--- /dev/null
+/*
+ * Library to support early TI EVM EEPROM handling
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Lokesh Vutla
+ * Steve Kipisz
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/omap_common.h>
+#include <i2c.h>
+
+#include "board_detect.h"
+
+/**
+ * ti_i2c_eeprom_init - Initialize an i2c bus and probe for a device
+ * @i2c_bus: i2c bus number to initialize
+ * @dev_addr: Device address to probe for
+ *
+ * Return: 0 on success or corresponding error on failure.
+ */
+static int __maybe_unused ti_i2c_eeprom_init(int i2c_bus, int dev_addr)
+{
+ int rc;
+
+ if (i2c_bus >= 0) {
+ rc = i2c_set_bus_num(i2c_bus);
+ if (rc)
+ return rc;
+ }
+
+ return i2c_probe(dev_addr);
+}
+
+/**
+ * ti_i2c_eeprom_read - Read data from an EEPROM
+ * @dev_addr: The device address of the EEPROM
+ * @offset: Offset to start reading in the EEPROM
+ * @ep: Pointer to a buffer to read into
+ * @epsize: Size of buffer
+ *
+ * Return: 0 on success or corresponding result of i2c_read
+ */
+static int __maybe_unused ti_i2c_eeprom_read(int dev_addr, int offset,
+ uchar *ep, int epsize)
+{
+ return i2c_read(dev_addr, offset, 2, ep, epsize);
+}
+
+/**
+ * ti_eeprom_string_cleanup() - Handle eeprom programming errors
+ * @s: eeprom string (should be NULL terminated)
+ *
+ * Some Board manufacturers do not add a NULL termination at the
+ * end of string, instead some binary information is kludged in, hence
+ * convert the string to just printable characters of ASCII chart.
+ */
+static void __maybe_unused ti_eeprom_string_cleanup(char *s)
+{
+ int i, l;
+
+ l = strlen(s);
+ for (i = 0; i < l; i++, s++)
+ if (*s < ' ' || *s > '~') {
+ *s = 0;
+ break;
+ }
+}
+
+__weak void gpi2c_init(void)
+{
+}
+
+static int __maybe_unused ti_i2c_eeprom_get(int bus_addr, int dev_addr,
+ u32 header, u32 size, uint8_t *ep)
+{
+ u32 byte, hdr_read;
+ int rc;
+
+ gpi2c_init();
+ rc = ti_i2c_eeprom_init(bus_addr, dev_addr);
+ if (rc)
+ return rc;
+
+ /*
+ * Read the header first then only read the other contents.
+ */
+ byte = 2;
+ rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
+ if (rc)
+ return rc;
+
+ /* Corrupted data??? */
+ if (hdr_read != header) {
+ rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read, 4);
+ /*
+ * read the eeprom header using i2c again, but use only a
+ * 1 byte address (some legacy boards need this..)
+ */
+ byte = 1;
+ if (rc)
+ rc = i2c_read(dev_addr, 0x0, byte, (uint8_t *)&hdr_read,
+ 4);
+ if (rc)
+ return rc;
+ }
+ if (hdr_read != header)
+ return -1;
+
+ rc = i2c_read(dev_addr, 0x0, byte, ep, size);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+int __maybe_unused ti_i2c_eeprom_am_get(int bus_addr, int dev_addr)
+{
+ int rc;
+ struct ti_am_eeprom am_ep;
+ struct ti_common_eeprom *ep;
+
+ ep = TI_EEPROM_DATA;
+ if (ep->header == TI_EEPROM_HEADER_MAGIC)
+ goto already_read;
+
+ /* Initialize with a known bad marker for i2c fails.. */
+ ep->header = TI_DEAD_EEPROM_MAGIC;
+ ep->name[0] = 0x0;
+ ep->version[0] = 0x0;
+ ep->serial[0] = 0x0;
+
+ rc = ti_i2c_eeprom_get(bus_addr, dev_addr, TI_EEPROM_HEADER_MAGIC,
+ sizeof(am_ep), (uint8_t *)&am_ep);
+ if (rc)
+ return rc;
+
+ ep->header = am_ep.header;
+ strlcpy(ep->name, am_ep.name, TI_EEPROM_HDR_NAME_LEN + 1);
+ ti_eeprom_string_cleanup(ep->name);
+
+ /* BeagleBone Green '1' eeprom, board_rev: 0x1a 0x00 0x00 0x00 */
+ if (am_ep.version[0] == 0x1a && am_ep.version[1] == 0x00 &&
+ am_ep.version[2] == 0x00 && am_ep.version[3] == 0x00)
+ strlcpy(ep->version, "BBG1", TI_EEPROM_HDR_REV_LEN + 1);
+ else
+ strlcpy(ep->version, am_ep.version, TI_EEPROM_HDR_REV_LEN + 1);
+ ti_eeprom_string_cleanup(ep->version);
+ strlcpy(ep->serial, am_ep.serial, TI_EEPROM_HDR_SERIAL_LEN + 1);
+ ti_eeprom_string_cleanup(ep->serial);
+ strlcpy(ep->config, am_ep.config, TI_EEPROM_HDR_CONFIG_LEN + 1);
+ ti_eeprom_string_cleanup(ep->config);
+
+ memcpy(ep->mac_addr, am_ep.mac_addr,
+ TI_EEPROM_HDR_NO_OF_MAC_ADDR * TI_EEPROM_HDR_ETH_ALEN);
+
+already_read:
+ return 0;
+}
+
+bool __maybe_unused board_ti_is(char *name_tag)
+{
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ return false;
+ return !strncmp(ep->name, name_tag, TI_EEPROM_HDR_NAME_LEN);
+}
+
+bool __maybe_unused board_ti_rev_is(char *rev_tag, int cmp_len)
+{
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+ int l;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ return false;
+
+ l = cmp_len > TI_EEPROM_HDR_REV_LEN ? TI_EEPROM_HDR_REV_LEN : cmp_len;
+ return !strncmp(ep->version, rev_tag, l);
+}
+
+char * __maybe_unused board_ti_get_rev(void)
+{
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ return NULL;
+
+ return ep->version;
+}
+
+char * __maybe_unused board_ti_get_config(void)
+{
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ return NULL;
+
+ return ep->config;
+}
+
+char * __maybe_unused board_ti_get_name(void)
+{
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ return NULL;
+
+ return ep->name;
+}
+
+void __maybe_unused
+board_ti_get_eth_mac_addr(int index,
+ u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN])
+{
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+ if (ep->header == TI_DEAD_EEPROM_MAGIC)
+ goto fail;
+
+ if (index < 0 || index >= TI_EEPROM_HDR_NO_OF_MAC_ADDR)
+ goto fail;
+
+ memcpy(mac_addr, ep->mac_addr[index], TI_EEPROM_HDR_ETH_ALEN);
+ return;
+
+fail:
+ memset(mac_addr, 0, TI_EEPROM_HDR_ETH_ALEN);
+}
+
+void __maybe_unused set_board_info_env(char *name)
+{
+ char *unknown = "unknown";
+ struct ti_common_eeprom *ep = TI_EEPROM_DATA;
+
+ if (name)
+ setenv("board_name", name);
+ else if (ep->name)
+ setenv("board_name", ep->name);
+ else
+ setenv("board_name", unknown);
+
+ if (ep->version)
+ setenv("board_rev", ep->version);
+ else
+ setenv("board_rev", unknown);
+
+ if (ep->serial)
+ setenv("board_serial", ep->serial);
+ else
+ setenv("board_serial", unknown);
+}
--- /dev/null
+/*
+ * Library to support early TI EVM EEPROM handling
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __BOARD_DETECT_H
+#define __BOARD_DETECT_H
+
+/* TI EEPROM MAGIC Header identifier */
+#define TI_EEPROM_HEADER_MAGIC 0xEE3355AA
+#define TI_DEAD_EEPROM_MAGIC 0xADEAD12C
+
+#define TI_EEPROM_HDR_NAME_LEN 8
+#define TI_EEPROM_HDR_REV_LEN 4
+#define TI_EEPROM_HDR_SERIAL_LEN 12
+#define TI_EEPROM_HDR_CONFIG_LEN 32
+#define TI_EEPROM_HDR_NO_OF_MAC_ADDR 3
+#define TI_EEPROM_HDR_ETH_ALEN 6
+
+/**
+ * struct ti_am_eeprom - This structure holds data read in from the
+ * AM335x, AM437x, AM57xx TI EVM EEPROMs.
+ * @header: This holds the magic number
+ * @name: The name of the board
+ * @version: Board revision
+ * @serial: Board serial number
+ * @config: Reserved
+ * @mac_addr: Any MAC addresses written in the EEPROM
+ *
+ * The data is this structure is read from the EEPROM on the board.
+ * It is used for board detection which is based on name. It is used
+ * to configure specific TI boards. This allows booting of multiple
+ * TI boards with a single MLO and u-boot.
+ */
+struct ti_am_eeprom {
+ unsigned int header;
+ char name[TI_EEPROM_HDR_NAME_LEN];
+ char version[TI_EEPROM_HDR_REV_LEN];
+ char serial[TI_EEPROM_HDR_SERIAL_LEN];
+ char config[TI_EEPROM_HDR_CONFIG_LEN];
+ char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+} __attribute__ ((__packed__));
+
+/**
+ * struct ti_common_eeprom - Null terminated, usable EEPROM contents.
+ * header: Magic number
+ * @name: NULL terminated name
+ * @version: NULL terminated version
+ * @serial: NULL terminated serial number
+ * @config: NULL terminated Board specific config options
+ * @mac_addr: MAC addresses
+ */
+struct ti_common_eeprom {
+ u32 header;
+ char name[TI_EEPROM_HDR_NAME_LEN + 1];
+ char version[TI_EEPROM_HDR_REV_LEN + 1];
+ char serial[TI_EEPROM_HDR_SERIAL_LEN + 1];
+ char config[TI_EEPROM_HDR_CONFIG_LEN + 1];
+ char mac_addr[TI_EEPROM_HDR_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN];
+};
+
+#define TI_EEPROM_DATA ((struct ti_common_eeprom *)\
+ OMAP_SRAM_SCRATCH_BOARD_EEPROM_START)
+
+/**
+ * ti_i2c_eeprom_am_get() - Consolidated eeprom data collection for AM* TI EVMs
+ * @bus_addr: I2C bus address
+ * @dev_addr: I2C slave address
+ *
+ * ep in SRAM is populated by the this AM generic function that consolidates
+ * the basic initialization logic common across all AM* platforms.
+ */
+int ti_i2c_eeprom_am_get(int bus_addr, int dev_addr);
+
+/**
+ * board_ti_is() - Board detection logic for TI EVMs
+ * @name_tag: Tag used in eeprom for the board
+ *
+ * Return: false if board information does not match OR eeprom wasn't read.
+ * true otherwise
+ */
+bool board_ti_is(char *name_tag);
+
+/**
+ * board_ti_rev_is() - Compare board revision for TI EVMs
+ * @rev_tag: Revision tag to check in eeprom
+ * @cmp_len: How many chars to compare?
+ *
+ * NOTE: revision information is often messed up (hence the str len match) :(
+ *
+ * Return: false if board information does not match OR eeprom was'nt read.
+ * true otherwise
+ */
+bool board_ti_rev_is(char *rev_tag, int cmp_len);
+
+/**
+ * board_ti_get_rev() - Get board revision for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read.
+ * Board revision otherwise
+ */
+char *board_ti_get_rev(void);
+
+/**
+ * board_ti_get_config() - Get board config for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read.
+ * Board config otherwise
+ */
+char *board_ti_get_config(void);
+
+/**
+ * board_ti_get_name() - Get board name for TI EVMs
+ *
+ * Return: NULL if eeprom was'nt read.
+ * Board name otherwise
+ */
+char *board_ti_get_name(void);
+
+/**
+ * board_ti_get_eth_mac_addr() - Get Ethernet MAC address from EEPROM MAC list
+ * @index: 0 based index within the list of MAC addresses
+ * @mac_addr: MAC address contained at the index is returned here
+ *
+ * Does not sanity check the mac_addr. Whatever is stored in EEPROM is returned.
+ */
+void board_ti_get_eth_mac_addr(int index, u8 mac_addr[TI_EEPROM_HDR_ETH_ALEN]);
+
+/**
+ * set_board_info_env() - Setup commonly used board information environment vars
+ * @name: Name of the board
+ *
+ * If name is NULL, default_name is used.
+ */
+void set_board_info_env(char *name);
+
+#endif /* __BOARD_DETECT_H */
projects / u-boot / commitdiff