ARM: OMAP5-uevm: Add USB MAC ethernet address

Set the usbethaddr based on the OMAP DIE_ID registers
which should be unique for each processor.

Then set this as the usb ethernet MAC address.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index d0c5241cb1a24d42a398b5e0809b55cd6fddb078..97994b08194ed2b8a5b59540993b234dbdca3377 100644 (file)
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -19,6 +19,10 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/ehci.h>
 #include <asm/ehci-omap.h>
+
+#define DIE_ID_REG_BASE     (OMAP54XX_L4_CORE_BASE + 0x2000)
+#define DIE_ID_REG_OFFSET      0x200
+
 #endif
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -144,9 +148,28 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
        int ret;
        int auxclk;
+       int reg;
+       uint8_t device_mac[6];
 
        enable_host_clocks();
 
+       if (!getenv("usbethaddr")) {
+               reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
+
+               /*
+                * create a fake MAC address from the processor ID code.
+                * first byte is 0x02 to signify locally administered.
+                */
+               device_mac[0] = 0x02;
+               device_mac[1] = readl(reg + 0x10) & 0xff;
+               device_mac[2] = readl(reg + 0xC) & 0xff;
+               device_mac[3] = readl(reg + 0x8) & 0xff;
+               device_mac[4] = readl(reg) & 0xff;
+               device_mac[5] = (readl(reg) >> 8) & 0xff;
+
+               eth_setenv_enetaddr("usbethaddr", device_mac);
+       }
+
        auxclk = readl((*prcm)->scrm_auxclk1);
        /* Request auxilary clock */
        auxclk |= AUXCLK_ENABLE_MASK;