]> git.sur5r.net Git - u-boot/commitdiff
ppc4xx: Optimizations/Cleanups for IBM DDR2 Memory Controller
authorProdyut Hazarika <phazarika@amcc.com>
Wed, 27 Aug 2008 23:39:00 +0000 (16:39 -0700)
committerStefan Roese <sr@denx.de>
Fri, 29 Aug 2008 08:01:36 +0000 (10:01 +0200)
Removed Magic numbers from Initialization preload registers
Tested with Kilauea, Glacier, Canyonlands and Katmai boards
About 5-7% improvement seen for LMBench memtests

Signed-off-by: Prodyut Hazarika <phazarika@amcc.com>
Signed-off-by: Stefan Roese <sr@denx.de>
cpu/ppc4xx/44x_spd_ddr2.c

index 001f2c1d3ac7d1da5d64eb37e16a589d9a506b63..15250d470dac36bf468a03406fe990f50f3b462b 100644 (file)
@@ -118,6 +118,7 @@ static inline void ppc4xx_ibm_ddr2_register_dump(void);
 
 #define ODS_FULL       0x00000000
 #define ODS_REDUCED    0x00000002
+#define OCD_CALIB_DEF  0x00000380
 
 /* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
 #define ODT_EB0R       (0x80000000 >> 8)
@@ -570,15 +571,24 @@ phys_size_t initdram(int board_type)
        mtsdram(SDRAM_MCOPT2,
                (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
                         SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
-               (SDRAM_MCOPT2_DCEN_ENABLE | SDRAM_MCOPT2_IPTR_EXECUTE));
+                        SDRAM_MCOPT2_IPTR_EXECUTE);
 
        /*------------------------------------------------------------------
-        * Wait for SDRAM_CFG0_DC_EN to complete.
+        * Wait for IPTR_EXECUTE init sequence to complete.
         *-----------------------------------------------------------------*/
        do {
                mfsdram(SDRAM_MCSTAT, val);
        } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
 
+       /* enable the controller only after init sequence completes */
+       mfsdram(SDRAM_MCOPT2, val);
+       mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE));
+
+       /* Make sure delay-line calibration is done before proceeding */
+       do {
+               mfsdram(SDRAM_DLCR, val);
+       } while (!(val & SDRAM_DLCR_DLCS_COMPLETE));
+
        /* get installed memory size */
        dram_size = sdram_memsize();
 
@@ -1343,22 +1353,50 @@ static void program_initplr(unsigned long *dimm_populated,
                emr = CMD_EMR | SELECT_EMR | odt | ods;
                emr2 = CMD_EMR | SELECT_EMR2;
                emr3 = CMD_EMR | SELECT_EMR3;
-               mtsdram(SDRAM_INITPLR0,  0xB5000000 | CMD_NOP);         /* NOP */
+               /* NOP - Wait 106 MemClk cycles */
+               mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP |
+                                       SDRAM_INITPLR_IMWT_ENCODE(106));
                udelay(1000);
-               mtsdram(SDRAM_INITPLR1,  0x82000400 | CMD_PRECHARGE);   /* precharge 8 DDR clock cycle */
-               mtsdram(SDRAM_INITPLR2,  0x80800000 | emr2);            /* EMR2 */
-               mtsdram(SDRAM_INITPLR3,  0x80800000 | emr3);            /* EMR3 */
-               mtsdram(SDRAM_INITPLR4,  0x80800000 | emr);             /* EMR DLL ENABLE */
-               mtsdram(SDRAM_INITPLR5,  0x80800000 | mr | DLL_RESET);  /* MR w/ DLL reset */
+               /* precharge 4 MemClk cycles */
+               mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
+                                       SDRAM_INITPLR_IMWT_ENCODE(4));
+               /* EMR2 - Wait tMRD (2 MemClk cycles) */
+               mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 |
+                                       SDRAM_INITPLR_IMWT_ENCODE(2));
+               /* EMR3 - Wait tMRD (2 MemClk cycles) */
+               mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 |
+                                       SDRAM_INITPLR_IMWT_ENCODE(2));
+               /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */
+               mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr |
+                                       SDRAM_INITPLR_IMWT_ENCODE(2));
+               /* MR w/ DLL reset - 200 cycle wait for DLL reset */
+               mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET |
+                                       SDRAM_INITPLR_IMWT_ENCODE(200));
                udelay(1000);
-               mtsdram(SDRAM_INITPLR6,  0x82000400 | CMD_PRECHARGE);   /* precharge 8 DDR clock cycle */
-               mtsdram(SDRAM_INITPLR7,  0x8a000000 | CMD_REFRESH);     /* Refresh  50 DDR clock cycle */
-               mtsdram(SDRAM_INITPLR8,  0x8a000000 | CMD_REFRESH);     /* Refresh  50 DDR clock cycle */
-               mtsdram(SDRAM_INITPLR9,  0x8a000000 | CMD_REFRESH);     /* Refresh  50 DDR clock cycle */
-               mtsdram(SDRAM_INITPLR10, 0x8a000000 | CMD_REFRESH);     /* Refresh  50 DDR clock cycle */
-               mtsdram(SDRAM_INITPLR11, 0x80000000 | mr);              /* MR w/o DLL reset */
-               mtsdram(SDRAM_INITPLR12, 0x80800380 | emr);             /* EMR OCD Default */
-               mtsdram(SDRAM_INITPLR13, 0x80800000 | emr);             /* EMR OCD Exit */
+               /* precharge 4 MemClk cycles */
+               mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
+                                       SDRAM_INITPLR_IMWT_ENCODE(4));
+               /* Refresh 25 MemClk cycles */
+               mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+                                       SDRAM_INITPLR_IMWT_ENCODE(25));
+               /* Refresh 25 MemClk cycles */
+               mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+                                       SDRAM_INITPLR_IMWT_ENCODE(25));
+               /* Refresh 25 MemClk cycles */
+               mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+                                       SDRAM_INITPLR_IMWT_ENCODE(25));
+               /* Refresh 25 MemClk cycles */
+               mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
+                                        SDRAM_INITPLR_IMWT_ENCODE(25));
+               /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */
+               mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr |
+                                        SDRAM_INITPLR_IMWT_ENCODE(2));
+               /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */
+               mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF |
+                                        SDRAM_INITPLR_IMWT_ENCODE(2) | emr);
+               /* EMR OCD Exit */
+               mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr |
+                                        SDRAM_INITPLR_IMWT_ENCODE(2));
        } else {
                printf("ERROR: ucode error as unknown DDR type in program_initplr");
                spd_ddr_init_hang ();
@@ -2466,12 +2504,13 @@ static void program_DQS_calibration(unsigned long *dimm_populated,
         * Program RFDC register
         * Set Feedback Fractional Oversample
         * Auto-detect read sample cycle enable
+        * Set RFOS to 1/4 of memclk cycle (0x3f)
         *-----------------------------------------------------------------*/
        mfsdram(SDRAM_RFDC, val);
        mtsdram(SDRAM_RFDC,
                (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
                         SDRAM_RFDC_RFFD_MASK))
-               | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0) |
+               | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) |
                   SDRAM_RFDC_RFFD_ENCODE(0)));
 
        DQS_calibration_process();