board: sama5d2_xplained: Set 'ethaddr' got from AT24MAC

If 'ethaddr' is not set, we will get the ethernet address from AT24MAC,
and set it to 'ethaddr' variable.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Reviewed-by: Andreas Bießmann <biessmann@corscience.de>

diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index 7ccadf214a108729890d5a9d6707bb10440db586..cceccd2ac459adc794e9c4fdb3572ac92aea8478 100644 (file)
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -7,6 +7,8 @@
 
 #include <common.h>
 #include <atmel_hlcdc.h>
+#include <dm.h>
+#include <i2c.h>
 #include <lcd.h>
 #include <mmc.h>
 #include <net.h>
@@ -192,6 +194,55 @@ int board_eth_init(bd_t *bis)
        return rc;
 }
 
+#ifdef CONFIG_CMD_I2C
+static int set_ethaddr_from_eeprom(void)
+{
+       const int ETH_ADDR_LEN = 6;
+       unsigned char ethaddr[ETH_ADDR_LEN];
+       const char *ETHADDR_NAME = "ethaddr";
+       struct udevice *bus, *dev;
+
+       if (getenv(ETHADDR_NAME))
+               return 0;
+
+       if (uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)) {
+               printf("Cannot find I2C bus 1\n");
+               return -1;
+       }
+
+       if (dm_i2c_probe(bus, AT24MAC_ADDR, 0, &dev)) {
+               printf("Failed to probe I2C chip\n");
+               return -1;
+       }
+
+       if (dm_i2c_read(dev, AT24MAC_REG, ethaddr, ETH_ADDR_LEN)) {
+               printf("Failed to read ethernet address from EEPROM\n");
+               return -1;
+       }
+
+       if (!is_valid_ethaddr(ethaddr)) {
+               printf("The ethernet address read from EEPROM is not valid!\n");
+               return -1;
+       }
+
+       return eth_setenv_enetaddr(ETHADDR_NAME, ethaddr);
+}
+#else
+static int set_ethaddr_from_eeprom(void)
+{
+       return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+       set_ethaddr_from_eeprom();
+
+       return 0;
+}
+#endif
+
 /* SPL */
 #ifdef CONFIG_SPL_BUILD
 void spl_board_init(void)

diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index 435956d75adf6608992ec85cc27a4f1e423802b3..7fb2bdcd4c2ca2ab4d945b24f4a998fc58d177c8 100644 (file)
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -15,6 +15,8 @@
 
 #include "at91-sama5_common.h"
 
+#define CONFIG_MISC_INIT_R
+
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
@@ -54,6 +56,10 @@
 #define CONFIG_DOS_PARTITION
 #endif
 
+/* I2C */
+#define AT24MAC_ADDR           0x5c
+#define AT24MAC_REG            0x9a
+
 /* Ethernet Hardware */
 #define CONFIG_MACB
 #define CONFIG_RMII