]> git.sur5r.net Git - u-boot/commitdiff
ARM: rpi_b: enable SD controller, add related env/cmds
authorStephen Warren <swarren@wwwdotorg.org>
Tue, 29 Jan 2013 16:37:42 +0000 (16:37 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Wed, 20 Mar 2013 14:32:16 +0000 (15:32 +0100)
Enable the SD controller driver for the Raspberry Pi. Enable a number
of useful MMC, partition, and filesystem-related commands. Set up the
environment to provide standard locations for loading a kernel, DTB,
etc. Provide a boot command that loads and executes boot.scr.uimg from
the SD card; this is written considering future extensibilty to USB
storage.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
arch/arm/include/asm/arch-bcm2835/mbox.h
board/raspberrypi/rpi_b/rpi_b.c
include/configs/rpi_b.h

index 4752091b95908539717406df0fda62f2ecb53889..b07c4a02bbf1e786589ba649e01dd2fb241aa07b 100644 (file)
@@ -144,6 +144,32 @@ struct bcm2835_mbox_tag_get_arm_mem {
        } body;
 };
 
+#define BCM2835_MBOX_TAG_GET_CLOCK_RATE        0x00030002
+
+#define BCM2835_MBOX_CLOCK_ID_EMMC     1
+#define BCM2835_MBOX_CLOCK_ID_UART     2
+#define BCM2835_MBOX_CLOCK_ID_ARM      3
+#define BCM2835_MBOX_CLOCK_ID_CORE     4
+#define BCM2835_MBOX_CLOCK_ID_V3D      5
+#define BCM2835_MBOX_CLOCK_ID_H264     6
+#define BCM2835_MBOX_CLOCK_ID_ISP      7
+#define BCM2835_MBOX_CLOCK_ID_SDRAM    8
+#define BCM2835_MBOX_CLOCK_ID_PIXEL    9
+#define BCM2835_MBOX_CLOCK_ID_PWM      10
+
+struct bcm2835_mbox_tag_get_clock_rate {
+       struct bcm2835_mbox_tag_hdr tag_hdr;
+       union {
+               struct {
+                       u32 clock_id;
+               } req;
+               struct {
+                       u32 clock_id;
+                       u32 rate_hz;
+               } resp;
+       } body;
+};
+
 #define BCM2835_MBOX_TAG_ALLOCATE_BUFFER       0x00040001
 
 struct bcm2835_mbox_tag_allocate_buffer {
index 3c654a1ac1ef6644b680a6d80b21876603fe77c1..6b3e095ba89bcb96ae5c7b8e3708ca7b92787bd2 100644 (file)
@@ -16,6 +16,7 @@
 
 #include <common.h>
 #include <asm/arch/mbox.h>
+#include <asm/arch/sdhci.h>
 #include <asm/global_data.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -26,6 +27,12 @@ struct msg_get_arm_mem {
        u32 end_tag;
 };
 
+struct msg_get_clock_rate {
+       struct bcm2835_mbox_hdr hdr;
+       struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
+       u32 end_tag;
+};
+
 int dram_init(void)
 {
        ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16);
@@ -51,3 +58,22 @@ int board_init(void)
 
        return 0;
 }
+
+int board_mmc_init(void)
+{
+       ALLOC_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1, 16);
+       int ret;
+
+       BCM2835_MBOX_INIT_HDR(msg_clk);
+       BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE);
+       msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC;
+
+       ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr);
+       if (ret) {
+               printf("bcm2835: Could not query eMMC clock rate\n");
+               return -1;
+       }
+
+       return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
+                                 msg_clk->get_clock_rate.body.resp.rate_hz);
+}
index e485a061a61ea4a76daa1b892ba2ba751c1f714d..3d55d36c6ec530cbe8d9b2b3c1250f5b01cb56db 100644 (file)
@@ -51,6 +51,7 @@
 #define CONFIG_SYS_MALLOC_LEN          SZ_4M
 #define CONFIG_SYS_MEMTEST_START       0x00100000
 #define CONFIG_SYS_MEMTEST_END         0x00200000
+#define CONFIG_LOADADDR                        0x00200000
 
 /* Flash */
 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_VIDEO_BCM2835
 #define CONFIG_SYS_WHITE_ON_BLACK
 
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MMC_SDHCI_IO_ACCESSORS
+#define CONFIG_BCM2835_SDHCI
+
 /* Console UART */
 #define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK             3000000
 /* Environment */
 #define CONFIG_ENV_SIZE                        SZ_16K
 #define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_SYS_LOAD_ADDR           0x1000000
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_EXTRA_ENV_SETTINGS      "stdin=serial\0" \
-                                       "stderr=serial,lcd\0" \
-                                       "stdout=serial,lcd\0"
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it low in memory to avoid conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "stdin=serial\0" \
+       "stderr=serial,lcd\0" \
+       "stdout=serial,lcd\0" \
+       "scriptaddr=0x00000000\0" \
+       "kernel_addr_r=0x01000000\0" \
+       "fdt_addr_r=0x02000000\0" \
+       "ramdisk_addr_r=0x02100000\0" \
+       "boot_targets=mmc0\0" \
+       \
+       "script_boot=" \
+               "if fatload ${devtype} ${devnum}:1 " \
+                                       "${scriptaddr} boot.scr.uimg; then " \
+                       "source ${scriptaddr}; " \
+               "fi;\0" \
+       \
+       "mmc_boot=" \
+               "setenv devtype mmc; " \
+               "if mmc dev ${devnum}; then " \
+                       "run script_boot; " \
+               "fi\0" \
+       \
+       "bootcmd_mmc0=setenv devnum 0; run mmc_boot\0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "for target in ${boot_targets}; do run bootcmd_${target}; done"
+
+#define CONFIG_BOOTDELAY               2
 
 /* Shell */
 #define CONFIG_SYS_HUSH_PARSER
 #include <config_cmd_default.h>
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_GPIO
+#define CONFIG_CMD_MMC
+#define CONFIG_DOS_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+#define CONFIG_CMD_FS_GENERIC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT
 /* Some things don't make sense on this HW or yet */
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_NET