]> git.sur5r.net Git - u-boot/commitdiff
davinci: emac: add support for more than 1 PHYs
authorManjunath Hadli <manjunath.hadli@ti.com>
Thu, 13 Oct 2011 03:40:54 +0000 (03:40 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Thu, 27 Oct 2011 19:56:36 +0000 (21:56 +0200)
add support for more than 1 PHYs. Many of the davinci platforms have more
than 1 PHYs on thier board. This patch extends support in davinci emac
driver for upto 3 PHYs.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
drivers/net/davinci_emac.c

index 52617a7fb74fdd1fce54bc433b80326c4131f088..4ffd08657e7e86075b2a726fbd5955e7d9c80a19 100644 (file)
@@ -80,10 +80,15 @@ static int                  emac_rx_queue_active = 0;
 /* Receive packet buffers */
 static unsigned char           emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
 
+#define MAX_PHY                3
+
 /* PHY address for a discovered PHY (0xff - not found) */
-static volatile u_int8_t       active_phy_addr = 0xff;
+static u_int8_t        active_phy_addr[MAX_PHY] = { 0xff, 0xff, 0xff };
+
+/* number of PHY found active */
+static u_int8_t        num_phy;
 
-phy_t                          phy;
+phy_t                          phy[MAX_PHY];
 
 static int davinci_eth_set_mac_addr(struct eth_device *dev)
 {
@@ -147,27 +152,30 @@ static int davinci_eth_phy_detect(void)
 {
        u_int32_t       phy_act_state;
        int             i;
+       int             j;
+       unsigned int    count = 0;
+
+       active_phy_addr[0] = 0xff;
+       active_phy_addr[1] = 0xff;
+       active_phy_addr[2] = 0xff;
 
-       active_phy_addr = 0xff;
+       udelay(1000);
+       phy_act_state = readl(&adap_mdio->ALIVE);
 
-       phy_act_state = readl(&adap_mdio->ALIVE) & EMAC_MDIO_PHY_MASK;
        if (phy_act_state == 0)
-               return(0);                              /* No active PHYs */
+               return 0;               /* No active PHYs */
 
        debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
 
-       for (i = 0; i < 32; i++) {
+       for (i = 0, j = 0; i < 32; i++)
                if (phy_act_state & (1 << i)) {
-                       if (phy_act_state & ~(1 << i))
-                               return(0);              /* More than one PHY */
-                       else {
-                               active_phy_addr = i;
-                               return(1);
-                       }
+                       count++;
+                       active_phy_addr[j++] = i;
                }
-       }
 
-       return(0);      /* Just to make GCC happy */
+       num_phy = count;
+
+       return count;
 }
 
 
@@ -236,7 +244,18 @@ static int gen_is_phy_connected(int phy_addr)
 {
        u_int16_t       dummy;
 
-       return(davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy));
+       return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
+}
+
+static int get_active_phy(void)
+{
+       int i;
+
+       for (i = 0; i < num_phy; i++)
+               if (phy[i].get_link_speed(active_phy_addr[i]))
+                       return i;
+
+       return -1;      /* Return error if no link */
 }
 
 static int gen_get_link_speed(int phy_addr)
@@ -362,6 +381,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
        dv_reg_p                addr;
        u_int32_t               clkdiv, cnt;
        volatile emac_desc      *rx_desc;
+       int                     index;
 
        debug_emac("+ emac_open\n");
 
@@ -460,7 +480,8 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
        /* We need to wait for MDIO to start */
        udelay(1000);
 
-       if (!phy.get_link_speed(active_phy_addr))
+       index = get_active_phy();
+       if (index == -1)
                return(0);
 
        emac_gigabit_enable();
@@ -559,12 +580,12 @@ static int davinci_eth_send_packet (struct eth_device *dev,
                                        volatile void *packet, int length)
 {
        int ret_status = -1;
-
+       int index;
        tx_send_loop = 0;
 
-       /* Return error if no link */
-       if (!phy.get_link_speed (active_phy_addr)) {
-               printf ("WARN: emac_send_packet: No link\n");
+       index = get_active_phy();
+       if (index == -1) {
+               printf(" WARN: emac_send_packet: No link\n");
                return (ret_status);
        }
 
@@ -588,7 +609,7 @@ static int davinci_eth_send_packet (struct eth_device *dev,
 
        /* Wait for packet to complete or link down */
        while (1) {
-               if (!phy.get_link_speed (active_phy_addr)) {
+               if (!phy[index].get_link_speed(active_phy_addr[index])) {
                        davinci_eth_ch_teardown (EMAC_CH_TX);
                        return (ret_status);
                }
@@ -685,6 +706,7 @@ int davinci_emac_initialize(void)
        u_int32_t       phy_id;
        u_int16_t       tmp;
        int             i;
+       int             ret;
        struct eth_device *dev;
 
        dev = malloc(sizeof *dev);
@@ -712,7 +734,7 @@ int davinci_emac_initialize(void)
        for (i = 0; i < 256; i++) {
                if (readl(&adap_mdio->ALIVE))
                        break;
-               udelay(10);
+               udelay(1000);
        }
 
        if (i >= 256) {
@@ -720,64 +742,77 @@ int davinci_emac_initialize(void)
                return(0);
        }
 
-       /* Find if a PHY is connected and get it's address */
-       if (!davinci_eth_phy_detect())
+       /* Find if PHY(s) is/are connected */
+       ret = davinci_eth_phy_detect();
+       if (!ret)
                return(0);
+       else
+               printf(" %d ETH PHY detected\n", ret);
 
        /* Get PHY ID and initialize phy_ops for a detected PHY */
-       if (!davinci_eth_phy_read(active_phy_addr, MII_PHYSID1, &tmp)) {
-               active_phy_addr = 0xff;
-               return(0);
-       }
+       for (i = 0; i < num_phy; i++) {
+               if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID1,
+                                                       &tmp)) {
+                       active_phy_addr[i] = 0xff;
+                       continue;
+               }
 
-       phy_id = (tmp << 16) & 0xffff0000;
+               phy_id = (tmp << 16) & 0xffff0000;
 
-       if (!davinci_eth_phy_read(active_phy_addr, MII_PHYSID2, &tmp)) {
-               active_phy_addr = 0xff;
-               return(0);
-       }
+               if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID2,
+                                                       &tmp)) {
+                       active_phy_addr[i] = 0xff;
+                       continue;
+               }
 
-       phy_id |= tmp & 0x0000ffff;
+               phy_id |= tmp & 0x0000ffff;
 
-       switch (phy_id) {
-       case PHY_KSZ8873:
-               sprintf(phy.name, "KSZ8873 @ 0x%02x", active_phy_addr);
-               phy.init = ksz8873_init_phy;
-               phy.is_phy_connected = ksz8873_is_phy_connected;
-               phy.get_link_speed = ksz8873_get_link_speed;
-               phy.auto_negotiate = ksz8873_auto_negotiate;
-               break;
+               switch (phy_id) {
+               case PHY_KSZ8873:
+                       sprintf(phy[i].name, "KSZ8873 @ 0x%02x",
+                                               active_phy_addr[i]);
+                       phy[i].init = ksz8873_init_phy;
+                       phy[i].is_phy_connected = ksz8873_is_phy_connected;
+                       phy[i].get_link_speed = ksz8873_get_link_speed;
+                       phy[i].auto_negotiate = ksz8873_auto_negotiate;
+                       break;
                case PHY_LXT972:
-                       sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr);
-                       phy.init = lxt972_init_phy;
-                       phy.is_phy_connected = lxt972_is_phy_connected;
-                       phy.get_link_speed = lxt972_get_link_speed;
-                       phy.auto_negotiate = lxt972_auto_negotiate;
+                       sprintf(phy[i].name, "LXT972 @ 0x%02x",
+                                               active_phy_addr[i]);
+                       phy[i].init = lxt972_init_phy;
+                       phy[i].is_phy_connected = lxt972_is_phy_connected;
+                       phy[i].get_link_speed = lxt972_get_link_speed;
+                       phy[i].auto_negotiate = lxt972_auto_negotiate;
                        break;
                case PHY_DP83848:
-                       sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr);
-                       phy.init = dp83848_init_phy;
-                       phy.is_phy_connected = dp83848_is_phy_connected;
-                       phy.get_link_speed = dp83848_get_link_speed;
-                       phy.auto_negotiate = dp83848_auto_negotiate;
+                       sprintf(phy[i].name, "DP83848 @ 0x%02x",
+                                               active_phy_addr[i]);
+                       phy[i].init = dp83848_init_phy;
+                       phy[i].is_phy_connected = dp83848_is_phy_connected;
+                       phy[i].get_link_speed = dp83848_get_link_speed;
+                       phy[i].auto_negotiate = dp83848_auto_negotiate;
                        break;
                case PHY_ET1011C:
-                       sprintf(phy.name, "ET1011C @ 0x%02x", active_phy_addr);
-                       phy.init = gen_init_phy;
-                       phy.is_phy_connected = gen_is_phy_connected;
-                       phy.get_link_speed = et1011c_get_link_speed;
-                       phy.auto_negotiate = gen_auto_negotiate;
+                       sprintf(phy[i].name, "ET1011C @ 0x%02x",
+                                               active_phy_addr[i]);
+                       phy[i].init = gen_init_phy;
+                       phy[i].is_phy_connected = gen_is_phy_connected;
+                       phy[i].get_link_speed = et1011c_get_link_speed;
+                       phy[i].auto_negotiate = gen_auto_negotiate;
                        break;
                default:
-                       sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr);
-                       phy.init = gen_init_phy;
-                       phy.is_phy_connected = gen_is_phy_connected;
-                       phy.get_link_speed = gen_get_link_speed;
-                       phy.auto_negotiate = gen_auto_negotiate;
-       }
+                       sprintf(phy[i].name, "GENERIC @ 0x%02x",
+                                               active_phy_addr[i]);
+                       phy[i].init = gen_init_phy;
+                       phy[i].is_phy_connected = gen_is_phy_connected;
+                       phy[i].get_link_speed = gen_get_link_speed;
+                       phy[i].auto_negotiate = gen_auto_negotiate;
+               }
 
-       debug("Ethernet PHY: %s\n", phy.name);
+               debug("Ethernet PHY: %s\n", phy.name);
 
-       miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write);
+               miiphy_register(phy[i].name, davinci_mii_phy_read,
+                                               davinci_mii_phy_write);
+       }
        return(1);
 }