--- /dev/null
+/*
+ * Most of this taken from Redboot hal_platform_setup.h with cleanup
+ *
+ * NOTE: I haven't clean this up considerably, just enough to get it
+ * running. See hal_platform_setup.h for the source. See
+ * board/cradle/memsetup.S for another PXA250 setup that is
+ * much cleaner.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/pxa-regs.h>
+
+DRAM_SIZE: .long CFG_DRAM_SIZE
+
+/* wait for coprocessor write complete */
+ .macro CPWAIT reg
+ mrc p15,0,\reg,c2,c0,0
+ mov \reg,\reg
+ sub pc,pc,#4
+ .endm
+
+
+/*
+ * Memory setup
+ */
+
+.globl memsetup
+memsetup:
+
+ mov r10, lr
+
+ /* Set up GPIO pins first ----------------------------------------- */
+
+ ldr r0, =GPSR0
+ ldr r1, =CFG_GPSR0_VAL
+ str r1, [r0]
+
+ ldr r0, =GPSR1
+ ldr r1, =CFG_GPSR1_VAL
+ str r1, [r0]
+
+ ldr r0, =GPSR2
+ ldr r1, =CFG_GPSR2_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR0
+ ldr r1, =CFG_GPCR0_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR1
+ ldr r1, =CFG_GPCR1_VAL
+ str r1, [r0]
+
+ ldr r0, =GPCR2
+ ldr r1, =CFG_GPCR2_VAL
+ str r1, [r0]
+
+ ldr r0, =GPDR0
+ ldr r1, =CFG_GPDR0_VAL
+ str r1, [r0]
+
+ ldr r0, =GPDR1
+ ldr r1, =CFG_GPDR1_VAL
+ str r1, [r0]
+
+ ldr r0, =GPDR2
+ ldr r1, =CFG_GPDR2_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR0_L
+ ldr r1, =CFG_GAFR0_L_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR0_U
+ ldr r1, =CFG_GAFR0_U_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR1_L
+ ldr r1, =CFG_GAFR1_L_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR1_U
+ ldr r1, =CFG_GAFR1_U_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR2_L
+ ldr r1, =CFG_GAFR2_L_VAL
+ str r1, [r0]
+
+ ldr r0, =GAFR2_U
+ ldr r1, =CFG_GAFR2_U_VAL
+ str r1, [r0]
+
+ ldr r0, =PSSR /* enable GPIO pins */
+ ldr r1, =CFG_PSSR_VAL
+ str r1, [r0]
+
+/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */
+/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */
+/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */
+/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */
+/* */
+/* ldr r1, =LED_BLANK */
+/* mov r0, #0xFF */
+/* str r0, [r1] / turn on hex leds */
+/* */
+/*loop: */
+/* */
+/* ldr r0, =0xB0070001 */
+/* ldr r1, =_LED */
+/* str r0, [r1] / hex display */
+
+
+ /* ---------------------------------------------------------------- */
+ /* Enable memory interface */
+ /* */
+ /* The sequence below is based on the recommended init steps */
+ /* detailed in the Intel PXA250 Operating Systems Developers Guide, */
+ /* Chapter 10. */
+ /* ---------------------------------------------------------------- */
+
+ /* ---------------------------------------------------------------- */
+ /* Step 1: Wait for at least 200 microsedonds to allow internal */
+ /* clocks to settle. Only necessary after hard reset... */
+ /* FIXME: can be optimized later */
+ /* ---------------------------------------------------------------- */
+
+ ldr r3, =OSCR /* reset the OS Timer Count to zero */
+ mov r2, #0
+ str r2, [r3]
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
+ /* so 0x300 should be plenty */
+1:
+ ldr r2, [r3]
+ cmp r4, r2
+ bgt 1b
+
+mem_init:
+
+ ldr r1, =MEMC_BASE /* get memory controller base addr. */
+
+ /* ---------------------------------------------------------------- */
+ /* Step 2a: Initialize Asynchronous static memory controller */
+ /* ---------------------------------------------------------------- */
+
+ /* MSC registers: timing, bus width, mem type */
+
+ /* MSC0: nCS(0,1) */
+ ldr r2, =CFG_MSC0_VAL
+ str r2, [r1, #MSC0_OFFSET]
+ ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */
+ /* that data latches */
+ /* MSC1: nCS(2,3) */
+ ldr r2, =CFG_MSC1_VAL
+ str r2, [r1, #MSC1_OFFSET]
+ ldr r2, [r1, #MSC1_OFFSET]
+
+ /* MSC2: nCS(4,5) */
+ ldr r2, =CFG_MSC2_VAL
+ str r2, [r1, #MSC2_OFFSET]
+ ldr r2, [r1, #MSC2_OFFSET]
+
+ /* ---------------------------------------------------------------- */
+ /* Step 2b: Initialize Card Interface */
+ /* ---------------------------------------------------------------- */
+
+ /* MECR: Memory Expansion Card Register */
+ ldr r2, =CFG_MECR_VAL
+ str r2, [r1, #MECR_OFFSET]
+ ldr r2, [r1, #MECR_OFFSET]
+
+ /* MCMEM0: Card Interface slot 0 timing */
+ ldr r2, =CFG_MCMEM0_VAL
+ str r2, [r1, #MCMEM0_OFFSET]
+ ldr r2, [r1, #MCMEM0_OFFSET]
+
+ /* MCMEM1: Card Interface slot 1 timing */
+ ldr r2, =CFG_MCMEM1_VAL
+ str r2, [r1, #MCMEM1_OFFSET]
+ ldr r2, [r1, #MCMEM1_OFFSET]
+
+ /* MCATT0: Card Interface Attribute Space Timing, slot 0 */
+ ldr r2, =CFG_MCATT0_VAL
+ str r2, [r1, #MCATT0_OFFSET]
+ ldr r2, [r1, #MCATT0_OFFSET]
+
+ /* MCATT1: Card Interface Attribute Space Timing, slot 1 */
+ ldr r2, =CFG_MCATT1_VAL
+ str r2, [r1, #MCATT1_OFFSET]
+ ldr r2, [r1, #MCATT1_OFFSET]
+
+ /* MCIO0: Card Interface I/O Space Timing, slot 0 */
+ ldr r2, =CFG_MCIO0_VAL
+ str r2, [r1, #MCIO0_OFFSET]
+ ldr r2, [r1, #MCIO0_OFFSET]
+
+ /* MCIO1: Card Interface I/O Space Timing, slot 1 */
+ ldr r2, =CFG_MCIO1_VAL
+ str r2, [r1, #MCIO1_OFFSET]
+ ldr r2, [r1, #MCIO1_OFFSET]
+
+ /* ---------------------------------------------------------------- */
+ /* Step 2c: Write FLYCNFG FIXME: what's that??? */
+ /* ---------------------------------------------------------------- */
+
+
+ /* ---------------------------------------------------------------- */
+ /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */
+ /* ---------------------------------------------------------------- */
+
+ /* Before accessing MDREFR we need a valid DRI field, so we set */
+ /* this to power on defaults + DIR field. */
+
+ ldr r4, =0x03ca4fff
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+ ldr r4, =0x03ca4030
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+ /* Note: preserve the mdrefr value in r4 */
+
+
+ /* ---------------------------------------------------------------- */
+ /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */
+ /* ---------------------------------------------------------------- */
+
+ /* Initialize SXCNFG register. Assert the enable bits */
+
+ /* Write SXMRS to cause an MRS command to all enabled banks of */
+ /* synchronous static memory. Note that SXLCR need not be written */
+ /* at this time. */
+
+ /* FIXME: we use async mode for now */
+
+
+ /* ---------------------------------------------------------------- */
+ /* Step 4: Initialize SDRAM */
+ /* ---------------------------------------------------------------- */
+
+ /* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure */
+ /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */
+
+ orr r4, r4, #(MDREFR_K1RUN|MDREFR_K2RUN|MDREFR_K0RUN)
+
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+
+ /* Step 4b: de-assert MDREFR:SLFRSH. */
+
+ bic r4, r4, #(MDREFR_SLFRSH)
+
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+
+ /* Step 4c: assert MDREFR:E1PIN and E0PIO */
+
+ orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN)
+
+ str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */
+ ldr r4, [r1, #MDREFR_OFFSET]
+
+
+ /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */
+ /* configure but not enable each SDRAM partition pair. */
+
+ ldr r4, [r1, #MDCNFG_OFFSET]
+ bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1)
+
+ str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */
+ ldr r4, [r1, #MDCNFG_OFFSET]
+
+
+ /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */
+ /* 100..200 µsec. */
+
+ ldr r3, =OSCR /* reset the OS Timer Count to zero */
+ mov r2, #0
+ str r2, [r3]
+ ldr r4, =0x300 /* really 0x2E1 is about 200usec, */
+ /* so 0x300 should be plenty */
+1:
+ ldr r2, [r3]
+ cmp r4, r2
+ bgt 1b
+
+
+ /* Step 4f: Trigger a number (usually 8) refresh cycles by */
+ /* attempting non-burst read or write accesses to disabled */
+ /* SDRAM, as commonly specified in the power up sequence */
+ /* documented in SDRAM data sheets. The address(es) used */
+ /* for this purpose must not be cacheable. */
+
+ ldr r3, =CFG_DRAM_BASE
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+ str r2, [r3]
+
+
+ /* Step 4g: Write MDCNFG with enable bits asserted */
+ /* (MDCNFG:DEx set to 1). */
+
+ ldr r3, [r1, #MDCNFG_OFFSET]
+ orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1)
+ str r3, [r1, #MDCNFG_OFFSET]
+
+ /* Step 4h: Write MDMRS. */
+
+ ldr r2, =CFG_MDMRS_VAL
+ str r2, [r1, #MDMRS_OFFSET]
+
+
+ /* We are finished with Intel's memory controller initialisation */
+
+
+ /* ---------------------------------------------------------------- */
+ /* Disable (mask) all interrupts at interrupt controller */
+ /* ---------------------------------------------------------------- */
+
+initirqs:
+
+ mov r1, #0 /* clear int. level register (IRQ, not FIQ) */
+ ldr r2, =ICLR
+ str r1, [r2]
+
+ ldr r2, =ICMR /* mask all interrupts at the controller */
+ str r1, [r2]
+
+
+ /* ---------------------------------------------------------------- */
+ /* Clock initialisation */
+ /* ---------------------------------------------------------------- */
+
+initclks:
+
+ /* Disable the peripheral clocks, and set the core clock frequency */
+ /* (hard-coding at 398.12MHz for now). */
+
+ /* Turn Off ALL on-chip peripheral clocks for re-configuration */
+ /* Note: See label 'ENABLECLKS' for the re-enabling */
+ ldr r1, =CKEN
+ mov r2, #0
+ str r2, [r1]
+
+
+ /* default value in case no valid rotary switch setting is found */
+ ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */
+
+ /* ... and write the core clock config register */
+ ldr r1, =CCCR
+ str r2, [r1]
+
+ /* enable the 32Khz oscillator for RTC and PowerManager */
+ ldr r1, =OSCC
+ mov r2, #OSCC_OON
+ str r2, [r1]
+
+ /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */
+ /* has settled. */
+60:
+ ldr r2, [r1]
+ ands r2, r2, #1
+ beq 60b
+
+ /* ---------------------------------------------------------------- */
+ /* */
+ /* ---------------------------------------------------------------- */
+
+ /* Save SDRAM size */
+ ldr r1, =DRAM_SIZE
+ str r8, [r1]
+
+ /* Interrupt init: Mask all interrupts */
+ ldr r0, =ICMR /* enable no sources */
+ mov r1, #0
+ str r1, [r0]
+
+ /* FIXME */
+
+#define NODEBUG
+#ifdef NODEBUG
+ /*Disable software and data breakpoints */
+ mov r0,#0
+ mcr p15,0,r0,c14,c8,0 /* ibcr0 */
+ mcr p15,0,r0,c14,c9,0 /* ibcr1 */
+ mcr p15,0,r0,c14,c4,0 /* dbcon */
+
+ /*Enable all debug functionality */
+ mov r0,#0x80000000
+ mcr p14,0,r0,c10,c0,0 /* dcsr */
+
+#endif
+
+ /* ---------------------------------------------------------------- */
+ /* End memsetup */
+ /* ---------------------------------------------------------------- */
+
+endmemsetup:
+
+ mov pc, lr
+
--- /dev/null
+/*
+ * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/*------------------------------------------------------------------------------+ */
+/* */
+/* This source code has been made available to you by IBM on an AS-IS */
+/* basis. Anyone receiving this source is licensed under IBM */
+/* copyrights to use it in any way he or she deems fit, including */
+/* copying it, modifying it, compiling it, and redistributing it either */
+/* with or without modifications. No license under IBM patents or */
+/* patent applications is to be implied by the copyright license. */
+/* */
+/* Any user of this software should understand that IBM cannot provide */
+/* technical support for this software and will not be responsible for */
+/* any consequences resulting from the use of this software. */
+/* */
+/* Any person who transfers this source code or any derivative work */
+/* must include the IBM copyright notice, this paragraph, and the */
+/* preceding two paragraphs in the transferred software. */
+/* */
+/* COPYRIGHT I B M CORPORATION 1995 */
+/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
+/*------------------------------------------------------------------------------- */
+
+/* U-Boot - Startup Code for IBM 4xx PowerPC based Embedded Boards
+ *
+ *
+ * The processor starts at 0xfffffffc and the code is executed
+ * from flash/rom.
+ * in memory, but as long we don't jump around before relocating.
+ * board_init lies at a quite high address and when the cpu has
+ * jumped there, everything is ok.
+ * This works because the cpu gives the FLASH (CS0) the whole
+ * address space at startup, and board_init lies as a echo of
+ * the flash somewhere up there in the memorymap.
+ *
+ * board_init will change CS0 to be positioned at the correct
+ * address and (s)dram will be positioned at address 0
+ */
+#include <config.h>
+#include <mpc8xx.h>
+#include <ppc4xx.h>
+#include <version.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
+#endif
+
+#ifdef CFG_INIT_DCACHE_CS
+# if (CFG_INIT_DCACHE_CS == 0)
+# define PBxAP pb0ap
+# define PBxCR pb0cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 1)
+# define PBxAP pb1ap
+# define PBxCR pb1cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 2)
+# define PBxAP pb2ap
+# define PBxCR pb2cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 3)
+# define PBxAP pb3ap
+# define PBxCR pb3cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 4)
+# define PBxAP pb4ap
+# define PBxCR pb4cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 5)
+# define PBxAP pb5ap
+# define PBxCR pb5cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 6)
+# define PBxAP pb6ap
+# define PBxCR pb6cr
+# endif
+# if (CFG_INIT_DCACHE_CS == 7)
+# define PBxAP pb7ap
+# define PBxCR pb7cr
+# endif
+#endif /* CFG_INIT_DCACHE_CS */
+
+/* We don't want the MMU yet.
+*/
+#undef MSR_KERNEL
+#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
+
+
+ .extern ext_bus_cntlr_init
+ .extern sdram_init
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r14 to access the GOT
+ */
+ START_GOT
+ GOT_ENTRY(_GOT2_TABLE_)
+ GOT_ENTRY(_FIXUP_TABLE_)
+
+ GOT_ENTRY(_start)
+ GOT_ENTRY(_start_of_vectors)
+ GOT_ENTRY(_end_of_vectors)
+ GOT_ENTRY(transfer_to_handler)
+
+ GOT_ENTRY(_end)
+ GOT_ENTRY(.bss)
+ END_GOT
+
+/*
+ * 440 Startup -- on reset only the top 4k of the effective
+ * address space is mapped in by an entry in the instruction
+ * and data shadow TLB. The .bootpg section is located in the
+ * top 4k & does only what's necessary to map in the the rest
+ * of the boot rom. Once the boot rom is mapped in we can
+ * proceed with normal startup.
+ *
+ * NOTE: CS0 only covers the top 2MB of the effective address
+ * space after reset.
+ */
+
+#if defined(CONFIG_440)
+ .section .bootpg,"ax"
+ .globl _start_440
+
+/**************************************************************************/
+_start_440:
+ /*----------------------------------------------------------------*/
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------*/
+ iccci r0,r0 /* NOTE: operands not used for 440 */
+ dccci r0,r0 /* NOTE: operands not used for 440 */
+ sync
+ li r0,0
+ mtspr srr0,r0
+ mtspr srr1,r0
+ mtspr csrr0,r0
+ mtspr csrr1,r0
+
+ /*----------------------------------------------------------------*/
+ /* Initialize debug */
+ /*----------------------------------------------------------------*/
+ mtspr dbcr0,r0
+ mtspr dbcr1,r0
+ mtspr dbcr2,r0
+ mtspr iac1,r0
+ mtspr iac2,r0
+ mtspr iac3,r0
+ mtspr dac1,r0
+ mtspr dac2,r0
+ mtspr dvc1,r0
+ mtspr dvc2,r0
+
+ mfspr r1,dbsr
+ mtspr dbsr,r1 /* Clear all valid bits */
+
+ /*----------------------------------------------------------------*/
+ /* CCR0 init */
+ /*----------------------------------------------------------------*/
+ /* Disable store gathering & broadcast, guarantee inst/data
+ * cache block touch, force load/store alignment
+ * (see errata 1.12: 440_33)
+ */
+ lis r1,0x0030 /* store gathering & broadcast disable */
+ ori r1,r1,0x6000 /* cache touch */
+ mtspr ccr0,r1
+
+ /*----------------------------------------------------------------*/
+ /* Setup interrupt vectors */
+ /*----------------------------------------------------------------*/
+ mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */
+ li r1,0x0100
+ mtspr ivor0,r1 /* Critical input */
+ li r1,0x0200
+ mtspr ivor1,r1 /* Machine check */
+ li r1,0x0300
+ mtspr ivor2,r1 /* Data storage */
+ li r1,0x0400
+ mtspr ivor3,r1 /* Instruction storage */
+ li r1,0x0500
+ mtspr ivor4,r1 /* External interrupt */
+ li r1,0x0600
+ mtspr ivor5,r1 /* Alignment */
+ li r1,0x0700
+ mtspr ivor6,r1 /* Program check */
+ li r1,0x0800
+ mtspr ivor7,r1 /* Floating point unavailable */
+ li r1,0x0c00
+ mtspr ivor8,r1 /* System call */
+ li r1,0x1000
+ mtspr ivor10,r1 /* Decrementer (PIT for 440) */
+ li r1,0x1400
+ mtspr ivor13,r1 /* Data TLB error */
+ li r1,0x1300
+ mtspr ivor14,r1 /* Instr TLB error */
+ li r1,0x2000
+ mtspr ivor15,r1 /* Debug */
+
+ /*----------------------------------------------------------------*/
+ /* Configure cache regions */
+ /*----------------------------------------------------------------*/
+ mtspr inv0,r0
+ mtspr inv1,r0
+ mtspr inv2,r0
+ mtspr inv3,r0
+ mtspr dnv0,r0
+ mtspr dnv1,r0
+ mtspr dnv2,r0
+ mtspr dnv3,r0
+ mtspr itv0,r0
+ mtspr itv1,r0
+ mtspr itv2,r0
+ mtspr itv3,r0
+ mtspr dtv0,r0
+ mtspr dtv1,r0
+ mtspr dtv2,r0
+ mtspr dtv3,r0
+
+ /*----------------------------------------------------------------*/
+ /* Cache victim limits */
+ /*----------------------------------------------------------------*/
+ /* floors 0, ceiling max to use the entire cache -- nothing locked
+ */
+ lis r1,0x0001
+ ori r1,r1,0xf800
+ mtspr ivlim,r1
+ mtspr dvlim,r1
+
+ /*----------------------------------------------------------------*/
+ /* Clear all TLB entries -- TID = 0, TS = 0 */
+ /*----------------------------------------------------------------*/
+ mtspr mmucr,r0
+ li r1,0x003f /* 64 TLB entries */
+ mtctr r1
+0: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
+ subi r1,r1,0x0001
+ bdnz 0b
+
+ /*----------------------------------------------------------------*/
+ /* TLB entry setup -- step thru tlbtab */
+ /*----------------------------------------------------------------*/
+ bl tlbtab /* Get tlbtab pointer */
+ mr r5,r0
+ li r1,0x003f /* 64 TLB entries max */
+ mtctr r1
+ li r4,0 /* TLB # */
+
+ addi r5,r5,-4
+1: lwzu r0,4(r5)
+ cmpwi r0,0
+ beq 2f /* 0 marks end */
+ lwzu r1,4(r5)
+ lwzu r2,4(r5)
+ tlbwe r0,r4,0 /* TLB Word 0 */
+ tlbwe r1,r4,1 /* TLB Word 1 */
+ tlbwe r2,r4,2 /* TLB Word 2 */
+ addi r4,r4,1 /* Next TLB */
+ bdnz 1b
+
+ /*----------------------------------------------------------------*/
+ /* Continue from 'normal' start */
+ /*----------------------------------------------------------------*/
+2: bl 3f
+ b _start
+
+3: li r0,0
+ mtspr srr1,r0 /* Keep things disabled for now */
+ mflr r1
+ mtspr srr0,r1
+ rfi
+#endif
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+ .text
+ .long 0x27051956 /* U-Boot Magic Number */
+ .globl version_string
+version_string:
+ .ascii U_BOOT_VERSION
+ .ascii " (", __DATE__, " - ", __TIME__, ")"
+ .ascii CONFIG_IDENT_STRING, "\0"
+
+/*
+ * Maybe this should be moved somewhere else because the current
+ * location (0x100) is where the CriticalInput Execption should be.
+ */
+ . = EXC_OFF_SYS_RESET
+ .globl _start
+_start:
+
+/*****************************************************************************/
+#if defined(CONFIG_440)
+
+ /*----------------------------------------------------------------*/
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------*/
+ li r0,0x0000
+ lis r1,0xffff
+ mtspr dec,r0 /* prevent dec exceptions */
+ mtspr tbl,r0 /* prevent fit & wdt exceptions */
+ mtspr tbu,r0
+ mtspr tsr,r1 /* clear all timer exception status */
+ mtspr tcr,r0 /* disable all */
+ mtspr esr,r0 /* clear exception syndrome register */
+ mtxer r0 /* clear integer exception register */
+ lis r1,0x0002 /* set CE bit (Critical Exceptions) */
+ ori r1,r1,0x1000 /* set ME bit (Machine Exceptions) */
+ mtmsr r1 /* change MSR */
+
+ /*----------------------------------------------------------------*/
+ /* Debug setup -- some (not very good) ice's need an event*/
+ /* to establish control :-( Define CFG_INIT_DBCR to the dbsr */
+ /* value you need in this case 0x8cff 0000 should do the trick */
+ /*----------------------------------------------------------------*/
+#if defined(CFG_INIT_DBCR)
+ lis r1,0xffff
+ ori r1,r1,0xffff
+ mtspr dbsr,r1 /* Clear all status bits */
+ lis r0,CFG_INIT_DBCR@h
+ ori r0,r0,CFG_INIT_DBCR@l
+ mtspr dbcr0,r0
+ isync
+#endif
+
+ /*----------------------------------------------------------------*/
+ /* Setup the internal SRAM */
+ /*----------------------------------------------------------------*/
+ li r0,0
+ mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
+
+ li r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,isram0_dpc
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr isram0_dpc,r1
+ mfdcr r1,isram0_pmeg
+ andis. r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr isram0_pmeg,r1
+
+ lis r1,0x8000 /* BAS = 8000_0000 */
+ ori r1,r1,0x0380 /* 8k rw */
+ mtdcr isram0_sb0cr,r1
+
+ /*----------------------------------------------------------------*/
+ /* Setup the stack in internal SRAM */
+ /*----------------------------------------------------------------*/
+ lis r1,CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET@l
+
+ li r0,0
+ stwu r0,-4(r1)
+ stwu r0,-4(r1) /* Terminate call chain */
+
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ lis r0,RESET_VECTOR@h /* Address of reset vector */
+ ori r0,r0, RESET_VECTOR@l
+ stwu r1,-8(r1) /* Save back chain and move SP */
+ stw r0,+12(r1) /* Save return addr (underflow vect) */
+
+ GET_GOT
+ bl board_init_f
+
+#endif /* CONFIG_440 */
+
+/*****************************************************************************/
+#ifdef CONFIG_IOP480
+ /*----------------------------------------------------------------------- */
+ /* Set up some machine state registers. */
+ /*----------------------------------------------------------------------- */
+ addi r0,r0,0x0000 /* initialize r0 to zero */
+ mtspr esr,r0 /* clear Exception Syndrome Reg */
+ mttcr r0 /* timer control register */
+ mtexier r0 /* disable all interrupts */
+ addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r4,r4,0x2 /* set CE bit (Critical Exceptions) */
+ mtmsr r4 /* change MSR */
+ addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
+ ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+ mtexisr r4 /* clear all pending interrupts */
+ addis r4,r0,0x8000
+ mtexier r4 /* enable critical exceptions */
+ addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
+ ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
+ mtiocr r4 /* since bit not used) & DRC to latch */
+ /* data bus on rising edge of CAS */
+ /*----------------------------------------------------------------------- */
+ /* Clear XER. */
+ /*----------------------------------------------------------------------- */
+ mtxer r0
+ /*----------------------------------------------------------------------- */
+ /* Invalidate i-cache and d-cache TAG arrays. */
+ /*----------------------------------------------------------------------- */
+ addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
+ addi r4,0,1024 /* 1/4 of I-cache */
+..cloop:
+ iccci 0,r3
+ iccci r4,r3
+ dccci 0,r3
+ addic. r3,r3,-16 /* move back one cache line */
+ bne ..cloop /* loop back to do rest until r3 = 0 */
+
+ /* */
+ /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
+ /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
+ /* */
+
+ /* first copy IOP480 register base address into r3 */
+ addis r3,0,0x5000 /* IOP480 register base address hi */
+/* ori r3,r3,0x0000 / IOP480 register base address lo */
+
+#ifdef CONFIG_ADCIOP
+ /* use r4 as the working variable */
+ /* turn on CS3 (LOCCTL.7) */
+ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
+ andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
+ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
+#endif
+
+#ifdef CONFIG_DASA_SIM
+ /* use r4 as the working variable */
+ /* turn on MA17 (LOCCTL.7) */
+ lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
+ ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
+ stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
+#endif
+
+ /* turn on MA16..13 (LCS0BRD.12 = 0) */
+ lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
+ andi. r4,r4,0xefff /* make bit 12 = 0 */
+ stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
+
+ /* make sure above stores all comlete before going on */
+ sync
+
+ /* last thing, set local init status done bit (DEVINIT.31) */
+ lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
+ oris r4,r4,0x8000 /* make bit 31 = 1 */
+ stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
+
+ /* clear all pending interrupts and disable all interrupts */
+ li r4,-1 /* set p1 to 0xffffffff */
+ stw r4,0x1b0(r3) /* clear all pending interrupts */
+ stw r4,0x1b8(r3) /* clear all pending interrupts */
+ li r4,0 /* set r4 to 0 */
+ stw r4,0x1b4(r3) /* disable all interrupts */
+ stw r4,0x1bc(r3) /* disable all interrupts */
+
+ /* make sure above stores all comlete before going on */
+ sync
+
+ /*----------------------------------------------------------------------- */
+ /* Enable two 128MB cachable regions. */
+ /*----------------------------------------------------------------------- */
+ addis r1,r0,0x8000
+ addi r1,r1,0x0001
+ mticcr r1 /* instruction cache */
+
+ addis r1,r0,0x0000
+ addi r1,r1,0x0000
+ mtdccr r1 /* data cache */
+
+ addis r1,r0,CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+
+ GET_GOT /* initialize GOT access */
+
+ bl board_init_f /* run first part of init code (from Flash) */
+
+#endif /* CONFIG_IOP480 */
+
+/*****************************************************************************/
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405)
+ /*----------------------------------------------------------------------- */
+ /* Clear and set up some registers. */
+ /*----------------------------------------------------------------------- */
+ addi r4,r0,0x0000
+ mtspr sgr,r4
+ mtspr dcwr,r4
+ mtesr r4 /* clear Exception Syndrome Reg */
+ mttcr r4 /* clear Timer Control Reg */
+ mtxer r4 /* clear Fixed-Point Exception Reg */
+ mtevpr r4 /* clear Exception Vector Prefix Reg */
+ addi r4,r0,0x1000 /* set ME bit (Machine Exceptions) */
+ oris r4,r4,0x0002 /* set CE bit (Critical Exceptions) */
+ mtmsr r4 /* change MSR */
+ addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
+ /* dbsr is cleared by setting bits to 1) */
+ mtdbsr r4 /* clear/reset the dbsr */
+
+ /*----------------------------------------------------------------------- */
+ /* Invalidate I and D caches. Enable I cache for defined memory regions */
+ /* to speed things up. Leave the D cache disabled for now. It will be */
+ /* enabled/left disabled later based on user selected menu options. */
+ /* Be aware that the I cache may be disabled later based on the menu */
+ /* options as well. See miscLib/main.c. */
+ /*----------------------------------------------------------------------- */
+ bl invalidate_icache
+ bl invalidate_dcache
+
+ /*----------------------------------------------------------------------- */
+ /* Enable two 128MB cachable regions. */
+ /*----------------------------------------------------------------------- */
+ addis r4,r0,0x8000
+ addi r4,r4,0x0001
+ mticcr r4 /* instruction cache */
+ isync
+
+ addis r4,r0,0x0000
+ addi r4,r4,0x0000
+ mtdccr r4 /* data cache */
+
+#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+ /*----------------------------------------------------------------------- */
+ /* Tune the speed and size for flash CS0 */
+ /*----------------------------------------------------------------------- */
+ bl ext_bus_cntlr_init
+#endif
+
+#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
+ /********************************************************************
+ * Setup OCM - On Chip Memory
+ *******************************************************************/
+ /* Setup OCM */
+ lis r0, 0x7FFF
+ ori r0, r0, 0xFFFF
+ mfdcr r3, ocmiscntl /* get instr-side IRAM config */
+ mfdcr r4, ocmdscntl /* get data-side IRAM config */
+ and r3, r3, r0 /* disable data-side IRAM */
+ and r4, r4, r0 /* disable data-side IRAM */
+ mtdcr ocmiscntl, r3 /* set instr-side IRAM config */
+ mtdcr ocmdscntl, r4 /* set data-side IRAM config */
+ isync
+
+ addis r3, 0, CFG_OCM_DATA_ADDR@h /* OCM location */
+ mtdcr ocmdsarc, r3
+ addis r4, 0, 0xC000 /* OCM data area enabled */
+ mtdcr ocmdscntl, r4
+ isync
+#endif
+
+ /*----------------------------------------------------------------------- */
+ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
+ /*----------------------------------------------------------------------- */
+#ifdef CFG_INIT_DCACHE_CS
+ /*----------------------------------------------------------------------- */
+ /* Memory Bank x (nothingness) initialization 1GB+64MEG */
+ /* used as temporary stack pointer for stage0 */
+ /*----------------------------------------------------------------------- */
+ li r4,PBxAP
+ mtdcr ebccfga,r4
+ lis r4,0x0380
+ ori r4,r4,0x0480
+ mtdcr ebccfgd,r4
+
+ addi r4,0,PBxCR
+ mtdcr ebccfga,r4
+ lis r4,0x400D
+ ori r4,r4,0xa000
+ mtdcr ebccfgd,r4
+
+ /* turn on data chache for this region */
+ lis r4,0x0080
+ mtdccr r4
+
+ /* set stack pointer and clear stack to known value */
+
+ lis r1,CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET@l
+
+ li r4,2048 /* we store 2048 words to stack */
+ mtctr r4
+
+ lis r2,CFG_INIT_RAM_ADDR@h /* we also clear data area */
+ ori r2,r2,CFG_INIT_RAM_END@l /* so cant copy value from r1 */
+
+ lis r4,0xdead /* we store 0xdeaddead in the stack */
+ ori r4,r4,0xdead
+
+..stackloop:
+ stwu r4,-4(r2)
+ bdnz ..stackloop
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+
+#elif defined(CFG_TEMP_STACK_OCM) && \
+ (defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE))
+ /*
+ * Stack in OCM.
+ */
+
+ /* Set up Stack at top of OCM */
+ lis r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@h
+ ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@l
+
+ /* Set up a zeroized stack frame so that backtrace works right */
+ li r0, 0
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* CFG_INIT_DCACHE_CS */
+
+ /*----------------------------------------------------------------------- */
+ /* Initialize SDRAM Controller */
+ /*----------------------------------------------------------------------- */
+ bl sdram_init
+
+ /*
+ * Setup temporary stack pointer only for boards
+ * that do not use SDRAM SPD I2C stuff since it
+ * is already initialized to use DCACHE or OCM
+ * stacks.
+ */
+#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
+ lis r1, CFG_INIT_RAM_ADDR@h
+ ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
+
+ li r0, 0 /* Make room for stack frame header and */
+ stwu r0, -4(r1) /* clear final stack frame so that */
+ stwu r0, -4(r1) /* stack backtraces terminate cleanly */
+ /*
+ * Set up a dummy frame to store reset vector as return address.
+ * this causes stack underflow to reset board.
+ */
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ lis r0, RESET_VECTOR@h /* Address of reset vector */
+ ori r0, r0, RESET_VECTOR@l
+ stwu r1, -8(r1) /* Save back chain and move SP */
+ stw r0, +12(r1) /* Save return addr (underflow vect) */
+#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
+
+ GET_GOT /* initialize GOT access */
+
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+
+ /* NEVER RETURNS! */
+ bl board_init_f /* run first part of init code (from Flash) */
+
+#endif /* CONFIG_405GP || CONFIG_405CR */
+
+
+ .globl _start_of_vectors
+_start_of_vectors:
+
+#if 0
+/*TODO Fixup _start above so we can do this*/
+/* Critical input. */
+ CRIT_EXCEPTION(0x100, CritcalInput, CritcalInputException)
+#endif
+
+/* Machine check */
+ STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception. */
+ STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception. */
+ STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+ STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+ . = 0x600
+Alignment:
+ EXCEPTION_PROLOG
+ mfspr r4,DAR
+ stw r4,_DAR(r21)
+ mfspr r5,DSISR
+ stw r5,_DSISR(r21)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_Alignment:
+ .long AlignmentException - _start + EXC_OFF_SYS_RESET
+ .long int_return - _start + EXC_OFF_SYS_RESET
+
+/* Program check exception */
+ . = 0x700
+ProgramCheck:
+ EXCEPTION_PROLOG
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ li r20,MSR_KERNEL
+ rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
+ lwz r6,GOT(transfer_to_handler)
+ mtlr r6
+ blrl
+.L_ProgramCheck:
+ .long ProgramCheckException - _start + EXC_OFF_SYS_RESET
+ .long int_return - _start + EXC_OFF_SYS_RESET
+
+ /* No FPU on MPC8xx. This exception is not supposed to happen.
+ */
+ STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+ /* I guess we could implement decrementer, and may have
+ * to someday for timekeeping.
+ */
+ STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+ STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+ STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+
+ . = 0xc00
+/*
+ * r0 - SYSCALL number
+ * r3-... arguments
+ */
+SystemCall:
+ addis r11,r0,0 /* get functions table addr */
+ ori r11,r11,0 /* Note: this code is patched in trap_init */
+ addis r12,r0,0 /* get number of functions */
+ ori r12,r12,0
+
+ cmplw 0, r0, r12
+ bge 1f
+
+ rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
+ add r11,r11,r0
+ lwz r11,0(r11)
+
+ li r12,0xd00-4*3 /* save LR & SRRx */
+ mflr r0
+ stw r0,0(r12)
+ mfspr r0,SRR0
+ stw r0,4(r12)
+ mfspr r0,SRR1
+ stw r0,8(r12)
+
+ li r12,0xc00+_back-SystemCall
+ mtlr r12
+ mtspr SRR0,r11
+
+1: SYNC
+ rfi
+
+_back:
+
+ mfmsr r11 /* Disable interrupts */
+ li r12,0
+ ori r12,r12,MSR_EE
+ andc r11,r11,r12
+ SYNC /* Some chip revs need this... */
+ mtmsr r11
+ SYNC
+
+ li r12,0xd00-4*3 /* restore regs */
+ lwz r11,0(r12)
+ mtlr r11
+ lwz r11,4(r12)
+ mtspr SRR0,r11
+ lwz r11,8(r12)
+ mtspr SRR1,r11
+
+ SYNC
+ rfi
+
+ STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+ STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+ STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+ /* On the MPC8xx, this is a software emulation interrupt. It occurs
+ * for all unimplemented and illegal instructions.
+ */
+ STD_EXCEPTION(0x1000, PIT, PITException)
+
+ STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+ STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+ STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+ STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+ STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+ STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+ STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+ STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+ STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+ STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+ STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+ STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+ CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
+
+ .globl _end_of_vectors
+_end_of_vectors:
+
+
+ . = 0x2100
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+ .globl transfer_to_handler
+transfer_to_handler:
+ stw r22,_NIP(r21)
+ lis r22,MSR_POW@h
+ andc r23,r23,r22
+ stw r23,_MSR(r21)
+ SAVE_GPR(7, r21)
+ SAVE_4GPRS(8, r21)
+ SAVE_8GPRS(12, r21)
+ SAVE_8GPRS(24, r21)
+#if 0
+ andi. r23,r23,MSR_PR
+ mfspr r23,SPRG3 /* if from user, fix up tss.regs */
+ beq 2f
+ addi r24,r1,STACK_FRAME_OVERHEAD
+ stw r24,PT_REGS(r23)
+2: addi r2,r23,-TSS /* set r2 to current */
+ tovirt(r2,r2,r23)
+#endif
+ mflr r23
+ andi. r24,r23,0x3f00 /* get vector offset */
+ stw r24,TRAP(r21)
+ li r22,0
+ stw r22,RESULT(r21)
+ mtspr SPRG2,r22 /* r1 is now kernel sp */
+#if 0
+ addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
+ cmplw 0,r1,r2
+ cmplw 1,r1,r24
+ crand 1,1,4
+ bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
+#endif
+ lwz r24,0(r23) /* virtual address of handler */
+ lwz r23,4(r23) /* where to go when done */
+ mtspr SRR0,r24
+ mtspr SRR1,r20
+ mtlr r23
+ SYNC
+ rfi /* jump to handler, enable MMU */
+
+int_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr SRR0,r2
+ mtspr SRR1,r0
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfi
+
+crit_return:
+ mfmsr r28 /* Disable interrupts */
+ li r4,0
+ ori r4,r4,MSR_EE
+ andc r28,r28,r4
+ SYNC /* Some chip revs need this... */
+ mtmsr r28
+ SYNC
+ lwz r2,_CTR(r1)
+ lwz r0,_LINK(r1)
+ mtctr r2
+ mtlr r0
+ lwz r2,_XER(r1)
+ lwz r0,_CCR(r1)
+ mtspr XER,r2
+ mtcrf 0xFF,r0
+ REST_10GPRS(3, r1)
+ REST_10GPRS(13, r1)
+ REST_8GPRS(23, r1)
+ REST_GPR(31, r1)
+ lwz r2,_NIP(r1) /* Restore environment */
+ lwz r0,_MSR(r1)
+ mtspr 990,r2 /* SRR2 */
+ mtspr 991,r0 /* SRR3 */
+ lwz r0,GPR0(r1)
+ lwz r2,GPR2(r1)
+ lwz r1,GPR1(r1)
+ SYNC
+ rfci
+
+/* Cache functions.
+*/
+invalidate_icache:
+ iccci r0,r0 /* for 405, iccci invalidates the */
+ blr /* entire I cache */
+
+invalidate_dcache:
+ addi r6,0,0x0000 /* clear GPR 6 */
+ /* Do loop for # of dcache congruence classes. */
+ addi r7,r0, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
+ /* NOTE: dccci invalidates both */
+ mtctr r7 /* ways in the D cache */
+..dcloop:
+ dccci 0,r6 /* invalidate line */
+ addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
+ bdnz ..dcloop
+ blr
+
+flush_dcache:
+ addis r9,r0,0x0002 /* set mask for EE and CE msr bits */
+ ori r9,r9,0x8000
+ mfmsr r12 /* save msr */
+ andc r9,r12,r9
+ mtmsr r9 /* disable EE and CE */
+ addi r10,r0,0x0001 /* enable data cache for unused memory */
+ mfdccr r9 /* region 0xF8000000-0xFFFFFFFF via */
+ or r10,r10,r9 /* bit 31 in dccr */
+ mtdccr r10
+
+ /* do loop for # of congruence classes. */
+ addi r10,r0,(CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)
+ addi r11,r0,(CFG_DCACHE_SIZE / 2) /* D cache set size - 2 way sets */
+ mtctr r10
+ addi r10,r0,(0xE000-0x10000) /* start at 0xFFFFE000 */
+ add r11,r10,r11 /* add to get to other side of cache line */
+..flush_dcache_loop:
+ lwz r3,0(r10) /* least recently used side */
+ lwz r3,0(r11) /* the other side */
+ dccci r0,r11 /* invalidate both sides */
+ addi r10,r10,CFG_CACHELINE_SIZE /* bump to next line */
+ addi r11,r11,CFG_CACHELINE_SIZE /* bump to next line */
+ bdnz ..flush_dcache_loop
+ sync /* allow memory access to complete */
+ mtdccr r9 /* restore dccr */
+ mtmsr r12 /* restore msr */
+ blr
+
+ .globl icache_enable
+icache_enable:
+ mflr r8
+ bl invalidate_icache
+ mtlr r8
+ isync
+ addis r3,r0, 0x8000 /* set bit 0 */
+ mticcr r3
+ blr
+
+ .globl icache_disable
+icache_disable:
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mticcr r3
+ isync
+ blr
+
+ .globl icache_status
+icache_status:
+ mficcr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl dcache_enable
+dcache_enable:
+ mflr r8
+ bl invalidate_dcache
+ mtlr r8
+ isync
+ addis r3,r0, 0x8000 /* set bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_disable
+dcache_disable:
+ mflr r8
+ bl flush_dcache
+ mtlr r8
+ addis r3,r0, 0x0000 /* clear bit 0 */
+ mtdccr r3
+ blr
+
+ .globl dcache_status
+dcache_status:
+ mfdccr r3
+ srwi r3, r3, 31 /* >>31 => select bit 0 */
+ blr
+
+ .globl get_pvr
+get_pvr:
+ mfspr r3, PVR
+ blr
+
+#if !defined(CONFIG_440)
+ .globl wr_pit
+wr_pit:
+ mtspr pit, r3
+ blr
+#endif
+
+ .globl wr_tcr
+wr_tcr:
+ mtspr tcr, r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in8 */
+/* Description: Input 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in8
+in8:
+ lbz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out8 */
+/* Description: Output 8 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out8
+out8:
+ stb r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16 */
+/* Description: Output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16
+out16:
+ sth r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out16r */
+/* Description: Byte reverse and output 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out16r
+out16r:
+ sthbrx r4,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32 */
+/* Description: Output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32
+out32:
+ stw r4,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: out32r */
+/* Description: Byte reverse and output 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl out32r
+out32r:
+ stwbrx r4,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16 */
+/* Description: Input 16 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in16
+in16:
+ lhz r3,0x0000(r3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in16r */
+/* Description: Input 16 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in16r
+in16r:
+ lhbrx r3,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32 */
+/* Description: Input 32 bits */
+/*------------------------------------------------------------------------------- */
+ .globl in32
+in32:
+ lwz 3,0x0000(3)
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: in32r */
+/* Description: Input 32 bits and byte reverse */
+/*------------------------------------------------------------------------------- */
+ .globl in32r
+in32r:
+ lwbrx r3,r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbf */
+/* Description: Data Cache block flush */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbf
+ppcDcbf:
+ dcbf r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcDcbi */
+/* Description: Data Cache block Invalidate */
+/* Input: r3 = effective address */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcDcbi
+ppcDcbi:
+ dcbi r0,r3
+ blr
+
+/*------------------------------------------------------------------------------- */
+/* Function: ppcSync */
+/* Description: Processor Synchronize */
+/* Input: none. */
+/* Output: none. */
+/*------------------------------------------------------------------------------- */
+ .globl ppcSync
+ppcSync:
+ sync
+ blr
+
+/*------------------------------------------------------------------------------*/
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+ .globl relocate_code
+relocate_code:
+ mr r1, r3 /* Set new stack pointer */
+ mr r9, r4 /* Save copy of Init Data pointer */
+ mr r10, r5 /* Save copy of Destination Address */
+
+ mr r3, r5 /* Destination Address */
+ lis r4, CFG_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CFG_MONITOR_BASE@l
+ lis r5, CFG_MONITOR_LEN@h /* Length in Bytes */
+ ori r5, r5, CFG_MONITOR_LEN@l
+ li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
+
+ /*
+ * Fix GOT pointer:
+ *
+ * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ *
+ * Offset:
+ */
+ sub r15, r10, r4
+
+ /* First our own GOT */
+ add r14, r14, r15
+ /* the the one used by the C code */
+ add r30, r30, r15
+
+ /*
+ * Now relocate code
+ */
+
+ cmplw cr1,r3,r4
+ addi r0,r5,3
+ srwi. r0,r0,2
+ beq cr1,4f /* In place copy is not necessary */
+ beq 7f /* Protect against 0 count */
+ mtctr r0
+ bge cr1,2f
+
+ la r8,-4(r4)
+ la r7,-4(r3)
+1: lwzu r0,4(r8)
+ stwu r0,4(r7)
+ bdnz 1b
+ b 4f
+
+2: slwi r0,r0,2
+ add r8,r4,r0
+ add r7,r3,r0
+3: lwzu r0,-4(r8)
+ stwu r0,-4(r7)
+ bdnz 3b
+
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4: cmpwi r6,0
+ add r5,r3,r5
+ beq 7f /* Always flush prefetch queue in any case */
+ subi r0,r6,1
+ andc r3,r3,r0
+ mr r4,r3
+5: dcbst 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 5b
+ sync /* Wait for all dcbst to complete on bus */
+ mr r4,r3
+6: icbi 0,r4
+ add r4,r4,r6
+ cmplw r4,r5
+ blt 6b
+7: sync /* Wait for all icbi to complete on bus */
+ isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+
+ addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+ mtlr r0
+ blr /* NEVER RETURNS! */
+
+in_ram:
+
+ /*
+ * Relocation Function, r14 point to got2+0x8000
+ *
+ * Adjust got2 pointers, no need to check for 0, this code
+ * already puts a few entries in the table.
+ */
+ li r0,__got2_entries@sectoff@l
+ la r3,GOT(_GOT2_TABLE_)
+ lwz r11,GOT(_GOT2_TABLE_)
+ mtctr r0
+ sub r11,r3,r11
+ addi r3,r3,-4
+1: lwzu r0,4(r3)
+ add r0,r0,r11
+ stw r0,0(r3)
+ bdnz 1b
+
+ /*
+ * Now adjust the fixups and the pointers to the fixups
+ * in case we need to move ourselves again.
+ */
+2: li r0,__fixup_entries@sectoff@l
+ lwz r3,GOT(_FIXUP_TABLE_)
+ cmpwi r0,0
+ mtctr r0
+ addi r3,r3,-4
+ beq 4f
+3: lwzu r4,4(r3)
+ lwzux r0,r4,r11
+ add r0,r0,r11
+ stw r10,0(r3)
+ stw r0,0(r4)
+ bdnz 3b
+4:
+clear_bss:
+ /*
+ * Now clear BSS segment
+ */
+ lwz r3,GOT(.bss)
+ lwz r4,GOT(_end)
+
+ cmplw 0, r3, r4
+ beq 6f
+
+ li r0, 0
+5:
+ stw r0, 0(r3)
+ addi r3, r3, 4
+ cmplw 0, r3, r4
+ bne 5b
+6:
+
+ mr r3, r9 /* Init Data pointer */
+ mr r4, r10 /* Destination Address */
+ bl board_init_r
+
+ /* Problems accessing "end" in C, so do it here */
+ .globl get_endaddr
+get_endaddr:
+ lwz r3,GOT(_end)
+ blr
+
+ /*
+ * Copy exception vector code to low memory
+ *
+ * r3: dest_addr
+ * r7: source address, r8: end address, r9: target address
+ */
+ .globl trap_init
+trap_init:
+ lwz r7, GOT(_start)
+ lwz r8, GOT(_end_of_vectors)
+
+ rlwinm r9, r7, 0, 18, 31 /* _start & 0x3FFF */
+
+ cmplw 0, r7, r8
+ bgelr /* return if r7>=r8 - just in case */
+
+ mflr r4 /* save link register */
+1:
+ lwz r0, 0(r7)
+ stw r0, 0(r9)
+ addi r7, r7, 4
+ addi r9, r9, 4
+ cmplw 0, r7, r8
+ bne 1b
+
+ /*
+ * relocate `hdlr' and `int_return' entries
+ */
+ li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+ li r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 2b
+
+ li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+ bl trap_reloc
+
+ li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+ li r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 3b
+
+ li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+ li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+ bl trap_reloc
+ addi r7, r7, 0x100 /* next exception vector */
+ cmplw 0, r7, r8
+ blt 4b
+
+ mtlr r4 /* restore link register */
+ blr
+
+ /*
+ * Function: relocate entries for one exception vector
+ */
+trap_reloc:
+ lwz r0, 0(r7) /* hdlr ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 0(r7)
+
+ lwz r0, 4(r7) /* int_return ... */
+ add r0, r0, r3 /* ... += dest_addr */
+ stw r0, 4(r7)
+
+ blr
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/pxa-regs.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* FIXME hack so that SA-1111.h will work [cb] */
+
+#ifndef __ASSEMBLY__
+typedef unsigned short Word16 ;
+typedef unsigned int Word32 ;
+typedef Word32 Word ;
+typedef Word Quad [4] ;
+typedef void *Address ;
+typedef void (*ExcpHndlr) (void) ;
+#endif
+
+#ifndef __ASSEMBLY__
+#define io_p2v(PhAdd) (PhAdd)
+#define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#else
+#define __REG(x) (x)
+#endif
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
+#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
+#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
+#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
+#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
+#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
+#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
+#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
+#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
+#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
+#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
+#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
+#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
+#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
+#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
+#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x) __REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
+
+#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15 __REG(0x4000013c) /* Reserved */
+#define DRCMR16 __REG(0x40000140) /* Reserved */
+#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23 __REG(0x4000015c) /* Reserved */
+#define DRCMR24 __REG(0x40000160) /* Reserved */
+#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29 __REG(0x40000174) /* Reserved */
+#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34 __REG(0x40000188) /* Reserved */
+#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39 __REG(0x4000019C) /* Reserved */
+
+#define DRCMRRXSADR DRCMR2
+#define DRCMRTXSADR DRCMR3
+#define DRCMRRXBTRBR DRCMR4
+#define DRCMRTXBTTHR DRCMR5
+#define DRCMRRXFFRBR DRCMR6
+#define DRCMRTXFFTHR DRCMR7
+#define DRCMRRXMCDR DRCMR8
+#define DRCMRRXMODR DRCMR9
+#define DRCMRTXMODR DRCMR10
+#define DRCMRRXPCDR DRCMR11
+#define DRCMRTXPCDR DRCMR12
+#define DRCMRRXSSDR DRCMR13
+#define DRCMRTXSSDR DRCMR14
+#define DRCMRRXICDR DRCMR17
+#define DRCMRTXICDR DRCMR18
+#define DRCMRRXSTRBR DRCMR19
+#define DRCMRTXSTTHR DRCMR20
+#define DRCMRRXMMC DRCMR21
+#define DRCMRTXMMC DRCMR22
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */
+
+#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
+#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
+#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
+#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
+#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
+#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
+#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
+#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
+#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
+#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
+#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
+#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
+#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
+#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
+#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
+#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
+#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
+#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
+#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
+#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
+#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
+#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
+#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
+#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
+#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
+#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
+#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
+#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
+#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
+#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
+#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
+#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
+#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
+#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
+#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
+#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
+#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
+#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
+#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
+#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
+#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
+#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
+#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
+#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
+#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
+#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
+#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
+#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x) __REG2(0x40000200, (x) << 4)
+#define DSADR(x) __REG2(0x40000204, (x) << 4)
+#define DTADR(x) __REG2(0x40000208, (x) << 4)
+#define DCMD(x) __REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/* default combinations */
+#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4) */
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define IrSR_OFFSET 0x20
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6 (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_IR_MODE | \
+ IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_UART_MODE | \
+ IrSR_XMITIR_IR_MODE)
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
+#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
+#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
+#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
+#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+
+/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these
+ * short defines because there is too much chance of namespace collision */
+
+/*#define SACR0 __REG(0x40400000) / Global Control Register */
+/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */
+/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */
+/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */
+/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */
+/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */
+
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+
+/*
+ * USB Device Controller
+ */
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
+#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
+#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
+#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
+#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
+#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
+#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
+#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
+#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
+#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
+#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
+#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
+#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
+#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
+#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
+#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
+#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
+#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
+#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
+#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
+#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
+#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
+#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
+#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
+#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
+#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
+#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
+#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
+#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
+#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
+#define ICDR __REG(0x4080000c) /* ICP Data Register */
+#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
+#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
+#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
+#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST 1 /* reset */
+#define GPIO6_MMCCLK 6 /* MMC Clock */
+#define GPIO8_48MHz 7 /* 48 MHz clock output */
+#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */
+#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */
+#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */
+#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */
+#define GPIO12_32KHz 12 /* 32 kHz out */
+#define GPIO13_MBGNT 13 /* memory controller grant */
+#define GPIO14_MBREQ 14 /* alternate bus master request */
+#define GPIO15_nCS_1 15 /* chip select 1 */
+#define GPIO16_PWM0 16 /* PWM0 output */
+#define GPIO17_PWM1 17 /* PWM1 output */
+#define GPIO18_RDY 18 /* Ext. Bus Ready */
+#define GPIO19_DREQ1 19 /* External DMA Request */
+#define GPIO20_DREQ0 20 /* External DMA Request */
+#define GPIO23_SCLK 23 /* SSP clock */
+#define GPIO24_SFRM 24 /* SSP Frame */
+#define GPIO25_STXD 25 /* SSP transmit */
+#define GPIO26_SRXD 26 /* SSP receive */
+#define GPIO27_SEXTCLK 27 /* SSP ext_clk */
+#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */
+#define GPIO31_SYNC 31 /* AC97/I2S sync */
+#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */
+#define GPIO33_nCS_5 33 /* chip select 5 */
+#define GPIO34_FFRXD 34 /* FFUART receive */
+#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */
+#define GPIO35_FFCTS 35 /* FFUART Clear to send */
+#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */
+#define GPIO37_FFDSR 37 /* FFUART data set ready */
+#define GPIO38_FFRI 38 /* FFUART Ring Indicator */
+#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */
+#define GPIO39_FFTXD 39 /* FFUART transmit data */
+#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */
+#define GPIO41_FFRTS 41 /* FFUART request to send */
+#define GPIO42_BTRXD 42 /* BTUART receive data */
+#define GPIO43_BTTXD 43 /* BTUART transmit data */
+#define GPIO44_BTCTS 44 /* BTUART clear to send */
+#define GPIO45_BTRTS 45 /* BTUART request to send */
+#define GPIO46_ICPRXD 46 /* ICP receive data */
+#define GPIO46_STRXD 46 /* STD_UART receive data */
+#define GPIO47_ICPTXD 47 /* ICP transmit data */
+#define GPIO47_STTXD 47 /* STD_UART transmit data */
+#define GPIO48_nPOE 48 /* Output Enable for Card Space */
+#define GPIO49_nPWE 49 /* Write Enable for Card Space */
+#define GPIO50_nPIOR 50 /* I/O Read for Card Space */
+#define GPIO51_nPIOW 51 /* I/O Write for Card Space */
+#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */
+#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */
+#define GPIO53_MMCCLK 53 /* MMC Clock */
+#define GPIO54_MMCCLK 54 /* MMC Clock */
+#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */
+#define GPIO55_nPREG 55 /* Card Address bit 26 */
+#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */
+#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0 58 /* LCD data pin 0 */
+#define GPIO59_LDD_1 59 /* LCD data pin 1 */
+#define GPIO60_LDD_2 60 /* LCD data pin 2 */
+#define GPIO61_LDD_3 61 /* LCD data pin 3 */
+#define GPIO62_LDD_4 62 /* LCD data pin 4 */
+#define GPIO63_LDD_5 63 /* LCD data pin 5 */
+#define GPIO64_LDD_6 64 /* LCD data pin 6 */
+#define GPIO65_LDD_7 65 /* LCD data pin 7 */
+#define GPIO66_LDD_8 66 /* LCD data pin 8 */
+#define GPIO66_MBREQ 66 /* alternate bus master req */
+#define GPIO67_LDD_9 67 /* LCD data pin 9 */
+#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */
+#define GPIO68_LDD_10 68 /* LCD data pin 10 */
+#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */
+#define GPIO69_LDD_11 69 /* LCD data pin 11 */
+#define GPIO69_MMCCLK 69 /* MMC_CLK */
+#define GPIO70_LDD_12 70 /* LCD data pin 12 */
+#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13 71 /* LCD data pin 13 */
+#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14 72 /* LCD data pin 14 */
+#define GPIO72_32kHz 72 /* 32 kHz clock */
+#define GPIO73_LDD_15 73 /* LCD data pin 15 */
+#define GPIO73_MBGNT 73 /* Memory controller grant */
+#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */
+#define GPIO75_LCD_LCLK 75 /* LCD line clock */
+#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */
+#define GPIO78_nCS_2 78 /* chip select 2 */
+#define GPIO79_nCS_3 79 /* chip select 3 */
+#define GPIO80_nCS_4 80 /* chip select 4 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN 0x000
+#define GPIO_OUT 0x080
+#define GPIO_ALT_FN_1_IN 0x100
+#define GPIO_ALT_FN_1_OUT 0x180
+#define GPIO_ALT_FN_2_IN 0x200
+#define GPIO_ALT_FN_2_OUT 0x280
+#define GPIO_ALT_FN_3_IN 0x300
+#define GPIO_ALT_FN_3_OUT 0x380
+#define GPIO_MD_MASK_NR 0x07f
+#define GPIO_MD_MASK_DIR 0x080
+#define GPIO_MD_MASK_FN 0x300
+
+#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT)
+#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT)
+#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN)
+#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN)
+#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT)
+#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN)
+#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN)
+#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT)
+#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN)
+#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
+#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
+#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT)
+#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
+#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+
+/*
+ * SSP Serial Port Registers
+ */
+
+#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */
+#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */
+#define SSSR __REG(0x41000008) /* SSP Status Register */
+#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */
+#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+
+
+/*
+ * MultiMediaCard (MMC) controller
+ */
+
+#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */
+#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */
+#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */
+#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */
+#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */
+#define MMC_RESTO __REG(0x41100014) /* Expected response time out */
+#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */
+#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */
+#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */
+#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */
+#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */
+#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */
+#define MMC_CMD __REG(0x41100030) /* Index of current command */
+#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */
+#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */
+#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */
+#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */
+#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */
+
+
+/*
+ * Core Clock
+ */
+
+#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
+#define CKEN __REG(0x41300004) /* Clock Enable Register */
+#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */
+#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */
+#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
+#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
+#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
+#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */
+#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
+#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
+#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
+#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */
+#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */
+#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+#define CCCR_L09 (0x1F)
+#define CCCR_L27 (0x1)
+#define CCCR_L32 (0x2)
+#define CCCR_L36 (0x3)
+#define CCCR_L40 (0x4)
+#define CCCR_L45 (0x5)
+
+#define CCCR_M1 (0x1 << 5)
+#define CCCR_M2 (0x2 << 5)
+#define CCCR_M4 (0x3 << 5)
+
+#define CCCR_N10 (0x2 << 7)
+#define CCCR_N15 (0x3 << 7)
+#define CCCR_N20 (0x4 << 7)
+#define CCCR_N25 (0x5 << 7)
+#define CCCR_N30 (0x6 << 7)
+
+/*
+ * LCD
+ */
+
+#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */
+#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */
+#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */
+#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */
+#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
+#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
+#define LCSR __REG(0x44000038) /* LCD Controller Status Register */
+#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */
+#define TMEDCR __REG(0x44000044) /* TMED Control Register */
+
+#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */
+#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */
+#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */
+#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */
+
+#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
+#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */
+#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */
+#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
+#define LCCR0_SFM (1 << 4) /* Start of frame mask */
+#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
+#define LCCR0_EFM (1 << 6) /* End of Frame mask */
+#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */
+#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */
+#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
+#define LCCR0_DIS (1 << 10) /* LCD Disable */
+#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
+#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
+#define LCCR0_PDD_S 12
+#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
+
+#define LCCR3_PCD (0xff) /* Pixel clock divisor */
+#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */
+#define LCCR3_ACB_S 8
+#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S 16
+#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
+#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
+#define LCCR3_PCP (1 << 22) /* pixel clock polarity */
+#define LCCR3_OEP (1 << 23) /* output enable polarity */
+#define LCCR3_BPP (7 << 24) /* bits per pixel */
+#define LCCR3_BPP_S 24
+#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
+
+#define LCSR_LDD (1 << 0) /* LCD Disable Done */
+#define LCSR_SOF (1 << 1) /* Start of frame */
+#define LCSR_BER (1 << 2) /* Bus error */
+#define LCSR_ABC (1 << 3) /* AC Bias count */
+#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
+#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
+#define LCSR_OU (1 << 6) /* output FIFO underrun */
+#define LCSR_QD (1 << 7) /* quick disable */
+#define LCSR_EOF (1 << 8) /* end of frame */
+#define LCSR_BS (1 << 9) /* branch status */
+#define LCSR_SINT (1 << 10) /* subsequent interrupt */
+
+#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+
+/*
+ * Memory controller
+ */
+
+#define MEMC_BASE __REG(0x48000000) /* Base of Memoriy Controller */
+#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
+#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
+#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
+#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
+#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
+#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+#define MDCNFG_DE0 0x00000001
+#define MDCNFG_DE1 0x00000002
+#define MDCNFG_DE2 0x00010000
+#define MDCNFG_DE3 0x00020000
+#define MDCNFG_DWID0 0x00000004
+
+#define MDREFR_E0PIN 0x00001000
+#define MDREFR_K0RUN 0x00002000
+#define MDREFR_K0DB2 0x00004000
+#define MDREFR_E1PIN 0x00008000
+#define MDREFR_K1RUN 0x00010000
+#define MDREFR_K1DB2 0x00020000
+#define MDREFR_K2RUN 0x00040000
+#define MDREFR_K2DB2 0x00080000
+#define MDREFR_APD 0x00100000
+#define MDREFR_SLFRSH 0x00400000
+#define MDREFR_K0FREE 0x00800000
+#define MDREFR_K1FREE 0x01000000
+#define MDREFR_K2FREE 0x02000000
+
+#define MDCNFG_OFFSET 0x0
+#define MDREFR_OFFSET 0x4
+#define MSC0_OFFSET 0x8
+#define MSC1_OFFSET 0xC
+#define MSC2_OFFSET 0x10
+#define MECR_OFFSET 0x14
+#define SXLCR_OFFSET 0x18
+#define SXCNFG_OFFSET 0x1C
+#define FLYCNFG_OFFSET 0x20
+#define SXMRS_OFFSET 0x24
+#define MCMEM0_OFFSET 0x28
+#define MCMEM1_OFFSET 0x2C
+#define MCATT0_OFFSET 0x30
+#define MCATT1_OFFSET 0x34
+#define MCIO0_OFFSET 0x38
+#define MCIO1_OFFSET 0x3C
+#define MDMRS_OFFSET 0x40
+
+
+
+
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/pxa-regs.h
+ *
+ * Author: Nicolas Pitre
+ * Created: Jun 15, 2001
+ * Copyright: MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* FIXME hack so that SA-1111.h will work [cb] */
+
+#ifndef __ASSEMBLY__
+typedef unsigned short Word16 ;
+typedef unsigned int Word32 ;
+typedef Word32 Word ;
+typedef Word Quad [4] ;
+typedef void *Address ;
+typedef void (*ExcpHndlr) (void) ;
+#endif
+
+#ifndef __ASSEMBLY__
+#define io_p2v(PhAdd) (PhAdd)
+#define __REG(x) (*((volatile u32 *)io_p2v(x)))
+#else
+#define __REG(x) (x)
+#endif
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS 0x00000000
+#define PXA_CS1_PHYS 0x04000000
+#define PXA_CS2_PHYS 0x08000000
+#define PXA_CS3_PHYS 0x0C000000
+#define PXA_CS4_PHYS 0x10000000
+#define PXA_CS5_PHYS 0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */
+#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */
+#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */
+#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */
+#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */
+
+#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */
+#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */
+#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */
+
+#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */
+#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */
+#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */
+
+#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \
+ (0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */
+#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \
+ (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \
+ (_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */
+#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */
+#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */
+#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */
+
+#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */
+#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */
+#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */
+#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */
+#define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */
+#define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */
+#define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */
+#define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */
+#define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */
+#define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */
+#define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */
+#define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */
+#define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */
+#define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */
+#define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */
+#define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */
+#define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */
+#define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */
+#define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x) __REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#define DINT __REG(0x400000f0) /* DMA Interrupt Register */
+
+#define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15 __REG(0x4000013c) /* Reserved */
+#define DRCMR16 __REG(0x40000140) /* Reserved */
+#define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23 __REG(0x4000015c) /* Reserved */
+#define DRCMR24 __REG(0x40000160) /* Reserved */
+#define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29 __REG(0x40000174) /* Reserved */
+#define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34 __REG(0x40000188) /* Reserved */
+#define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39 __REG(0x4000019C) /* Reserved */
+
+#define DRCMRRXSADR DRCMR2
+#define DRCMRTXSADR DRCMR3
+#define DRCMRRXBTRBR DRCMR4
+#define DRCMRTXBTTHR DRCMR5
+#define DRCMRRXFFRBR DRCMR6
+#define DRCMRTXFFTHR DRCMR7
+#define DRCMRRXMCDR DRCMR8
+#define DRCMRRXMODR DRCMR9
+#define DRCMRTXMODR DRCMR10
+#define DRCMRRXPCDR DRCMR11
+#define DRCMRTXPCDR DRCMR12
+#define DRCMRRXSSDR DRCMR13
+#define DRCMRTXSSDR DRCMR14
+#define DRCMRRXICDR DRCMR17
+#define DRCMRTXICDR DRCMR18
+#define DRCMRRXSTRBR DRCMR19
+#define DRCMRTXSTTHR DRCMR20
+#define DRCMRRXMMC DRCMR21
+#define DRCMRTXMMC DRCMR22
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */
+
+#define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */
+#define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */
+#define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */
+#define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */
+#define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */
+#define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */
+#define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */
+#define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */
+#define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */
+#define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */
+#define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */
+#define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */
+#define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */
+#define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */
+#define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */
+#define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */
+#define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */
+#define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */
+#define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */
+#define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */
+#define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */
+#define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */
+#define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */
+#define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */
+#define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */
+#define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */
+#define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */
+#define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */
+#define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */
+#define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */
+#define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */
+#define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */
+#define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */
+#define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */
+#define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */
+#define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */
+#define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */
+#define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */
+#define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */
+#define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */
+#define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */
+#define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */
+#define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */
+#define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */
+#define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */
+#define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */
+#define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */
+#define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x) __REG2(0x40000200, (x) << 4)
+#define DSADR(x) __REG2(0x40000204, (x) << 4)
+#define DTADR(x) __REG2(0x40000208, (x) << 4)
+#define DCMD(x) __REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/* default combinations */
+#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
+#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART FFRBR
+#define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */
+#define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */
+#define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */
+#define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */
+#define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */
+#define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */
+#define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */
+#define FFLSR __REG(0x40100014) /* Line Status Register (read only) */
+#define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */
+#define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */
+#define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */
+#define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART BTRBR
+#define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */
+#define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */
+#define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */
+#define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */
+#define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */
+#define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */
+#define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */
+#define BTLSR __REG(0x40200014) /* Line Status Register (read only) */
+#define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */
+#define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */
+#define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */
+#define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART STRBR
+#define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */
+#define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */
+#define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */
+#define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */
+#define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */
+#define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */
+#define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */
+#define STLSR __REG(0x40700014) /* Line Status Register (read only) */
+#define STMSR __REG(0x40700018) /* Reserved */
+#define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */
+#define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */
+#define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE (1 << 7) /* DMA Requests Enable */
+#define IER_UUE (1 << 6) /* UART Unit Enable */
+#define IER_NRZE (1 << 5) /* NRZ coding Enable */
+#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
+#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
+#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
+#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
+#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
+#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
+#define IIR_TOD (1 << 3) /* Time Out Detected */
+#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
+#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
+#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
+
+#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
+#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
+#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
+#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
+#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1 (0)
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
+#define LCR_SB (1 << 6) /* Set Break */
+#define LCR_STKYP (1 << 5) /* Sticky Parity */
+#define LCR_EPS (1 << 4) /* Even Parity Select */
+#define LCR_PEN (1 << 3) /* Parity Enable */
+#define LCR_STB (1 << 2) /* Stop Bit */
+#define LCR_WLS1 (1 << 1) /* Word Length Select */
+#define LCR_WLS0 (1 << 0) /* Word Length Select */
+
+#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
+#define LSR_TEMT (1 << 6) /* Transmitter Empty */
+#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
+#define LSR_BI (1 << 4) /* Break Interrupt */
+#define LSR_FE (1 << 3) /* Framing Error */
+#define LSR_PE (1 << 2) /* Parity Error */
+#define LSR_OE (1 << 1) /* Overrun Error */
+#define LSR_DR (1 << 0) /* Data Ready */
+
+#define MCR_LOOP (1 << 4) */
+#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
+#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
+#define MCR_RTS (1 << 1) /* Request to Send */
+#define MCR_DTR (1 << 0) /* Data Terminal Ready */
+
+#define MSR_DCD (1 << 7) /* Data Carrier Detect */
+#define MSR_RI (1 << 6) /* Ring Indicator */
+#define MSR_DSR (1 << 5) /* Data Set Ready */
+#define MSR_CTS (1 << 4) /* Clear To Send */
+#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
+#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
+#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
+#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define IrSR_OFFSET 0x20
+
+#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
+#define IrSR_RXPL_POS_IS_ZERO 0x0
+#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
+#define IrSR_TXPL_POS_IS_ZERO 0x0
+#define IrSR_XMODE_PULSE_1_6 (1<<2)
+#define IrSR_XMODE_PULSE_3_16 0x0
+#define IrSR_RCVEIR_IR_MODE (1<<1)
+#define IrSR_RCVEIR_UART_MODE 0x0
+#define IrSR_XMITIR_IR_MODE (1<<0)
+#define IrSR_XMITIR_UART_MODE 0x0
+
+#define IrSR_IR_RECEIVE_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_IR_MODE | \
+ IrSR_XMITIR_UART_MODE)
+
+#define IrSR_IR_TRANSMIT_ON (\
+ IrSR_RXPL_NEG_IS_ZERO | \
+ IrSR_TXPL_POS_IS_ZERO | \
+ IrSR_XMODE_PULSE_3_16 | \
+ IrSR_RCVEIR_UART_MODE | \
+ IrSR_XMITIR_IR_MODE)
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */
+#define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */
+#define ICR __REG(0x40301690) /* I2C Control Register - ICR */
+#define ISR __REG(0x40301698) /* I2C Status Register - ISR */
+#define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+
+/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these
+ * short defines because there is too much chance of namespace collision */
+
+/*#define SACR0 __REG(0x40400000) / Global Control Register */
+/*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */
+/*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+/*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */
+/*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */
+/*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */
+/*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */
+
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR __REG(0x40500000) /* PCM Out Control Register */
+#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+
+#define PICR __REG(0x40500004) /* PCM In Control Register */
+#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+
+#define MCCR __REG(0x40500008) /* Mic In Control Register */
+#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */
+
+#define GCR __REG(0x4050000C) /* Global Control Register */
+#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */
+#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */
+#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */
+#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */
+
+#define POSR __REG(0x40500010) /* PCM Out Status Register */
+#define POSR_FIFOE (1 << 4) /* FIFO error */
+
+#define PISR __REG(0x40500014) /* PCM In Status Register */
+#define PISR_FIFOE (1 << 4) /* FIFO error */
+
+#define MCSR __REG(0x40500018) /* Mic In Status Register */
+#define MCSR_FIFOE (1 << 4) /* FIFO error */
+
+#define GSR __REG(0x4050001C) /* Global Status Register */
+#define GSR_CDONE (1 << 19) /* Command Done */
+#define GSR_SDONE (1 << 18) /* Status Done */
+#define GSR_RDCS (1 << 15) /* Read Completion Status */
+#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */
+#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */
+#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */
+#define GSR_SCR (1 << 9) /* Secondary Codec Ready */
+#define GSR_PCR (1 << 8) /* Primary Codec Ready */
+#define GSR_MINT (1 << 7) /* Mic In Interrupt */
+#define GSR_POINT (1 << 6) /* PCM Out Interrupt */
+#define GSR_PIINT (1 << 5) /* PCM In Interrupt */
+#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */
+#define GSR_MIINT (1 << 1) /* Modem In Interrupt */
+#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */
+
+#define CAR __REG(0x40500020) /* CODEC Access Register */
+#define CAR_CAIP (1 << 0) /* Codec Access In Progress */
+
+#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */
+#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */
+
+#define MOCR __REG(0x40500100) /* Modem Out Control Register */
+#define MOCR_FEIE (1 << 3) /* FIFO Error */
+
+#define MICR __REG(0x40500108) /* Modem In Control Register */
+#define MICR_FEIE (1 << 3) /* FIFO Error */
+
+#define MOSR __REG(0x40500110) /* Modem Out Status Register */
+#define MOSR_FIFOE (1 << 4) /* FIFO error */
+
+#define MISR __REG(0x40500118) /* Modem In Status Register */
+#define MISR_FIFOE (1 << 4) /* FIFO error */
+
+#define MODR __REG(0x40500140) /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */
+#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */
+#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
+#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
+
+/*
+ * USB Device Controller
+ */
+
+#define UDCCR __REG(0x40600000) /* UDC Control Register */
+#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
+#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
+#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
+#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
+#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
+#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
+#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
+#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
+#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
+#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
+#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
+#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
+#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
+#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
+#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
+#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
+#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
+#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
+#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
+#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
+#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
+#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
+#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
+#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
+#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
+#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
+#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
+#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */
+#define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */
+#define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */
+#define ICDR __REG(0x4080000c) /* ICP Data Register */
+#define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */
+#define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR __REG(0x40900000) /* RTC Count Register */
+#define RTAR __REG(0x40900004) /* RTC Alarm Register */
+#define RTSR __REG(0x40900008) /* RTC Status Register */
+#define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */
+
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0 __REG(0x40A00000) /* */
+#define OSMR1 __REG(0x40A00004) /* */
+#define OSMR2 __REG(0x40A00008) /* */
+#define OSMR3 __REG(0x40A0000C) /* */
+#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
+#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
+#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3 (1 << 3) /* Match status channel 3 */
+#define OSSR_M2 (1 << 2) /* Match status channel 2 */
+#define OSSR_M1 (1 << 1) /* Match status channel 1 */
+#define OSSR_M0 (1 << 0) /* Match status channel 0 */
+
+#define OWER_WME (1 << 0) /* Watchdog Match Enable */
+
+#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */
+#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */
+#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */
+#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */
+#define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */
+#define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */
+#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */
+#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */
+#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
+#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
+#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */
+
+/* More handy macros. The argument is a literal GPIO number. */
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+#define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST 1 /* reset */
+#define GPIO6_MMCCLK 6 /* MMC Clock */
+#define GPIO8_48MHz 7 /* 48 MHz clock output */
+#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */
+#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */
+#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */
+#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */
+#define GPIO12_32KHz 12 /* 32 kHz out */
+#define GPIO13_MBGNT 13 /* memory controller grant */
+#define GPIO14_MBREQ 14 /* alternate bus master request */
+#define GPIO15_nCS_1 15 /* chip select 1 */
+#define GPIO16_PWM0 16 /* PWM0 output */
+#define GPIO17_PWM1 17 /* PWM1 output */
+#define GPIO18_RDY 18 /* Ext. Bus Ready */
+#define GPIO19_DREQ1 19 /* External DMA Request */
+#define GPIO20_DREQ0 20 /* External DMA Request */
+#define GPIO23_SCLK 23 /* SSP clock */
+#define GPIO24_SFRM 24 /* SSP Frame */
+#define GPIO25_STXD 25 /* SSP transmit */
+#define GPIO26_SRXD 26 /* SSP receive */
+#define GPIO27_SEXTCLK 27 /* SSP ext_clk */
+#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */
+#define GPIO31_SYNC 31 /* AC97/I2S sync */
+#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */
+#define GPIO33_nCS_5 33 /* chip select 5 */
+#define GPIO34_FFRXD 34 /* FFUART receive */
+#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */
+#define GPIO35_FFCTS 35 /* FFUART Clear to send */
+#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */
+#define GPIO37_FFDSR 37 /* FFUART data set ready */
+#define GPIO38_FFRI 38 /* FFUART Ring Indicator */
+#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */
+#define GPIO39_FFTXD 39 /* FFUART transmit data */
+#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */
+#define GPIO41_FFRTS 41 /* FFUART request to send */
+#define GPIO42_BTRXD 42 /* BTUART receive data */
+#define GPIO43_BTTXD 43 /* BTUART transmit data */
+#define GPIO44_BTCTS 44 /* BTUART clear to send */
+#define GPIO45_BTRTS 45 /* BTUART request to send */
+#define GPIO46_ICPRXD 46 /* ICP receive data */
+#define GPIO46_STRXD 46 /* STD_UART receive data */
+#define GPIO47_ICPTXD 47 /* ICP transmit data */
+#define GPIO47_STTXD 47 /* STD_UART transmit data */
+#define GPIO48_nPOE 48 /* Output Enable for Card Space */
+#define GPIO49_nPWE 49 /* Write Enable for Card Space */
+#define GPIO50_nPIOR 50 /* I/O Read for Card Space */
+#define GPIO51_nPIOW 51 /* I/O Write for Card Space */
+#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */
+#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */
+#define GPIO53_MMCCLK 53 /* MMC Clock */
+#define GPIO54_MMCCLK 54 /* MMC Clock */
+#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */
+#define GPIO55_nPREG 55 /* Card Address bit 26 */
+#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */
+#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0 58 /* LCD data pin 0 */
+#define GPIO59_LDD_1 59 /* LCD data pin 1 */
+#define GPIO60_LDD_2 60 /* LCD data pin 2 */
+#define GPIO61_LDD_3 61 /* LCD data pin 3 */
+#define GPIO62_LDD_4 62 /* LCD data pin 4 */
+#define GPIO63_LDD_5 63 /* LCD data pin 5 */
+#define GPIO64_LDD_6 64 /* LCD data pin 6 */
+#define GPIO65_LDD_7 65 /* LCD data pin 7 */
+#define GPIO66_LDD_8 66 /* LCD data pin 8 */
+#define GPIO66_MBREQ 66 /* alternate bus master req */
+#define GPIO67_LDD_9 67 /* LCD data pin 9 */
+#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */
+#define GPIO68_LDD_10 68 /* LCD data pin 10 */
+#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */
+#define GPIO69_LDD_11 69 /* LCD data pin 11 */
+#define GPIO69_MMCCLK 69 /* MMC_CLK */
+#define GPIO70_LDD_12 70 /* LCD data pin 12 */
+#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13 71 /* LCD data pin 13 */
+#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14 72 /* LCD data pin 14 */
+#define GPIO72_32kHz 72 /* 32 kHz clock */
+#define GPIO73_LDD_15 73 /* LCD data pin 15 */
+#define GPIO73_MBGNT 73 /* Memory controller grant */
+#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */
+#define GPIO75_LCD_LCLK 75 /* LCD line clock */
+#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */
+#define GPIO78_nCS_2 78 /* chip select 2 */
+#define GPIO79_nCS_3 79 /* chip select 3 */
+#define GPIO80_nCS_4 80 /* chip select 4 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN 0x000
+#define GPIO_OUT 0x080
+#define GPIO_ALT_FN_1_IN 0x100
+#define GPIO_ALT_FN_1_OUT 0x180
+#define GPIO_ALT_FN_2_IN 0x200
+#define GPIO_ALT_FN_2_OUT 0x280
+#define GPIO_ALT_FN_3_IN 0x300
+#define GPIO_ALT_FN_3_OUT 0x380
+#define GPIO_MD_MASK_NR 0x07f
+#define GPIO_MD_MASK_DIR 0x080
+#define GPIO_MD_MASK_FN 0x300
+
+#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT)
+#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT)
+#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN)
+#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN)
+#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT)
+#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN)
+#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN)
+#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT)
+#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN)
+#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT)
+#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN)
+#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT)
+#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT)
+#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT)
+#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT)
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR __REG(0x40F00000) /* Power Manager Control Register */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */
+#define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */
+#define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */
+#define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */
+#define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define RCSR __REG(0x40F00030) /* Reset Controller Status Register */
+
+
+/*
+ * SSP Serial Port Registers
+ */
+
+#define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */
+#define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */
+#define SSSR __REG(0x41000008) /* SSP Status Register */
+#define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */
+#define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */
+
+
+/*
+ * MultiMediaCard (MMC) controller
+ */
+
+#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */
+#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */
+#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */
+#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */
+#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */
+#define MMC_RESTO __REG(0x41100014) /* Expected response time out */
+#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */
+#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */
+#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */
+#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */
+#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */
+#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */
+#define MMC_CMD __REG(0x41100030) /* Index of current command */
+#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */
+#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */
+#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */
+#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */
+#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */
+
+
+/*
+ * Core Clock
+ */
+
+#define CCCR __REG(0x41300000) /* Core Clock Configuration Register */
+#define CKEN __REG(0x41300004) /* Clock Enable Register */
+#define OSCC __REG(0x41300008) /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */
+#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */
+#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */
+#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */
+#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */
+#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */
+#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */
+#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */
+#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */
+#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */
+#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */
+#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */
+#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */
+
+#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */
+
+#define CCCR_L09 (0x1F)
+#define CCCR_L27 (0x1)
+#define CCCR_L32 (0x2)
+#define CCCR_L36 (0x3)
+#define CCCR_L40 (0x4)
+#define CCCR_L45 (0x5)
+
+#define CCCR_M1 (0x1 << 5)
+#define CCCR_M2 (0x2 << 5)
+#define CCCR_M4 (0x3 << 5)
+
+#define CCCR_N10 (0x2 << 7)
+#define CCCR_N15 (0x3 << 7)
+#define CCCR_N20 (0x4 << 7)
+#define CCCR_N25 (0x5 << 7)
+#define CCCR_N30 (0x6 << 7)
+
+/*
+ * LCD
+ */
+
+#define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */
+#define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */
+#define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */
+#define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */
+#define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */
+#define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */
+#define LCSR __REG(0x44000038) /* LCD Controller Status Register */
+#define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */
+#define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */
+#define TMEDCR __REG(0x44000044) /* TMED Control Register */
+
+#define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */
+#define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */
+#define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */
+#define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */
+#define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */
+#define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */
+
+#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
+#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */
+#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */
+#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */
+#define LCCR0_SFM (1 << 4) /* Start of frame mask */
+#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */
+#define LCCR0_EFM (1 << 6) /* End of Frame mask */
+#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */
+#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */
+#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
+#define LCCR0_DIS (1 << 10) /* LCD Disable */
+#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
+#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
+#define LCCR0_PDD_S 12
+#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
+
+#define LCCR3_PCD (0xff) /* Pixel clock divisor */
+#define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */
+#define LCCR3_ACB_S 8
+#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S 16
+#define LCCR3_VSP (1 << 20) /* vertical sync polarity */
+#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */
+#define LCCR3_PCP (1 << 22) /* pixel clock polarity */
+#define LCCR3_OEP (1 << 23) /* output enable polarity */
+#define LCCR3_BPP (7 << 24) /* bits per pixel */
+#define LCCR3_BPP_S 24
+#define LCCR3_DPC (1 << 27) /* double pixel clock mode */
+
+#define LCSR_LDD (1 << 0) /* LCD Disable Done */
+#define LCSR_SOF (1 << 1) /* Start of frame */
+#define LCSR_BER (1 << 2) /* Bus error */
+#define LCSR_ABC (1 << 3) /* AC Bias count */
+#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */
+#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */
+#define LCSR_OU (1 << 6) /* output FIFO underrun */
+#define LCSR_QD (1 << 7) /* quick disable */
+#define LCSR_EOF (1 << 8) /* end of frame */
+#define LCSR_BS (1 << 9) /* branch status */
+#define LCSR_SINT (1 << 10) /* subsequent interrupt */
+
+#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+
+/*
+ * Memory controller
+ */
+
+#define MEMC_BASE __REG(0x48000000) /* Base of Memoriy Controller */
+#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
+#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
+#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
+#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
+#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
+#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
+#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
+#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+#define MDCNFG_DE0 0x00000001
+#define MDCNFG_DE1 0x00000002
+#define MDCNFG_DE2 0x00010000
+#define MDCNFG_DE3 0x00020000
+#define MDCNFG_DWID0 0x00000004
+
+#define MDREFR_E0PIN 0x00001000
+#define MDREFR_K0RUN 0x00002000
+#define MDREFR_K0DB2 0x00004000
+#define MDREFR_E1PIN 0x00008000
+#define MDREFR_K1RUN 0x00010000
+#define MDREFR_K1DB2 0x00020000
+#define MDREFR_K2RUN 0x00040000
+#define MDREFR_K2DB2 0x00080000
+#define MDREFR_APD 0x00100000
+#define MDREFR_SLFRSH 0x00400000
+#define MDREFR_K0FREE 0x00800000
+#define MDREFR_K1FREE 0x01000000
+#define MDREFR_K2FREE 0x02000000
+
+#define MDCNFG_OFFSET 0x0
+#define MDREFR_OFFSET 0x4
+#define MSC0_OFFSET 0x8
+#define MSC1_OFFSET 0xC
+#define MSC2_OFFSET 0x10
+#define MECR_OFFSET 0x14
+#define SXLCR_OFFSET 0x18
+#define SXCNFG_OFFSET 0x1C
+#define FLYCNFG_OFFSET 0x20
+#define SXMRS_OFFSET 0x24
+#define MCMEM0_OFFSET 0x28
+#define MCMEM1_OFFSET 0x2C
+#define MCATT0_OFFSET 0x30
+#define MCATT1_OFFSET 0x34
+#define MCIO0_OFFSET 0x38
+#define MCIO1_OFFSET 0x3C
+#define MDMRS_OFFSET 0x40
+
+
+
+
--- /dev/null
+/*----------------------------------------------------------------------------+
+|
+| This source code has been made available to you by IBM on an AS-IS
+| basis. Anyone receiving this source is licensed under IBM
+| copyrights to use it in any way he or she deems fit, including
+| copying it, modifying it, compiling it, and redistributing it either
+| with or without modifications. No license under IBM patents or
+| patent applications is to be implied by the copyright license.
+|
+| Any user of this software should understand that IBM cannot provide
+| technical support for this software and will not be responsible for
+| any consequences resulting from the use of this software.
+|
+| Any person who transfers this source code or any derivative work
+| must include the IBM copyright notice, this paragraph, and the
+| preceding two paragraphs in the transferred software.
+|
+| COPYRIGHT I B M CORPORATION 1999
+| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
++----------------------------------------------------------------------------*/
+
+#ifndef __PPC405_H__
+#define __PPC405_H__
+
+/*--------------------------------------------------------------------- */
+/* Special Purpose Registers */
+/*--------------------------------------------------------------------- */
+ #define srr2 0x3de /* save/restore register 2 */
+ #define srr3 0x3df /* save/restore register 3 */
+ #define dbsr 0x3f0 /* debug status register */
+ #define dbcr0 0x3f2 /* debug control register 0 */
+ #define dbcr1 0x3bd /* debug control register 1 */
+ #define iac1 0x3f4 /* instruction address comparator 1 */
+ #define iac2 0x3f5 /* instruction address comparator 2 */
+ #define iac3 0x3b4 /* instruction address comparator 3 */
+ #define iac4 0x3b5 /* instruction address comparator 4 */
+ #define dac1 0x3f6 /* data address comparator 1 */
+ #define dac2 0x3f7 /* data address comparator 2 */
+ #define dccr 0x3fa /* data cache control register */
+ #define iccr 0x3fb /* instruction cache control register */
+ #define esr 0x3d4 /* execption syndrome register */
+ #define dear 0x3d5 /* data exeption address register */
+ #define evpr 0x3d6 /* exeption vector prefix register */
+ #define tsr 0x3d8 /* timer status register */
+ #define tcr 0x3da /* timer control register */
+ #define pit 0x3db /* programmable interval timer */
+ #define sgr 0x3b9 /* storage guarded reg */
+ #define dcwr 0x3ba /* data cache write-thru reg*/
+ #define sler 0x3bb /* storage little-endian reg */
+ #define cdbcr 0x3d7 /* cache debug cntrl reg */
+ #define icdbdr 0x3d3 /* instr cache dbug data reg*/
+ #define ccr0 0x3b3 /* core configuration register */
+ #define dvc1 0x3b6 /* data value compare register 1 */
+ #define dvc2 0x3b7 /* data value compare register 2 */
+ #define pid 0x3b1 /* process ID */
+ #define su0r 0x3bc /* storage user-defined register 0 */
+ #define zpr 0x3b0 /* zone protection regsiter */
+
+ #define tbl 0x11c /* time base lower - privileged write */
+ #define tbu 0x11d /* time base upper - privileged write */
+
+ #define sprg4r 0x104 /* Special purpose general 4 - read only */
+ #define sprg5r 0x105 /* Special purpose general 5 - read only */
+ #define sprg6r 0x106 /* Special purpose general 6 - read only */
+ #define sprg7r 0x107 /* Special purpose general 7 - read only */
+ #define sprg4w 0x114 /* Special purpose general 4 - write only */
+ #define sprg5w 0x115 /* Special purpose general 5 - write only */
+ #define sprg6w 0x116 /* Special purpose general 6 - write only */
+ #define sprg7w 0x117 /* Special purpose general 7 - write only */
+
+/******************************************************************************
+ * Special for PPC405GP
+ ******************************************************************************/
+
+/******************************************************************************
+ * DMA
+ ******************************************************************************/
+#define DMA_DCR_BASE 0x100
+#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
+#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
+#define dmada0 (DMA_DCR_BASE+0x02) /* DMA destination address register 0 */
+#define dmasa0 (DMA_DCR_BASE+0x03) /* DMA source address register 0 */
+#define dmasb0 (DMA_DCR_BASE+0x04) /* DMA scatter/gather descriptor addr 0 */
+#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
+#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
+#define dmada1 (DMA_DCR_BASE+0x0a) /* DMA destination address register 1 */
+#define dmasa1 (DMA_DCR_BASE+0x0b) /* DMA source address register 1 */
+#define dmasb1 (DMA_DCR_BASE+0x0c) /* DMA scatter/gather descriptor addr 1 */
+#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
+#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
+#define dmada2 (DMA_DCR_BASE+0x12) /* DMA destination address register 2 */
+#define dmasa2 (DMA_DCR_BASE+0x13) /* DMA source address register 2 */
+#define dmasb2 (DMA_DCR_BASE+0x14) /* DMA scatter/gather descriptor addr 2 */
+#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 3 */
+#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 3 */
+#define dmada3 (DMA_DCR_BASE+0x1a) /* DMA destination address register 3 */
+#define dmasa3 (DMA_DCR_BASE+0x1b) /* DMA source address register 3 */
+#define dmasb3 (DMA_DCR_BASE+0x1c) /* DMA scatter/gather descriptor addr 3 */
+#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
+#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
+#define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */
+
+/******************************************************************************
+ * Universal interrupt controller
+ ******************************************************************************/
+#define UIC_DCR_BASE 0xc0
+#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */
+#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */
+#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */
+#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */
+#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */
+#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */
+#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */
+#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */
+#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */
+
+/*-----------------------------------------------------------------------------+
+| Universal interrupt controller interrupts
++-----------------------------------------------------------------------------*/
+#define UIC_UART0 0x80000000 /* UART 0 */
+#define UIC_UART1 0x40000000 /* UART 1 */
+#define UIC_IIC 0x20000000 /* IIC */
+#define UIC_EXT_MAST 0x10000000 /* External Master */
+#define UIC_PCI 0x08000000 /* PCI write to command reg */
+#define UIC_DMA0 0x04000000 /* DMA chan. 0 */
+#define UIC_DMA1 0x02000000 /* DMA chan. 1 */
+#define UIC_DMA2 0x01000000 /* DMA chan. 2 */
+#define UIC_DMA3 0x00800000 /* DMA chan. 3 */
+#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */
+#define UIC_MAL_SERR 0x00200000 /* MAL SERR */
+#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */
+#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */
+#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */
+#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */
+#define UIC_ENET 0x00010000 /* Ethernet */
+#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */
+#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error */
+#define UIC_PCI_PM 0x00002000 /* PCI Power Management */
+#define UIC_EXT0 0x00000040 /* External interrupt 0 */
+#define UIC_EXT1 0x00000020 /* External interrupt 1 */
+#define UIC_EXT2 0x00000010 /* External interrupt 2 */
+#define UIC_EXT3 0x00000008 /* External interrupt 3 */
+#define UIC_EXT4 0x00000004 /* External interrupt 4 */
+#define UIC_EXT5 0x00000002 /* External interrupt 5 */
+#define UIC_EXT6 0x00000001 /* External interrupt 6 */
+
+/******************************************************************************
+ * SDRAM Controller
+ ******************************************************************************/
+#define SDRAM_DCR_BASE 0x10
+#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
+#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
+ /* values for memcfga register - indirect addressing of these regs */
+ #define mem_besra 0x00 /* bus error syndrome reg a */
+ #define mem_besrsa 0x04 /* bus error syndrome reg set a */
+ #define mem_besrb 0x08 /* bus error syndrome reg b */
+ #define mem_besrsb 0x0c /* bus error syndrome reg set b */
+ #define mem_bear 0x10 /* bus error address reg */
+ #define mem_mcopt1 0x20 /* memory controller options 1 */
+ #define mem_rtr 0x30 /* refresh timer reg */
+ #define mem_pmit 0x34 /* power management idle timer */
+ #define mem_mb0cf 0x40 /* memory bank 0 configuration */
+ #define mem_mb1cf 0x44 /* memory bank 1 configuration */
+ #define mem_mb2cf 0x48 /* memory bank 2 configuration */
+ #define mem_mb3cf 0x4c /* memory bank 3 configuration */
+ #define mem_sdtr1 0x80 /* timing reg 1 */
+ #define mem_ecccf 0x94 /* ECC configuration */
+ #define mem_eccerr 0x98 /* ECC error status */
+
+/******************************************************************************
+ * Decompression Controller
+ ******************************************************************************/
+#define DECOMP_DCR_BASE 0x14
+#define kiar (DECOMP_DCR_BASE+0x0) /* Decompression controller addr reg */
+#define kidr (DECOMP_DCR_BASE+0x1) /* Decompression controller data reg */
+ /* values for kiar register - indirect addressing of these regs */
+ #define kitor0 0x00 /* index table origin register 0 */
+ #define kitor1 0x01 /* index table origin register 1 */
+ #define kitor2 0x02 /* index table origin register 2 */
+ #define kitor3 0x03 /* index table origin register 3 */
+ #define kaddr0 0x04 /* address decode definition regsiter 0 */
+ #define kaddr1 0x05 /* address decode definition regsiter 1 */
+ #define kconf 0x40 /* decompression core config register */
+ #define kid 0x41 /* decompression core ID register */
+ #define kver 0x42 /* decompression core version # reg */
+ #define kpear 0x50 /* bus error addr reg (PLB addr) */
+ #define kbear 0x51 /* bus error addr reg (DCP to EBIU addr)*/
+ #define kesr0 0x52 /* bus error status reg 0 (R/clear) */
+ #define kesr0s 0x53 /* bus error status reg 0 (set) */
+ /* There are 0x400 of the following registers, from krom0 to krom3ff*/
+ /* Only the first one is given here. */
+ #define krom0 0x400 /* SRAM/ROM read/write */
+
+/******************************************************************************
+ * Power Management
+ ******************************************************************************/
+#define POWERMAN_DCR_BASE 0xb8
+#define cpmsr (POWERMAN_DCR_BASE+0x0) /* Power management status */
+#define cpmer (POWERMAN_DCR_BASE+0x1) /* Power management enable */
+#define cpmfr (POWERMAN_DCR_BASE+0x2) /* Power management force */
+
+/******************************************************************************
+ * Extrnal Bus Controller
+ ******************************************************************************/
+#define EBC_DCR_BASE 0x12
+#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */
+#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */
+ /* values for ebccfga register - indirect addressing of these regs */
+ #define pb0cr 0x00 /* periph bank 0 config reg */
+ #define pb1cr 0x01 /* periph bank 1 config reg */
+ #define pb2cr 0x02 /* periph bank 2 config reg */
+ #define pb3cr 0x03 /* periph bank 3 config reg */
+ #define pb4cr 0x04 /* periph bank 4 config reg */
+ #define pb5cr 0x05 /* periph bank 5 config reg */
+ #define pb6cr 0x06 /* periph bank 6 config reg */
+ #define pb7cr 0x07 /* periph bank 7 config reg */
+ #define pb0ap 0x10 /* periph bank 0 access parameters */
+ #define pb1ap 0x11 /* periph bank 1 access parameters */
+ #define pb2ap 0x12 /* periph bank 2 access parameters */
+ #define pb3ap 0x13 /* periph bank 3 access parameters */
+ #define pb4ap 0x14 /* periph bank 4 access parameters */
+ #define pb5ap 0x15 /* periph bank 5 access parameters */
+ #define pb6ap 0x16 /* periph bank 6 access parameters */
+ #define pb7ap 0x17 /* periph bank 7 access parameters */
+ #define pbear 0x20 /* periph bus error addr reg */
+ #define pbesr0 0x21 /* periph bus error status reg 0 */
+ #define pbesr1 0x22 /* periph bus error status reg 1 */
+ #define epcr 0x23 /* external periph control reg */
+
+/******************************************************************************
+ * Control
+ ******************************************************************************/
+#define CNTRL_DCR_BASE 0x0b0
+#define pllmd (CNTRL_DCR_BASE+0x0) /* PLL mode register */
+#define cntrl0 (CNTRL_DCR_BASE+0x1) /* Control 0 register */
+#define cntrl1 (CNTRL_DCR_BASE+0x2) /* Control 1 register */
+#define reset (CNTRL_DCR_BASE+0x3) /* reset register */
+#define strap (CNTRL_DCR_BASE+0x4) /* strap register */
+
+/* Bit definitions */
+#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */
+#define PLLMR_FWD_DIV_BYPASS 0xE0000000
+#define PLLMR_FWD_DIV_3 0xA0000000
+#define PLLMR_FWD_DIV_4 0x80000000
+#define PLLMR_FWD_DIV_6 0x40000000
+
+#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */
+#define PLLMR_FB_DIV_1 0x02000000
+#define PLLMR_FB_DIV_2 0x04000000
+#define PLLMR_FB_DIV_3 0x06000000
+#define PLLMR_FB_DIV_4 0x08000000
+
+#define PLLMR_TUNING_MASK 0x01F80000
+
+#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */
+#define PLLMR_CPU_PLB_DIV_1 0x00000000
+#define PLLMR_CPU_PLB_DIV_2 0x00020000
+#define PLLMR_CPU_PLB_DIV_3 0x00040000
+#define PLLMR_CPU_PLB_DIV_4 0x00060000
+
+#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */
+#define PLLMR_OPB_PLB_DIV_1 0x00000000
+#define PLLMR_OPB_PLB_DIV_2 0x00008000
+#define PLLMR_OPB_PLB_DIV_3 0x00010000
+#define PLLMR_OPB_PLB_DIV_4 0x00018000
+
+#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */
+#define PLLMR_PCI_PLB_DIV_1 0x00000000
+#define PLLMR_PCI_PLB_DIV_2 0x00002000
+#define PLLMR_PCI_PLB_DIV_3 0x00004000
+#define PLLMR_PCI_PLB_DIV_4 0x00006000
+
+#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */
+#define PLLMR_EXB_PLB_DIV_2 0x00000000
+#define PLLMR_EXB_PLB_DIV_3 0x00000800
+#define PLLMR_EXB_PLB_DIV_4 0x00001000
+#define PLLMR_EXB_PLB_DIV_5 0x00001800
+
+/* definitions for PPC405GPr (new mode strapping) */
+#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */
+
+#define PSR_PLL_FWD_MASK 0xC0000000
+#define PSR_PLL_FDBACK_MASK 0x30000000
+#define PSR_PLL_TUNING_MASK 0x0E000000
+#define PSR_PLB_CPU_MASK 0x01800000
+#define PSR_OPB_PLB_MASK 0x00600000
+#define PSR_PCI_PLB_MASK 0x00180000
+#define PSR_EB_PLB_MASK 0x00060000
+#define PSR_ROM_WIDTH_MASK 0x00018000
+#define PSR_ROM_LOC 0x00004000
+#define PSR_PCI_ASYNC_EN 0x00001000
+#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */
+#define PSR_PCI_ARBIT_EN 0x00000400
+#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */
+
+/*
+ * PLL Voltage Controlled Oscillator (VCO) definitions
+ * Maximum and minimum values (in MHz) for correct PLL operation.
+ */
+#define VCO_MIN 400
+#define VCO_MAX 800
+
+/******************************************************************************
+ * Memory Access Layer
+ ******************************************************************************/
+#define MAL_DCR_BASE 0x180
+#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
+#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
+#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
+#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
+#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
+#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
+#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
+#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
+#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
+#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
+#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
+#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
+#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
+#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
+#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
+#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
+
+/*-----------------------------------------------------------------------------
+| IIC Register Offsets
+'----------------------------------------------------------------------------*/
+#define IICMDBUF 0x00
+#define IICSDBUF 0x02
+#define IICLMADR 0x04
+#define IICHMADR 0x05
+#define IICCNTL 0x06
+#define IICMDCNTL 0x07
+#define IICSTS 0x08
+#define IICEXTSTS 0x09
+#define IICLSADR 0x0A
+#define IICHSADR 0x0B
+#define IICCLKDIV 0x0C
+#define IICINTRMSK 0x0D
+#define IICXFRCNT 0x0E
+#define IICXTCNTLSS 0x0F
+#define IICDIRECTCNTL 0x10
+
+/*-----------------------------------------------------------------------------
+| UART Register Offsets
+'----------------------------------------------------------------------------*/
+#define DATA_REG 0x00
+#define DL_LSB 0x00
+#define DL_MSB 0x01
+#define INT_ENABLE 0x01
+#define FIFO_CONTROL 0x02
+#define LINE_CONTROL 0x03
+#define MODEM_CONTROL 0x04
+#define LINE_STATUS 0x05
+#define MODEM_STATUS 0x06
+#define SCRATCH 0x07
+
+/******************************************************************************
+ * On Chip Memory
+ ******************************************************************************/
+#define OCM_DCR_BASE 0x018
+#define ocmisarc (OCM_DCR_BASE+0x00) /* OCM I-side address compare reg */
+#define ocmiscntl (OCM_DCR_BASE+0x01) /* OCM I-side control reg */
+#define ocmdsarc (OCM_DCR_BASE+0x02) /* OCM D-side address compare reg */
+#define ocmdscntl (OCM_DCR_BASE+0x03) /* OCM D-side control reg */
+
+
+/*
+ * Macro for accessing the indirect EBC register
+ */
+#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
+#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd)
+
+
+#ifndef __ASSEMBLY__
+
+typedef struct
+{
+ unsigned long pllFwdDiv;
+ unsigned long pllFwdDivB;
+ unsigned long pllFbkDiv;
+ unsigned long pllPlbDiv;
+ unsigned long pllPciDiv;
+ unsigned long pllExtBusDiv;
+ unsigned long pllOpbDiv;
+ unsigned long freqVCOMhz; /* in MHz */
+ unsigned long freqProcessor;
+ unsigned long freqPLB;
+ unsigned long freqPCI;
+ unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
+ unsigned long pciClkSync; /* PCI clock is synchronous */
+} PPC405_SYS_INFO;
+
+#endif /* _ASMLANGUAGE */
+
+#define RESET_VECTOR 0xfffffffc
+#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache
+ line aligned data. */
+
+#endif /* __PPC405_H__ */
+
projects / u-boot / commitdiff