]> git.sur5r.net Git - u-boot/commitdiff
da850/omap-l138: Add support for NAND SPL
authorLad, Prabhakar <prabhakar.lad@ti.com>
Sun, 24 Jun 2012 21:35:22 +0000 (21:35 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Sat, 1 Sep 2012 12:58:09 +0000 (14:58 +0200)
This patch adds configuration required for NAND SP
on DA850/OMAP-L138.

Tested-by: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
include/configs/da850evm.h

index e4cc3be998fc914d61f94a61cdf7c2c8fb18ffe8..7c83ecdaf793fc628ea9a88d10d6b39242a4a379 100644 (file)
 #define CONFIG_SYS_ALE_MASK            0x8
 #undef CONFIG_SYS_NAND_HW_ECC
 #define CONFIG_SYS_MAX_NAND_DEVICE     1 /* Max number of NAND devices */
+#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_SYS_NAND_PAGE_SIZE      (2 << 10)
+#define CONFIG_SYS_NAND_BLOCK_SIZE     (128 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x28000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    0x60000
+#define CONFIG_SYS_NAND_U_BOOT_DST     0xc1080000
+#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_NAND_U_BOOT_DST
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP        (CONFIG_SYS_NAND_U_BOOT_DST - \
+                                       CONFIG_SYS_NAND_U_BOOT_SIZE - \
+                                       CONFIG_SYS_MALLOC_LEN -       \
+                                       GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_NAND_ECCPOS         {                               \
+                               24, 25, 26, 27, 28, \
+                               29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
+                               39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
+                               49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
+                               59, 60, 61, 62, 63 }
+#define CONFIG_SYS_NAND_PAGE_COUNT     64
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0
+#define CONFIG_SYS_NAND_ECCSIZE                512
+#define CONFIG_SYS_NAND_ECCBYTES       10
+#define CONFIG_SYS_NAND_OOBSIZE                64
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_SIMPLE
+#define CONFIG_SPL_NAND_LOAD
 #endif
 
 /*