]> git.sur5r.net Git - u-boot/commitdiff
imx6: geam6ul: Add NAND support
authorJagan Teki <jagan@amarulasolutions.com>
Tue, 13 Dec 2016 16:56:55 +0000 (17:56 +0100)
committerStefano Babic <sbabic@denx.de>
Fri, 16 Dec 2016 16:16:10 +0000 (17:16 +0100)
Add NAND support for Engicam GEAM6UL board.

Boot Log:
--------
U-Boot SPL 2016.11-g537fa5f (Nov 28 2016 - 11:42:28)
Trying to boot from NAND
NAND : 256 MiB

U-Boot 2016.11-g537fa5f (Nov 28 2016 - 11:20:06 +0100)

CPU:   Freescale i.MX6UL rev1.1 69 MHz (running at 396 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 42C
Reset cause: WDOG
Model: Engicam GEAM6UL
DRAM:  128 MiB
NAND:  256 MiB
MMC:   FSL_SDHC: 0
* Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
board/engicam/geam6ul/geam6ul.c
configs/imx6ul_geam_nand_defconfig [new file with mode: 0644]
include/configs/imx6ul_geam.h

index 85308456efa2cdb97ee91fa100923a02b384b284..40f20a9bec28c2016262770456f6f6cc59a3604b 100644 (file)
@@ -13,6 +13,7 @@
 #include <linux/sizes.h>
 
 #include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
 #include <asm/arch/sys_proto.h>
@@ -36,11 +37,81 @@ int board_early_init_f(void)
        return 0;
 }
 
+#ifdef CONFIG_NAND_MXS
+
+#define GPMI_PAD_CTRL0         (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define GPMI_PAD_CTRL1         (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
+                               PAD_CTL_SRE_FAST)
+#define GPMI_PAD_CTRL2         (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
+
+static iomux_v3_cfg_t const nand_pads[] = {
+       MX6_PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+       MX6_PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2),
+};
+
+static void setup_gpmi_nand(void)
+{
+       struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+       /* config gpmi nand iomux */
+       imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
+
+       clrbits_le32(&mxc_ccm->CCGR4,
+                    MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+                    MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+                    MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+                    MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+                    MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+       /*
+        * config gpmi and bch clock to 100 MHz
+        * bch/gpmi select PLL2 PFD2 400M
+        * 100M = 400M / 4
+        */
+       clrbits_le32(&mxc_ccm->cscmr1,
+                    MXC_CCM_CSCMR1_BCH_CLK_SEL |
+                    MXC_CCM_CSCMR1_GPMI_CLK_SEL);
+       clrsetbits_le32(&mxc_ccm->cscdr1,
+                       MXC_CCM_CSCDR1_BCH_PODF_MASK |
+                       MXC_CCM_CSCDR1_GPMI_PODF_MASK,
+                       (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
+                       (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
+
+       /* enable gpmi and bch clock gating */
+       setbits_le32(&mxc_ccm->CCGR4,
+                    MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
+                    MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
+                    MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
+                    MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
+                    MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
+
+       /* enable apbh clock gating */
+       setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
+}
+#endif /* CONFIG_NAND_MXS */
+
 int board_init(void)
 {
        /* Address of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+#ifdef CONFIG_NAND_MXS
+       setup_gpmi_nand();
+#endif
+
        return 0;
 }
 
diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig
new file mode 100644 (file)
index 0000000..b7a44c7
--- /dev/null
@@ -0,0 +1,34 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TARGET_MX6UL_GEAM=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,ENV_IS_IN_NAND"
+CONFIG_DEFAULT_FDT_FILE="imx6ul-geam-kit.dtb"
+CONFIG_DEFAULT_DEVICE_TREE="imx6ul-geam-kit"
+CONFIG_SYS_PROMPT="geam6ul> "
+CONFIG_SPL=y
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_DISPLAY_CPUINFO=y
+CONFIG_HUSH_PARSER=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_SYS_MAXARGS=32
+# CONFIG_CMD_IMLS is not set
+# CONFIG_BLK is not set
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_CACHE=y
+CONFIG_OF_LIBFDT=y
+CONFIG_MXC_UART=y
+CONFIG_NAND_MXS=y
+CONFIG_IMX_THERMAL=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_WATCHDOG_SUPPORT=y
+CONFIG_SPL_DMA_SUPPORT=y
index 794a6569c198e6d83eec148cbc302120335858a2..4fe130b7d5656ba9ad0ec2bef520ec8a8abd7be6 100644 (file)
 /* Environment in MMC */
 # if defined(CONFIG_ENV_IS_IN_MMC)
 #  define CONFIG_ENV_OFFSET            0x100000
+/* Environment in NAND */
+# elif defined(CONFIG_ENV_IS_IN_NAND)
+#  define CONFIG_ENV_OFFSET            0x400000
+#  define CONFIG_ENV_SECT_SIZE         CONFIG_ENV_SIZE
 # endif
 #endif
 
 # define CONFIG_SYS_FSL_ESDHC_ADDR     USDHC2_BASE_ADDR
 #endif
 
+/* NAND */
+#ifdef CONFIG_NAND_MXS
+# define CONFIG_SYS_MAX_NAND_DEVICE    1
+# define CONFIG_SYS_NAND_BASE          0x40000000
+# define CONFIG_SYS_NAND_5_ADDR_CYCLE
+# define CONFIG_SYS_NAND_ONFI_DETECTION
+# define CONFIG_SYS_NAND_U_BOOT_START  CONFIG_SYS_TEXT_BASE
+# define CONFIG_SYS_NAND_U_BOOT_OFFS   0x200000
+
+# define CONFIG_APBH_DMA
+# define CONFIG_APBH_DMA_BURST
+# define CONFIG_APBH_DMA_BURST8
+#endif
+
 /* SPL */
 #ifdef CONFIG_SPL
-# define CONFIG_SPL_MMC_SUPPORT
+# ifdef CONFIG_NAND_MXS
+#  define CONFIG_SPL_NAND_SUPPORT
+# else
+#  define CONFIG_SPL_MMC_SUPPORT
+# endif
 
 # include "imx6_spl.h"
 # ifdef CONFIG_SPL_BUILD