board/bsc9131rdb: Add targets for Sysclk 100MHz

BSC9131RDB supports Sysclk
-66MHz if jumper J16 is close (default state)
-100MHz if jumper J16 is open

Add targets
-BSC9131RDB_NAND_SYSCLK100 : for NAND boot at Sysclk 100MHz
-BSC9131RDB_SPIFLASH_SYSCLK100: for SPI boot at Sysclk 100MHz

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

diff --git a/board/freescale/bsc9131rdb/README b/board/freescale/bsc9131rdb/README
index 065faa378d1ff1ee3a17297d464cde498eedad6a..d7b2176eb569ef0b76af678e1e94e105af2d0d3f 100644 (file)
--- a/board/freescale/bsc9131rdb/README
+++ b/board/freescale/bsc9131rdb/README
@@ -89,10 +89,14 @@ NAND boot
 Building U-boot
 --------------
 To build the u-boot for BSC9131RDB:
-1. NAND Flash
+1. NAND Flash with sysclk 66MHz(J16 on RDB closed, default)
        make BSC9131RDB_NAND
-2. SPI Flash
+2. NAND Flash with sysclk 100MHz(J16 on RDB open)
+       make BSC9131RDB_NAND_SYSCLK100
+3. SPI Flash with sysclk 66MHz(J16 on RDB closed, default)
        make BSC9131RDB_SPIFLASH
+4. SPI Flash with sysclk 100MHz(J16 on RDB open)
+       make BSC9131RDB_SPIFLASH_SYSCLK100
 
 Memory map
 -----------

diff --git a/boards.cfg b/boards.cfg
index 37610b9812a1e293d74d7f7f69c461f13cdfb4ac..ef9521fc85f5abe8baf6ab13a9da08fdf65028c9 100644 (file)
--- a/boards.cfg
+++ b/boards.cfg
@@ -900,7 +900,9 @@ P5040DS_NAND                     powerpc     mpc85xx     corenet_ds          freescale      -
 P5040DS_SDCARD              powerpc     mpc85xx     corenet_ds          freescale      -           P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
 P5040DS_SPIFLASH            powerpc     mpc85xx     corenet_ds          freescale      -           P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
 BSC9131RDB_SPIFLASH          powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH
+BSC9131RDB_SPIFLASH_SYSCLK100 powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,SPIFLASH,SYS_CLK_100
 BSC9131RDB_NAND              powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,NAND
+BSC9131RDB_NAND_SYSCLK100    powerpc     mpc85xx     bsc9131rdb          freescale      -           BSC9131RDB:BSC9131RDB,NAND,SYS_CLK_100
 BSC9132QDS_NOR_DDRCLK100     powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100
 BSC9132QDS_NOR_DDRCLK133     powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133
 BSC9132QDS_NAND_DDRCLK100    powerpc     mpc85xx     bsc9132qds          freescale      -           BSC9132QDS:BSC9132QDS,NAND,SYS_CLK_100_DDR_100

diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 45e7ec24654613d6f5d1cbfd1e5bebf37aac879c..8b9b2cdb43a00ec20a69130925218940eaf096c7 100644 (file)
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -79,7 +79,11 @@
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_DDR_CLK_FREQ    66666666 /* DDRCLK on 9131 RDB */
+#if defined(CONFIG_SYS_CLK_100)
+#define CONFIG_SYS_CLK_FREQ    100000000 /* SYSCLK for 9131 RDB */
+#else
 #define CONFIG_SYS_CLK_FREQ    66666666 /* SYSCLK for 9131 RDB */
+#endif
 
 #define CONFIG_HWCONFIG
 /*