This is not really a config. Rename it to avoid confusion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
#define CONFIG_DEFAULT_FDT_FILE "imx6q-dms-ba16.dtb"
#define CONFIG_MXC_UART_BASE UART4_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc3"
+#define CONSOLE_DEV "ttymxc3"
#define CONFIG_EXTRA_BOOTARGS "panic=10"
#define CONFIG_BOOT_DIR ""
"fdt_addr=0x18000000\0" \
"boot_fdt=yes\0" \
"ip_dyn=yes\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"sddev=0\0" \
"rescue_sys_length=f10000\0" \
"panel=lb07wv8\0" \
"splashpos=m,m\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
#define CONFIG_BOARDNAME "aristainetos"
#define CONFIG_MXC_UART_BASE UART5_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc4"
+#define CONSOLE_DEV "ttymxc4"
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_PHY_MICREL_KSZ9031
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_PHY_MICREL_KSZ9031
/* Command definition */
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define CONFIG_SYS_MMC_ENV_DEV 0
"fdt_addr_r=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
"dfu_alt_info_spl=spl raw 0x400\0" \
"dfu_alt_info_img=u-boot raw 0x10000\0" \
"board="__stringify(CONFIG_BOARD_NAME)"\0" \
"cma_size="__stringify(EL6Q_CMA_SIZE)"\0" \
"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"fdtfile=undefined\0" \
"fdt_high=0xffffffff\0" \
"fdt_addr_r=0x18000000\0" \
#define __RIOTBOARD_CONFIG_H
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define CONFIG_MMCROOT "/dev/mmcblk1p2"
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#endif
#define CONFIG_MXC_UART_BASE UART3_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc2"
+#define CONSOLE_DEV "ttymxc2"
#define CONFIG_SUPPORT_EMMC_BOOT
"fdt_addr=0x18000000\0" \
"boot_fdt=yes\0" \
"ip_dyn=yes\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"sddev=0\0" \
/* Command definition */
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc0"
+#define CONSOLE_DEV "ttymxc0"
#define CONFIG_SYS_FSL_USDHC_NUM 1
#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
"initrd_high=0xffffffff\0" \
"fdt_high=0xffffffff\0" \
"ip_dyn=yes\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"bootm_size=0x10000000\0" \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"update_sd_firmware=" \
#define CONFIG_MACH_TYPE 3529
#define CONFIG_MXC_UART_BASE UART4_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc3"
+#define CONSOLE_DEV "ttymxc3"
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
/* USB Configs */
"fdt_addr=0x18000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"dfuspi=dfu 0 sf 0:0:10000000:0\0" \
"dfu_alt_info_spl=spl raw 0x400\0" \
"dfu_alt_info_img=u-boot raw 0x10000\0" \
#define CONFIG_MACH_TYPE 3980
#define CONFIG_MXC_UART_BASE UART1_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc0"
+#define CONSOLE_DEV "ttymxc0"
#define CONFIG_MMCROOT "/dev/mmcblk1p2"
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
#undef CONFIG_BOOTARGS
-#if !defined(CONFIG_CONSOLE_DEV)
-#define CONFIG_CONSOLE_DEV "ttyPSC1"
+#if !defined(CONSOLE_DEV)
+#define CONSOLE_DEV "ttyPSC1"
#endif
/*
"addmem=setenv bootargs ${bootargs} ${memlimit}\0" \
"addmisc=sete bootargs ${bootargs} ${miscargs}\0" \
"addtty=sete bootargs ${bootargs} console=" \
- CONFIG_CONSOLE_DEV ",${baudrate}\0" \
+ CONSOLE_DEV ",${baudrate}\0" \
"bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0" \
"kernel_addr_r=600000\0" \
"initrd_high=0x03e00000\0" \
/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
"uboot=u-boot.imx\0" \
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
"fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \
- "console=" CONFIG_CONSOLE_DEV "\0" \
+ "console=" CONSOLE_DEV "\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
#define CONFIG_PHY_KSZ9031
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#endif /* __CONFIG_TQMA6_MBA6_H */
/* UART */
#define CONFIG_MXC_UART_BASE UART4_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc3"
+#define CONSOLE_DEV "ttymxc3"
#define CONFIG_MISC_INIT_R
#define __EL_ZC5202_H
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
#define CONFIG_DEFAULT_FDT_FILE "imx6q-zc5202.dtb"
#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONFIG_CONSOLE_DEV "ttymxc1"
+#define CONSOLE_DEV "ttymxc1"
#define CONFIG_MMCROOT "/dev/mmcblk0p1"
#define CONFIG_DEFAULT_FDT_FILE "imx6q-zc5601.dtb"
CONFIG_COMMON_ENV_UBI
CONFIG_COMPACT_FLASH
CONFIG_COMPAT
-CONFIG_CONSOLE_DEV
CONFIG_CONSOLE_EXTRA_INFO
CONFIG_CONSOLE_INFO_QUIET
CONFIG_CONSOLE_SCROLL_LINES