default "engicam"
config SYS_CONFIG_NAME
- default "imx6ul_geam"
+ default "imx6-engicam"
endif
default "engicam"
config SYS_CONFIG_NAME
- default "imx6qdl_icore"
+ default "imx6-engicam"
endif
default "engicam"
config SYS_CONFIG_NAME
- default "imx6qdl_icore_rqs"
+ default "imx6-engicam"
endif
default "engicam"
config SYS_CONFIG_NAME
- default "imx6ul_isiot"
+ default "imx6-engicam"
endif
--- /dev/null
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ *
+ * Configuration settings for the Engicam i.MX6 SOM Starter Kits.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX6_ENGICAM_CONFIG_H
+#define __IMX6_ENGICAM_CONFIG_H
+
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE SZ_128K
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+/* Environment in MMC */
+# if defined(CONFIG_ENV_IS_IN_MMC)
+# define CONFIG_ENV_OFFSET 0x100000
+/* Environment in NAND */
+# elif defined(CONFIG_ENV_IS_IN_NAND)
+# define CONFIG_ENV_OFFSET 0x400000
+# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+# endif
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "splashpos=m,m\0" \
+ "image=uImage\0" \
+ "fit_image=fit.itb\0" \
+ "fdt_high=0xffffffff\0" \
+ "fdt_addr=" FDT_ADDR "\0" \
+ "boot_fdt=try\0" \
+ "mmcpart=1\0" \
+ "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "ubiargs=setenv bootargs console=${console},${baudrate} " \
+ "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
+ "fitboot=echo Booting FIT image from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "_mmcboot=run mmcargs; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootm ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootm; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootm; " \
+ "fi\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadfit; then " \
+ "run fitboot; " \
+ "else " \
+ "if run loadimage; then " \
+ "run _mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "if mtdparts; then " \
+ "echo Starting nand boot ...; " \
+ "else " \
+ "mtdparts default; " \
+ "fi; " \
+ "run ubiargs; " \
+ "nand read ${loadaddr} kernel 0x800000; " \
+ "nand read ${fdt_addr} dtb 0x100000; " \
+ "bootm ${loadaddr} - ${fdt_addr}\0"
+
+#define CONFIG_BOOTCOMMAND "run $modeboot"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+#ifdef CONFIG_MX6UL
+# define DRAM_OFFSET(x) 0x87##x
+# define FDT_ADDR __stringify(DRAM_OFFSET(800000))
+#else
+# define DRAM_OFFSET(x) 0x1##x
+# define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
+#endif
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FIT */
+#ifdef CONFIG_FIT
+# define CONFIG_HASH_VERIFY
+# define CONFIG_IMAGE_FORMAT_LEGACY
+#endif
+
+/* UART */
+#ifdef CONFIG_MXC_UART
+# ifdef CONFIG_MX6UL
+# define CONFIG_MXC_UART_BASE UART1_BASE
+# else
+# define CONFIG_MXC_UART_BASE UART4_BASE
+# endif
+#endif
+
+/* MMC */
+#ifdef CONFIG_FSL_USDHC
+# define CONFIG_SYS_MMC_ENV_DEV 0
+#endif
+
+/* NAND */
+#ifdef CONFIG_NAND_MXS
+# define CONFIG_SYS_MAX_NAND_DEVICE 1
+# define CONFIG_SYS_NAND_BASE 0x40000000
+# define CONFIG_SYS_NAND_5_ADDR_CYCLE
+# define CONFIG_SYS_NAND_ONFI_DETECTION
+# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
+
+/* MTD device */
+# define CONFIG_MTD_DEVICE
+# define CONFIG_CMD_MTDPARTS
+# define CONFIG_MTD_PARTITIONS
+# define MTDIDS_DEFAULT "nand0=gpmi-nand"
+# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
+ "1m(env),8m(kernel),1m(dtb),-(rootfs)"
+
+/* UBI */
+# define CONFIG_CMD_UBIFS
+# define CONFIG_RBTREE
+# define CONFIG_LZO
+
+# define CONFIG_APBH_DMA
+# define CONFIG_APBH_DMA_BURST
+# define CONFIG_APBH_DMA_BURST8
+#endif
+
+/* Ethernet */
+#ifdef CONFIG_FEC_MXC
+# ifdef CONFIG_TARGET_MX6Q_ICORE_RQS
+# define CONFIG_FEC_MXC_PHYADDR 3
+# define CONFIG_FEC_XCV_TYPE RGMII
+# else
+# define CONFIG_FEC_MXC_PHYADDR 0
+# define CONFIG_FEC_XCV_TYPE RMII
+# endif
+
+# define CONFIG_MII
+#endif
+
+/* Framebuffer */
+#ifdef CONFIG_VIDEO_IPUV3
+# define CONFIG_IPUV3_CLK 260000000
+# define CONFIG_IMX_VIDEO_SKIP
+
+# define CONFIG_SPLASH_SCREEN
+# define CONFIG_SPLASH_SCREEN_ALIGN
+# define CONFIG_BMP_16BPP
+# define CONFIG_VIDEO_BMP_RLE8
+# define CONFIG_VIDEO_LOGO
+# define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+/* SPL */
+#ifdef CONFIG_SPL
+# ifdef CONFIG_NAND_MXS
+# define CONFIG_SPL_NAND_SUPPORT
+# else
+# define CONFIG_SPL_MMC_SUPPORT
+# endif
+
+# include "imx6_spl.h"
+# ifdef CONFIG_SPL_BUILD
+# if defined(CONFIG_TARGET_MX6Q_ICORE_RQS) || defined(CONFIG_TARGET_MX6UL_ISIOT)
+# define CONFIG_SYS_FSL_USDHC_NUM 2
+# else
+# define CONFIG_SYS_FSL_USDHC_NUM 1
+# endif
+
+# define CONFIG_SYS_FSL_ESDHC_ADDR 0
+# undef CONFIG_DM_GPIO
+# undef CONFIG_DM_MMC
+# endif
+#endif
+
+#endif /* __IMX6_ENGICAM_CONFIG_H */
+++ /dev/null
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam i.CoreM6 QDL Starter Kits.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __IMX6QLD_ICORE_CONFIG_H
-#define __IMX6QLD_ICORE_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-# define CONFIG_ENV_OFFSET 0x100000
-/* Environment in NAND */
-# elif defined(CONFIG_ENV_IS_IN_NAND)
-# define CONFIG_ENV_OFFSET 0x400000
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "splashpos=m,m\0" \
- "image=uImage\0" \
- "fit_image=fit.itb\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=" FDT_ADDR "\0" \
- "boot_fdt=try\0" \
- "mmcpart=1\0" \
- "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "ubiargs=setenv bootargs console=${console},${baudrate} " \
- "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
- "fitboot=echo Booting FIT image from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "_mmcboot=run mmcargs; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run _mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi\0" \
- "nandboot=echo Booting from nand ...; " \
- "if mtdparts; then " \
- "echo Starting nand boot ...; " \
- "else " \
- "mtdparts default; " \
- "fi; " \
- "run ubiargs; " \
- "nand read ${loadaddr} kernel 0x800000; " \
- "nand read ${fdt_addr} dtb 0x100000; " \
- "bootm ${loadaddr} - ${fdt_addr}\0"
-
-#define CONFIG_BOOTCOMMAND "run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-#define DRAM_OFFSET(x) 0x1##x
-#define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE UART4_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-/* NAND */
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_SYS_MAX_NAND_DEVICE 1
-# define CONFIG_SYS_NAND_BASE 0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
-# define CONFIG_SYS_NAND_ONFI_DETECTION
-# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
-
-/* MTD device */
-# define CONFIG_MTD_DEVICE
-# define CONFIG_CMD_MTDPARTS
-# define CONFIG_MTD_PARTITIONS
-# define MTDIDS_DEFAULT "nand0=gpmi-nand"
-# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
- "1m(env),8m(kernel),1m(dtb),-(rootfs)"
-
-/* UBI */
-# define CONFIG_CMD_UBIFS
-# define CONFIG_RBTREE
-# define CONFIG_LZO
-
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR 0
-# define CONFIG_FEC_XCV_TYPE RMII
-
-# define CONFIG_MII
-#endif
-
-/* Framebuffer */
-#ifdef CONFIG_VIDEO_IPUV3
-# define CONFIG_IPUV3_CLK 260000000
-# define CONFIG_IMX_VIDEO_SKIP
-
-# define CONFIG_SPLASH_SCREEN
-# define CONFIG_SPLASH_SCREEN_ALIGN
-# define CONFIG_BMP_16BPP
-# define CONFIG_VIDEO_BMP_RLE8
-# define CONFIG_VIDEO_LOGO
-# define CONFIG_VIDEO_BMP_LOGO
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# ifdef CONFIG_NAND_MXS
-# define CONFIG_SPL_NAND_SUPPORT
-# else
-# define CONFIG_SPL_MMC_SUPPORT
-# endif
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6QLD_ICORE_CONFIG_H */
+++ /dev/null
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam i.CoreM6 QDL RQS Starter Kits.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __IMX6QLD_ICORE_RQS_CONFIG_H
-#define __IMX6QLD_ICORE_RQS_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-# define CONFIG_ENV_OFFSET 0x100000
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=uImage\0" \
- "fit_image=fit.itb\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=" FDT_ADDR "\0" \
- "boot_fdt=try\0" \
- "mmcpart=1\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
- "fitboot=echo Booting FIT image from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "_mmcboot=run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "mmc dev ${mmcdev};" \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run _mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi\0"
-
-#define CONFIG_BOOTCOMMAND "run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-#define DRAM_OFFSET(x) 0x1##x
-#define FDT_ADDR __stringify(DRAM_OFFSET(8000000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE UART4_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR 3
-# define CONFIG_FEC_XCV_TYPE RGMII
-
-# define CONFIG_MII
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# define CONFIG_SPL_MMC_SUPPORT
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6QLD_ICORE_RQS_CONFIG_H */
+++ /dev/null
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam GEAM6UL Starter Kits.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __IMX6UL_GEAM_CONFIG_H
-#define __IMX6UL_GEAM_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-# define CONFIG_ENV_OFFSET 0x100000
-/* Environment in NAND */
-# elif defined(CONFIG_ENV_IS_IN_NAND)
-# define CONFIG_ENV_OFFSET 0x400000
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=uImage\0" \
- "fit_image=fit.itb\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=" FDT_ADDR "\0" \
- "boot_fdt=try\0" \
- "mmcpart=1\0" \
- "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "ubiargs=setenv bootargs console=${console},${baudrate} " \
- "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
- "fitboot=echo Booting FIT image from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "_mmcboot=run mmcargs; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run _mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi\0" \
- "nandboot=echo Booting from nand ...; " \
- "if mtdparts; then " \
- "echo Starting nand boot ...; " \
- "else " \
- "mtdparts default; " \
- "fi; " \
- "run ubiargs; " \
- "nand read ${loadaddr} kernel 0x800000; " \
- "nand read ${fdt_addr} dtb 0x100000; " \
- "bootm ${loadaddr} - ${fdt_addr}\0"
-
-#define CONFIG_BOOTCOMMAND "run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-#define DRAM_OFFSET(x) 0x87##x
-#define FDT_ADDR __stringify(DRAM_OFFSET(800000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE UART1_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-/* NAND */
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_SYS_MAX_NAND_DEVICE 1
-# define CONFIG_SYS_NAND_BASE 0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
-# define CONFIG_SYS_NAND_ONFI_DETECTION
-# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
-
-/* MTD device */
-# define CONFIG_MTD_DEVICE
-# define CONFIG_CMD_MTDPARTS
-# define CONFIG_MTD_PARTITIONS
-# define MTDIDS_DEFAULT "nand0=gpmi-nand"
-# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
- "1m(env),8m(kernel),1m(dtb),-(rootfs)"
-
-/* UBI */
-# define CONFIG_CMD_UBIFS
-# define CONFIG_RBTREE
-# define CONFIG_LZO
-
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR 0
-# define CONFIG_FEC_XCV_TYPE RMII
-
-# define CONFIG_MII
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# ifdef CONFIG_NAND_MXS
-# define CONFIG_SPL_NAND_SUPPORT
-# else
-# define CONFIG_SPL_MMC_SUPPORT
-# endif
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-# define CONFIG_SYS_FSL_USDHC_NUM 1
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6UL_GEAM_CONFIG_H */
+++ /dev/null
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * Configuration settings for the Engicam Is.IoT MX6UL Starter Kits.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __IMX6UL_ISIOT_CONFIG_H
-#define __IMX6UL_ISIOT_CONFIG_H
-
-#include <linux/sizes.h>
-#include "mx6_common.h"
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M)
-
-/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE SZ_128K
-
-/* Allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Environment */
-#ifndef CONFIG_ENV_IS_NOWHERE
-/* Environment in MMC */
-# if defined(CONFIG_ENV_IS_IN_MMC)
-# define CONFIG_ENV_OFFSET 0x100000
-/* Environment in NAND */
-# elif defined(CONFIG_ENV_IS_IN_NAND)
-# define CONFIG_ENV_OFFSET 0x400000
-# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-# endif
-#endif
-
-/* Default environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=uImage\0" \
- "fit_image=fit.itb\0" \
- "splashpos=m,m\0" \
- "fdt_high=0xffffffff\0" \
- "fdt_addr=" FDT_ADDR "\0" \
- "boot_fdt=try\0" \
- "mmcpart=1\0" \
- "nandroot=ubi0:rootfs rootfstype=ubifs\0" \
- "mmcautodetect=yes\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "ubiargs=setenv bootargs console=${console},${baudrate} " \
- "ubi.mtd=5 root=${nandroot} ${mtdparts}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "loadfit=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${fit_image}\0" \
- "fitboot=echo Booting FIT image from mmc ...; " \
- "run mmcargs; " \
- "bootm ${loadaddr}\0" \
- "_mmcboot=run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootm; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootm; " \
- "fi\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadfit; then " \
- "run fitboot; " \
- "else " \
- "if run loadimage; then " \
- "run _mmcboot; " \
- "fi; " \
- "fi; " \
- "fi; " \
- "fi\0" \
- "nandboot=echo Booting from nand ...; " \
- "if mtdparts; then " \
- "echo Starting nand boot ...; " \
- "else " \
- "mtdparts default; " \
- "fi; " \
- "run ubiargs; " \
- "nand read ${loadaddr} kernel 0x800000; " \
- "nand read ${fdt_addr} dtb 0x100000; " \
- "bootm ${loadaddr} - ${fdt_addr}\0"
-
-#define CONFIG_BOOTCOMMAND "run $modeboot"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_MEMTEST_START 0x80000000
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000)
-
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_SYS_HZ 1000
-
-#define DRAM_OFFSET(x) 0x87##x
-#define FDT_ADDR __stringify(DRAM_OFFSET(800000))
-
-/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_SP_OFFSET)
-
-/* FIT */
-#ifdef CONFIG_FIT
-# define CONFIG_HASH_VERIFY
-# define CONFIG_IMAGE_FORMAT_LEGACY
-#endif
-
-/* UART */
-#ifdef CONFIG_MXC_UART
-# define CONFIG_MXC_UART_BASE UART1_BASE
-#endif
-
-/* MMC */
-#ifdef CONFIG_FSL_USDHC
-# define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-/* NAND */
-#ifdef CONFIG_NAND_MXS
-# define CONFIG_SYS_MAX_NAND_DEVICE 1
-# define CONFIG_SYS_NAND_BASE 0x40000000
-# define CONFIG_SYS_NAND_5_ADDR_CYCLE
-# define CONFIG_SYS_NAND_ONFI_DETECTION
-# define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
-# define CONFIG_SYS_NAND_U_BOOT_OFFS 0x200000
-
-/* MTD device */
-# define CONFIG_MTD_DEVICE
-# define CONFIG_CMD_MTDPARTS
-# define CONFIG_MTD_PARTITIONS
-# define MTDIDS_DEFAULT "nand0=gpmi-nand"
-# define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:2m(spl),2m(uboot)," \
- "1m(env),8m(kernel),1m(dtb),-(rootfs)"
-
-/* UBI */
-# define CONFIG_CMD_UBIFS
-# define CONFIG_RBTREE
-# define CONFIG_LZO
-
-/* APBH DMA */
-# define CONFIG_APBH_DMA
-# define CONFIG_APBH_DMA_BURST
-# define CONFIG_APBH_DMA_BURST8
-#endif
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-# define CONFIG_FEC_MXC_PHYADDR 0
-# define CONFIG_FEC_XCV_TYPE RMII
-
-# define CONFIG_MII
-#endif
-
-/* SPL */
-#ifdef CONFIG_SPL
-# ifdef CONFIG_NAND_MXS
-# define CONFIG_SPL_NAND_SUPPORT
-# else
-# define CONFIG_SPL_MMC_SUPPORT
-# endif
-
-# include "imx6_spl.h"
-# ifdef CONFIG_SPL_BUILD
-# define CONFIG_SYS_FSL_USDHC_NUM 2
-# define CONFIG_SYS_FSL_ESDHC_ADDR 0
-# undef CONFIG_DM_GPIO
-# undef CONFIG_DM_MMC
-# endif
-#endif
-
-#endif /* __IMX6UL_ISIOT_CONFIG_H */
projects / u-boot / commitdiff