1. Add CONFIG_SYS_DPAA_RMAN macro to t4240 and b4860.
2. Decrease RMan liodn offset number.
SET_RMAN_LIODN() is used to set liodn offset of RMan blocks 0-3.
For t4240 and b4860, RMan liodn base is assigned to 922, the original
offset number is too large that the liodn (base+offset 922+678 = 1600)
is greater than 0x500 the maximum liodn number.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
 #ifdef CONFIG_SYS_DPAA_RMAN
 struct liodn_id_table rman_liodn_tbl[] = {
        /* Set RMan block 0-3 liodn offset */
-       SET_RMAN_LIODN(0, 678),
-       SET_RMAN_LIODN(1, 679),
-       SET_RMAN_LIODN(2, 680),
-       SET_RMAN_LIODN(3, 681),
+       SET_RMAN_LIODN(0, 6),
+       SET_RMAN_LIODN(1, 7),
+       SET_RMAN_LIODN(2, 8),
+       SET_RMAN_LIODN(3, 9),
 };
 int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
 #endif
 
 #ifdef CONFIG_SYS_DPAA_RMAN
 struct liodn_id_table rman_liodn_tbl[] = {
        /* Set RMan block 0-3 liodn offset */
-       SET_RMAN_LIODN(0, 678),
-       SET_RMAN_LIODN(1, 679),
-       SET_RMAN_LIODN(2, 680),
-       SET_RMAN_LIODN(3, 681),
+       SET_RMAN_LIODN(0, 6),
+       SET_RMAN_LIODN(1, 7),
+       SET_RMAN_LIODN(2, 8),
+       SET_RMAN_LIODN(3, 9),
 };
 int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
 #endif
 
 
 #define CONFIG_SYS_DPAA_FMAN
 
+#define CONFIG_SYS_DPAA_RMAN
+
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
 /*
 
 #define CONFIG_SYS_DPAA_PME
 #define CONFIG_SYS_PMAN
 #define CONFIG_SYS_DPAA_DCE
+#define CONFIG_SYS_DPAA_RMAN
 #define CONFIG_SYS_INTERLAKEN
 
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 
 #define CONFIG_SYS_DPAA_PME
 #define CONFIG_SYS_PMAN
 #define CONFIG_SYS_DPAA_DCE
+#define CONFIG_SYS_DPAA_RMAN
 #define CONFIG_SYS_INTERLAKEN
 
 /* Default address of microcode for the Linux Fman driver */