ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default

This patch reverts to use ge0_clk125 for eTSEC clock muxing. For SAI and
CAN which are pin multiplexed with RGMII1 in EC1 of RCW, ge2_clk125 will
be used via hwconfig.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 697d4ca4894b373d51bc7a44ad73b62402935519..afdccdc53766f73b5682711e1161681cd3ba0fab 100644 (file)
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -105,6 +105,8 @@ struct ccsr_gur {
 
 #define SCFG_ETSECDMAMCR_LE_BD_FR      0xf8001a0f
 #define SCFG_ETSECCMCR_GE2_CLK125      0x04000000
+#define SCFG_ETSECCMCR_GE0_CLK125      0x00000000
+#define SCFG_ETSECCMCR_GE1_CLK125      0x08000000
 #define SCFG_PIXCLKCR_PXCKEN           0x80000000
 #define SCFG_QSPI_CLKSEL               0xc0100000
 

diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 152da2d3e891c1641f2f75ba4c51962faf7f71f2..0a3252effe89376602033e57e1f04b682eb703c5 100644 (file)
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -48,6 +48,12 @@ enum {
        MUX_TYPE_SD_PC_SG_SG,
 };
 
+enum {
+       GE0_CLK125,
+       GE2_CLK125,
+       GE1_CLK125,
+};
+
 int checkboard(void)
 {
 #ifndef CONFIG_QSPI_BOOT
@@ -177,7 +183,6 @@ int board_early_init_f(void)
 
 #ifdef CONFIG_TSEC_ENET
        out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
-       out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
 #endif
 
 #ifdef CONFIG_FSL_IFC
@@ -241,6 +246,32 @@ void board_init_f(ulong dummy)
 }
 #endif
 
+void config_etseccm_source(int etsec_gtx_125_mux)
+{
+       struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+       switch (etsec_gtx_125_mux) {
+       case GE0_CLK125:
+               out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE0_CLK125);
+               debug("etseccm set to GE0_CLK125\n");
+               break;
+
+       case GE2_CLK125:
+               out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
+               debug("etseccm set to GE2_CLK125\n");
+               break;
+
+       case GE1_CLK125:
+               out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE1_CLK125);
+               debug("etseccm set to GE1_CLK125\n");
+               break;
+
+       default:
+               printf("Error! trying to set etseccm to invalid value\n");
+               break;
+       }
+}
+
 int config_board_mux(int ctrl_type)
 {
        u8 reg12, reg14;
@@ -250,6 +281,7 @@ int config_board_mux(int ctrl_type)
 
        switch (ctrl_type) {
        case MUX_TYPE_CAN:
+               config_etseccm_source(GE2_CLK125);
                reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
                break;
        case MUX_TYPE_IIC2:
@@ -259,6 +291,7 @@ int config_board_mux(int ctrl_type)
                reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
                break;
        case MUX_TYPE_SAI:
+               config_etseccm_source(GE2_CLK125);
                reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
                break;
        case MUX_TYPE_SDHC: