COBJS-$(CONFIG_PPC_P2040) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
-COBJS-$(CONFIG_PPC_P3060) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P2040) += p2041_ids.o
COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
-COBJS-$(CONFIG_PPC_P3060) += p3060_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
COBJS-$(CONFIG_PPC_P2040) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
-COBJS-$(CONFIG_PPC_P3060) += p3060_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
#define fdt_fixup_fman_firmware(x)
#endif
-#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#if defined(CONFIG_PPC_P4080)
static void fdt_fixup_usb(void *fdt)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-
-#ifdef CONFIG_SYS_DPAA_QBMAN
-struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
- /* dqrr liodn, frame data liodn, liodn off, sdest */
- SET_QP_INFO( 1, 2, 1, 0),
- SET_QP_INFO( 3, 4, 2, 1),
- SET_QP_INFO( 5, 6, 3, 2),
- SET_QP_INFO( 7, 8, 4, 3),
- SET_QP_INFO( 9, 10, 5, 4),
- SET_QP_INFO(11, 12, 6, 5),
- SET_QP_INFO(13, 14, 7, 6),
- SET_QP_INFO(15, 16, 8, 7),
- SET_QP_INFO(17, 18, 9, 0), /* for now sdest to 0 */
- SET_QP_INFO(19, 20, 10, 0), /* for now sdest to 0 */
-};
-#endif
-
-struct srio_liodn_id_table srio_liodn_tbl[] = {
- SET_SRIO_LIODN_1(1, 198),
- SET_SRIO_LIODN_1(2, 199),
-};
-int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
-
-struct liodn_id_table liodn_tbl[] = {
- SET_USB_LIODN(1, "fsl-usb2-mph", 127),
- SET_USB_LIODN(2, "fsl-usb2-dr", 157),
-
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
-
- SET_DMA_LIODN(1, 196),
- SET_DMA_LIODN(2, 197),
-
- SET_GUTS_LIODN("fsl,srio-rmu", 200, rmuliodnr, 0xd3000),
-
-#ifdef CONFIG_SYS_DPAA_QBMAN
- SET_QMAN_LIODN(31),
- SET_BMAN_LIODN(32),
-#endif
- SET_PME_LIODN(128),
-};
-int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
-struct liodn_id_table fman1_liodn_tbl[] = {
- SET_FMAN_RX_1G_LIODN(1, 0, 11),
- SET_FMAN_RX_1G_LIODN(1, 1, 12),
- SET_FMAN_RX_1G_LIODN(1, 2, 13),
- SET_FMAN_RX_1G_LIODN(1, 3, 14),
-};
-int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
-struct liodn_id_table fman2_liodn_tbl[] = {
- SET_FMAN_RX_1G_LIODN(2, 0, 16),
- SET_FMAN_RX_1G_LIODN(2, 1, 17),
- SET_FMAN_RX_1G_LIODN(2, 2, 18),
- SET_FMAN_RX_1G_LIODN(2, 3, 19),
-};
-int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
-#endif
-#endif
-
-struct liodn_id_table sec_liodn_tbl[] = {
- SET_SEC_JR_LIODN_ENTRY(0, 146, 154),
- SET_SEC_JR_LIODN_ENTRY(1, 147, 155),
- SET_SEC_JR_LIODN_ENTRY(2, 178, 186),
- SET_SEC_JR_LIODN_ENTRY(3, 179, 187),
- SET_SEC_RTIC_LIODN_ENTRY(a, 144),
- SET_SEC_RTIC_LIODN_ENTRY(b, 145),
- SET_SEC_RTIC_LIODN_ENTRY(c, 176),
- SET_SEC_RTIC_LIODN_ENTRY(d, 177),
- SET_SEC_DECO_LIODN_ENTRY(0, 129, 161),
- SET_SEC_DECO_LIODN_ENTRY(1, 130, 162),
- SET_SEC_DECO_LIODN_ENTRY(2, 131, 163),
- SET_SEC_DECO_LIODN_ENTRY(3, 132, 164),
- SET_SEC_DECO_LIODN_ENTRY(4, 133, 165),
-};
-int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
-
-struct liodn_id_table liodn_bases[] = {
- [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(96, 106),
-#ifdef CONFIG_SYS_DPAA_FMAN
- [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
-#if (CONFIG_SYS_NUM_FMAN == 2)
- [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(64),
-#endif
-#endif
-#ifdef CONFIG_SYS_DPAA_PME
- [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(116, 133),
-#endif
-};
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include "fsl_corenet_serdes.h"
-
-static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
- [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
- SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC1,
- SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2,
- NONE, NONE, AURORA, AURORA},
- [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SGMII_FM2_DTSEC3,
- SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4,
- SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1, SGMII_FM2_DTSEC2,
- SGMII_FM1_DTSEC2, NONE, NONE, AURORA, AURORA},
- [0x16] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
- AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
- SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
- SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
- [0x19] = {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1,
- AURORA, AURORA, PCIE2, PCIE2, PCIE2, PCIE2, SGMII_FM2_DTSEC3,
- SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
- [0x1c] = {NONE, NONE, SRIO1, SRIO2, NONE, NONE, NONE, NONE,
- AURORA, AURORA, SGMII_FM2_DTSEC1, SGMII_FM1_DTSEC1,
- SGMII_FM2_DTSEC2, SGMII_FM1_DTSEC2, SGMII_FM2_DTSEC3,
- SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC4},
-};
-
-enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
-{
- if (!serdes_lane_enabled(lane))
- return NONE;
-
- return serdes_cfg_tbl[cfg][lane];
-}
-
-int is_serdes_prtcl_valid(u32 prtcl)
-{
- int i;
-
- if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
- return 0;
-
- for (i = 0; i < SRDS_MAX_LANES; i++) {
- if (serdes_cfg_tbl[prtcl][i] != NONE)
- return 1;
- }
-
- return 0;
-}
-
-void soc_serdes_init(void)
-{
- /*
- * On the P3060 the devdisr2 register does not correctly reflect
- * the state of the MACs based on the RCW fields. So disable the MACs
- * based on the srds_prtcl and ec1, ec2, ec3 fields
- */
-
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 devdisr2 = in_be32(&gur->devdisr2);
- u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-
- /* NOTE: Leave FM1-1,FM1-2 alone for MDIO access */
-
- if (!is_serdes_configured(SGMII_FM1_DTSEC3))
- devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_3;
-
- if (!is_serdes_configured(SGMII_FM1_DTSEC4))
- devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC1_4;
-
- if (!is_serdes_configured(SGMII_FM2_DTSEC1))
- devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_1;
-
- if (!is_serdes_configured(SGMII_FM2_DTSEC2))
- devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_2;
-
- if (!is_serdes_configured(SGMII_FM2_DTSEC3))
- devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_3;
-
- if (!is_serdes_configured(SGMII_FM2_DTSEC4))
- devdisr2 |= FSL_CORENET_DEVDISR2_DTSEC2_4;
-
- if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
- FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) {
- devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC1_2;
- }
-
- if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
- FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1) {
- devdisr2 &= ~FSL_CORENET_DEVDISR2_DTSEC2_1;
- }
-
- out_be32(&gur->devdisr2, devdisr2);
-}
CPU_TYPE_ENTRY(P2040, P2040, 4),
CPU_TYPE_ENTRY(P2041, P2041, 4),
CPU_TYPE_ENTRY(P3041, P3041, 4),
- CPU_TYPE_ENTRY_MASK(P3060, P3060, 6, 0xf3),
CPU_TYPE_ENTRY(P4040, P4040, 4),
CPU_TYPE_ENTRY(P4080, P4080, 8),
CPU_TYPE_ENTRY(P5010, P5010, 1),
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-#elif defined(CONFIG_PPC_P3060)
-#define CONFIG_MAX_CPUS 8
-#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
-#define CONFIG_SYS_FSL_NUM_LAWS 32
-#define CONFIG_SYS_FSL_SEC_COMPAT 4
-#define CONFIG_SYS_NUM_FMAN 2
-#define CONFIG_SYS_NUM_FM1_DTSEC 4
-#define CONFIG_SYS_NUM_FM2_DTSEC 4
-#define CONFIG_NUM_DDR_CONTROLLERS 1
-#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
-#define CONFIG_SYS_FSL_TBCLK_DIV 16
-#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
-#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
-#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
-#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
-#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
-#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
-
#elif defined(CONFIG_PPC_P4040)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
#define FSL_CORENET_RCWSR11_EC1 0x00c00000 /* bits 360..361 */
-#if defined(CONFIG_PPC_P4080) || defined(CONFIG_PPC_P3060)
+#ifdef CONFIG_PPC_P4080
#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1 0x00000000
#define FSL_CORENET_RCWSR11_EC1_FM1_USB1 0x00800000
#define FSL_CORENET_RCWSR11_EC2 0x001c0000 /* bits 363..365 */
#define SVR_P2040 0x821000
#define SVR_P2041 0x821001
#define SVR_P3041 0x821103
-#define SVR_P3060 0x820002
#define SVR_P4040 0x820100
#define SVR_P4080 0x820000
#define SVR_P5010 0x822100
COBJS-$(CONFIG_P1022DS) += ics307_clk.o
COBJS-$(CONFIG_P2020DS) += ics307_clk.o
COBJS-$(CONFIG_P3041DS) += ics307_clk.o
-COBJS-$(CONFIG_P3060QDS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
# deal with common files for P-series corenet based devices
SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o
-SUBLIB-$(CONFIG_P3060QDS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o
+++ /dev/null
-#
-# Copyright 2011 Freescale Semiconductor, Inc.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += ddr.o
-COBJS-y += eth.o
-COBJS-y += fixed_ddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(OBJS) $(SOBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-Overview
-=========
-The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC.
-
-The P3060 Processor combines six e500mc Power Architecture processor
-cores(1.2GHz) with high-performance datapath acceleration
-architecture(DPAA), CoreNet fabric infrastructure, as well as network
-and peripheral bus interfaces required for networking, telecom/datacom,
-wireless infrastructure, and military/aerospace applications.
-
-
-P3060QDS Board Specifications:
-==============================
-Memory subsystem:
- * 2G Bytes UDIMM DDR3(64bit bus) with ECC on
- * 128M Bytes NOR flash single-chip memory
- * 16M Bytes SPI flash
- * 8K Bytes AT24C64 I2C EEPROM for RCW
-
-Ethernet(Default SERDES 0x19):
- * FM1-dTSEC1: connected to RGMII PHY1 (Vitesse VSC8641 on board,Bottom of dual RJ45)
- * FM1-dTSEC2: connected to RGMII PHY2 (Vitesse VSC8641 on board,Top of dual RJ45)
- * FM1-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port1 in slot1)
- * FM1-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port3 in slot1)
- * FM2-dTSEC1: connected to SGMII PHY (Vitesse VSC8234 port0 in slot2)
- * FM2-dTSEC2: connected to SGMII PHY (Vitesse VSC8234 port2 in slot2)
- * FM2-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port0 in slot1)
- * FM2-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port2 in slot1)
-
-PCIe:
- * PCIe1: Lanes A, B, C and D of Bank1 are connected to one x4 PCIe SLOT4
- * PCIe2: Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT3
-
-RapidIO:
- * sRIO1: Lanes E, F, G and H of Bank1 are connected to sRIO1 (SLOT3)
- * sRIO2: Lanes A, B, C and D of Bank1 are connected to sRIO2 (SLOT4)
-
-USB:
- * USB1: connected via an external ULPI PHY SMC3315 to a TYPE-A interface
- * USB2: connected via an external ULPI PHY SMC3315 to a TYPE-AB interface
-
-I2C:
- * I2C1_CH0: EEPROM AT24C64(0x50) RCW, AT24C02(0x51) DDR SPD,
- AT24C02(0x53) DDR SPD, AT24C02(0x57) SystemID, RTC DS3232(0x68)
- * I2C1_CH1: 1588 RiserCard(0x55), HSLB Testport, TempMon
- ADT7461(0x4C), SerDesMux DS64MB201(0x51/59/5C/5D)
- * I2C1_CH2: VDD/GVDD/GIDD ZL6100 (0x21/0x22/0x23/0x24/0x40)
- * I2C1_CH3: OCM CFG AT24C02(0x55), OCM IPL AT24C64(0x56)
- * I2C1_CH4: PCIe SLOT1
- * I2C1_CH5: PCIe SLOT2
- * I2C1_CH6: PCIe SLOT3
- * I2C1_CH7: PCIe SLOT4
- * I2C2: NULL
- * I2C3: NULL
-
-UART:
- * Supports two UARTs up to 115200 bps for console
-
-
-Boot from NOR flash
-===================
-1. Build image
- export ARCH=powerpc
- export CROSS_COMPILE=/your_path/gcc-4.5.xx-eglibc-2.11.xx/powerpc-linux-gnu/bin/powerpc-linux-gnu-
- make P3060QDS_config
- make
-
-2. Program image
- => tftp 1000000 u-boot.bin
- => protect off all
- => erase eff80000 efffffff
- => cp.b 1000000 eff80000 80000
-
-3. Program RCW
- => tftp 1000000 rcw.bin
- => protect off all
- => erase e8000000 e801ffff
- => cp.b 1000000 e8000000 50
-
-4. Program FMAN Firmware ucode
- => tftp 1000000 ucode.bin
- => protect off all
- => erase ef000000 ef0fffff
- => cp.b 1000000 ef000000 2000
-
-5. Change DIP-switch
- RCW Location: SW1[1-5] = 01101 (eLBC 16bit NOR flash)
- Note: 1 stands for 'on', 0 stands for 'off'
-
-
-Using the Device Tree Source File
-=================================
-To create the DTB (Device Tree Binary) image file, use a command
-similar to this:
- dtc -O dtb -b 0 -p 1024 p3060qds.dts > p3060qds.dtb
-
-Or use the following command:
- {linux-2.6}/make p3060qds.dtb ARCH=powerpc
-
-then the dtb file will be generated under the following directory:
- {linux-2.6}/arch/powerpc/boot/p3060qds.dtb
-
-
-Booting Linux
-=============
-Place a linux uImage in the TFTP disk area.
- tftp 1000000 uImage
- tftp 2000000 rootfs.ext2.gz.uboot
- tftp 3000000 p3060rdb.dtb
- bootm 1000000 2000000 3000000
+++ /dev/null
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <hwconfig.h>
-#include <asm/mmu.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-#include <asm/fsl_law.h>
-
-#include "p3060qds.h"
-
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-
-phys_size_t fixed_sdram(void)
-{
- int i;
- char buf[32];
- fsl_ddr_cfg_regs_t ddr_cfg_regs;
- phys_size_t ddr_size;
- unsigned int lawbar1_target_id;
- ulong ddr_freq, ddr_freq_mhz;
-
- ddr_freq = get_ddr_freq(0);
- ddr_freq_mhz = ddr_freq / 1000000;
-
- printf("Configuring DDR for %s MT/s data rate\n",
- strmhz(buf, ddr_freq));
-
- for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) {
- if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) &&
- (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) {
- memcpy(&ddr_cfg_regs,
- fixed_ddr_parm_0[i].ddr_settings,
- sizeof(ddr_cfg_regs));
- break;
- }
- }
-
- if (fixed_ddr_parm_0[i].max_freq == 0)
- panic("Unsupported DDR data rate %s MT/s data rate\n",
- strmhz(buf, ddr_freq));
-
- ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
- ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN;
- fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0);
-
- /*
- * setup laws for DDR. If not interleaving, presuming half memory on
- * DDR1 and the other half on DDR2
- */
- if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) {
- if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
- ddr_size,
- LAW_TRGT_IF_DDR_INTRLV) < 0) {
- printf("ERROR setting Local Access Windows for DDR\n");
- return 0;
- }
- } else {
- lawbar1_target_id = LAW_TRGT_IF_DDR_1;
- if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE,
- ddr_size,
- lawbar1_target_id) < 0) {
- printf("ERROR setting Local Access Windows for DDR\n");
- return 0;
- }
- }
- return ddr_size;
-}
-
-struct board_specific_params {
- u32 n_ranks;
- u32 datarate_mhz_high;
- u32 clk_adjust;
- u32 wrlvl_start;
- u32 cpo;
- u32 write_data_delay;
- u32 force_2T;
-};
-
-/*
- * This table contains all valid speeds we want to override with board
- * specific parameters. datarate_mhz_high values need to be in ascending order
- * for each n_ranks group.
- */
-static const struct board_specific_params udimm[] = {
- /*
- * memory controller 0
- * num| hi| clk| wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | |delay |
- */
- {4, 850, 4, 6, 0xff, 2, 0},
- {4, 950, 5, 7, 0xff, 2, 0},
- {4, 1050, 5, 8, 0xff, 2, 0},
- {4, 1250, 5, 10, 0xff, 2, 0},
- {4, 1350, 5, 11, 0xff, 2, 0},
- {4, 1666, 5, 12, 0xff, 2, 0},
- {2, 850, 5, 6, 0xff, 2, 0},
- {2, 950, 5, 7, 0xff, 2, 0},
- {2, 1250, 4, 6, 0xff, 2, 0},
- {2, 1350, 5, 7, 0xff, 2, 0},
- {2, 1666, 5, 8, 0xff, 2, 0},
- {1, 850, 4, 5, 0xff, 2, 0},
- {1, 950, 4, 7, 0xff, 2, 0},
- {1, 1666, 4, 8, 0xff, 2, 0},
- {}
-};
-
-static const struct board_specific_params rdimm[] = {
- /*
- * memory controller 0
- * num| hi| clk| wrlvl | cpo |wrdata|2T
- * ranks| mhz|adjst| start | |delay |
- */
- {4, 850, 4, 6, 0xff, 2, 0},
- {4, 950, 5, 7, 0xff, 2, 0},
- {4, 1050, 5, 8, 0xff, 2, 0},
- {4, 1250, 5, 10, 0xff, 2, 0},
- {4, 1350, 5, 11, 0xff, 2, 0},
- {4, 1666, 5, 12, 0xff, 2, 0},
- {2, 850, 4, 6, 0xff, 2, 0},
- {2, 1050, 4, 7, 0xff, 2, 0},
- {2, 1666, 4, 8, 0xff, 2, 0},
- {1, 850, 4, 5, 0xff, 2, 0},
- {1, 950, 4, 7, 0xff, 2, 0},
- {1, 1666, 4, 8, 0xff, 2, 0},
- {}
-};
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- const struct board_specific_params *pbsp, *pbsp_highest = NULL;
- ulong ddr_freq;
-
- if (ctrl_num) {
- printf("Wrong parameter for controller number %d", ctrl_num);
- return;
- }
- if (!pdimm->n_ranks)
- return;
-
- if (popts->registered_dimm_en)
- pbsp = rdimm;
- else
- pbsp = udimm;
-
- /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
- * freqency and n_banks specified in board_specific_parameters table.
- */
- ddr_freq = get_ddr_freq(0) / 1000000;
- while (pbsp->datarate_mhz_high) {
- if (pbsp->n_ranks == pdimm->n_ranks) {
- if (ddr_freq <= pbsp->datarate_mhz_high) {
- popts->cpo_override = pbsp->cpo;
- popts->write_data_delay =
- pbsp->write_data_delay;
- popts->clk_adjust = pbsp->clk_adjust;
- popts->wrlvl_start = pbsp->wrlvl_start;
- popts->twoT_en = pbsp->force_2T;
- goto found;
- }
- pbsp_highest = pbsp;
- }
- pbsp++;
- }
-
- if (pbsp_highest) {
- printf("Error: board specific timing not found "
- "for data rate %lu MT/s!\n"
- "Trying to use the highest speed (%u) parameters\n",
- ddr_freq, pbsp_highest->datarate_mhz_high);
- popts->cpo_override = pbsp_highest->cpo;
- popts->write_data_delay = pbsp_highest->write_data_delay;
- popts->clk_adjust = pbsp_highest->clk_adjust;
- popts->wrlvl_start = pbsp_highest->wrlvl_start;
- popts->twoT_en = pbsp_highest->force_2T;
- } else {
- panic("DIMM is not supported by this board");
- }
-
-
-found:
-
- /*
- * The datasheet of HMT125U7BFR8C-H9 blocks CL=7 as reservered.
- * However SPD still claims CL=7 is supported. Extensive tests
- * confirmed this board cannot work stably with CL=7 with this
- * particular DIMM.
- */
- if (ddr_freq >= 800 && ddr_freq < 1066 && \
- !strncmp(pdimm[0].mpart, "HMT125U7BFR8C-H9", 16)) {
- popts->cas_latency_override = 1;
- popts->cas_latency_override_value = 8;
- debug("Override CL to 8\n");
- }
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 0;
- /*
- * Write leveling override
- */
- popts->wrlvl_override = 1;
- popts->wrlvl_sample = 0xf;
-
- /*
- * Rtt and Rtt_WR override
- */
- popts->rtt_override = 0;
-
- /* Enable ZQ calibration */
- popts->zq_en = 1;
-
- /* DHC_EN =1, ODT = 60 Ohm */
- popts->ddr_cdr1 = DDR_CDR1_DHC_EN;
-}
-
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size;
-
- puts("Initializing....");
-
- if (fsl_use_spd()) {
- puts("using SPD\n");
- dram_size = fsl_ddr_sdram();
- } else {
- puts("using fixed parameters\n");
- dram_size = fixed_sdram();
- }
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- debug(" DDR: ");
- return dram_size;
-}
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <malloc.h>
-#include <fm_eth.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <asm/fsl_dtsec.h>
-
-#include "../common/qixis.h"
-#include "../common/fman.h"
-
-#include "p3060qds_qixis.h"
-
-#define EMI_NONE 0xffffffff
-#define EMI1_RGMII1 0
-#define EMI1_SLOT1 1
-#define EMI1_SLOT2 2
-#define EMI1_SLOT3 3
-#define EMI1_RGMII2 4
-
-static int mdio_mux[NUM_FM_PORTS];
-
-static char *mdio_names[5] = {
- "P3060QDS_MDIO0",
- "P3060QDS_MDIO1",
- "P3060QDS_MDIO2",
- "P3060QDS_MDIO3",
- "P3060QDS_MDIO4",
-};
-
-/*
- * Mapping of all 18 SERDES lanes to board slots.
- * A value of '0' here means that the mapping must be determined
- * dynamically, Lane 8/9/16/17 map to Slot1 or Aurora debug
- */
-static u8 lane_to_slot[] = {
- 4, 4, 4, 4, 3, 3, 3, 3, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
-};
-
-static char *p3060qds_mdio_name_for_muxval(u32 muxval)
-{
- return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u32 muxval)
-{
- struct mii_dev *bus;
- char *name = p3060qds_mdio_name_for_muxval(muxval);
-
- if (!name) {
- printf("No bus for muxval %x\n", muxval);
- return NULL;
- }
-
- bus = miiphy_get_dev_by_name(name);
-
- if (!bus) {
- printf("No bus by name %s\n", name);
- return NULL;
- }
-
- return bus;
-}
-
-struct p3060qds_mdio {
- u32 muxval;
- struct mii_dev *realbus;
-};
-
-static void p3060qds_mux_mdio(u32 muxval)
-{
- u8 brdcfg4;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
- brdcfg4 |= (muxval << 4);
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-}
-
-static int p3060qds_mdio_read(struct mii_dev *bus, int addr, int devad,
- int regnum)
-{
- struct p3060qds_mdio *priv = bus->priv;
-
- p3060qds_mux_mdio(priv->muxval);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int p3060qds_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct p3060qds_mdio *priv = bus->priv;
-
- p3060qds_mux_mdio(priv->muxval);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int p3060qds_mdio_reset(struct mii_dev *bus)
-{
- struct p3060qds_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static int p3060qds_mdio_init(char *realbusname, u32 muxval)
-{
- struct p3060qds_mdio *pmdio;
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate P3060QDS MDIO bus\n");
- return -1;
- }
-
- pmdio = malloc(sizeof(*pmdio));
- if (!pmdio) {
- printf("Failed to allocate P3060QDS private data\n");
- free(bus);
- return -1;
- }
-
- bus->read = p3060qds_mdio_read;
- bus->write = p3060qds_mdio_write;
- bus->reset = p3060qds_mdio_reset;
- sprintf(bus->name, p3060qds_mdio_name_for_muxval(muxval));
-
- pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
- if (!pmdio->realbus) {
- printf("No bus with name %s\n", realbusname);
- free(bus);
- free(pmdio);
- return -1;
- }
-
- pmdio->muxval = muxval;
- bus->priv = pmdio;
-
- return mdio_register(bus);
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
- enum fm_port port, int offset)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- if (mdio_mux[port] == EMI1_RGMII1)
- fdt_set_phy_handle(blob, prop, pa, "phy_rgmii1");
-
- if (mdio_mux[port] == EMI1_RGMII2)
- fdt_set_phy_handle(blob, prop, pa, "phy_rgmii2");
-
- if ((mdio_mux[port] == EMI1_SLOT1) && ((srds_prtcl == 0x3)
- || (srds_prtcl == 0x6))) {
- switch (port) {
- case FM2_DTSEC4:
- fdt_set_phy_handle(blob, prop, pa, "phy2_slot1");
- break;
- case FM1_DTSEC4:
- fdt_set_phy_handle(blob, prop, pa, "phy3_slot1");
- break;
- default:
- break;
- }
- }
-
- if (mdio_mux[port] == EMI1_SLOT3) {
- switch (port) {
- case FM2_DTSEC3:
- fdt_set_phy_handle(blob, prop, pa, "phy0_slot3");
- break;
- case FM1_DTSEC3:
- fdt_set_phy_handle(blob, prop, pa, "phy1_slot3");
- break;
- default:
- break;
- }
- }
-}
-
-void fdt_fixup_board_enet(void *fdt)
-{
- int i, lane, idx;
-
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- idx = i - FM1_DTSEC1;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
- if (lane < 0)
- break;
-
- switch (mdio_mux[i]) {
- case EMI1_SLOT1:
- if (lane >= 14) {
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1");
- fdt_status_disabled_by_alias(fdt,
- "emi1_slot1_bk1");
- } else {
- fdt_status_disabled_by_alias(fdt,
- "emi1_slot1");
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1_bk1");
- }
- break;
- case EMI1_SLOT2:
- fdt_status_okay_by_alias(fdt, "emi1_slot2");
- break;
- case EMI1_SLOT3:
- fdt_status_okay_by_alias(fdt, "emi1_slot3");
- break;
- }
- break;
- case PHY_INTERFACE_MODE_RGMII:
- if (i == FM1_DTSEC1)
- fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
-
- if (i == FM1_DTSEC2)
- fdt_status_okay_by_alias(fdt, "emi1_rgmii2");
- break;
- default:
- break;
- }
- }
-#if (CONFIG_SYS_NUM_FMAN == 2)
- for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- idx = i - FM2_DTSEC1;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
- if (lane >= 0) {
- switch (mdio_mux[i]) {
- case EMI1_SLOT1:
- if (lane >= 14)
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1");
- else
- fdt_status_okay_by_alias(fdt,
- "emi1_slot1_bk1");
- break;
- case EMI1_SLOT2:
- fdt_status_okay_by_alias(fdt,
- "emi1_slot2");
- break;
- case EMI1_SLOT3:
- fdt_status_okay_by_alias(fdt,
- "emi1_slot3");
- break;
- }
- }
- break;
- default:
- break;
- }
- }
-#endif
-}
-
-static void initialize_lane_to_slot(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int sdprtl = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- switch (sdprtl) {
- case 0x03:
- case 0x06:
- lane_to_slot[8] = 1;
- lane_to_slot[9] = lane_to_slot[8];
- lane_to_slot[16] = 5;
- lane_to_slot[17] = lane_to_slot[16];
- break;
- case 0x16:
- case 0x19:
- case 0x1C:
- lane_to_slot[8] = 5;
- lane_to_slot[9] = lane_to_slot[8];
- lane_to_slot[16] = 1;
- lane_to_slot[17] = lane_to_slot[16];
- break;
- default:
- puts("Invalid SerDes protocol for P3060QDS\n");
- break;
- }
-}
-
-int board_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_FMAN_ENET
- struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
- int i;
- struct fsl_pq_mdio_info dtsec_mdio_info;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int srds_cfg = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- initialize_lane_to_slot();
-
- /*
- * Set TBIPA on FM1@DTSEC1. This is needed for configurations
- * where FM1@DTSEC1 isn't used directly, since it provides
- * MDIO for other ports.
- */
- out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
-
- /* Initialize the mdio_mux array so we can recognize empty elements */
- for (i = 0; i < NUM_FM_PORTS; i++)
- mdio_mux[i] = EMI_NONE;
-
- dtsec_mdio_info.regs =
- (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
- dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
-
- /* Register the 1G MDIO bus */
- fsl_pq_mdio_init(bis, &dtsec_mdio_info);
-
- /* Register the 5 muxing front-ends to the MDIO buses */
- if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
-
- if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
- p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
-
- if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII)
- fm_info_set_phy_address(FM1_DTSEC1, 1); /* RGMII1 */
- else if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII)
- fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT2_PHY_ADDR);
-
- if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII)
- fm_info_set_phy_address(FM1_DTSEC2, 2); /* RGMII2 */
- else if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_SGMII)
- fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
-
- fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT3_PHY_ADDR);
-
- switch (srds_cfg) {
- case 0x03:
- case 0x06:
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT4_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT2_PHY_ADDR);
- break;
- case 0x16:
- case 0x19:
- case 0x1C:
- fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT2_PHY_ADDR);
- fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT3_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
- break;
- default:
- puts("Invalid SerDes protocol for P3060QDS\n");
- break;
- }
-
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
- int idx = i - FM1_DTSEC1, lane, slot;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot[lane];
- if (QIXIS_READ(present) & (1 << (slot - 1)))
- fm_disable_port(i);
- switch (slot) {
- case 1:
- mdio_mux[i] = EMI1_SLOT1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 2:
- mdio_mux[i] = EMI1_SLOT2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 3:
- mdio_mux[i] = EMI1_SLOT3;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- };
- break;
- case PHY_INTERFACE_MODE_RGMII:
- if (i == FM1_DTSEC1) {
- mdio_mux[i] = EMI1_RGMII1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- } else if (i == FM1_DTSEC2) {
- mdio_mux[i] = EMI1_RGMII2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- }
- break;
- default:
- break;
- }
- }
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
- for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
- int idx = i - FM2_DTSEC1, lane, slot;
- switch (fm_info_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_SGMII:
- lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
- if (lane < 0)
- break;
- slot = lane_to_slot[lane];
- if (QIXIS_READ(present) & (1 << (slot - 1)))
- fm_disable_port(i);
- switch (slot) {
- case 1:
- mdio_mux[i] = EMI1_SLOT1;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 2:
- mdio_mux[i] = EMI1_SLOT2;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- case 3:
- mdio_mux[i] = EMI1_SLOT3;
- fm_info_set_mdio(i,
- mii_dev_for_muxval(mdio_mux[i]));
- break;
- };
- break;
- default:
- break;
- }
- }
-#endif /* CONFIG_SYS_NUM_FMAN */
-
- cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
- return pci_eth_init(bis);
-}
+++ /dev/null
-/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000
-#define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104
-#define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45
-#define CONFIG_SYS_DDR_TIMING_2_1200 0x0FB8A912
-#define CONFIG_SYS_DDR_MODE_1_1200 0x00441A40
-#define CONFIG_SYS_DDR_MODE_2_1200 0x00100000
-#define CONFIG_SYS_DDR_INTERVAL_1200 0x12480100
-#define CONFIG_SYS_DDR_CLK_CTRL_1200 0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_1000 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_1000 0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_1000 0x727DF944
-#define CONFIG_SYS_DDR_TIMING_2_1000 0x0FB088CF
-#define CONFIG_SYS_DDR_MODE_1_1000 0x00441830
-#define CONFIG_SYS_DDR_MODE_2_1000 0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_1000 0x0F3C0100
-#define CONFIG_SYS_DDR_CLK_CTRL_1000 0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_900 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_900 0xCC440104
-#define CONFIG_SYS_DDR_TIMING_1_900 0x616ba844
-#define CONFIG_SYS_DDR_TIMING_2_900 0x0fb088ce
-#define CONFIG_SYS_DDR_MODE_1_900 0x00441620
-#define CONFIG_SYS_DDR_MODE_2_900 0x00080000
-#define CONFIG_SYS_DDR_INTERVAL_900 0x0db60100
-#define CONFIG_SYS_DDR_CLK_CTRL_900 0x02800000
-
-#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000
-#define CONFIG_SYS_DDR_TIMING_0_800 0xcc330104
-#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b4744
-#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cc
-#define CONFIG_SYS_DDR_MODE_1_800 0x00441420
-#define CONFIG_SYS_DDR_MODE_2_800 0x00000000
-#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100
-#define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000
-
-#define CONFIG_SYS_DDR_CS0_BNDS 0x000000FF
-#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR_CS2_BNDS 0x000000FF
-#define CONFIG_SYS_DDR_CS3_BNDS 0x000000FF
-#define CONFIG_SYS_DDR2_CS0_BNDS 0x000000FF
-#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000
-#define CONFIG_SYS_DDR2_CS2_BNDS 0x000000FF
-#define CONFIG_SYS_DDR2_CS3_BNDS 0x000000FF
-#define CONFIG_SYS_DDR_CS0_CONFIG 0xA0044202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202
-#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000
-#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000
-#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80044202
-#define CONFIG_SYS_DDR2_CS1_CONFIG 0x80004202
-#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000
-#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000
-#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202
-#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
-#define CONFIG_SYS_DDR_TIMING_4 0x00000001
-#define CONFIG_SYS_DDR_TIMING_5 0x02401400
-#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000
-#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F607
-#define CONFIG_SYS_DDR_SDRAM_CFG 0xE7044000
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x24401031
-#define CONFIG_SYS_DDR_RCW_1 0x00000000
-#define CONFIG_SYS_DDR_RCW_2 0x00000000
-#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = {
- .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS,
- .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS,
- .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS,
- .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS,
- .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG,
- .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2,
- .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG,
- .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG,
- .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG,
- .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200,
- .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200,
- .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200,
- .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200,
- .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG,
- .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2,
- .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200,
- .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200,
- .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL,
- .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200,
- .ddr_data_init = CONFIG_MEM_INIT_VALUE,
- .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200,
- .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR,
- .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR,
- .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4,
- .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5,
- .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL,
- .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL,
- .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1,
- .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2
-};
-
-fixed_ddr_parm_t fixed_ddr_parm_0[] = {
- {750, 850, &ddr_cfg_regs_800},
- {850, 950, &ddr_cfg_regs_900},
- {950, 1050, &ddr_cfg_regs_1000},
- {1050, 1250, &ddr_cfg_regs_1200},
- {0, 0, NULL}
-};
+++ /dev/null
-/*
- * Copyright 2011-2012 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <linux/compiler.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_law.h>
-#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
-#include <asm/fsl_liodn.h>
-#include <fm_eth.h>
-#include <configs/P3060QDS.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/qixis.h"
-#include "p3060qds.h"
-#include "p3060qds_qixis.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
- u8 sw;
- struct cpu_type *cpu = gd->cpu;
- ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
- unsigned int i;
-
- printf("Board: %s", cpu->name);
- puts("QDS, ");
-
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
- QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
-
- sw = QIXIS_READ(brdcfg[0]);
- sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
-
- if (sw < 0x8)
- printf("vBank: %d\n", sw);
- else if (sw == 0x8)
- puts("Promjet\n");
- else if (sw == 0x9)
- puts("NAND\n");
- else
- printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-
- puts("Reset Configuration Word (RCW):");
- for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
- u32 rcw = in_be32(&gur->rcwsr[i]);
-
- if ((i % 4) == 0)
- printf("\n %08x:", i * 4);
- printf(" %08x", rcw);
- }
- puts("\n");
-
- puts("SERDES Reference Clocks: ");
- sw = QIXIS_READ(brdcfg[2]);
- for (i = 0; i < 3; i++) {
- static const char * const freq[] = {"100", "125", "Reserved",
- "156.25"};
- unsigned int clock = (sw >> (2 * i)) & 3;
-
- printf("Bank%u=%sMhz ", i+1, freq[clock]);
- }
- puts("\n");
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- /* only single DDR controller on QDS board, disable DDR1_MCK4/5 */
- setbits_be32(&gur->ddrclkdr, 0x00030000);
-
- return 0;
-}
-
-void board_config_serdes_mux(void)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- int cfg = (in_be32(&gur->rcwsr[4]) &
- FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
-
- switch (cfg) {
- case 0x03:
- case 0x06:
- /* set Lane I,J as SGMII */
- QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_B | BRDCFG6_SD3MX_A |
- BRDCFG6_SD2MX_B | BRDCFG6_SD1MX_A);
- break;
- case 0x16:
- case 0x19:
- case 0x1c:
- /* set Lane I,J as Aurora Debug */
- QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_A | BRDCFG6_SD3MX_B |
- BRDCFG6_SD2MX_A | BRDCFG6_SD1MX_B);
- break;
- default:
- puts("Invalid SerDes protocol for P3060QDS\n");
- break;
- }
-}
-
-void board_config_usb_mux(void)
-{
- u8 brdcfg4, brdcfg5, brdcfg7;
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
- u32 ec1 = rcwsr11 & FSL_CORENET_RCWSR11_EC1;
- u32 ec2 = rcwsr11 & FSL_CORENET_RCWSR11_EC2;
-
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= ~BRDCFG4_EC_MODE_MASK;
- if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
- (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
- brdcfg4 |= BRDCFG4_EC2_USB_EC1_USB;
-
- } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) &&
- ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
- (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
- brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_USB;
-
- } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
- (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) {
- brdcfg4 |= BRDCFG4_EC2_USB_EC1_RGMII;
-
- } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) &&
- ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) ||
- (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) {
- brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_RGMII;
- } else {
- brdcfg4 |= BRDCFG4_EC2_MII_EC1_MII;
- }
- QIXIS_WRITE(brdcfg[4], brdcfg4);
-
- brdcfg5 = QIXIS_READ(brdcfg[5]);
- brdcfg5 &= ~(BRDCFG5_USB1ID_MASK | BRDCFG5_USB2ID_MASK);
- brdcfg5 |= (BRDCFG5_USB1ID_CTRL | BRDCFG5_USB2ID_CTRL);
- QIXIS_WRITE(brdcfg[5], brdcfg5);
-
- brdcfg7 = BRDCFG7_JTAGMX_COP_JTAG | BRDCFG7_IQ1MX_IRQ_EVT |
- BRDCFG7_G1MX_USB1 | BRDCFG7_D1MX_TSEC3USB | BRDCFG7_I3MX_USB1;
- QIXIS_WRITE(brdcfg[7], brdcfg7);
-}
-
-int board_early_init_r(void)
-{
- const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
-
- /*
- * Remap Boot flash + PROMJET region to caching-inhibited
- * so that flash can be erased properly.
- */
-
- /* Flush d-cache and invalidate i-cache of any FLASH data */
- flush_dcache();
- invalidate_icache();
-
- /* invalidate existing TLB entry for flash + promjet */
- disable_tlb(flash_esel);
-
- set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, flash_esel, BOOKE_PAGESZ_256M, 1);
-
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
- board_config_serdes_mux();
- board_config_usb_mux();
-
- return 0;
-}
-
-static const char *serdes_clock_to_string(u32 clock)
-{
- switch (clock) {
- case SRDS_PLLCR0_RFCK_SEL_100:
- return "100";
- case SRDS_PLLCR0_RFCK_SEL_125:
- return "125";
- case SRDS_PLLCR0_RFCK_SEL_156_25:
- return "156.25";
- default:
- return "150";
- }
-}
-
-#define NUM_SRDS_BANKS 3
-
-int misc_init_r(void)
-{
- serdes_corenet_t *srds_regs;
- u32 actual[NUM_SRDS_BANKS];
- unsigned int i;
- u8 sw;
-
- sw = QIXIS_READ(brdcfg[2]);
- for (i = 0; i < 3; i++) {
- unsigned int clock = (sw >> (2 * i)) & 3;
- switch (clock) {
- case 0:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
- break;
- case 1:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
- break;
- case 3:
- actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
- break;
- default:
- printf("Warning: SDREFCLK%u switch setting of '10' is "
- "unsupported\n", i + 1);
- break;
- }
- }
-
- srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
- for (i = 0; i < NUM_SRDS_BANKS; i++) {
- u32 pllcr0 = in_be32(&srds_regs->bank[i].pllcr0);
- u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
- if (expected != actual[i]) {
- printf("Warning: SERDES bank %u expects reference clock"
- " %sMHz, but actual is %sMHz\n", i + 1,
- serdes_clock_to_string(expected),
- serdes_clock_to_string(actual[i]));
- }
- }
-
- return 0;
-}
-
-/*
- * This is map of CVDD values. 33 means CVDD is 3.3v, 25 means CVDD is 2.5v,
- * 18 means CVDD is 1.8v.
- */
-static u8 IO_VSEL[] = {
- 33, 33, 33, 25, 25, 25, 18, 18, 18,
- 33, 33, 33, 25, 25, 25, 18, 18, 18,
- 33, 33, 33, 25, 25, 25, 18, 18, 18,
- 33, 33, 33, 33, 33
-};
-
-#define IO_VSEL_MASK 0x1f
-
-/*
- * different CVDD selects diffenert spi flashs, read dutcfg[3] to get CVDD,
- * then set status of spi flash nodes to 'disabled' according to CVDD.
- * CVDD '33' will select spi flash0 and flash1, CVDD '25' will select spi
- * flash2, CVDD '18' will select spi flash3.
- */
-void fdt_fixup_board_spi(void *blob)
-{
- u8 sw5 = QIXIS_READ(dutcfg[3]);
-
- switch (IO_VSEL[sw5 & IO_VSEL_MASK]) {
- /* 3.3v */
- case 33:
- do_fixup_by_compat(blob, "atmel,at45db081d", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
- "disabled", strlen("disabled") + 1, 1);
- break;
- /* 2.5v */
- case 25:
- do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,en25q32", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,sst25wf040", "status",
- "disabled", strlen("disabled") + 1, 1);
- break;
- /* 1.8v */
- case 18:
- do_fixup_by_compat(blob, "spansion,s25sl12801", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "spansion,en25q32", "status",
- "disabled", strlen("disabled") + 1, 1);
- do_fixup_by_compat(blob, "atmel,at45db081d", "status",
- "disabled", strlen("disabled") + 1, 1);
- break;
- }
-}
-
-void ft_board_setup(void *blob, bd_t *bd)
-{
- phys_addr_t base;
- phys_size_t size;
-
- ft_cpu_setup(blob, bd);
-
- base = getenv_bootm_low();
- size = getenv_bootm_size();
-
- fdt_fixup_memory(blob, (u64)base, (u64)size);
-
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
- fdt_fixup_dr_usb(blob, bd);
-#endif
-
-#ifdef CONFIG_PCI
- pci_of_setup(blob, bd);
-#endif
-
- fdt_fixup_liodn(blob);
- fdt_fixup_dr_usb(blob, bd);
- fdt_fixup_board_spi(blob);
-
-#ifdef CONFIG_SYS_DPAA_FMAN
- fdt_fixup_fman_ethernet(blob);
- fdt_fixup_board_enet(blob);
-#endif
-}
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_H__
-#define __P3060QDS_H__
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/u-boot.h>
-
-void fdt_fixup_board_enet(void *blob);
-void pci_of_setup(void *blob, bd_t *bd);
-extern fixed_ddr_parm_t fixed_ddr_parm_0[];
-
-#endif
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __P3060QDS_QIXIS_H__
-#define __P3060QDS_QIXIS_H__
-
-/* Definitions of QIXIS Registers for P3060QDS */
-
-/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
-#define BRDCFG4_EC_MODE_MASK 0x0F
-#define BRDCFG4_EC2_MII_EC1_MII 0x00
-#define BRDCFG4_EC2_MII_EC1_USB 0x03
-#define BRDCFG4_EC2_USB_EC1_MII 0x0C
-#define BRDCFG4_EC2_USB_EC1_USB 0x0F
-#define BRDCFG4_EC2_USB_EC1_RGMII 0x0E
-#define BRDCFG4_EC2_RGMII_EC1_USB 0x0B
-#define BRDCFG4_EC2_RGMII_EC1_RGMII 0x0A
-#define BRDCFG4_EMISEL_MASK 0xF0
-
-#define BRDCFG5_ECLKS_MASK 0x80
-#define BRDCFG5_USB1ID_MASK 0x40
-#define BRDCFG5_USB2ID_MASK 0x20
-#define BRDCFG5_GC2MX_MASK 0x0C
-#define BRDCFG5_T15MX_MASK 0x03
-#define BRDCFG5_ECLKS_IEEE1588_CM 0x80
-#define BRDCFG5_USB1ID_CTRL 0x40
-#define BRDCFG5_USB2ID_CTRL 0x20
-
-#define BRDCFG6_SD1MX_A 0x01
-#define BRDCFG6_SD1MX_B 0x00
-#define BRDCFG6_SD2MX_A 0x02
-#define BRDCFG6_SD2MX_B 0x00
-#define BRDCFG6_SD3MX_A 0x04
-#define BRDCFG6_SD3MX_B 0x00
-#define BRDCFG6_SD4MX_A 0x08
-#define BRDCFG6_SD4MX_B 0x00
-
-#define BRDCFG7_JTAGMX_MASK 0xC0
-#define BRDCFG7_IQ1MX_MASK 0x20
-#define BRDCFG7_G1MX_MASK 0x10
-#define BRDCFG7_D1MX_MASK 0x0C
-#define BRDCFG7_I3MX_MASK 0x03
-#define BRDCFG7_JTAGMX_AURORA 0x00
-#define BRDCFG7_JTAGMX_FPGA 0x80
-#define BRDCFG7_JTAGMX_COP_JTAG 0xC0
-#define BRDCFG7_IQ1MX_IRQ_EVT 0x00
-#define BRDCFG7_IQ1MX_USB2 0x20
-#define BRDCFG7_G1MX_USB1 0x00
-#define BRDCFG7_G1MX_TSEC3 0x10
-#define BRDCFG7_D1MX_DMA 0x00
-#define BRDCFG7_D1MX_TSEC3USB 0x04
-#define BRDCFG7_D1MX_HDLC2 0x08
-#define BRDCFG7_I3MX_UART2_I2C34 0x00
-#define BRDCFG7_I3MX_GPIO_EVT 0x01
-#define BRDCFG7_I3MX_USB1 0x02
-#define BRDCFG7_I3MX_TSEC3 0x03
-
-#endif
P3041DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P3041DS:SECURE_BOOT
P3041DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
P3041DS_SRIO_PCIE_BOOT powerpc mpc85xx corenet_ds freescale - P3041DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000
-P3060QDS powerpc mpc85xx p3060qds freescale
-P3060QDS_NAND powerpc mpc85xx p3060qds freescale - P3060QDS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
-P3060QDS_SECURE_BOOT powerpc mpc85xx p3060qds freescale - P3060QDS:SECURE_BOOT
P4080DS powerpc mpc85xx corenet_ds freescale
P4080DS_SDCARD powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
P4080DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P4080DS:SECURE_BOOT
COBJS-$(CONFIG_PPC_P2040) += p5020.o
COBJS-$(CONFIG_PPC_P2041) += p5020.o
COBJS-$(CONFIG_PPC_P3041) += p5020.o
-COBJS-$(CONFIG_PPC_P3060) += p3060.o
COBJS-$(CONFIG_PPC_P4080) += p4080.o
COBJS-$(CONFIG_PPC_P5020) += p5020.o
endif
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <phy.h>
-#include <fm_eth.h>
-#include <asm/io.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_serdes.h>
-
-u32 port_to_devdisr[] = {
- [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
- [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
- [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
- [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
- [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
- [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
- [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
- [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
-};
-
-static int is_device_disabled(enum fm_port port)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 devdisr2 = in_be32(&gur->devdisr2);
-
- return port_to_devdisr[port] & devdisr2;
-}
-
-void fman_disable_port(enum fm_port port)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- /* don't allow disabling of DTSEC1 as its needed for MDIO */
- if (port == FM1_DTSEC1)
- return;
-
- setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
-}
-
-phy_interface_t fman_port_enet_if(enum fm_port port)
-{
- ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
-
- if (is_device_disabled(port))
- return PHY_INTERFACE_MODE_NONE;
-
- /* handle RGMII/MII first */
- if ((port == FM1_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) ==
- FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1))
- return PHY_INTERFACE_MODE_RGMII;
-
- if ((port == FM1_DTSEC2) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
- FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2))
- return PHY_INTERFACE_MODE_RGMII;
-
- if ((port == FM2_DTSEC1) && ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) ==
- FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))
- return PHY_INTERFACE_MODE_RGMII;
-
- switch (port) {
- case FM1_DTSEC1:
- case FM1_DTSEC2:
- case FM1_DTSEC3:
- case FM1_DTSEC4:
- if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
- return PHY_INTERFACE_MODE_SGMII;
- break;
- case FM2_DTSEC1:
- case FM2_DTSEC2:
- case FM2_DTSEC3:
- case FM2_DTSEC4:
- if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
- return PHY_INTERFACE_MODE_SGMII;
- break;
- default:
- return PHY_INTERFACE_MODE_NONE;
- }
-
- return PHY_INTERFACE_MODE_NONE;
-}
+++ /dev/null
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * P3060 QDS board configuration file
- */
-#define CONFIG_P3060QDS
-#define CONFIG_PHYS_64BIT
-#define CONFIG_PPC_P3060
-#define CONFIG_FSL_QIXIS
-
-#define CONFIG_NAND_FSL_ELBC
-
-#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
-
-#define CONFIG_SPI_FLASH_ATMEL
-#define CONFIG_SPI_FLASH_EON
-#define CONFIG_SPI_FLASH_SST
-
-#include "corenet_ds.h"
-
-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
-
-/* There is a PCA9547 8-channel I2C-bus multiplexer on P3060QDS board */
-#define CONFIG_I2C_MUX
-#define CONFIG_I2C_MULTI_BUS
#define CONFIG_DDR_SPD
#define CONFIG_FSL_DDR3
-#ifdef CONFIG_P3060QDS
-#define CONFIG_SYS_SPD_BUS_NUM 0
-#else
#define CONFIG_SYS_SPD_BUS_NUM 1
-#endif
#define SPD_EEPROM_ADDRESS1 0x51
#define SPD_EEPROM_ADDRESS2 0x52
#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
#define CONFIG_BAUDRATE 115200
-#if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS)
+#ifdef CONFIG_P4080DS
#define __USB_PHY_TYPE ulpi
#else
#define __USB_PHY_TYPE utmi
projects / u-boot / commitdiff