setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
        setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
 
+       /*
+        * As per Exynos5800 UM ver 0.00 section 17.13.2.1
+        * CONCONTROL register bit 3 [update_mode], Exynos5800 does not
+        * support the PHY initiated update. And it is recommended to set
+        * this field to 1'b1 during initialization
+        *
+        * When we apply PHY-initiated mode, DLL lock value is determined
+        * once at DMC init time and not updated later when we change the MIF
+        * voltage based on ASV group in kernel. Applying MC-initiated mode
+        * makes sure that DLL tracing is ON so that silicon is able to
+        * compensate the voltage variation.
+        */
+       val = readl(&drex0->concontrol);
+       val |= CONCONTROL_UPDATE_MODE;
+       writel(val , &drex0->concontrol);
+       val = readl(&drex1->concontrol);
+       val |= CONCONTROL_UPDATE_MODE;
+       writel(val , &drex1->concontrol);
+
        return 0;
 }
 #endif
 
 #define CONCONTROL_RD_FETCH_SHIFT      12
 #define CONCONTROL_RD_FETCH_MASK       (0x7 << CONCONTROL_RD_FETCH_SHIFT)
 #define CONCONTROL_AREF_EN_SHIFT       5
+#define CONCONTROL_UPDATE_MODE         (1 << 3)
 
 /* PRECHCONFIG register field */
 #define PRECHCONFIG_TP_CNT_SHIFT       24