obj-$(CONFIG_LCD_DT_SIMPLEFB) += lcd_simplefb.o
obj-$(CONFIG_LYNXKDI) += lynxkdi.o
obj-$(CONFIG_MENU) += menu.o
-obj-$(CONFIG_SCSI) += scsi.o
obj-$(CONFIG_UPDATE_TFTP) += update.o
obj-$(CONFIG_DFU_TFTP) += update.o
obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
obj-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o
endif
-ifdef CONFIG_SPL_SATA_SUPPORT
-obj-$(CONFIG_SCSI) += scsi.o
-endif
endif
#environment
obj-y += env_common.o
+++ /dev/null
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <inttypes.h>
-#include <pci.h>
-#include <scsi.h>
-#include <dm/device-internal.h>
-#include <dm/uclass-internal.h>
-
-#if !defined(CONFIG_DM_SCSI)
-#ifdef CONFIG_SCSI_DEV_LIST
-#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
-#else
-#ifdef CONFIG_SATA_ULI5288
-
-#define SCSI_VEND_ID 0x10b9
-#define SCSI_DEV_ID 0x5288
-
-#elif !defined(CONFIG_SCSI_AHCI_PLAT)
-#error no scsi device defined
-#endif
-#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
-#endif
-#endif
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
-const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
-#endif
-static ccb tempccb; /* temporary scsi command buffer */
-
-static unsigned char tempbuff[512]; /* temporary data buffer */
-
-#if !defined(CONFIG_DM_SCSI)
-static int scsi_max_devs; /* number of highest available scsi device */
-
-static int scsi_curr_dev; /* current device */
-
-static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
-#endif
-
-/* almost the maximum amount of the scsi_ext command.. */
-#define SCSI_MAX_READ_BLK 0xFFFF
-#define SCSI_LBA48_READ 0xFFFFFFF
-
-static void scsi_print_error(ccb *pccb)
-{
- /* Dummy function that could print an error for debugging */
-}
-
-#ifdef CONFIG_SYS_64BIT_LBA
-void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks)
-{
- pccb->cmd[0] = SCSI_READ16;
- pccb->cmd[1] = pccb->lun << 5;
- pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff;
- pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff;
- pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff;
- pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff;
- pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff;
- pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff;
- pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff;
- pccb->cmd[9] = (unsigned char)start & 0xff;
- pccb->cmd[10] = 0;
- pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff;
- pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff;
- pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff;
- pccb->cmd[14] = (unsigned char)blocks & 0xff;
- pccb->cmd[15] = 0;
- pccb->cmdlen = 16;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
- debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n",
- pccb->cmd[0], pccb->cmd[1],
- pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
- pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9],
- pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]);
-}
-#endif
-
-static void scsi_setup_read_ext(ccb *pccb, lbaint_t start,
- unsigned short blocks)
-{
- pccb->cmd[0] = SCSI_READ10;
- pccb->cmd[1] = pccb->lun << 5;
- pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
- pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
- pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
- pccb->cmd[5] = (unsigned char)start & 0xff;
- pccb->cmd[6] = 0;
- pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff;
- pccb->cmd[8] = (unsigned char)blocks & 0xff;
- pccb->cmd[6] = 0;
- pccb->cmdlen = 10;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
- debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
- pccb->cmd[0], pccb->cmd[1],
- pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
- pccb->cmd[7], pccb->cmd[8]);
-}
-
-static void scsi_setup_write_ext(ccb *pccb, lbaint_t start,
- unsigned short blocks)
-{
- pccb->cmd[0] = SCSI_WRITE10;
- pccb->cmd[1] = pccb->lun << 5;
- pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
- pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
- pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
- pccb->cmd[5] = (unsigned char)start & 0xff;
- pccb->cmd[6] = 0;
- pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff;
- pccb->cmd[8] = (unsigned char)blocks & 0xff;
- pccb->cmd[9] = 0;
- pccb->cmdlen = 10;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
- debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
- __func__,
- pccb->cmd[0], pccb->cmd[1],
- pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
- pccb->cmd[7], pccb->cmd[8]);
-}
-
-static void scsi_setup_inquiry(ccb *pccb)
-{
- pccb->cmd[0] = SCSI_INQUIRY;
- pccb->cmd[1] = pccb->lun << 5;
- pccb->cmd[2] = 0;
- pccb->cmd[3] = 0;
- if (pccb->datalen > 255)
- pccb->cmd[4] = 255;
- else
- pccb->cmd[4] = (unsigned char)pccb->datalen;
- pccb->cmd[5] = 0;
- pccb->cmdlen = 6;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
-}
-
-#ifdef CONFIG_BLK
-static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
- void *buffer)
-#else
-static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr,
- lbaint_t blkcnt, void *buffer)
-#endif
-{
-#ifdef CONFIG_BLK
- struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
-#endif
- lbaint_t start, blks;
- uintptr_t buf_addr;
- unsigned short smallblks = 0;
- ccb *pccb = (ccb *)&tempccb;
-
- /* Setup device */
- pccb->target = block_dev->target;
- pccb->lun = block_dev->lun;
- buf_addr = (unsigned long)buffer;
- start = blknr;
- blks = blkcnt;
- debug("\nscsi_read: dev %d startblk " LBAF
- ", blccnt " LBAF " buffer %lx\n",
- block_dev->devnum, start, blks, (unsigned long)buffer);
- do {
- pccb->pdata = (unsigned char *)buf_addr;
-#ifdef CONFIG_SYS_64BIT_LBA
- if (start > SCSI_LBA48_READ) {
- unsigned long blocks;
- blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK);
- pccb->datalen = block_dev->blksz * blocks;
- scsi_setup_read16(pccb, start, blocks);
- start += blocks;
- blks -= blocks;
- } else
-#endif
- if (blks > SCSI_MAX_READ_BLK) {
- pccb->datalen = block_dev->blksz *
- SCSI_MAX_READ_BLK;
- smallblks = SCSI_MAX_READ_BLK;
- scsi_setup_read_ext(pccb, start, smallblks);
- start += SCSI_MAX_READ_BLK;
- blks -= SCSI_MAX_READ_BLK;
- } else {
- pccb->datalen = block_dev->blksz * blks;
- smallblks = (unsigned short)blks;
- scsi_setup_read_ext(pccb, start, smallblks);
- start += blks;
- blks = 0;
- }
- debug("scsi_read_ext: startblk " LBAF
- ", blccnt %x buffer %" PRIXPTR "\n",
- start, smallblks, buf_addr);
- if (scsi_exec(pccb) != true) {
- scsi_print_error(pccb);
- blkcnt -= blks;
- break;
- }
- buf_addr += pccb->datalen;
- } while (blks != 0);
- debug("scsi_read_ext: end startblk " LBAF
- ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr);
- return blkcnt;
-}
-
-/*******************************************************************************
- * scsi_write
- */
-
-/* Almost the maximum amount of the scsi_ext command.. */
-#define SCSI_MAX_WRITE_BLK 0xFFFF
-
-#ifdef CONFIG_BLK
-static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
- const void *buffer)
-#else
-static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr,
- lbaint_t blkcnt, const void *buffer)
-#endif
-{
-#ifdef CONFIG_BLK
- struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
-#endif
- lbaint_t start, blks;
- uintptr_t buf_addr;
- unsigned short smallblks;
- ccb *pccb = (ccb *)&tempccb;
-
- /* Setup device */
- pccb->target = block_dev->target;
- pccb->lun = block_dev->lun;
- buf_addr = (unsigned long)buffer;
- start = blknr;
- blks = blkcnt;
- debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
- __func__, block_dev->devnum, start, blks, (unsigned long)buffer);
- do {
- pccb->pdata = (unsigned char *)buf_addr;
- if (blks > SCSI_MAX_WRITE_BLK) {
- pccb->datalen = (block_dev->blksz *
- SCSI_MAX_WRITE_BLK);
- smallblks = SCSI_MAX_WRITE_BLK;
- scsi_setup_write_ext(pccb, start, smallblks);
- start += SCSI_MAX_WRITE_BLK;
- blks -= SCSI_MAX_WRITE_BLK;
- } else {
- pccb->datalen = block_dev->blksz * blks;
- smallblks = (unsigned short)blks;
- scsi_setup_write_ext(pccb, start, smallblks);
- start += blks;
- blks = 0;
- }
- debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
- __func__, start, smallblks, buf_addr);
- if (scsi_exec(pccb) != true) {
- scsi_print_error(pccb);
- blkcnt -= blks;
- break;
- }
- buf_addr += pccb->datalen;
- } while (blks != 0);
- debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
- __func__, start, smallblks, buf_addr);
- return blkcnt;
-}
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
-void scsi_init(void)
-{
- int busdevfunc = -1;
- int i;
- /*
- * Find a device from the list, this driver will support a single
- * controller.
- */
- for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
- /* get PCI Device ID */
-#ifdef CONFIG_DM_PCI
- struct udevice *dev;
- int ret;
-
- ret = dm_pci_find_device(scsi_device_list[i].vendor,
- scsi_device_list[i].device, 0, &dev);
- if (!ret) {
- busdevfunc = dm_pci_get_bdf(dev);
- break;
- }
-#else
- busdevfunc = pci_find_device(scsi_device_list[i].vendor,
- scsi_device_list[i].device,
- 0);
-#endif
- if (busdevfunc != -1)
- break;
- }
-
- if (busdevfunc == -1) {
- printf("Error: SCSI Controller(s) ");
- for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
- printf("%04X:%04X ",
- scsi_device_list[i].vendor,
- scsi_device_list[i].device);
- }
- printf("not found\n");
- return;
- }
-#ifdef DEBUG
- else {
- printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
- scsi_device_list[i].vendor,
- scsi_device_list[i].device,
- (busdevfunc >> 16) & 0xFF,
- (busdevfunc >> 11) & 0x1F,
- (busdevfunc >> 8) & 0x7);
- }
-#endif
- bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci");
- scsi_low_level_init(busdevfunc);
- scsi_scan(1);
- bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI);
-}
-#endif
-
-/* copy src to dest, skipping leading and trailing blanks
- * and null terminate the string
- */
-static void scsi_ident_cpy(unsigned char *dest, unsigned char *src,
- unsigned int len)
-{
- int start, end;
-
- start = 0;
- while (start < len) {
- if (src[start] != ' ')
- break;
- start++;
- }
- end = len-1;
- while (end > start) {
- if (src[end] != ' ')
- break;
- end--;
- }
- for (; start <= end; start++)
- *dest ++= src[start];
- *dest = '\0';
-}
-
-static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity,
- unsigned long *blksz)
-{
- *capacity = 0;
-
- memset(pccb->cmd, '\0', sizeof(pccb->cmd));
- pccb->cmd[0] = SCSI_RD_CAPAC10;
- pccb->cmd[1] = pccb->lun << 5;
- pccb->cmdlen = 10;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
-
- pccb->datalen = 8;
- if (scsi_exec(pccb) != true)
- return 1;
-
- *capacity = ((lbaint_t)pccb->pdata[0] << 24) |
- ((lbaint_t)pccb->pdata[1] << 16) |
- ((lbaint_t)pccb->pdata[2] << 8) |
- ((lbaint_t)pccb->pdata[3]);
-
- if (*capacity != 0xffffffff) {
- /* Read capacity (10) was sufficient for this drive. */
- *blksz = ((unsigned long)pccb->pdata[4] << 24) |
- ((unsigned long)pccb->pdata[5] << 16) |
- ((unsigned long)pccb->pdata[6] << 8) |
- ((unsigned long)pccb->pdata[7]);
- return 0;
- }
-
- /* Read capacity (10) was insufficient. Use read capacity (16). */
- memset(pccb->cmd, '\0', sizeof(pccb->cmd));
- pccb->cmd[0] = SCSI_RD_CAPAC16;
- pccb->cmd[1] = 0x10;
- pccb->cmdlen = 16;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
-
- pccb->datalen = 16;
- if (scsi_exec(pccb) != true)
- return 1;
-
- *capacity = ((uint64_t)pccb->pdata[0] << 56) |
- ((uint64_t)pccb->pdata[1] << 48) |
- ((uint64_t)pccb->pdata[2] << 40) |
- ((uint64_t)pccb->pdata[3] << 32) |
- ((uint64_t)pccb->pdata[4] << 24) |
- ((uint64_t)pccb->pdata[5] << 16) |
- ((uint64_t)pccb->pdata[6] << 8) |
- ((uint64_t)pccb->pdata[7]);
-
- *blksz = ((uint64_t)pccb->pdata[8] << 56) |
- ((uint64_t)pccb->pdata[9] << 48) |
- ((uint64_t)pccb->pdata[10] << 40) |
- ((uint64_t)pccb->pdata[11] << 32) |
- ((uint64_t)pccb->pdata[12] << 24) |
- ((uint64_t)pccb->pdata[13] << 16) |
- ((uint64_t)pccb->pdata[14] << 8) |
- ((uint64_t)pccb->pdata[15]);
-
- return 0;
-}
-
-
-/*
- * Some setup (fill-in) routines
- */
-static void scsi_setup_test_unit_ready(ccb *pccb)
-{
- pccb->cmd[0] = SCSI_TST_U_RDY;
- pccb->cmd[1] = pccb->lun << 5;
- pccb->cmd[2] = 0;
- pccb->cmd[3] = 0;
- pccb->cmd[4] = 0;
- pccb->cmd[5] = 0;
- pccb->cmdlen = 6;
- pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
-}
-
-/**
- * scsi_init_dev_desc_priv - initialize only SCSI specific blk_desc properties
- *
- * @dev_desc: Block device description pointer
- */
-static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc)
-{
- dev_desc->target = 0xff;
- dev_desc->lun = 0xff;
- dev_desc->log2blksz =
- LOG2_INVALID(typeof(dev_desc->log2blksz));
- dev_desc->type = DEV_TYPE_UNKNOWN;
- dev_desc->vendor[0] = 0;
- dev_desc->product[0] = 0;
- dev_desc->revision[0] = 0;
- dev_desc->removable = false;
-#ifndef CONFIG_BLK
- dev_desc->block_read = scsi_read;
- dev_desc->block_write = scsi_write;
-#endif
-}
-
-#if !defined(CONFIG_DM_SCSI)
-/**
- * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties
- *
- * @dev_desc: Block device description pointer
- * @devnum: Device number
- */
-static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum)
-{
- dev_desc->lba = 0;
- dev_desc->blksz = 0;
- dev_desc->if_type = IF_TYPE_SCSI;
- dev_desc->devnum = devnum;
- dev_desc->part_type = PART_TYPE_UNKNOWN;
-
- scsi_init_dev_desc_priv(dev_desc);
-}
-#endif
-
-/**
- * scsi_detect_dev - Detect scsi device
- *
- * @target: target id
- * @lun: target lun
- * @dev_desc: block device description
- *
- * The scsi_detect_dev detects and fills a dev_desc structure when the device is
- * detected.
- *
- * Return: 0 on success, error value otherwise
- */
-static int scsi_detect_dev(int target, int lun, struct blk_desc *dev_desc)
-{
- unsigned char perq, modi;
- lbaint_t capacity;
- unsigned long blksz;
- ccb *pccb = (ccb *)&tempccb;
-
- pccb->target = target;
- pccb->lun = lun;
- pccb->pdata = (unsigned char *)&tempbuff;
- pccb->datalen = 512;
- scsi_setup_inquiry(pccb);
- if (scsi_exec(pccb) != true) {
- if (pccb->contr_stat == SCSI_SEL_TIME_OUT) {
- /*
- * selection timeout => assuming no
- * device present
- */
- debug("Selection timeout ID %d\n",
- pccb->target);
- return -ETIMEDOUT;
- }
- scsi_print_error(pccb);
- return -ENODEV;
- }
- perq = tempbuff[0];
- modi = tempbuff[1];
- if ((perq & 0x1f) == 0x1f)
- return -ENODEV; /* skip unknown devices */
- if ((modi & 0x80) == 0x80) /* drive is removable */
- dev_desc->removable = true;
- /* get info for this device */
- scsi_ident_cpy((unsigned char *)dev_desc->vendor,
- &tempbuff[8], 8);
- scsi_ident_cpy((unsigned char *)dev_desc->product,
- &tempbuff[16], 16);
- scsi_ident_cpy((unsigned char *)dev_desc->revision,
- &tempbuff[32], 4);
- dev_desc->target = pccb->target;
- dev_desc->lun = pccb->lun;
-
- pccb->datalen = 0;
- scsi_setup_test_unit_ready(pccb);
- if (scsi_exec(pccb) != true) {
- if (dev_desc->removable) {
- dev_desc->type = perq;
- goto removable;
- }
- scsi_print_error(pccb);
- return -EINVAL;
- }
- if (scsi_read_capacity(pccb, &capacity, &blksz)) {
- scsi_print_error(pccb);
- return -EINVAL;
- }
- dev_desc->lba = capacity;
- dev_desc->blksz = blksz;
- dev_desc->log2blksz = LOG2(dev_desc->blksz);
- dev_desc->type = perq;
-removable:
- return 0;
-}
-
-/*
- * (re)-scan the scsi bus and reports scsi device info
- * to the user if mode = 1
- */
-#if defined(CONFIG_DM_SCSI)
-static int do_scsi_scan_one(struct udevice *dev, int id, int lun, int mode)
-{
- int ret;
- struct udevice *bdev;
- struct blk_desc bd;
- struct blk_desc *bdesc;
- char str[10];
-
- /*
- * detect the scsi driver to get information about its geometry (block
- * size, number of blocks) and other parameters (ids, type, ...)
- */
- scsi_init_dev_desc_priv(&bd);
- if (scsi_detect_dev(id, lun, &bd))
- return -ENODEV;
-
- /*
- * Create only one block device and do detection
- * to make sure that there won't be a lot of
- * block devices created
- */
- snprintf(str, sizeof(str), "id%dlun%d", id, lun);
- ret = blk_create_devicef(dev, "scsi_blk", str, IF_TYPE_SCSI, -1,
- bd.blksz, bd.blksz * bd.lba, &bdev);
- if (ret) {
- debug("Can't create device\n");
- return ret;
- }
-
- bdesc = dev_get_uclass_platdata(bdev);
- bdesc->target = id;
- bdesc->lun = lun;
- bdesc->removable = bd.removable;
- bdesc->type = bd.type;
- memcpy(&bdesc->vendor, &bd.vendor, sizeof(bd.vendor));
- memcpy(&bdesc->product, &bd.product, sizeof(bd.product));
- memcpy(&bdesc->revision, &bd.revision, sizeof(bd.revision));
- part_init(bdesc);
-
- if (mode == 1) {
- printf(" Device %d: ", 0);
- dev_print(bdesc);
- }
- return 0;
-}
-
-int scsi_scan(int mode)
-{
- unsigned char i, lun;
- struct uclass *uc;
- struct udevice *dev; /* SCSI controller */
- int ret;
-
- if (mode == 1)
- printf("scanning bus for devices...\n");
-
- blk_unbind_all(IF_TYPE_SCSI);
-
- ret = uclass_get(UCLASS_SCSI, &uc);
- if (ret)
- return ret;
-
- uclass_foreach_dev(dev, uc) {
- struct scsi_platdata *plat; /* scsi controller platdata */
-
- /* probe SCSI controller driver */
- ret = device_probe(dev);
- if (ret)
- return ret;
-
- /* Get controller platdata */
- plat = dev_get_platdata(dev);
-
- for (i = 0; i < plat->max_id; i++)
- for (lun = 0; lun < plat->max_lun; lun++)
- do_scsi_scan_one(dev, i, lun, mode);
- }
-
- return 0;
-}
-#else
-int scsi_scan(int mode)
-{
- unsigned char i, lun;
- int ret;
-
- if (mode == 1)
- printf("scanning bus for devices...\n");
- for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++)
- scsi_init_dev_desc(&scsi_dev_desc[i], i);
-
- scsi_max_devs = 0;
- for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
- for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) {
- ret = scsi_detect_dev(i, lun,
- &scsi_dev_desc[scsi_max_devs]);
- if (ret)
- continue;
- part_init(&scsi_dev_desc[scsi_max_devs]);
-
- if (mode == 1) {
- printf(" Device %d: ", 0);
- dev_print(&scsi_dev_desc[scsi_max_devs]);
- } /* if mode */
- scsi_max_devs++;
- } /* next LUN */
- }
- if (scsi_max_devs > 0)
- scsi_curr_dev = 0;
- else
- scsi_curr_dev = -1;
-
- printf("Found %d device(s).\n", scsi_max_devs);
-#ifndef CONFIG_SPL_BUILD
- setenv_ulong("scsidevs", scsi_max_devs);
-#endif
- return 0;
-}
-#endif
-
-#ifdef CONFIG_BLK
-static const struct blk_ops scsi_blk_ops = {
- .read = scsi_read,
- .write = scsi_write,
-};
-
-U_BOOT_DRIVER(scsi_blk) = {
- .name = "scsi_blk",
- .id = UCLASS_BLK,
- .ops = &scsi_blk_ops,
-};
-#else
-U_BOOT_LEGACY_BLK(scsi) = {
- .if_typename = "scsi",
- .if_type = IF_TYPE_SCSI,
- .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE,
- .desc = scsi_dev_desc,
-};
-#endif
source "drivers/rtc/Kconfig"
+source "drivers/scsi/Kconfig"
+
source "drivers/serial/Kconfig"
source "drivers/sound/Kconfig"
obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
-obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/
obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += block/
obj-$(CONFIG_SPL_MMC_SUPPORT) += block/
endif
obj-$(CONFIG_X86) += pch/
obj-y += phy/marvell/
obj-y += rtc/
+obj-y += scsi/
obj-y += sound/
obj-y += spmi/
obj-y += sysreset/
be partitioned into several areas, called 'partitions' in U-Boot.
A filesystem can be placed in each partition.
-config SCSI
- bool "Support SCSI controllers"
- help
- This enables support for SCSI (Small Computer System Interface),
- a parallel interface widely used with storage peripherals such as
- hard drives and optical drives. The SCSI standards define physical
- interfaces as well as protocols for controlling devices and
- tranferring data.
-
-config DM_SCSI
- bool "Support SCSI controllers with driver model"
- depends on BLK
- help
- This option enables the SCSI (Small Computer System Interface) uclass
- which supports SCSI and SATA HDDs. For every device configuration
- (IDs/LUNs) a block device is created with RAW read/write and
- filesystem support.
-
config BLOCK_CACHE
bool "Use block device cache"
default n
obj-$(CONFIG_IDE) += ide.o
obj-$(CONFIG_IDE_FTIDE020) += ftide020.o
-obj-$(CONFIG_SANDBOX) += sandbox.o sandbox_scsi.o
+obj-$(CONFIG_SANDBOX) += sandbox.o
obj-$(CONFIG_SYSTEMACE) += systemace.o
obj-$(CONFIG_BLOCK_CACHE) += blkcache.o
+++ /dev/null
-/*
- * Copyright (C) 2015 Google, Inc
- * Written by Simon Glass <sjg@chromium.org>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * This file contains dummy implementations of SCSI functions requried so
- * that CONFIG_SCSI can be enabled for sandbox.
- */
-
-#include <common.h>
-#include <scsi.h>
-
-void scsi_bus_reset(void)
-{
-}
-
-void scsi_init(void)
-{
-}
-
-int scsi_exec(ccb *pccb)
-{
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (c) 2015 Google, Inc
- * Written by Simon Glass <sjg@chromium.org>
- * Copyright (c) 2016 Xilinx, Inc
- * Written by Michal Simek
- *
- * Based on ahci-uclass.c
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <scsi.h>
-
-static int scsi_post_probe(struct udevice *dev)
-{
- debug("%s: device %p\n", __func__, dev);
- scsi_low_level_init(0, dev);
- return 0;
-}
-
-UCLASS_DRIVER(scsi) = {
- .id = UCLASS_SCSI,
- .name = "scsi",
- .post_probe = scsi_post_probe,
-};
--- /dev/null
+config SCSI
+ bool "Support SCSI controllers"
+ help
+ This enables support for SCSI (Small Computer System Interface),
+ a parallel interface widely used with storage peripherals such as
+ hard drives and optical drives. The SCSI standards define physical
+ interfaces as well as protocols for controlling devices and
+ tranferring data.
+
+config DM_SCSI
+ bool "Support SCSI controllers with driver model"
+ depends on BLK
+ help
+ This option enables the SCSI (Small Computer System Interface) uclass
+ which supports SCSI and SATA HDDs. For every device configuration
+ (IDs/LUNs) a block device is created with RAW read/write and
+ filesystem support.
--- /dev/null
+#
+# (C) Copyright 2000-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifndef CONFIG_SPL_BUILD
+obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
+obj-$(CONFIG_SCSI) += scsi.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_SATA_SUPPORT
+obj-$(CONFIG_DM_SCSI) += scsi-uclass.o
+obj-$(CONFIG_SCSI) += scsi.o
+endif
+endif
+
+obj-$(CONFIG_SANDBOX) += sandbox_scsi.o
--- /dev/null
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * This file contains dummy implementations of SCSI functions requried so
+ * that CONFIG_SCSI can be enabled for sandbox.
+ */
+
+#include <common.h>
+#include <scsi.h>
+
+void scsi_bus_reset(void)
+{
+}
+
+void scsi_init(void)
+{
+}
+
+int scsi_exec(ccb *pccb)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ * Copyright (c) 2016 Xilinx, Inc
+ * Written by Michal Simek
+ *
+ * Based on ahci-uclass.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <scsi.h>
+
+static int scsi_post_probe(struct udevice *dev)
+{
+ debug("%s: device %p\n", __func__, dev);
+ scsi_low_level_init(0, dev);
+ return 0;
+}
+
+UCLASS_DRIVER(scsi) = {
+ .id = UCLASS_SCSI,
+ .name = "scsi",
+ .post_probe = scsi_post_probe,
+};
--- /dev/null
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <inttypes.h>
+#include <pci.h>
+#include <scsi.h>
+#include <dm/device-internal.h>
+#include <dm/uclass-internal.h>
+
+#if !defined(CONFIG_DM_SCSI)
+#ifdef CONFIG_SCSI_DEV_LIST
+#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
+#else
+#ifdef CONFIG_SATA_ULI5288
+
+#define SCSI_VEND_ID 0x10b9
+#define SCSI_DEV_ID 0x5288
+
+#elif !defined(CONFIG_SCSI_AHCI_PLAT)
+#error no scsi device defined
+#endif
+#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#endif
+#endif
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
+const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
+#endif
+static ccb tempccb; /* temporary scsi command buffer */
+
+static unsigned char tempbuff[512]; /* temporary data buffer */
+
+#if !defined(CONFIG_DM_SCSI)
+static int scsi_max_devs; /* number of highest available scsi device */
+
+static int scsi_curr_dev; /* current device */
+
+static struct blk_desc scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE];
+#endif
+
+/* almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_READ_BLK 0xFFFF
+#define SCSI_LBA48_READ 0xFFFFFFF
+
+static void scsi_print_error(ccb *pccb)
+{
+ /* Dummy function that could print an error for debugging */
+}
+
+#ifdef CONFIG_SYS_64BIT_LBA
+void scsi_setup_read16(ccb *pccb, lbaint_t start, unsigned long blocks)
+{
+ pccb->cmd[0] = SCSI_READ16;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = (unsigned char)(start >> 56) & 0xff;
+ pccb->cmd[3] = (unsigned char)(start >> 48) & 0xff;
+ pccb->cmd[4] = (unsigned char)(start >> 40) & 0xff;
+ pccb->cmd[5] = (unsigned char)(start >> 32) & 0xff;
+ pccb->cmd[6] = (unsigned char)(start >> 24) & 0xff;
+ pccb->cmd[7] = (unsigned char)(start >> 16) & 0xff;
+ pccb->cmd[8] = (unsigned char)(start >> 8) & 0xff;
+ pccb->cmd[9] = (unsigned char)start & 0xff;
+ pccb->cmd[10] = 0;
+ pccb->cmd[11] = (unsigned char)(blocks >> 24) & 0xff;
+ pccb->cmd[12] = (unsigned char)(blocks >> 16) & 0xff;
+ pccb->cmd[13] = (unsigned char)(blocks >> 8) & 0xff;
+ pccb->cmd[14] = (unsigned char)blocks & 0xff;
+ pccb->cmd[15] = 0;
+ pccb->cmdlen = 16;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug("scsi_setup_read16: cmd: %02X %02X startblk %02X%02X%02X%02X%02X%02X%02X%02X blccnt %02X%02X%02X%02X\n",
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[6], pccb->cmd[7], pccb->cmd[8], pccb->cmd[9],
+ pccb->cmd[11], pccb->cmd[12], pccb->cmd[13], pccb->cmd[14]);
+}
+#endif
+
+static void scsi_setup_read_ext(ccb *pccb, lbaint_t start,
+ unsigned short blocks)
+{
+ pccb->cmd[0] = SCSI_READ10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
+ pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
+ pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
+ pccb->cmd[5] = (unsigned char)start & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmd[7] = (unsigned char)(blocks >> 8) & 0xff;
+ pccb->cmd[8] = (unsigned char)blocks & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug("scsi_setup_read_ext: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[7], pccb->cmd[8]);
+}
+
+static void scsi_setup_write_ext(ccb *pccb, lbaint_t start,
+ unsigned short blocks)
+{
+ pccb->cmd[0] = SCSI_WRITE10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
+ pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
+ pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;
+ pccb->cmd[5] = (unsigned char)start & 0xff;
+ pccb->cmd[6] = 0;
+ pccb->cmd[7] = ((unsigned char)(blocks >> 8)) & 0xff;
+ pccb->cmd[8] = (unsigned char)blocks & 0xff;
+ pccb->cmd[9] = 0;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+ debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+ __func__,
+ pccb->cmd[0], pccb->cmd[1],
+ pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+ pccb->cmd[7], pccb->cmd[8]);
+}
+
+static void scsi_setup_inquiry(ccb *pccb)
+{
+ pccb->cmd[0] = SCSI_INQUIRY;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = 0;
+ pccb->cmd[3] = 0;
+ if (pccb->datalen > 255)
+ pccb->cmd[4] = 255;
+ else
+ pccb->cmd[4] = (unsigned char)pccb->datalen;
+ pccb->cmd[5] = 0;
+ pccb->cmdlen = 6;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+}
+
+#ifdef CONFIG_BLK
+static ulong scsi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
+ void *buffer)
+#else
+static ulong scsi_read(struct blk_desc *block_dev, lbaint_t blknr,
+ lbaint_t blkcnt, void *buffer)
+#endif
+{
+#ifdef CONFIG_BLK
+ struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
+#endif
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
+ unsigned short smallblks = 0;
+ ccb *pccb = (ccb *)&tempccb;
+
+ /* Setup device */
+ pccb->target = block_dev->target;
+ pccb->lun = block_dev->lun;
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ debug("\nscsi_read: dev %d startblk " LBAF
+ ", blccnt " LBAF " buffer %lx\n",
+ block_dev->devnum, start, blks, (unsigned long)buffer);
+ do {
+ pccb->pdata = (unsigned char *)buf_addr;
+#ifdef CONFIG_SYS_64BIT_LBA
+ if (start > SCSI_LBA48_READ) {
+ unsigned long blocks;
+ blocks = min_t(lbaint_t, blks, SCSI_MAX_READ_BLK);
+ pccb->datalen = block_dev->blksz * blocks;
+ scsi_setup_read16(pccb, start, blocks);
+ start += blocks;
+ blks -= blocks;
+ } else
+#endif
+ if (blks > SCSI_MAX_READ_BLK) {
+ pccb->datalen = block_dev->blksz *
+ SCSI_MAX_READ_BLK;
+ smallblks = SCSI_MAX_READ_BLK;
+ scsi_setup_read_ext(pccb, start, smallblks);
+ start += SCSI_MAX_READ_BLK;
+ blks -= SCSI_MAX_READ_BLK;
+ } else {
+ pccb->datalen = block_dev->blksz * blks;
+ smallblks = (unsigned short)blks;
+ scsi_setup_read_ext(pccb, start, smallblks);
+ start += blks;
+ blks = 0;
+ }
+ debug("scsi_read_ext: startblk " LBAF
+ ", blccnt %x buffer %" PRIXPTR "\n",
+ start, smallblks, buf_addr);
+ if (scsi_exec(pccb) != true) {
+ scsi_print_error(pccb);
+ blkcnt -= blks;
+ break;
+ }
+ buf_addr += pccb->datalen;
+ } while (blks != 0);
+ debug("scsi_read_ext: end startblk " LBAF
+ ", blccnt %x buffer %" PRIXPTR "\n", start, smallblks, buf_addr);
+ return blkcnt;
+}
+
+/*******************************************************************************
+ * scsi_write
+ */
+
+/* Almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_WRITE_BLK 0xFFFF
+
+#ifdef CONFIG_BLK
+static ulong scsi_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
+ const void *buffer)
+#else
+static ulong scsi_write(struct blk_desc *block_dev, lbaint_t blknr,
+ lbaint_t blkcnt, const void *buffer)
+#endif
+{
+#ifdef CONFIG_BLK
+ struct blk_desc *block_dev = dev_get_uclass_platdata(dev);
+#endif
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
+ unsigned short smallblks;
+ ccb *pccb = (ccb *)&tempccb;
+
+ /* Setup device */
+ pccb->target = block_dev->target;
+ pccb->lun = block_dev->lun;
+ buf_addr = (unsigned long)buffer;
+ start = blknr;
+ blks = blkcnt;
+ debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
+ __func__, block_dev->devnum, start, blks, (unsigned long)buffer);
+ do {
+ pccb->pdata = (unsigned char *)buf_addr;
+ if (blks > SCSI_MAX_WRITE_BLK) {
+ pccb->datalen = (block_dev->blksz *
+ SCSI_MAX_WRITE_BLK);
+ smallblks = SCSI_MAX_WRITE_BLK;
+ scsi_setup_write_ext(pccb, start, smallblks);
+ start += SCSI_MAX_WRITE_BLK;
+ blks -= SCSI_MAX_WRITE_BLK;
+ } else {
+ pccb->datalen = block_dev->blksz * blks;
+ smallblks = (unsigned short)blks;
+ scsi_setup_write_ext(pccb, start, smallblks);
+ start += blks;
+ blks = 0;
+ }
+ debug("%s: startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
+ __func__, start, smallblks, buf_addr);
+ if (scsi_exec(pccb) != true) {
+ scsi_print_error(pccb);
+ blkcnt -= blks;
+ break;
+ }
+ buf_addr += pccb->datalen;
+ } while (blks != 0);
+ debug("%s: end startblk " LBAF ", blccnt %x buffer %" PRIXPTR "\n",
+ __func__, start, smallblks, buf_addr);
+ return blkcnt;
+}
+
+#if defined(CONFIG_PCI) && !defined(CONFIG_SCSI_AHCI_PLAT)
+void scsi_init(void)
+{
+ int busdevfunc = -1;
+ int i;
+ /*
+ * Find a device from the list, this driver will support a single
+ * controller.
+ */
+ for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+ /* get PCI Device ID */
+#ifdef CONFIG_DM_PCI
+ struct udevice *dev;
+ int ret;
+
+ ret = dm_pci_find_device(scsi_device_list[i].vendor,
+ scsi_device_list[i].device, 0, &dev);
+ if (!ret) {
+ busdevfunc = dm_pci_get_bdf(dev);
+ break;
+ }
+#else
+ busdevfunc = pci_find_device(scsi_device_list[i].vendor,
+ scsi_device_list[i].device,
+ 0);
+#endif
+ if (busdevfunc != -1)
+ break;
+ }
+
+ if (busdevfunc == -1) {
+ printf("Error: SCSI Controller(s) ");
+ for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+ printf("%04X:%04X ",
+ scsi_device_list[i].vendor,
+ scsi_device_list[i].device);
+ }
+ printf("not found\n");
+ return;
+ }
+#ifdef DEBUG
+ else {
+ printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
+ scsi_device_list[i].vendor,
+ scsi_device_list[i].device,
+ (busdevfunc >> 16) & 0xFF,
+ (busdevfunc >> 11) & 0x1F,
+ (busdevfunc >> 8) & 0x7);
+ }
+#endif
+ bootstage_start(BOOTSTAGE_ID_ACCUM_SCSI, "ahci");
+ scsi_low_level_init(busdevfunc);
+ scsi_scan(1);
+ bootstage_accum(BOOTSTAGE_ID_ACCUM_SCSI);
+}
+#endif
+
+/* copy src to dest, skipping leading and trailing blanks
+ * and null terminate the string
+ */
+static void scsi_ident_cpy(unsigned char *dest, unsigned char *src,
+ unsigned int len)
+{
+ int start, end;
+
+ start = 0;
+ while (start < len) {
+ if (src[start] != ' ')
+ break;
+ start++;
+ }
+ end = len-1;
+ while (end > start) {
+ if (src[end] != ' ')
+ break;
+ end--;
+ }
+ for (; start <= end; start++)
+ *dest ++= src[start];
+ *dest = '\0';
+}
+
+static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity,
+ unsigned long *blksz)
+{
+ *capacity = 0;
+
+ memset(pccb->cmd, '\0', sizeof(pccb->cmd));
+ pccb->cmd[0] = SCSI_RD_CAPAC10;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmdlen = 10;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+ pccb->datalen = 8;
+ if (scsi_exec(pccb) != true)
+ return 1;
+
+ *capacity = ((lbaint_t)pccb->pdata[0] << 24) |
+ ((lbaint_t)pccb->pdata[1] << 16) |
+ ((lbaint_t)pccb->pdata[2] << 8) |
+ ((lbaint_t)pccb->pdata[3]);
+
+ if (*capacity != 0xffffffff) {
+ /* Read capacity (10) was sufficient for this drive. */
+ *blksz = ((unsigned long)pccb->pdata[4] << 24) |
+ ((unsigned long)pccb->pdata[5] << 16) |
+ ((unsigned long)pccb->pdata[6] << 8) |
+ ((unsigned long)pccb->pdata[7]);
+ return 0;
+ }
+
+ /* Read capacity (10) was insufficient. Use read capacity (16). */
+ memset(pccb->cmd, '\0', sizeof(pccb->cmd));
+ pccb->cmd[0] = SCSI_RD_CAPAC16;
+ pccb->cmd[1] = 0x10;
+ pccb->cmdlen = 16;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+ pccb->datalen = 16;
+ if (scsi_exec(pccb) != true)
+ return 1;
+
+ *capacity = ((uint64_t)pccb->pdata[0] << 56) |
+ ((uint64_t)pccb->pdata[1] << 48) |
+ ((uint64_t)pccb->pdata[2] << 40) |
+ ((uint64_t)pccb->pdata[3] << 32) |
+ ((uint64_t)pccb->pdata[4] << 24) |
+ ((uint64_t)pccb->pdata[5] << 16) |
+ ((uint64_t)pccb->pdata[6] << 8) |
+ ((uint64_t)pccb->pdata[7]);
+
+ *blksz = ((uint64_t)pccb->pdata[8] << 56) |
+ ((uint64_t)pccb->pdata[9] << 48) |
+ ((uint64_t)pccb->pdata[10] << 40) |
+ ((uint64_t)pccb->pdata[11] << 32) |
+ ((uint64_t)pccb->pdata[12] << 24) |
+ ((uint64_t)pccb->pdata[13] << 16) |
+ ((uint64_t)pccb->pdata[14] << 8) |
+ ((uint64_t)pccb->pdata[15]);
+
+ return 0;
+}
+
+
+/*
+ * Some setup (fill-in) routines
+ */
+static void scsi_setup_test_unit_ready(ccb *pccb)
+{
+ pccb->cmd[0] = SCSI_TST_U_RDY;
+ pccb->cmd[1] = pccb->lun << 5;
+ pccb->cmd[2] = 0;
+ pccb->cmd[3] = 0;
+ pccb->cmd[4] = 0;
+ pccb->cmd[5] = 0;
+ pccb->cmdlen = 6;
+ pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+}
+
+/**
+ * scsi_init_dev_desc_priv - initialize only SCSI specific blk_desc properties
+ *
+ * @dev_desc: Block device description pointer
+ */
+static void scsi_init_dev_desc_priv(struct blk_desc *dev_desc)
+{
+ dev_desc->target = 0xff;
+ dev_desc->lun = 0xff;
+ dev_desc->log2blksz =
+ LOG2_INVALID(typeof(dev_desc->log2blksz));
+ dev_desc->type = DEV_TYPE_UNKNOWN;
+ dev_desc->vendor[0] = 0;
+ dev_desc->product[0] = 0;
+ dev_desc->revision[0] = 0;
+ dev_desc->removable = false;
+#ifndef CONFIG_BLK
+ dev_desc->block_read = scsi_read;
+ dev_desc->block_write = scsi_write;
+#endif
+}
+
+#if !defined(CONFIG_DM_SCSI)
+/**
+ * scsi_init_dev_desc - initialize all SCSI specific blk_desc properties
+ *
+ * @dev_desc: Block device description pointer
+ * @devnum: Device number
+ */
+static void scsi_init_dev_desc(struct blk_desc *dev_desc, int devnum)
+{
+ dev_desc->lba = 0;
+ dev_desc->blksz = 0;
+ dev_desc->if_type = IF_TYPE_SCSI;
+ dev_desc->devnum = devnum;
+ dev_desc->part_type = PART_TYPE_UNKNOWN;
+
+ scsi_init_dev_desc_priv(dev_desc);
+}
+#endif
+
+/**
+ * scsi_detect_dev - Detect scsi device
+ *
+ * @target: target id
+ * @lun: target lun
+ * @dev_desc: block device description
+ *
+ * The scsi_detect_dev detects and fills a dev_desc structure when the device is
+ * detected.
+ *
+ * Return: 0 on success, error value otherwise
+ */
+static int scsi_detect_dev(int target, int lun, struct blk_desc *dev_desc)
+{
+ unsigned char perq, modi;
+ lbaint_t capacity;
+ unsigned long blksz;
+ ccb *pccb = (ccb *)&tempccb;
+
+ pccb->target = target;
+ pccb->lun = lun;
+ pccb->pdata = (unsigned char *)&tempbuff;
+ pccb->datalen = 512;
+ scsi_setup_inquiry(pccb);
+ if (scsi_exec(pccb) != true) {
+ if (pccb->contr_stat == SCSI_SEL_TIME_OUT) {
+ /*
+ * selection timeout => assuming no
+ * device present
+ */
+ debug("Selection timeout ID %d\n",
+ pccb->target);
+ return -ETIMEDOUT;
+ }
+ scsi_print_error(pccb);
+ return -ENODEV;
+ }
+ perq = tempbuff[0];
+ modi = tempbuff[1];
+ if ((perq & 0x1f) == 0x1f)
+ return -ENODEV; /* skip unknown devices */
+ if ((modi & 0x80) == 0x80) /* drive is removable */
+ dev_desc->removable = true;
+ /* get info for this device */
+ scsi_ident_cpy((unsigned char *)dev_desc->vendor,
+ &tempbuff[8], 8);
+ scsi_ident_cpy((unsigned char *)dev_desc->product,
+ &tempbuff[16], 16);
+ scsi_ident_cpy((unsigned char *)dev_desc->revision,
+ &tempbuff[32], 4);
+ dev_desc->target = pccb->target;
+ dev_desc->lun = pccb->lun;
+
+ pccb->datalen = 0;
+ scsi_setup_test_unit_ready(pccb);
+ if (scsi_exec(pccb) != true) {
+ if (dev_desc->removable) {
+ dev_desc->type = perq;
+ goto removable;
+ }
+ scsi_print_error(pccb);
+ return -EINVAL;
+ }
+ if (scsi_read_capacity(pccb, &capacity, &blksz)) {
+ scsi_print_error(pccb);
+ return -EINVAL;
+ }
+ dev_desc->lba = capacity;
+ dev_desc->blksz = blksz;
+ dev_desc->log2blksz = LOG2(dev_desc->blksz);
+ dev_desc->type = perq;
+removable:
+ return 0;
+}
+
+/*
+ * (re)-scan the scsi bus and reports scsi device info
+ * to the user if mode = 1
+ */
+#if defined(CONFIG_DM_SCSI)
+static int do_scsi_scan_one(struct udevice *dev, int id, int lun, int mode)
+{
+ int ret;
+ struct udevice *bdev;
+ struct blk_desc bd;
+ struct blk_desc *bdesc;
+ char str[10];
+
+ /*
+ * detect the scsi driver to get information about its geometry (block
+ * size, number of blocks) and other parameters (ids, type, ...)
+ */
+ scsi_init_dev_desc_priv(&bd);
+ if (scsi_detect_dev(id, lun, &bd))
+ return -ENODEV;
+
+ /*
+ * Create only one block device and do detection
+ * to make sure that there won't be a lot of
+ * block devices created
+ */
+ snprintf(str, sizeof(str), "id%dlun%d", id, lun);
+ ret = blk_create_devicef(dev, "scsi_blk", str, IF_TYPE_SCSI, -1,
+ bd.blksz, bd.blksz * bd.lba, &bdev);
+ if (ret) {
+ debug("Can't create device\n");
+ return ret;
+ }
+
+ bdesc = dev_get_uclass_platdata(bdev);
+ bdesc->target = id;
+ bdesc->lun = lun;
+ bdesc->removable = bd.removable;
+ bdesc->type = bd.type;
+ memcpy(&bdesc->vendor, &bd.vendor, sizeof(bd.vendor));
+ memcpy(&bdesc->product, &bd.product, sizeof(bd.product));
+ memcpy(&bdesc->revision, &bd.revision, sizeof(bd.revision));
+ part_init(bdesc);
+
+ if (mode == 1) {
+ printf(" Device %d: ", 0);
+ dev_print(bdesc);
+ }
+ return 0;
+}
+
+int scsi_scan(int mode)
+{
+ unsigned char i, lun;
+ struct uclass *uc;
+ struct udevice *dev; /* SCSI controller */
+ int ret;
+
+ if (mode == 1)
+ printf("scanning bus for devices...\n");
+
+ blk_unbind_all(IF_TYPE_SCSI);
+
+ ret = uclass_get(UCLASS_SCSI, &uc);
+ if (ret)
+ return ret;
+
+ uclass_foreach_dev(dev, uc) {
+ struct scsi_platdata *plat; /* scsi controller platdata */
+
+ /* probe SCSI controller driver */
+ ret = device_probe(dev);
+ if (ret)
+ return ret;
+
+ /* Get controller platdata */
+ plat = dev_get_platdata(dev);
+
+ for (i = 0; i < plat->max_id; i++)
+ for (lun = 0; lun < plat->max_lun; lun++)
+ do_scsi_scan_one(dev, i, lun, mode);
+ }
+
+ return 0;
+}
+#else
+int scsi_scan(int mode)
+{
+ unsigned char i, lun;
+ int ret;
+
+ if (mode == 1)
+ printf("scanning bus for devices...\n");
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_DEVICE; i++)
+ scsi_init_dev_desc(&scsi_dev_desc[i], i);
+
+ scsi_max_devs = 0;
+ for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) {
+ for (lun = 0; lun < CONFIG_SYS_SCSI_MAX_LUN; lun++) {
+ ret = scsi_detect_dev(i, lun,
+ &scsi_dev_desc[scsi_max_devs]);
+ if (ret)
+ continue;
+ part_init(&scsi_dev_desc[scsi_max_devs]);
+
+ if (mode == 1) {
+ printf(" Device %d: ", 0);
+ dev_print(&scsi_dev_desc[scsi_max_devs]);
+ } /* if mode */
+ scsi_max_devs++;
+ } /* next LUN */
+ }
+ if (scsi_max_devs > 0)
+ scsi_curr_dev = 0;
+ else
+ scsi_curr_dev = -1;
+
+ printf("Found %d device(s).\n", scsi_max_devs);
+#ifndef CONFIG_SPL_BUILD
+ setenv_ulong("scsidevs", scsi_max_devs);
+#endif
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_BLK
+static const struct blk_ops scsi_blk_ops = {
+ .read = scsi_read,
+ .write = scsi_write,
+};
+
+U_BOOT_DRIVER(scsi_blk) = {
+ .name = "scsi_blk",
+ .id = UCLASS_BLK,
+ .ops = &scsi_blk_ops,
+};
+#else
+U_BOOT_LEGACY_BLK(scsi) = {
+ .if_typename = "scsi",
+ .if_type = IF_TYPE_SCSI,
+ .max_devs = CONFIG_SYS_SCSI_MAX_DEVICE,
+ .desc = scsi_dev_desc,
+};
+#endif
projects / u-boot / commitdiff