kernel_addr_r} ; " \
- "fi ; " \
- "fi\0"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_M28EVK_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Aries M53 configuration
- * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
- */
-
-#ifndef __M53EVK_CONFIG_H__
-#define __M53EVK_CONFIG_H__
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_REVISION_TAG
-#define CONFIG_SYS_FSL_CLK
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-/*
- * Memory configurations
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 CSD0_BASE_ADDR
-#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
-#define PHYS_SDRAM_2 CSD1_BASE_ADDR
-#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
-#define PHYS_SDRAM_SIZE (gd->ram_size)
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-#define CONFIG_SYS_MEMTEST_START 0x70000000
-#define CONFIG_SYS_MEMTEST_END 0x8ff00000
-
-#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
-#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
-#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/*
- * U-Boot general configurations
- */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
- /* Boot argument buffer size */
-
-/*
- * Serial Driver
- */
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART2_BASE
-
-/*
- * MMC Driver
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_ESDHC_NUM 1
-#endif
-
-/*
- * NAND
- */
-#define CONFIG_ENV_SIZE (16 * 1024)
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
-#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
-#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-
-/* Environment is in NAND */
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
-#define CONFIG_ENV_OFFSET_REDUND \
- (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-/*
- * Ethernet on SOC (FEC)
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x0
-#define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
-#define CONFIG_FEC_XCV_TYPE RMII
-#define CONFIG_ETHPRIME "FEC0"
-#endif
-
-/*
- * I2C
- */
-#ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
-#endif
-
-/*
- * RTC
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_M41T62
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-#endif
-
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI_MX5
-#define CONFIG_MXC_USB_PORT 1
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#endif
-
-/*
- * SATA
- */
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
-#define CONFIG_LBA48
-#endif
-
-/*
- * LCD
- */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASHIMAGE_GUARD
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
-#endif
-
-/*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_LOADADDR 0x70800000
-#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/*
- * NAND SPL
- */
-#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
-#define CONFIG_SPL_TEXT_BASE 0x70008000
-#define CONFIG_SPL_PAD_TO 0x8000
-#define CONFIG_SPL_STACK 0x70004000
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
-#define CONFIG_SYS_NAND_PAGE_SIZE 2048
-#define CONFIG_SYS_NAND_OOBSIZE 64
-#define CONFIG_SYS_NAND_PAGE_COUNT 64
-#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
-
-/*
- * Extra Environments
- */
-#define CONFIG_PREBOOT "run try_bootscript"
-#define CONFIG_HOSTNAME "m53evk"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "consdev=ttymxc1\0" \
- "baudrate=115200\0" \
- "bootscript=boot.scr\0" \
- "bootdev=/dev/mmcblk0p1\0" \
- "rootdev=/dev/mmcblk0p2\0" \
- "netdev=eth0\0" \
- "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0" \
- "kernel_addr_r=0x72000000\0" \
- "addcons=" \
- "setenv bootargs ${bootargs} " \
- "console=${consdev},${baudrate}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=" \
- "setenv bootargs ${bootargs} ${miscargs}\0" \
- "adddfltmtd=" \
- "if test \"x${mtdparts}\" == \"x\" ; then " \
- "mtdparts default ; " \
- "fi\0" \
- "addmtd=" \
- "run adddfltmtd ; " \
- "setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addargs=run addcons addmtd addmisc\0" \
- "mmcload=" \
- "mmc rescan ; " \
- "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
- "ubiload=" \
- "ubi part UBI ; ubifsmount ubi0:rootfs ; " \
- "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
- "netload=" \
- "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
- "miscargs=nohlt panic=1\0" \
- "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
- "ubiargs=" \
- "setenv bootargs ubi.mtd=5 " \
- "root=ubi0:rootfs rootfstype=ubifs\0" \
- "nfsargs=" \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
- "mmc_mmc=" \
- "run mmcload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_ubi=" \
- "run mmcload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_nfs=" \
- "run mmcload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_mmc=" \
- "run ubiload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_ubi=" \
- "run ubiload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_nfs=" \
- "run ubiload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_mmc=" \
- "run netload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_ubi=" \
- "run netload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "try_bootscript=" \
- "mmc rescan;" \
- "if test -e mmc 0:1 ${bootscript} ; then " \
- "if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
- "then ; " \
- "echo Running bootscript... ; " \
- "source ${kernel_addr_r} ; " \
- "fi ; " \
- "fi\0"
-
-#endif /* __M53EVK_CONFIG_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Aries MA5D4 configuration
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-
-#ifndef __MA5D4EVK_CONFIG_H__
-#define __MA5D4EVK_CONFIG_H__
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#include "at91-sama5_common.h"
-#define CONFIG_SYS_USE_SERIALFLASH 1
-#define CONFIG_BOARD_LATE_INIT
-
-/* Timer */
-#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c
-
-/*
- * Memory configurations
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_SDRAM_SIZE 0x10000000
-
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR 0x210000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
-/*
- * Environment
- */
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_SYS_MMC_ENV_DEV 0 /* eMMC */
-#define CONFIG_ENV_OFFSET 512 /* just after the MBR */
-
-/*
- * U-Boot general configurations
- */
-
-/*
- * Serial Driver
- */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE 0xf802c000
-#define CONFIG_USART_ID 6
-
-/*
- * Ethernet
- */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_MACB_SEARCH_PHY
-#define CONFIG_ARP_TIMEOUT 200UL
-#define CONFIG_IP_DEFRAG
-#endif
-
-/*
- * LCD
- */
-#ifdef CONFIG_LCD
-#define CONFIG_BMP_16BPP
-#define CONFIG_BMP_24BPP
-#define CONFIG_BMP_32BPP
-#define LCD_BPP LCD_COLOR16
-#define LCD_OUTPUT_BPP 24
-#define CONFIG_ATMEL_HLCD
-#endif
-
-/*
- * SD/MMC
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
-#endif
-
-/*
- * SPI NOR (boot memory)
- */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_ATMEL_SPI0
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 30000000
-#endif
-
-/*
- * USB
- */
-#ifdef CONFIG_CMD_USB
-
-/* USB device */
-#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 * 1024 * 1024)
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-#endif
-
-/*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_LOADADDR 0x20800000
-#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/*
- * Extra Environments
- */
-#define CONFIG_PREBOOT "run try_bootscript"
-#define CONFIG_HOSTNAME "ma5d4evk"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "consdev=ttyS3\0" \
- "baudrate=115200\0" \
- "bootscript=boot.scr\0" \
- "bootdev=/dev/mmcblk0p1\0" \
- "bootpart=0:1\0" \
- "rootdev=/dev/mmcblk0p2\0" \
- "netdev=eth0\0" \
- "dfu_alt_info=mmc raw 0 3867148288\0" \
- "kernel_addr_r=0x22000000\0" \
- "update_spi_firmware_spl_addr=0x21000000\0" \
- "update_spi_firmware_spl_filename=boot.bin\0" \
- "update_spi_firmware_addr=0x22000000\0" \
- "update_spi_firmware_filename=u-boot.img\0" \
- "update_spi_firmware=" /* Update the SPI flash firmware */ \
- "if sf probe ; then " \
- "if tftp ${update_spi_firmware_spl_addr} " \
- "${update_spi_firmware_spl_filename} ; then " \
- "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
- "if tftp ${update_spi_firmware_addr} " \
- "${update_spi_firmware_filename} ; then " \
- "setenv update_spi_firmware_filesize ${filesize} ; " \
- "sf update ${update_spi_firmware_spl_addr} 0x0 " \
- "${update_spi_firmware_spl_filesize} ; " \
- "sf update ${update_spi_firmware_addr} 0x10000 " \
- "${update_spi_firmware_filesize} ; " \
- "fi ; " \
- "fi ; " \
- "fi\0" \
- "addcons=" \
- "setenv bootargs ${bootargs} " \
- "console=${consdev},${baudrate}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=" \
- "setenv bootargs ${bootargs} ${miscargs}\0" \
- "addargs=run addcons addmisc\0" \
- "mmcload=" \
- "mmc rescan ; " \
- "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
- "netload=" \
- "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
- "miscargs=nohlt panic=1\0" \
- "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
- "nfsargs=" \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
- "fdtimg=if test ${bootmode} = \"sf\" ; then " \
- "setenv kernel_fdt 1 ; " \
- "else ; " \
- "setenv kernel_fdt 2 ; " \
- "fi\0" \
- "mmc_mmc=" \
- "run fdtimg mmcload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
- "mmc_nfs=" \
- "run fdtimg mmcload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
- "net_mmc=" \
- "run fdtimg netload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
- "net_nfs=" \
- "run fdtimg netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
- "try_bootscript=" \
- "mmc rescan;" \
- "if test -e mmc 1:1 ${bootscript} ; then " \
- "if load mmc 1:1 ${kernel_addr_r} ${bootscript};" \
- "then ; " \
- "echo Running bootscript... ; " \
- "source ${kernel_addr_r} ; " \
- "fi ; " \
- "fi\0"
-/* SPL */
-#define CONFIG_SPL_TEXT_BASE 0x200000
-#define CONFIG_SPL_MAX_SIZE 0x10000
-#define CONFIG_SPL_BSS_START_ADDR 0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
-#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
-
-#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-
-#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
-
-#define CONFIG_SYS_USE_MMC
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SPL_LIBDISK_SUPPORT
-
-#endif /* __MA5D4EVK_CONFIG_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- */
-#ifndef __CONFIG_ARIES_MCVEVK_H__
-#define __CONFIG_ARIES_MCVEVK_H__
-
-#include <asm/arch/base_addr_ac5.h>
-
-/* Memory configurations */
-#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on MCV */
-
-/* Booting Linux */
-#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_PREBOOT "run try_bootscript"
-#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_LOADADDR 0x01000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Environment is in MMC */
-#define CONFIG_ENV_OVERWRITE
-
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "consdev=ttyS0\0" \
- "baudrate=115200\0" \
- "bootscript=boot.scr\0" \
- "bootdev=/dev/mmcblk0p2\0" \
- "rootdev=/dev/mmcblk0p3\0" \
- "netdev=eth0\0" \
- "hostname=mcvevk\0" \
- "kernel_addr_r=0x10000000\0" \
- "dfu_alt_info=mmc raw 0 3867148288\0" \
- "update_filename=u-boot-with-spl.sfp\0" \
- "update_sd_offset=0x800\0" \
- "update_sd=" /* Update the SD firmware partition */ \
- "if mmc rescan ; then " \
- "if tftp ${update_filename} ; then " \
- "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
- "setexpr fw_sz ${fw_sz} + 1 ; " \
- "mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \
- "fi ; " \
- "fi\0" \
- "update_qspi_offset=0x0\0" \
- "update_qspi=" /* Update the QSPI firmware */ \
- "if sf probe ; then " \
- "if tftp ${update_filename} ; then " \
- "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
- "fi ; " \
- "fi\0" \
- "fpga_filename=output_file.rbf\0" \
- "load_fpga=" /* Load FPGA bitstream */ \
- "if tftp ${fpga_filename} ; then " \
- "fpga load 0 $loadaddr $filesize ; " \
- "bridge enable ; " \
- "fi\0" \
- "addcons=" \
- "setenv bootargs ${bootargs} " \
- "console=${consdev},${baudrate}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=" \
- "setenv bootargs ${bootargs} ${miscargs}\0" \
- "addargs=run addcons addmisc\0" \
- "mmcload=" \
- "mmc rescan ; " \
- "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
- "netload=" \
- "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
- "miscargs=nohlt panic=1\0" \
- "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
- "nfsargs=" \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
- "mmc_mmc=" \
- "run mmcload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_nfs=" \
- "run mmcload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_mmc=" \
- "run netload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "try_bootscript=" \
- "mmc rescan;" \
- "if test -e mmc 0:2 ${bootscript} ; then " \
- "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
- "then ; " \
- "echo Running bootscript... ; " \
- "source ${kernel_addr_r} ; " \
- "fi ; " \
- "fi\0"
-
-/* The rest of the configuration is shared */
-#include <configs/socfpga_common.h>
-
-#endif /* __CONFIG_ARIES_MCVEVK_H__ */
projects / u-boot / commitdiff