--- /dev/null
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * Configuration settings for the ATSTK1002 CPU daughterboard
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_AVR32 1
+#define CONFIG_AT32AP 1
+#define CONFIG_AT32AP7000 1
+#define CONFIG_ATSTK1006 1
+#define CONFIG_ATSTK1000 1
+
+#define CONFIG_ATSTK1000_EXT_FLASH 1
+
+/*
+ * Timer clock frequency. We're using the CPU-internal COUNT register
+ * for this, so this is equivalent to the CPU core clock frequency
+ */
+#define CFG_HZ 1000
+
+/*
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
+ */
+#define CONFIG_PLL 1
+#define CFG_POWER_MANAGER 1
+#define CFG_OSC0_HZ 20000000
+#define CFG_PLL0_DIV 1
+#define CFG_PLL0_MUL 7
+#define CFG_PLL0_SUPPRESS_CYCLES 16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
+#define CFG_CLKDIV_CPU 0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
+#define CFG_CLKDIV_HSB 1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
+#define CFG_CLKDIV_PBA 2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
+#define CFG_CLKDIV_PBB 1
+
+/*
+ * The PLLOPT register controls the PLL like this:
+ * icp = PLLOPT<2>
+ * ivco = PLLOPT<1:0>
+ *
+ * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
+ */
+#define CFG_PLL0_OPT 0x04
+
+#undef CONFIG_USART0
+#define CONFIG_USART1 1
+#undef CONFIG_USART2
+#undef CONFIG_USART3
+
+/* User serviceable stuff */
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_CMDLINE_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+#define CONFIG_STACKSIZE (2048)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS \
+ "console=ttyS0 root=mtd3 fbmem=2400k"
+
+#define CONFIG_BOOTCOMMAND \
+ "fsload; bootm $(fileaddr)"
+
+/*
+ * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
+ * data on the serial line may interrupt the boot sequence.
+ */
+#define CONFIG_BOOTDELAY 1
+#define CONFIG_AUTOBOOT 1
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Press SPACE to abort autoboot in %d seconds\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+/*
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
+ */
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_NET_MULTI 1
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MMC
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#define CONFIG_ATMEL_USART 1
+#define CONFIG_MACB 1
+#define CONFIG_PIO2 1
+#define CFG_NR_PIOS 5
+#define CFG_HSDRAMC 1
+#define CONFIG_MMC 1
+
+#define CFG_DCACHE_LINESZ 32
+#define CFG_ICACHE_LINESZ 32
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* External flash on STK1000 */
+#if 0
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_CFI_DRIVER 1
+#endif
+
+#define CFG_FLASH_BASE 0x00000000
+#define CFG_FLASH_SIZE 0x800000
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 135
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+
+#define CFG_INTRAM_BASE 0x24000000
+#define CFG_INTRAM_SIZE 0x8000
+
+#define CFG_SDRAM_BASE 0x10000000
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 65536
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
+
+#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
+
+#define CFG_MALLOC_LEN (256*1024)
+#define CFG_DMA_ALLOC_LEN (16384)
+
+/* Allow 4MB for the kernel run-time image */
+#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000)
+#define CFG_BOOTPARAMS_LEN (16 * 1024)
+
+/* Other configuration settings that shouldn't have to change all that often */
+#define CFG_PROMPT "U-Boot> "
+#define CFG_CBSIZE 256
+#define CFG_MAXARGS 16
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_LONGHELP 1
+
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000)
+#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
+
+#endif /* __CONFIG_H */
projects / u-boot / commitdiff