arm: zynq: Remove 0x prefixes from cc108

The patch fixing issues reported by DTC:
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0x400000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0x800000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xc00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xd00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xf00000 unit name should not have
leading "0x"

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

diff --git a/arch/arm/dts/zynq-cc108.dts b/arch/arm/dts/zynq-cc108.dts
index 4804da5235dd9b885b2d225974e0d021c75b7167..b9cc000a33e99ec4b0075bd1489618743d142205 100644 (file)
--- a/arch/arm/dts/zynq-cc108.dts
+++ b/arch/arm/dts/zynq-cc108.dts
@@ -70,23 +70,23 @@
                        label = "qspi-fsbl-uboot-bs";
                        reg = <0x0 0x400000>; /* 4MB */
                };
-               partition@0x400000 {
+               partition@400000 {
                        label = "qspi-linux";
                        reg = <0x400000 0x400000>; /* 4MB */
                };
-               partition@0x800000 {
+               partition@800000 {
                        label = "qspi-rootfs";
                        reg = <0x800000 0x400000>; /* 4MB */
                };
-               partition@0xc00000 {
+               partition@c00000 {
                        label = "qspi-devicetree";
                        reg = <0xc00000 0x100000>; /* 1MB */
                };
-               partition@0xd00000 {
+               partition@d00000 {
                        label = "qspi-scratch";
                        reg = <0xd00000 0x200000>; /* 2MB */
                };
-               partition@0xf00000 {
+               partition@f00000 {
                        label = "qspi-uboot-env";
                        reg = <0xf00000 0x100000>; /* 1MB */
                };