nitrogen6x: display: add support for fusion 7 display

Add support for the Touch Revolution Fusion7 display: 800x480 RGB
with a custom F0710A resistive touch controller.

Auto-detection of this panel is supported so no configuration is
required.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 045f81ecb7230a5c7394c92b0d716a6cccdeb649..be2a41f1a4e1b49f896f7be7292c1653cf5c3ef9 100644 (file)
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -613,6 +613,26 @@ struct display_info_t const displays[] = {{
                .vsync_len      = 10,
                .sync           = FB_SYNC_EXT,
                .vmode          = FB_VMODE_NONINTERLACED
+} }, {
+       .bus    = 2,
+       .addr   = 0x10,
+       .pixfmt = IPU_PIX_FMT_RGB666,
+       .detect = detect_i2c,
+       .enable = enable_rgb,
+       .mode   = {
+               .name           = "fusion7",
+               .refresh        = 60,
+               .xres           = 800,
+               .yres           = 480,
+               .pixclock       = 33898,
+               .left_margin    = 96,
+               .right_margin   = 24,
+               .upper_margin   = 3,
+               .lower_margin   = 10,
+               .hsync_len      = 72,
+               .vsync_len      = 7,
+               .sync           = 0x40000002,
+               .vmode          = FB_VMODE_NONINTERLACED
 } }, {
        .bus    = 2,
        .addr   = 0x48,