$(call if_changed,pad_cat)
u-boot.sb: u-boot.bin spl/u-boot-spl.bin
- $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs $(objtree)/u-boot.sb
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
endif
# Specify the target for use in elftosb call
-MKIMAGE_TARGET-$(CONFIG_MX23) = mx23
-MKIMAGE_TARGET-$(CONFIG_MX28) = mx28
+MKIMAGE_TARGET-$(CONFIG_MX23) = mxsimage.mx23.cfg
+MKIMAGE_TARGET-$(CONFIG_MX28) = mxsimage.mx28.cfg
-$(OBJTREE)/mxsimage.cfg: $(SRCTREE)/$(CPUDIR)/$(SOC)/mxsimage.$(MKIMAGE_TARGET-y).cfg
- sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@
+quiet_cmd_mkimage_mxs = UIMAGE $@
+cmd_mkimage_mxs = $(objtree)/tools/mkimage -n $< -T mxsimage $@ \
+ $(if $(KBUILD_VERBOSE:1=), >/dev/null)
-$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/mxsimage.cfg
- $(OBJTREE)/tools/mkimage -n $(OBJTREE)/mxsimage.cfg -T mxsimage $@
+u-boot.sb: $(src)/$(MKIMAGE_TARGET-y) u-boot.bin spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage_mxs)
SECTION 0x0 BOOTABLE
TAG LAST
- LOAD 0x0 OBJTREE/spl/u-boot-spl.bin
+ LOAD 0x0 spl/u-boot-spl.bin
CALL 0x14 0x0
- LOAD 0x40000100 OBJTREE/u-boot.bin
+ LOAD 0x40000100 u-boot.bin
CALL 0x40000100 0x0
SECTION 0x0 BOOTABLE
TAG LAST
- LOAD 0x0 OBJTREE/spl/u-boot-spl.bin
+ LOAD 0x0 spl/u-boot-spl.bin
LOAD IVT 0x8000 0x14
CALL HAB 0x8000 0x0
- LOAD 0x40000100 OBJTREE/u-boot.bin
+ LOAD 0x40000100 u-boot.bin
LOAD IVT 0x8000 0x40000100
CALL HAB 0x8000 0x0
}
sources {
- u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
- u_boot="OBJTREE/u-boot.bin";
+ u_boot_spl="spl/u-boot-spl.bin";
+ u_boot="u-boot.bin";
}
section (0) {
sources {
- u_boot_spl="OBJTREE/spl/u-boot-spl.bin";
- u_boot="OBJTREE/u-boot.bin";
+ u_boot_spl="spl/u-boot-spl.bin";
+ u_boot="u-boot.bin";
}
section (0) {