* (C) Copyright 2003-2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Based on PRO Motion board config file by Andy Joseph, andy@promessdev.com
+ * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
*
* See file CREDITS for list of people who contributed to this
* project.
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_ETHADDR 00:50:C2:40:10:00
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=motionpro\0" \
- "netmask=255.255.0.0\0" \
- "ipaddr=192.168.160.22\0" \
- "serverip=192.168.1.1\0" \
- "gatewayip=192.168.1.1\0" \
+ "netmask=255.255.255.0\0" \
+ "ipaddr=192.168.1.106\0" \
+ "serverip=192.168.1.100\0" \
+ "gatewayip=192.168.1.100\0" \
"console=ttyPSC0,115200\0" \
"u-boot_addr=400000\0" \
"kernel_addr=400000\0" \
"fdt_addr=700000\0" \
"ramdisk_addr=800000\0" \
"multi_image_addr=800000\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "u-boot=motionpro/u-boot.bin\0" \
- "bootfile=motionpro/uImage\0" \
- "fdt_file=motionpro/motionpro.dtb\0" \
- "ramdisk_file=motionpro/uRamdisk\0" \
+ "rootpath=/opt/eldk-4.2/ppc_6xx\0" \
+ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
+ "bootfile=/tftpboot/motionpro/uImage\0" \
+ "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
+ "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
"multi_image_file=kernel+initrd+dtb.img\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
"update=prot off fff00000 +${filesize};" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
- "fat_args=setenv bootargs rw\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "fat_args=setenv bootargs root=/dev/sda rw\0" \
+ "mtdids=nor0=ff000000.flash\0" \
+ "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \
+ "128k(env),128k(redund_env)," \
+ "128k(dtb),128k(user_data)\0" \
+ "addcons=setenv bootargs ${bootargs} console=${console}\0" \
+ "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off panic=1 " \
"console=${console}\0" \
"net_nfs=tftp ${kernel_addr} ${bootfile}; " \
- "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip; " \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "run nfsargs addip addmtd; " \
"bootm ${kernel_addr} - ${fdt_addr}\0" \
"net_self=tftp ${kernel_addr} ${bootfile}; " \
"tftp ${fdt_addr} ${fdt_file}; " \
"tftp ${ramdisk_addr} ${ramdisk_file}; " \
- "run ramargs addip; " \
+ "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \
+ "run ramargs addip addcons addmtd; " \
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
- "fat_multi=run fat_args addip; fatload ide 0:1 " \
+ "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \
"${multi_image_addr} ${multi_image_file}; " \
"bootm ${multi_image_addr}\0" \
""
-#define CONFIG_BOOTCOMMAND "run net_nfs"
+#define CONFIG_BOOTCOMMAND "run fat_multi"
/*
* do board-specific init
#define CONFIG_SYS_RAMBOOT 1
#endif
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=motionpro-0"
#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
- "13m(fs),2m(kernel),256k(uboot)," \
+ "13m(fs),2m(kernel),384k(uboot)," \
"128k(env),128k(redund_env)," \
"128k(dtb),-(user_data)"