LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
+LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
TAG_SUBDIRS += drivers/qe
TAG_SUBDIRS += drivers/rtc
TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/spi
TAG_SUBDIRS += drivers/usb
TAG_SUBDIRS += drivers/video
SPI configuration items (port pins to use, etc). For
an example, see include/configs/sacsng.h.
+ CONFIG_HARD_SPI
+
+ Enables a hardware SPI driver for general-purpose reads
+ and writes. As with CONFIG_SOFT_SPI, the board configuration
+ must define a list of chip-select function pointers.
+ Currently supported on some MPC8xxx processors. For an
+ example, see include/configs/mpc8349emds.h.
+
- FPGA Support: CONFIG_FPGA
Enables FPGA subsystem.
--- /dev/null
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)libspi.a
+
+COBJS-y += mpc8xxx_spi.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (c) 2006 Ben Warren, Qstreams Networks Inc.
+ * With help from the common/soft_spi and cpu/mpc8260 drivers
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/mpc8xxx_spi.h>
+
+#ifdef CONFIG_HARD_SPI
+
+#define SPI_EV_NE 0x80000000 >> 22 /* Receiver Not Empty */
+#define SPI_EV_NF 0x80000000 >> 23 /* Transmitter Not Full */
+
+#define SPI_MODE_LOOP 0x80000000 >> 1 /* Loopback mode */
+#define SPI_MODE_REV 0x80000000 >> 5 /* Reverse mode - MSB first */
+#define SPI_MODE_MS 0x80000000 >> 6 /* Always master */
+#define SPI_MODE_EN 0x80000000 >> 7 /* Enable interface */
+
+#define SPI_PRESCALER(reg, div) (reg)=((reg) & 0xfff0ffff) | ((div)<<16)
+#define SPI_CHARLENGTH(reg, div) (reg)=((reg) & 0xff0fffff) | ((div)<<20)
+
+#define SPI_TIMEOUT 1000
+
+void spi_init(void)
+{
+ volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+
+ /* ------------------------------------------------
+ * SPI pins on the MPC83xx are not muxed, so all we do is initialize
+ * some registers
+ * ------------------------------------------------ */
+ spi->mode = SPI_MODE_REV | SPI_MODE_MS | SPI_MODE_EN;
+ SPI_PRESCALER(spi->mode, 1); /* Use SYSCLK / 8 (16.67MHz typ.) */
+ spi->event = 0xffffffff; /* Clear all SPI events */
+ spi->mask = 0x00000000; /* Mask all SPI interrupts */
+ spi->com = 0; /* LST bit doesn't do anything, so disregard */
+}
+
+int spi_xfer(spi_chipsel_type chipsel, int bitlen, uchar * dout, uchar * din)
+{
+ volatile spi8xxx_t *spi = &((immap_t *) (CFG_IMMR))->spi;
+ unsigned int tmpdout, tmpdin, event;
+ int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0);
+ int tm, isRead = 0;
+ unsigned char charSize = 32;
+
+ debug("spi_xfer: chipsel %08X dout %08X din %08X bitlen %d\n",
+ (int)chipsel, *(uint *) dout, *(uint *) din, bitlen);
+
+ if (chipsel != NULL)
+ (*chipsel) (1); /* select the target chip */
+
+ spi->event = 0xffffffff; /* Clear all SPI events */
+
+ /* handle data in 32-bit chunks */
+ while (numBlks--) {
+ tmpdout = 0;
+ charSize = (bitlen >= 32 ? 32 : bitlen);
+
+ /* Shift data so it's msb-justified */
+ tmpdout = *(u32 *) dout >> (32 - charSize);
+
+ /* The LEN field of the SPMODE register is set as follows:
+ *
+ * Bit length setting
+ * l <= 4 3
+ * 4 < l <= 16 l - 1
+ * l > 16 0
+ */
+
+ if (bitlen <= 16)
+ SPI_CHARLENGTH(spi->mode, bitlen <= 4 ? 3 : bitlen - 1);
+ else {
+ SPI_CHARLENGTH(spi->mode, 0);
+ /* Set up the next iteration if sending > 32 bits */
+ bitlen -= 32;
+ dout += 4;
+ }
+
+ spi->tx = tmpdout; /* Write the data out */
+ debug("*** spi_xfer: ... %08x written\n", tmpdout);
+
+ /* --------------------------------
+ * Wait for SPI transmit to get out
+ * or time out (1 second = 1000 ms)
+ * The NE event must be read and cleared first
+ * -------------------------------- */
+ for (tm = 0, isRead = 0; tm < SPI_TIMEOUT; ++tm) {
+ event = spi->event;
+ if (event & SPI_EV_NE) {
+ tmpdin = spi->rx;
+ spi->event |= SPI_EV_NE;
+ isRead = 1;
+
+ *(u32 *) din = (tmpdin << (32 - charSize));
+ if (charSize == 32) {
+ /* Advance output buffer by 32 bits */
+ din += 4;
+ }
+ }
+ /* Only bail when we've had both NE and NF events.
+ * This will cause timeouts on RO devices, so maybe
+ * in the future put an arbitrary delay after writing
+ * the device. Arbitrary delays suck, though... */
+ if (isRead && (event & SPI_EV_NF))
+ break;
+ }
+ if (tm >= SPI_TIMEOUT)
+ puts("*** spi_xfer: Time out during SPI transfer");
+
+ debug("*** spi_xfer: transfer ended. Value=%08x\n", tmpdin);
+ }
+
+ if (chipsel != NULL)
+ (*chipsel) (0); /* deselect the target chip */
+ return 0;
+}
+
+#endif /* CONFIG_HARD_SPI */
#include <asm/types.h>
#include <asm/fsl_i2c.h>
+#include <asm/mpc8xxx_spi.h>
/*
* Local Access Window
u8 res3[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res4[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[2]; /* PCI Software Configuration Registers */
ios83xx_t ios; /* Sequencer */
u8 res2[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res3[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
u8 res4[0x80];
u8 res2[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res3[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
u8 res4[0x80];
u8 res2[0x900];
lbus83xx_t lbus; /* Local Bus Controller Registers */
u8 res3[0x1000];
- spi83xx_t spi; /* Serial Peripheral Interface */
+ spi8xxx_t spi; /* Serial Peripheral Interface */
dma83xx_t dma; /* DMA */
pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
u8 res4[0x80];
--- /dev/null
+/*
+ * Freescale non-CPM SPI Controller
+ *
+ * Copyright 2008 Qstreams Networks, Inc.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_MPC8XXX_SPI_H_
+#define _ASM_MPC8XXX_SPI_H_
+
+#include <asm/types.h>
+
+#if defined(CONFIG_MPC834X) || \
+ defined(CONFIG_MPC8313) || \
+ defined(CONFIG_MPC8315) || \
+ defined(CONFIG_MPC837X)
+
+typedef struct spi8xxx
+{
+ u8 res0[0x20]; /* 0x0-0x01f reserved */
+ u32 mode; /* mode register */
+ u32 event; /* event register */
+ u32 mask; /* mask register */
+ u32 com; /* command register */
+ u32 tx; /* transmit register */
+ u32 rx; /* receive register */
+ u8 res1[0xC8]; /* fill up to 0x100 */
+} spi8xxx_t;
+
+#endif
+
+#endif /* _ASM_MPC8XXX_SPI_H_ */
defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
+#if defined(CONFIG_HARD_SPI)
+#include <spi.h>
+#endif
#if defined(CONFIG_CMD_NAND)
void nand_init (void);
#endif
}
#endif
+#if defined(CONFIG_HARD_SPI)
+static int init_func_spi (void)
+{
+ puts ("SPI: ");
+ spi_init ();
+ puts ("ready\n");
+ return (0);
+}
+#endif
+
/***********************************************************************/
#if defined(CONFIG_WATCHDOG)
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
init_func_i2c,
#endif
+#if defined(CONFIG_HARD_SPI)
+ init_func_spi,
+#endif
#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
dtt_init,
#endif
projects / u-boot / commitdiff