#
# Console Drivers
#
-COBJS-y += atmel_usart.o
COBJS-y += i8042.o
COBJS-y += keyboard.o
-COBJS-y += ns16550.o
COBJS-y += pc_keyb.o
COBJS-y += ps2ser.o
COBJS-y += ps2mult.o
-COBJS-y += s3c4510b_uart.o
-COBJS-y += serial.o
-COBJS-y += serial_max3100.o
-COBJS-y += serial_xuartlite.o
-COBJS-y += usbtty.o
#
# USB Drivers
+++ /dev/null
-/*
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <common.h>
-
-#ifdef CONFIG_ATMEL_USART
-#include <asm/io.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/memory-map.h>
-
-#if defined(CONFIG_USART0)
-# define USART_ID 0
-# define USART_BASE USART0_BASE
-#elif defined(CONFIG_USART1)
-# define USART_ID 1
-# define USART_BASE USART1_BASE
-#elif defined(CONFIG_USART2)
-# define USART_ID 2
-# define USART_BASE USART2_BASE
-#elif defined(CONFIG_USART3)
-# define USART_ID 3
-# define USART_BASE USART3_BASE
-#endif
-
-#include "atmel_usart.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void serial_setbrg(void)
-{
- unsigned long divisor;
- unsigned long usart_hz;
-
- /*
- * Master Clock
- * Baud Rate = --------------
- * 16 * CD
- */
- usart_hz = get_usart_clk_rate(USART_ID);
- divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
- usart3_writel(BRGR, USART3_BF(CD, divisor));
-}
-
-int serial_init(void)
-{
- usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
-
- serial_setbrg();
-
- usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN));
- usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
- | USART3_BF(USCLKS, USART3_USCLKS_MCK)
- | USART3_BF(CHRL, USART3_CHRL_8)
- | USART3_BF(PAR, USART3_PAR_NONE)
- | USART3_BF(NBSTOP, USART3_NBSTOP_1)));
-
- return 0;
-}
-
-void serial_putc(char c)
-{
- if (c == '\n')
- serial_putc('\r');
-
- while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ;
- usart3_writel(THR, c);
-}
-
-void serial_puts(const char *s)
-{
- while (*s)
- serial_putc(*s++);
-}
-
-int serial_getc(void)
-{
- while (!(usart3_readl(CSR) & USART3_BIT(RXRDY))) ;
- return usart3_readl(RHR);
-}
-
-int serial_tstc(void)
-{
- return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
-}
-
-#endif /* CONFIG_ATMEL_USART */
+++ /dev/null
-/*
- * Register definitions for the Atmel USART3 module.
- *
- * Copyright (C) 2005-2006 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __DRIVERS_ATMEL_USART_H__
-#define __DRIVERS_ATMEL_USART_H__
-
-/* USART3 register offsets */
-#define USART3_CR 0x0000
-#define USART3_MR 0x0004
-#define USART3_IER 0x0008
-#define USART3_IDR 0x000c
-#define USART3_IMR 0x0010
-#define USART3_CSR 0x0014
-#define USART3_RHR 0x0018
-#define USART3_THR 0x001c
-#define USART3_BRGR 0x0020
-#define USART3_RTOR 0x0024
-#define USART3_TTGR 0x0028
-#define USART3_FIDI 0x0040
-#define USART3_NER 0x0044
-#define USART3_XXR 0x0048
-#define USART3_IFR 0x004c
-#define USART3_RPR 0x0100
-#define USART3_RCR 0x0104
-#define USART3_TPR 0x0108
-#define USART3_TCR 0x010c
-#define USART3_RNPR 0x0110
-#define USART3_RNCR 0x0114
-#define USART3_TNPR 0x0118
-#define USART3_TNCR 0x011c
-#define USART3_PTCR 0x0120
-#define USART3_PTSR 0x0124
-
-/* Bitfields in CR */
-#define USART3_RSTRX_OFFSET 2
-#define USART3_RSTRX_SIZE 1
-#define USART3_RSTTX_OFFSET 3
-#define USART3_RSTTX_SIZE 1
-#define USART3_RXEN_OFFSET 4
-#define USART3_RXEN_SIZE 1
-#define USART3_RXDIS_OFFSET 5
-#define USART3_RXDIS_SIZE 1
-#define USART3_TXEN_OFFSET 6
-#define USART3_TXEN_SIZE 1
-#define USART3_TXDIS_OFFSET 7
-#define USART3_TXDIS_SIZE 1
-#define USART3_RSTSTA_OFFSET 8
-#define USART3_RSTSTA_SIZE 1
-#define USART3_STTBRK_OFFSET 9
-#define USART3_STTBRK_SIZE 1
-#define USART3_STPBRK_OFFSET 10
-#define USART3_STPBRK_SIZE 1
-#define USART3_STTTO_OFFSET 11
-#define USART3_STTTO_SIZE 1
-#define USART3_SENDA_OFFSET 12
-#define USART3_SENDA_SIZE 1
-#define USART3_RSTIT_OFFSET 13
-#define USART3_RSTIT_SIZE 1
-#define USART3_RSTNACK_OFFSET 14
-#define USART3_RSTNACK_SIZE 1
-#define USART3_RETTO_OFFSET 15
-#define USART3_RETTO_SIZE 1
-#define USART3_DTREN_OFFSET 16
-#define USART3_DTREN_SIZE 1
-#define USART3_DTRDIS_OFFSET 17
-#define USART3_DTRDIS_SIZE 1
-#define USART3_RTSEN_OFFSET 18
-#define USART3_RTSEN_SIZE 1
-#define USART3_RTSDIS_OFFSET 19
-#define USART3_RTSDIS_SIZE 1
-#define USART3_COMM_TX_OFFSET 30
-#define USART3_COMM_TX_SIZE 1
-#define USART3_COMM_RX_OFFSET 31
-#define USART3_COMM_RX_SIZE 1
-
-/* Bitfields in MR */
-#define USART3_USART_MODE_OFFSET 0
-#define USART3_USART_MODE_SIZE 4
-#define USART3_USCLKS_OFFSET 4
-#define USART3_USCLKS_SIZE 2
-#define USART3_CHRL_OFFSET 6
-#define USART3_CHRL_SIZE 2
-#define USART3_SYNC_OFFSET 8
-#define USART3_SYNC_SIZE 1
-#define USART3_PAR_OFFSET 9
-#define USART3_PAR_SIZE 3
-#define USART3_NBSTOP_OFFSET 12
-#define USART3_NBSTOP_SIZE 2
-#define USART3_CHMODE_OFFSET 14
-#define USART3_CHMODE_SIZE 2
-#define USART3_MSBF_OFFSET 16
-#define USART3_MSBF_SIZE 1
-#define USART3_MODE9_OFFSET 17
-#define USART3_MODE9_SIZE 1
-#define USART3_CLKO_OFFSET 18
-#define USART3_CLKO_SIZE 1
-#define USART3_OVER_OFFSET 19
-#define USART3_OVER_SIZE 1
-#define USART3_INACK_OFFSET 20
-#define USART3_INACK_SIZE 1
-#define USART3_DSNACK_OFFSET 21
-#define USART3_DSNACK_SIZE 1
-#define USART3_MAX_ITERATION_OFFSET 24
-#define USART3_MAX_ITERATION_SIZE 3
-#define USART3_FILTER_OFFSET 28
-#define USART3_FILTER_SIZE 1
-
-/* Bitfields in CSR */
-#define USART3_RXRDY_OFFSET 0
-#define USART3_RXRDY_SIZE 1
-#define USART3_TXRDY_OFFSET 1
-#define USART3_TXRDY_SIZE 1
-#define USART3_RXBRK_OFFSET 2
-#define USART3_RXBRK_SIZE 1
-#define USART3_ENDRX_OFFSET 3
-#define USART3_ENDRX_SIZE 1
-#define USART3_ENDTX_OFFSET 4
-#define USART3_ENDTX_SIZE 1
-#define USART3_OVRE_OFFSET 5
-#define USART3_OVRE_SIZE 1
-#define USART3_FRAME_OFFSET 6
-#define USART3_FRAME_SIZE 1
-#define USART3_PARE_OFFSET 7
-#define USART3_PARE_SIZE 1
-#define USART3_TIMEOUT_OFFSET 8
-#define USART3_TIMEOUT_SIZE 1
-#define USART3_TXEMPTY_OFFSET 9
-#define USART3_TXEMPTY_SIZE 1
-#define USART3_ITERATION_OFFSET 10
-#define USART3_ITERATION_SIZE 1
-#define USART3_TXBUFE_OFFSET 11
-#define USART3_TXBUFE_SIZE 1
-#define USART3_RXBUFF_OFFSET 12
-#define USART3_RXBUFF_SIZE 1
-#define USART3_NACK_OFFSET 13
-#define USART3_NACK_SIZE 1
-#define USART3_RIIC_OFFSET 16
-#define USART3_RIIC_SIZE 1
-#define USART3_DSRIC_OFFSET 17
-#define USART3_DSRIC_SIZE 1
-#define USART3_DCDIC_OFFSET 18
-#define USART3_DCDIC_SIZE 1
-#define USART3_CTSIC_OFFSET 19
-#define USART3_CTSIC_SIZE 1
-#define USART3_RI_OFFSET 20
-#define USART3_RI_SIZE 1
-#define USART3_DSR_OFFSET 21
-#define USART3_DSR_SIZE 1
-#define USART3_DCD_OFFSET 22
-#define USART3_DCD_SIZE 1
-#define USART3_CTS_OFFSET 23
-#define USART3_CTS_SIZE 1
-
-/* Bitfields in RHR */
-#define USART3_RXCHR_OFFSET 0
-#define USART3_RXCHR_SIZE 9
-
-/* Bitfields in THR */
-#define USART3_TXCHR_OFFSET 0
-#define USART3_TXCHR_SIZE 9
-
-/* Bitfields in BRGR */
-#define USART3_CD_OFFSET 0
-#define USART3_CD_SIZE 16
-
-/* Bitfields in RTOR */
-#define USART3_TO_OFFSET 0
-#define USART3_TO_SIZE 16
-
-/* Bitfields in TTGR */
-#define USART3_TG_OFFSET 0
-#define USART3_TG_SIZE 8
-
-/* Bitfields in FIDI */
-#define USART3_FI_DI_RATIO_OFFSET 0
-#define USART3_FI_DI_RATIO_SIZE 11
-
-/* Bitfields in NER */
-#define USART3_NB_ERRORS_OFFSET 0
-#define USART3_NB_ERRORS_SIZE 8
-
-/* Bitfields in XXR */
-#define USART3_XOFF_OFFSET 0
-#define USART3_XOFF_SIZE 8
-#define USART3_XON_OFFSET 8
-#define USART3_XON_SIZE 8
-
-/* Bitfields in IFR */
-#define USART3_IRDA_FILTER_OFFSET 0
-#define USART3_IRDA_FILTER_SIZE 8
-
-/* Bitfields in RCR */
-#define USART3_RXCTR_OFFSET 0
-#define USART3_RXCTR_SIZE 16
-
-/* Bitfields in TCR */
-#define USART3_TXCTR_OFFSET 0
-#define USART3_TXCTR_SIZE 16
-
-/* Bitfields in RNCR */
-#define USART3_RXNCR_OFFSET 0
-#define USART3_RXNCR_SIZE 16
-
-/* Bitfields in TNCR */
-#define USART3_TXNCR_OFFSET 0
-#define USART3_TXNCR_SIZE 16
-
-/* Bitfields in PTCR */
-#define USART3_RXTEN_OFFSET 0
-#define USART3_RXTEN_SIZE 1
-#define USART3_RXTDIS_OFFSET 1
-#define USART3_RXTDIS_SIZE 1
-#define USART3_TXTEN_OFFSET 8
-#define USART3_TXTEN_SIZE 1
-#define USART3_TXTDIS_OFFSET 9
-#define USART3_TXTDIS_SIZE 1
-
-/* Constants for USART_MODE */
-#define USART3_USART_MODE_NORMAL 0
-#define USART3_USART_MODE_RS485 1
-#define USART3_USART_MODE_HARDWARE 2
-#define USART3_USART_MODE_MODEM 3
-#define USART3_USART_MODE_ISO7816_T0 4
-#define USART3_USART_MODE_ISO7816_T1 6
-#define USART3_USART_MODE_IRDA 8
-
-/* Constants for USCLKS */
-#define USART3_USCLKS_MCK 0
-#define USART3_USCLKS_MCK_DIV 1
-#define USART3_USCLKS_SCK 3
-
-/* Constants for CHRL */
-#define USART3_CHRL_5 0
-#define USART3_CHRL_6 1
-#define USART3_CHRL_7 2
-#define USART3_CHRL_8 3
-
-/* Constants for PAR */
-#define USART3_PAR_EVEN 0
-#define USART3_PAR_ODD 1
-#define USART3_PAR_SPACE 2
-#define USART3_PAR_MARK 3
-#define USART3_PAR_NONE 4
-#define USART3_PAR_MULTI 6
-
-/* Constants for NBSTOP */
-#define USART3_NBSTOP_1 0
-#define USART3_NBSTOP_1_5 1
-#define USART3_NBSTOP_2 2
-
-/* Constants for CHMODE */
-#define USART3_CHMODE_NORMAL 0
-#define USART3_CHMODE_ECHO 1
-#define USART3_CHMODE_LOCAL_LOOP 2
-#define USART3_CHMODE_REMOTE_LOOP 3
-
-/* Constants for MSBF */
-#define USART3_MSBF_LSBF 0
-#define USART3_MSBF_MSBF 1
-
-/* Constants for OVER */
-#define USART3_OVER_X16 0
-#define USART3_OVER_X8 1
-
-/* Constants for CD */
-#define USART3_CD_DISABLE 0
-#define USART3_CD_BYPASS 1
-
-/* Constants for TO */
-#define USART3_TO_DISABLE 0
-
-/* Constants for TG */
-#define USART3_TG_DISABLE 0
-
-/* Constants for FI_DI_RATIO */
-#define USART3_FI_DI_RATIO_DISABLE 0
-
-/* Bit manipulation macros */
-#define USART3_BIT(name) \
- (1 << USART3_##name##_OFFSET)
-#define USART3_BF(name,value) \
- (((value) & ((1 << USART3_##name##_SIZE) - 1)) \
- << USART3_##name##_OFFSET)
-#define USART3_BFEXT(name,value) \
- (((value) >> USART3_##name##_OFFSET) \
- & ((1 << USART3_##name##_SIZE) - 1))
-#define USART3_BFINS(name,value,old) \
- (((old) & ~(((1 << USART3_##name##_SIZE) - 1) \
- << USART3_##name##_OFFSET)) \
- | USART3_BF(name,value))
-
-/* Register access macros */
-#define usart3_readl(reg) \
- readl((void *)USART_BASE + USART3_##reg)
-#define usart3_writel(reg,value) \
- writel((value), (void *)USART_BASE + USART3_##reg)
-
-#endif /* __DRIVERS_ATMEL_USART_H__ */
+++ /dev/null
-/*
- * COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
- */
-
-#include <config.h>
-
-#ifdef CFG_NS16550
-
-#include <ns16550.h>
-
-#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */
-
-void NS16550_init (NS16550_t com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
-#ifdef CONFIG_OMAP
- com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
-#endif
- com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
-#if defined(CONFIG_OMAP)
-#if defined(CONFIG_APTIX)
- com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
-#else
- com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */
-#endif
-#endif
-}
-
-void NS16550_reinit (NS16550_t com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
-}
-
-void NS16550_putc (NS16550_t com_port, char c)
-{
- while ((com_port->lsr & LSR_THRE) == 0);
- com_port->thr = c;
-}
-
-char NS16550_getc (NS16550_t com_port)
-{
- while ((com_port->lsr & LSR_DR) == 0) {
-#ifdef CONFIG_USB_TTY
- extern void usbtty_poll(void);
- usbtty_poll();
-#endif
- }
- return (com_port->rbr);
-}
-
-int NS16550_tstc (NS16550_t com_port)
-{
- return ((com_port->lsr & LSR_DR) != 0);
-}
-
-#endif
+++ /dev/null
-/***********************************************************************
- *
- * Copyright (C) 2004 by FS Forth-Systeme GmbH.
- * All rights reserved.
- *
- * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
- * @Author: Markus Pietrek
- * @Descr: Serial driver for the NS9750. Only one UART is supported yet.
- * @References: [1] NS9750 Hardware Reference/December 2003
- * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ***********************************************************************/
-
-#include <common.h>
-
-#ifdef CFG_NS9750_UART
-
-#include "ns9750_bbus.h" /* for GPIOs */
-#include "ns9750_ser.h" /* for serial configuration */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_CONS_INDEX)
-#error "No console index specified."
-#endif
-
-#define CONSOLE CONFIG_CONS_INDEX
-
-static unsigned int calcBitrateRegister( void );
-static unsigned int calcRxCharGapRegister( void );
-
-static char cCharsAvailable; /* Numbers of chars in unCharCache */
-static unsigned int unCharCache; /* unCharCache is only valid if
- * cCharsAvailable > 0 */
-
-/***********************************************************************
- * @Function: serial_init
- * @Return: 0
- * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off
- ***********************************************************************/
-
-int serial_init( void )
-{
- unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 };
- unsigned int aunGPIORxD[] = { 1, 9, 41, 45 };
-
- cCharsAvailable = 0;
-
- /* configure TxD and RxD pins for their special function */
- set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT );
- set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ],
- NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT );
-
- /* configure serial engine */
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) =
- NS9750_SER_CTRL_A_CE |
- NS9750_SER_CTRL_A_STOP |
- NS9750_SER_CTRL_A_WLS_8;
-
- serial_setbrg();
-
- *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) =
- NS9750_SER_CTRL_B_RCGT;
-
- return 0;
-}
-
-/***********************************************************************
- * @Function: serial_putc
- * @Return: n/a
- * @Descr: writes one character to the FIFO. Blocks until FIFO is not full
- ***********************************************************************/
-
-void serial_putc( const char c )
-{
- if (c == '\n')
- serial_putc( '\r' );
-
- while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) &
- NS9750_SER_STAT_A_TRDY ) ) {
- /* do nothing, wait for characters in FIFO sent */
- }
-
- *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE) = c;
-}
-
-/***********************************************************************
- * @Function: serial_puts
- * @Return: n/a
- * @Descr: writes non-zero string to the FIFO.
- ***********************************************************************/
-
-void serial_puts( const char *s )
-{
- while (*s) {
- serial_putc( *s++ );
- }
-}
-
-/***********************************************************************
- * @Function: serial_getc
- * @Return: the character read
- * @Descr: performs only 8bit accesses to the FIFO. No error handling
- ***********************************************************************/
-
-int serial_getc( void )
-{
- int i;
-
- while (!serial_tstc() ) {
- /* do nothing, wait for incoming characters */
- }
-
- /* at least one character in unCharCache */
- i = (int) (unCharCache & 0xff);
-
- unCharCache >>= 8;
- cCharsAvailable--;
-
- return i;
-}
-
-/***********************************************************************
- * @Function: serial_tstc
- * @Return: 0 if no input available, otherwise != 0
- * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in
- * unCharCache and the numbers of characters in cCharsAvailable
- ***********************************************************************/
-
-int serial_tstc( void )
-{
- unsigned int unRegCache;
-
- if ( cCharsAvailable )
- return 1;
-
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE );
- if( unRegCache & NS9750_SER_STAT_A_RBC ) {
- *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) =
- NS9750_SER_STAT_A_RBC;
- unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,
- CONSOLE );
- }
-
- if ( unRegCache & NS9750_SER_STAT_A_RRDY ) {
- cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20;
- if ( !cCharsAvailable )
- cCharsAvailable = 4;
-
- unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO,
- CONSOLE );
- return 1;
- }
-
- /* no chars available */
- return 0;
-}
-
-void serial_setbrg( void )
-{
- *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) =
- calcBitrateRegister();
- *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) =
- calcRxCharGapRegister();
-}
-
-/***********************************************************************
- * @Function: calcBitrateRegister
- * @Return: value for the serial bitrate register
- * @Descr: register value depends on clock frequency and baudrate
- ***********************************************************************/
-
-static unsigned int calcBitrateRegister( void )
-{
- return ( NS9750_SER_BITRATE_EBIT |
- NS9750_SER_BITRATE_CLKMUX_BCLK |
- NS9750_SER_BITRATE_TMODE |
- NS9750_SER_BITRATE_TCDR_16 |
- NS9750_SER_BITRATE_RCDR_16 |
- ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */
- ( gd->baudrate * 16 ) ) - 1 ) &
- NS9750_SER_BITRATE_N_MA ) );
-}
-
-/***********************************************************************
- * @Function: calcRxCharGapRegister
- * @Return: value for the character gap timer register
- * @Descr: register value depends on clock frequency and baudrate. Currently 0
- * is used as there is a bug with the gap timer in PLL bypass mode.
- ***********************************************************************/
-
-static unsigned int calcRxCharGapRegister( void )
-{
- return NS9750_SER_RX_CHAR_TIMER_TRUN;
-}
-
-#endif /* CFG_NS9750_UART */
+++ /dev/null
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * MODULE: $Id:$
- * Description: UART/Serial interface for Samsung S3C4510B SoC
- * Runtime Env: ARM7TDMI
- * Change History:
- * 03-02-04 Create (Curt Brune) curt@cucy.com
- *
- */
-
-#include <common.h>
-
-#ifdef CONFIG_DRIVER_S3C4510_UART
-
-#include <asm/hardware.h>
-#include "s3c4510b_uart.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static UART *uart;
-
-/* flush serial input queue. returns 0 on success or negative error
- * number otherwise
- */
-static int serial_flush_input(void)
-{
- volatile u32 tmp;
-
- /* keep on reading as long as the receiver is not empty */
- while( uart->m_stat.bf.rxReady) {
- tmp = uart->m_rx;
- }
-
- return 0;
-}
-
-
-/* flush output queue. returns 0 on success or negative error number
- * otherwise
- */
-static int serial_flush_output(void)
-{
- /* wait until the transmitter is no longer busy */
- while( !uart->m_stat.bf.txBufEmpty);
-
- return 0;
-}
-
-
-void serial_setbrg (void)
-{
- UART_LINE_CTRL ulctrl;
- UART_CTRL uctrl;
- UART_BAUD_DIV ubd;
-
- serial_flush_output();
- serial_flush_input();
-
- /* control register */
- uctrl.ui = 0x0;
- uctrl.bf.rxMode = 0x1;
- uctrl.bf.rxIrq = 0x0;
- uctrl.bf.txMode = 0x1;
- uctrl.bf.DSR = 0x0;
- uctrl.bf.sendBreak = 0x0;
- uctrl.bf.loopBack = 0x0;
- uart->m_ctrl.ui = uctrl.ui;
-
- /* line control register */
- ulctrl.ui = 0x0;
- ulctrl.bf.wordLen = 0x3; /* 8 bit data */
- ulctrl.bf.nStop = 0x0; /* 1 stop bit */
- ulctrl.bf.parity = 0x0; /* no parity */
- ulctrl.bf.clk = 0x0; /* internal clock */
- ulctrl.bf.infra_red = 0x0; /* no infra_red */
- uart->m_lineCtrl.ui = ulctrl.ui;
-
- ubd.ui = 0x0;
-
- /* see table on page 10-15 in SAMSUNG S3C4510B manual */
- /* get correct divisor */
- switch(gd->baudrate) {
- case 1200: ubd.bf.cnt0 = 1301; break;
- case 2400: ubd.bf.cnt0 = 650; break;
- case 4800: ubd.bf.cnt0 = 324; break;
- case 9600: ubd.bf.cnt0 = 162; break;
- case 19200: ubd.bf.cnt0 = 80; break;
- case 38400: ubd.bf.cnt0 = 40; break;
- case 57600: ubd.bf.cnt0 = 26; break;
- case 115200: ubd.bf.cnt0 = 13; break;
- }
-
- uart->m_baudDiv.ui = ubd.ui;
- uart->m_baudCnt = 0x0;
- uart->m_baudClk = 0x0;
-
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-int serial_init (void)
-{
-
-#if CONFIG_SERIAL1 == 1
- uart = (UART *)UART0_BASE;
-#elif CONFIG_SERIAL1 == 2
- uart = (UART *)UART1_BASE;
-#else
-#error CONFIG_SERIAL1 not equal to 1 or 2
-#endif
-
- serial_setbrg ();
-
- return (0);
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c)
-{
- /* wait for room in the transmit FIFO */
- while( !uart->m_stat.bf.txBufEmpty);
-
- uart->m_tx = c;
-
- /*
- to be polite with serial console add a line feed
- to the carriage return character
- */
- if (c=='\n')
- serial_putc('\r');
-}
-
-/*
- * Test if an input byte is ready from the serial port. Returns non-zero on
- * success, 0 otherwise.
- */
-int serial_tstc (void)
-{
- return uart->m_stat.bf.rxReady;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-int serial_getc (void)
-{
- int rv;
-
- for(;;) {
- rv = serial_tstc();
-
- if (rv) {
- return uart->m_rx & 0xFF;
- }
- }
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-
- /* busy wait for tx complete */
- while ( !uart->m_stat.bf.txComplete);
-
- /* clear break */
- uart->m_ctrl.bf.sendBreak = 0;
-
-}
-
-#endif
+++ /dev/null
-#ifndef __UART_H
-#define __UART_H
-
-/*
- * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description: S3C4510B UART register layout
- */
-
-/* UART LINE CONTROL register */
-typedef struct __BF_UART_LINE_CTRL {
- u32 wordLen: 2;
- u32 nStop: 1;
- u32 parity: 3;
- u32 clk: 1;
- u32 infra_red: 1;
- u32 unused:24;
-} BF_UART_LINE_CTRL;
-
-typedef union _UART_LINE_CTRL {
- u32 ui;
- BF_UART_LINE_CTRL bf;
-} UART_LINE_CTRL;
-
-/* UART CONTROL register */
-typedef struct __BF_UART_CTRL {
- u32 rxMode: 2;
- u32 rxIrq: 1;
- u32 txMode: 2;
- u32 DSR: 1;
- u32 sendBreak: 1;
- u32 loopBack: 1;
- u32 unused:24;
-} BF_UART_CTRL;
-
-typedef union _UART_CTRL {
- u32 ui;
- BF_UART_CTRL bf;
-} UART_CTRL;
-
-/* UART STATUS register */
-typedef struct __BF_UART_STAT {
- u32 overrun: 1;
- u32 parity: 1;
- u32 frame: 1;
- u32 breakIrq: 1;
- u32 DTR: 1;
- u32 rxReady: 1;
- u32 txBufEmpty: 1;
- u32 txComplete: 1;
- u32 unused:24;
-} BF_UART_STAT;
-
-typedef union _UART_STAT {
- u32 ui;
- BF_UART_STAT bf;
-} UART_STAT;
-
-/* UART BAUD_DIV register */
-typedef struct __BF_UART_BAUD_DIV {
- u32 cnt1: 4;
- u32 cnt0:12;
- u32 unused:16;
-} BF_UART_BAUD_DIV;
-
-typedef union _UART_BAUD_DIV {
- u32 ui;
- BF_UART_BAUD_DIV bf;
-} UART_BAUD_DIV;
-
-/* UART register block */
-typedef struct __UART {
- volatile UART_LINE_CTRL m_lineCtrl;
- volatile UART_CTRL m_ctrl;
- volatile UART_STAT m_stat;
- volatile u32 m_tx;
- volatile u32 m_rx;
- volatile UART_BAUD_DIV m_baudDiv;
- volatile u32 m_baudCnt;
- volatile u32 m_baudClk;
-} UART;
-
-#define NL 0x0A
-#define CR 0x0D
-#define BSP 0x08
-#define ESC 0x1B
-#define CTRLZ 0x1A
-#define RUBOUT 0x7F
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_NS16550_SERIAL
-
-#include <ns16550.h>
-#ifdef CFG_NS87308
-#include <ns87308.h>
-#endif
-
-#if defined (CONFIG_SERIAL_MULTI)
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_CONS_INDEX)
-#if defined (CONFIG_SERIAL_MULTI)
-/* with CONFIG_SERIAL_MULTI we might have no console
- * on these devices
- */
-#else
-#error "No console index specified."
-#endif /* CONFIG_SERIAL_MULTI */
-#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
-#error "Invalid console index value."
-#endif
-
-#if CONFIG_CONS_INDEX == 1 && !defined(CFG_NS16550_COM1)
-#error "Console port 1 defined but not configured."
-#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_NS16550_COM2)
-#error "Console port 2 defined but not configured."
-#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_NS16550_COM3)
-#error "Console port 3 defined but not configured."
-#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_NS16550_COM4)
-#error "Console port 4 defined but not configured."
-#endif
-
-/* Note: The port number specified in the functions is 1 based.
- * the array is 0 based.
- */
-static NS16550_t serial_ports[4] = {
-#ifdef CFG_NS16550_COM1
- (NS16550_t)CFG_NS16550_COM1,
-#else
- NULL,
-#endif
-#ifdef CFG_NS16550_COM2
- (NS16550_t)CFG_NS16550_COM2,
-#else
- NULL,
-#endif
-#ifdef CFG_NS16550_COM3
- (NS16550_t)CFG_NS16550_COM3,
-#else
- NULL,
-#endif
-#ifdef CFG_NS16550_COM4
- (NS16550_t)CFG_NS16550_COM4
-#else
- NULL
-#endif
-};
-
-#define PORT serial_ports[port-1]
-#if defined(CONFIG_CONS_INDEX)
-#define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1])
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-
-/* Multi serial device functions */
-#define DECLARE_ESERIAL_FUNCTIONS(port) \
- int eserial##port##_init (void) {\
- int clock_divisor; \
- clock_divisor = calc_divisor(serial_ports[port-1]); \
- NS16550_init(serial_ports[port-1], clock_divisor); \
- return(0);}\
- void eserial##port##_setbrg (void) {\
- serial_setbrg_dev(port);}\
- int eserial##port##_getc (void) {\
- return serial_getc_dev(port);}\
- int eserial##port##_tstc (void) {\
- return serial_tstc_dev(port);}\
- void eserial##port##_putc (const char c) {\
- serial_putc_dev(port, c);}\
- void eserial##port##_puts (const char *s) {\
- serial_puts_dev(port, s);}
-
-/* Serial device descriptor */
-#define INIT_ESERIAL_STRUCTURE(port,name,bus) {\
- name,\
- bus,\
- eserial##port##_init,\
- eserial##port##_setbrg,\
- eserial##port##_getc,\
- eserial##port##_tstc,\
- eserial##port##_putc,\
- eserial##port##_puts, }
-
-#endif /* CONFIG_SERIAL_MULTI */
-
-static int calc_divisor (NS16550_t port)
-{
-#ifdef CONFIG_OMAP1510
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
- port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
- return (1); /* return 1 for base divisor */
- }
- port->osc_12m_sel = 0; /* clear if previsouly set */
-#endif
-#ifdef CONFIG_OMAP1610
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
- return (26); /* return 26 for base divisor */
- }
-#endif
-
-#ifdef CONFIG_APTIX
-#define MODE_X_DIV 13
-#else
-#define MODE_X_DIV 16
-#endif
- return (CFG_NS16550_CLK / MODE_X_DIV / gd->baudrate);
-
-}
-
-#if !defined(CONFIG_SERIAL_MULTI)
-int serial_init (void)
-{
- int clock_divisor;
-
-#ifdef CFG_NS87308
- initialise_ns87308();
-#endif
-
-#ifdef CFG_NS16550_COM1
- clock_divisor = calc_divisor(serial_ports[0]);
- NS16550_init(serial_ports[0], clock_divisor);
-#endif
-#ifdef CFG_NS16550_COM2
- clock_divisor = calc_divisor(serial_ports[1]);
- NS16550_init(serial_ports[1], clock_divisor);
-#endif
-#ifdef CFG_NS16550_COM3
- clock_divisor = calc_divisor(serial_ports[2]);
- NS16550_init(serial_ports[2], clock_divisor);
-#endif
-#ifdef CFG_NS16550_COM4
- clock_divisor = calc_divisor(serial_ports[3]);
- NS16550_init(serial_ports[3], clock_divisor);
-#endif
-
- return (0);
-}
-#endif
-
-void
-_serial_putc(const char c,const int port)
-{
- if (c == '\n')
- NS16550_putc(PORT, '\r');
-
- NS16550_putc(PORT, c);
-}
-
-void
-_serial_putc_raw(const char c,const int port)
-{
- NS16550_putc(PORT, c);
-}
-
-void
-_serial_puts (const char *s,const int port)
-{
- while (*s) {
- _serial_putc (*s++,port);
- }
-}
-
-
-int
-_serial_getc(const int port)
-{
- return NS16550_getc(PORT);
-}
-
-int
-_serial_tstc(const int port)
-{
- return NS16550_tstc(PORT);
-}
-
-void
-_serial_setbrg (const int port)
-{
- int clock_divisor;
-
- clock_divisor = calc_divisor(PORT);
- NS16550_reinit(PORT, clock_divisor);
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_putc_dev(unsigned int dev_index,const char c)
-{
- _serial_putc(c,dev_index);
-}
-#else
-void
-serial_putc(const char c)
-{
- _serial_putc(c,CONFIG_CONS_INDEX);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_putc_raw_dev(unsigned int dev_index,const char c)
-{
- _serial_putc_raw(c,dev_index);
-}
-#else
-void
-serial_putc_raw(const char c)
-{
- _serial_putc_raw(c,CONFIG_CONS_INDEX);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_puts_dev(unsigned int dev_index,const char *s)
-{
- _serial_puts(s,dev_index);
-}
-#else
-void
-serial_puts(const char *s)
-{
- _serial_puts(s,CONFIG_CONS_INDEX);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-static inline int
-serial_getc_dev(unsigned int dev_index)
-{
- return _serial_getc(dev_index);
-}
-#else
-int
-serial_getc(void)
-{
- return _serial_getc(CONFIG_CONS_INDEX);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-static inline int
-serial_tstc_dev(unsigned int dev_index)
-{
- return _serial_tstc(dev_index);
-}
-#else
-int
-serial_tstc(void)
-{
- return _serial_tstc(CONFIG_CONS_INDEX);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-static inline void
-serial_setbrg_dev(unsigned int dev_index)
-{
- _serial_setbrg(dev_index);
-}
-#else
-void
-serial_setbrg(void)
-{
- _serial_setbrg(CONFIG_CONS_INDEX);
-}
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-
-DECLARE_ESERIAL_FUNCTIONS(1);
-struct serial_device eserial1_device =
- INIT_ESERIAL_STRUCTURE(1,"eserial0","EUART1");
-DECLARE_ESERIAL_FUNCTIONS(2);
-struct serial_device eserial2_device =
- INIT_ESERIAL_STRUCTURE(2,"eserial1","EUART2");
-DECLARE_ESERIAL_FUNCTIONS(3);
-struct serial_device eserial3_device =
- INIT_ESERIAL_STRUCTURE(3,"eserial2","EUART3");
-DECLARE_ESERIAL_FUNCTIONS(4);
-struct serial_device eserial4_device =
- INIT_ESERIAL_STRUCTURE(4,"eserial3","EUART4");
-#endif /* CONFIG_SERIAL_MULTI */
-
-#endif
LIB := $(obj)libserial.a
-COBJS := mcfuart.o serial_pl010.o serial_pl011.o
-
+COBJS-y += atmel_usart.o
+COBJS-y += mcfuart.o
+COBJS-y += ns9750_serial.o
+COBJS-y += ns16550.o
+COBJS-y += s3c4510b_uart.o
+COBJS-y += serial.o
+COBJS-y += serial_max3100.o
+COBJS-y += serial_pl010.o
+COBJS-y += serial_pl011.o
+COBJS-y += serial_xuartlite.o
+COBJS-y += usbtty.o
+
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
--- /dev/null
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <common.h>
+
+#ifdef CONFIG_ATMEL_USART
+#include <asm/io.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/memory-map.h>
+
+#if defined(CONFIG_USART0)
+# define USART_ID 0
+# define USART_BASE USART0_BASE
+#elif defined(CONFIG_USART1)
+# define USART_ID 1
+# define USART_BASE USART1_BASE
+#elif defined(CONFIG_USART2)
+# define USART_ID 2
+# define USART_BASE USART2_BASE
+#elif defined(CONFIG_USART3)
+# define USART_ID 3
+# define USART_BASE USART3_BASE
+#endif
+
+#include "atmel_usart.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void serial_setbrg(void)
+{
+ unsigned long divisor;
+ unsigned long usart_hz;
+
+ /*
+ * Master Clock
+ * Baud Rate = --------------
+ * 16 * CD
+ */
+ usart_hz = get_usart_clk_rate(USART_ID);
+ divisor = (usart_hz / 16 + gd->baudrate / 2) / gd->baudrate;
+ usart3_writel(BRGR, USART3_BF(CD, divisor));
+}
+
+int serial_init(void)
+{
+ usart3_writel(CR, USART3_BIT(RSTRX) | USART3_BIT(RSTTX));
+
+ serial_setbrg();
+
+ usart3_writel(CR, USART3_BIT(RXEN) | USART3_BIT(TXEN));
+ usart3_writel(MR, (USART3_BF(USART_MODE, USART3_USART_MODE_NORMAL)
+ | USART3_BF(USCLKS, USART3_USCLKS_MCK)
+ | USART3_BF(CHRL, USART3_CHRL_8)
+ | USART3_BF(PAR, USART3_PAR_NONE)
+ | USART3_BF(NBSTOP, USART3_NBSTOP_1)));
+
+ return 0;
+}
+
+void serial_putc(char c)
+{
+ if (c == '\n')
+ serial_putc('\r');
+
+ while (!(usart3_readl(CSR) & USART3_BIT(TXRDY))) ;
+ usart3_writel(THR, c);
+}
+
+void serial_puts(const char *s)
+{
+ while (*s)
+ serial_putc(*s++);
+}
+
+int serial_getc(void)
+{
+ while (!(usart3_readl(CSR) & USART3_BIT(RXRDY))) ;
+ return usart3_readl(RHR);
+}
+
+int serial_tstc(void)
+{
+ return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0;
+}
+
+#endif /* CONFIG_ATMEL_USART */
--- /dev/null
+/*
+ * Register definitions for the Atmel USART3 module.
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __DRIVERS_ATMEL_USART_H__
+#define __DRIVERS_ATMEL_USART_H__
+
+/* USART3 register offsets */
+#define USART3_CR 0x0000
+#define USART3_MR 0x0004
+#define USART3_IER 0x0008
+#define USART3_IDR 0x000c
+#define USART3_IMR 0x0010
+#define USART3_CSR 0x0014
+#define USART3_RHR 0x0018
+#define USART3_THR 0x001c
+#define USART3_BRGR 0x0020
+#define USART3_RTOR 0x0024
+#define USART3_TTGR 0x0028
+#define USART3_FIDI 0x0040
+#define USART3_NER 0x0044
+#define USART3_XXR 0x0048
+#define USART3_IFR 0x004c
+#define USART3_RPR 0x0100
+#define USART3_RCR 0x0104
+#define USART3_TPR 0x0108
+#define USART3_TCR 0x010c
+#define USART3_RNPR 0x0110
+#define USART3_RNCR 0x0114
+#define USART3_TNPR 0x0118
+#define USART3_TNCR 0x011c
+#define USART3_PTCR 0x0120
+#define USART3_PTSR 0x0124
+
+/* Bitfields in CR */
+#define USART3_RSTRX_OFFSET 2
+#define USART3_RSTRX_SIZE 1
+#define USART3_RSTTX_OFFSET 3
+#define USART3_RSTTX_SIZE 1
+#define USART3_RXEN_OFFSET 4
+#define USART3_RXEN_SIZE 1
+#define USART3_RXDIS_OFFSET 5
+#define USART3_RXDIS_SIZE 1
+#define USART3_TXEN_OFFSET 6
+#define USART3_TXEN_SIZE 1
+#define USART3_TXDIS_OFFSET 7
+#define USART3_TXDIS_SIZE 1
+#define USART3_RSTSTA_OFFSET 8
+#define USART3_RSTSTA_SIZE 1
+#define USART3_STTBRK_OFFSET 9
+#define USART3_STTBRK_SIZE 1
+#define USART3_STPBRK_OFFSET 10
+#define USART3_STPBRK_SIZE 1
+#define USART3_STTTO_OFFSET 11
+#define USART3_STTTO_SIZE 1
+#define USART3_SENDA_OFFSET 12
+#define USART3_SENDA_SIZE 1
+#define USART3_RSTIT_OFFSET 13
+#define USART3_RSTIT_SIZE 1
+#define USART3_RSTNACK_OFFSET 14
+#define USART3_RSTNACK_SIZE 1
+#define USART3_RETTO_OFFSET 15
+#define USART3_RETTO_SIZE 1
+#define USART3_DTREN_OFFSET 16
+#define USART3_DTREN_SIZE 1
+#define USART3_DTRDIS_OFFSET 17
+#define USART3_DTRDIS_SIZE 1
+#define USART3_RTSEN_OFFSET 18
+#define USART3_RTSEN_SIZE 1
+#define USART3_RTSDIS_OFFSET 19
+#define USART3_RTSDIS_SIZE 1
+#define USART3_COMM_TX_OFFSET 30
+#define USART3_COMM_TX_SIZE 1
+#define USART3_COMM_RX_OFFSET 31
+#define USART3_COMM_RX_SIZE 1
+
+/* Bitfields in MR */
+#define USART3_USART_MODE_OFFSET 0
+#define USART3_USART_MODE_SIZE 4
+#define USART3_USCLKS_OFFSET 4
+#define USART3_USCLKS_SIZE 2
+#define USART3_CHRL_OFFSET 6
+#define USART3_CHRL_SIZE 2
+#define USART3_SYNC_OFFSET 8
+#define USART3_SYNC_SIZE 1
+#define USART3_PAR_OFFSET 9
+#define USART3_PAR_SIZE 3
+#define USART3_NBSTOP_OFFSET 12
+#define USART3_NBSTOP_SIZE 2
+#define USART3_CHMODE_OFFSET 14
+#define USART3_CHMODE_SIZE 2
+#define USART3_MSBF_OFFSET 16
+#define USART3_MSBF_SIZE 1
+#define USART3_MODE9_OFFSET 17
+#define USART3_MODE9_SIZE 1
+#define USART3_CLKO_OFFSET 18
+#define USART3_CLKO_SIZE 1
+#define USART3_OVER_OFFSET 19
+#define USART3_OVER_SIZE 1
+#define USART3_INACK_OFFSET 20
+#define USART3_INACK_SIZE 1
+#define USART3_DSNACK_OFFSET 21
+#define USART3_DSNACK_SIZE 1
+#define USART3_MAX_ITERATION_OFFSET 24
+#define USART3_MAX_ITERATION_SIZE 3
+#define USART3_FILTER_OFFSET 28
+#define USART3_FILTER_SIZE 1
+
+/* Bitfields in CSR */
+#define USART3_RXRDY_OFFSET 0
+#define USART3_RXRDY_SIZE 1
+#define USART3_TXRDY_OFFSET 1
+#define USART3_TXRDY_SIZE 1
+#define USART3_RXBRK_OFFSET 2
+#define USART3_RXBRK_SIZE 1
+#define USART3_ENDRX_OFFSET 3
+#define USART3_ENDRX_SIZE 1
+#define USART3_ENDTX_OFFSET 4
+#define USART3_ENDTX_SIZE 1
+#define USART3_OVRE_OFFSET 5
+#define USART3_OVRE_SIZE 1
+#define USART3_FRAME_OFFSET 6
+#define USART3_FRAME_SIZE 1
+#define USART3_PARE_OFFSET 7
+#define USART3_PARE_SIZE 1
+#define USART3_TIMEOUT_OFFSET 8
+#define USART3_TIMEOUT_SIZE 1
+#define USART3_TXEMPTY_OFFSET 9
+#define USART3_TXEMPTY_SIZE 1
+#define USART3_ITERATION_OFFSET 10
+#define USART3_ITERATION_SIZE 1
+#define USART3_TXBUFE_OFFSET 11
+#define USART3_TXBUFE_SIZE 1
+#define USART3_RXBUFF_OFFSET 12
+#define USART3_RXBUFF_SIZE 1
+#define USART3_NACK_OFFSET 13
+#define USART3_NACK_SIZE 1
+#define USART3_RIIC_OFFSET 16
+#define USART3_RIIC_SIZE 1
+#define USART3_DSRIC_OFFSET 17
+#define USART3_DSRIC_SIZE 1
+#define USART3_DCDIC_OFFSET 18
+#define USART3_DCDIC_SIZE 1
+#define USART3_CTSIC_OFFSET 19
+#define USART3_CTSIC_SIZE 1
+#define USART3_RI_OFFSET 20
+#define USART3_RI_SIZE 1
+#define USART3_DSR_OFFSET 21
+#define USART3_DSR_SIZE 1
+#define USART3_DCD_OFFSET 22
+#define USART3_DCD_SIZE 1
+#define USART3_CTS_OFFSET 23
+#define USART3_CTS_SIZE 1
+
+/* Bitfields in RHR */
+#define USART3_RXCHR_OFFSET 0
+#define USART3_RXCHR_SIZE 9
+
+/* Bitfields in THR */
+#define USART3_TXCHR_OFFSET 0
+#define USART3_TXCHR_SIZE 9
+
+/* Bitfields in BRGR */
+#define USART3_CD_OFFSET 0
+#define USART3_CD_SIZE 16
+
+/* Bitfields in RTOR */
+#define USART3_TO_OFFSET 0
+#define USART3_TO_SIZE 16
+
+/* Bitfields in TTGR */
+#define USART3_TG_OFFSET 0
+#define USART3_TG_SIZE 8
+
+/* Bitfields in FIDI */
+#define USART3_FI_DI_RATIO_OFFSET 0
+#define USART3_FI_DI_RATIO_SIZE 11
+
+/* Bitfields in NER */
+#define USART3_NB_ERRORS_OFFSET 0
+#define USART3_NB_ERRORS_SIZE 8
+
+/* Bitfields in XXR */
+#define USART3_XOFF_OFFSET 0
+#define USART3_XOFF_SIZE 8
+#define USART3_XON_OFFSET 8
+#define USART3_XON_SIZE 8
+
+/* Bitfields in IFR */
+#define USART3_IRDA_FILTER_OFFSET 0
+#define USART3_IRDA_FILTER_SIZE 8
+
+/* Bitfields in RCR */
+#define USART3_RXCTR_OFFSET 0
+#define USART3_RXCTR_SIZE 16
+
+/* Bitfields in TCR */
+#define USART3_TXCTR_OFFSET 0
+#define USART3_TXCTR_SIZE 16
+
+/* Bitfields in RNCR */
+#define USART3_RXNCR_OFFSET 0
+#define USART3_RXNCR_SIZE 16
+
+/* Bitfields in TNCR */
+#define USART3_TXNCR_OFFSET 0
+#define USART3_TXNCR_SIZE 16
+
+/* Bitfields in PTCR */
+#define USART3_RXTEN_OFFSET 0
+#define USART3_RXTEN_SIZE 1
+#define USART3_RXTDIS_OFFSET 1
+#define USART3_RXTDIS_SIZE 1
+#define USART3_TXTEN_OFFSET 8
+#define USART3_TXTEN_SIZE 1
+#define USART3_TXTDIS_OFFSET 9
+#define USART3_TXTDIS_SIZE 1
+
+/* Constants for USART_MODE */
+#define USART3_USART_MODE_NORMAL 0
+#define USART3_USART_MODE_RS485 1
+#define USART3_USART_MODE_HARDWARE 2
+#define USART3_USART_MODE_MODEM 3
+#define USART3_USART_MODE_ISO7816_T0 4
+#define USART3_USART_MODE_ISO7816_T1 6
+#define USART3_USART_MODE_IRDA 8
+
+/* Constants for USCLKS */
+#define USART3_USCLKS_MCK 0
+#define USART3_USCLKS_MCK_DIV 1
+#define USART3_USCLKS_SCK 3
+
+/* Constants for CHRL */
+#define USART3_CHRL_5 0
+#define USART3_CHRL_6 1
+#define USART3_CHRL_7 2
+#define USART3_CHRL_8 3
+
+/* Constants for PAR */
+#define USART3_PAR_EVEN 0
+#define USART3_PAR_ODD 1
+#define USART3_PAR_SPACE 2
+#define USART3_PAR_MARK 3
+#define USART3_PAR_NONE 4
+#define USART3_PAR_MULTI 6
+
+/* Constants for NBSTOP */
+#define USART3_NBSTOP_1 0
+#define USART3_NBSTOP_1_5 1
+#define USART3_NBSTOP_2 2
+
+/* Constants for CHMODE */
+#define USART3_CHMODE_NORMAL 0
+#define USART3_CHMODE_ECHO 1
+#define USART3_CHMODE_LOCAL_LOOP 2
+#define USART3_CHMODE_REMOTE_LOOP 3
+
+/* Constants for MSBF */
+#define USART3_MSBF_LSBF 0
+#define USART3_MSBF_MSBF 1
+
+/* Constants for OVER */
+#define USART3_OVER_X16 0
+#define USART3_OVER_X8 1
+
+/* Constants for CD */
+#define USART3_CD_DISABLE 0
+#define USART3_CD_BYPASS 1
+
+/* Constants for TO */
+#define USART3_TO_DISABLE 0
+
+/* Constants for TG */
+#define USART3_TG_DISABLE 0
+
+/* Constants for FI_DI_RATIO */
+#define USART3_FI_DI_RATIO_DISABLE 0
+
+/* Bit manipulation macros */
+#define USART3_BIT(name) \
+ (1 << USART3_##name##_OFFSET)
+#define USART3_BF(name,value) \
+ (((value) & ((1 << USART3_##name##_SIZE) - 1)) \
+ << USART3_##name##_OFFSET)
+#define USART3_BFEXT(name,value) \
+ (((value) >> USART3_##name##_OFFSET) \
+ & ((1 << USART3_##name##_SIZE) - 1))
+#define USART3_BFINS(name,value,old) \
+ (((old) & ~(((1 << USART3_##name##_SIZE) - 1) \
+ << USART3_##name##_OFFSET)) \
+ | USART3_BF(name,value))
+
+/* Register access macros */
+#define usart3_readl(reg) \
+ readl((void *)USART_BASE + USART3_##reg)
+#define usart3_writel(reg,value) \
+ writel((value), (void *)USART_BASE + USART3_##reg)
+
+#endif /* __DRIVERS_ATMEL_USART_H__ */
--- /dev/null
+/*
+ * COM1 NS16550 support
+ * originally from linux source (arch/ppc/boot/ns16550.c)
+ * modified to use CFG_ISA_MEM and new defines
+ */
+
+#include <config.h>
+
+#ifdef CFG_NS16550
+
+#include <ns16550.h>
+
+#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */
+#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */
+#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */
+
+void NS16550_init (NS16550_t com_port, int baud_divisor)
+{
+ com_port->ier = 0x00;
+#ifdef CONFIG_OMAP
+ com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
+#endif
+ com_port->lcr = LCR_BKSE | LCRVAL;
+ com_port->dll = baud_divisor & 0xff;
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCRVAL;
+ com_port->mcr = MCRVAL;
+ com_port->fcr = FCRVAL;
+#if defined(CONFIG_OMAP)
+#if defined(CONFIG_APTIX)
+ com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
+#else
+ com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */
+#endif
+#endif
+}
+
+void NS16550_reinit (NS16550_t com_port, int baud_divisor)
+{
+ com_port->ier = 0x00;
+ com_port->lcr = LCR_BKSE;
+ com_port->dll = baud_divisor & 0xff;
+ com_port->dlm = (baud_divisor >> 8) & 0xff;
+ com_port->lcr = LCRVAL;
+ com_port->mcr = MCRVAL;
+ com_port->fcr = FCRVAL;
+}
+
+void NS16550_putc (NS16550_t com_port, char c)
+{
+ while ((com_port->lsr & LSR_THRE) == 0);
+ com_port->thr = c;
+}
+
+char NS16550_getc (NS16550_t com_port)
+{
+ while ((com_port->lsr & LSR_DR) == 0) {
+#ifdef CONFIG_USB_TTY
+ extern void usbtty_poll(void);
+ usbtty_poll();
+#endif
+ }
+ return (com_port->rbr);
+}
+
+int NS16550_tstc (NS16550_t com_port)
+{
+ return ((com_port->lsr & LSR_DR) != 0);
+}
+
+#endif
--- /dev/null
+/***********************************************************************
+ *
+ * Copyright (C) 2004 by FS Forth-Systeme GmbH.
+ * All rights reserved.
+ *
+ * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $
+ * @Author: Markus Pietrek
+ * @Descr: Serial driver for the NS9750. Only one UART is supported yet.
+ * @References: [1] NS9750 Hardware Reference/December 2003
+ * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ***********************************************************************/
+
+#include <common.h>
+
+#ifdef CFG_NS9750_UART
+
+#include "ns9750_bbus.h" /* for GPIOs */
+#include "ns9750_ser.h" /* for serial configuration */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_CONS_INDEX)
+#error "No console index specified."
+#endif
+
+#define CONSOLE CONFIG_CONS_INDEX
+
+static unsigned int calcBitrateRegister( void );
+static unsigned int calcRxCharGapRegister( void );
+
+static char cCharsAvailable; /* Numbers of chars in unCharCache */
+static unsigned int unCharCache; /* unCharCache is only valid if
+ * cCharsAvailable > 0 */
+
+/***********************************************************************
+ * @Function: serial_init
+ * @Return: 0
+ * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off
+ ***********************************************************************/
+
+int serial_init( void )
+{
+ unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 };
+ unsigned int aunGPIORxD[] = { 1, 9, 41, 45 };
+
+ cCharsAvailable = 0;
+
+ /* configure TxD and RxD pins for their special function */
+ set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ],
+ NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT );
+ set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ],
+ NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT );
+
+ /* configure serial engine */
+ *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) =
+ NS9750_SER_CTRL_A_CE |
+ NS9750_SER_CTRL_A_STOP |
+ NS9750_SER_CTRL_A_WLS_8;
+
+ serial_setbrg();
+
+ *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) =
+ NS9750_SER_CTRL_B_RCGT;
+
+ return 0;
+}
+
+/***********************************************************************
+ * @Function: serial_putc
+ * @Return: n/a
+ * @Descr: writes one character to the FIFO. Blocks until FIFO is not full
+ ***********************************************************************/
+
+void serial_putc( const char c )
+{
+ if (c == '\n')
+ serial_putc( '\r' );
+
+ while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) &
+ NS9750_SER_STAT_A_TRDY ) ) {
+ /* do nothing, wait for characters in FIFO sent */
+ }
+
+ *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO,
+ CONSOLE) = c;
+}
+
+/***********************************************************************
+ * @Function: serial_puts
+ * @Return: n/a
+ * @Descr: writes non-zero string to the FIFO.
+ ***********************************************************************/
+
+void serial_puts( const char *s )
+{
+ while (*s) {
+ serial_putc( *s++ );
+ }
+}
+
+/***********************************************************************
+ * @Function: serial_getc
+ * @Return: the character read
+ * @Descr: performs only 8bit accesses to the FIFO. No error handling
+ ***********************************************************************/
+
+int serial_getc( void )
+{
+ int i;
+
+ while (!serial_tstc() ) {
+ /* do nothing, wait for incoming characters */
+ }
+
+ /* at least one character in unCharCache */
+ i = (int) (unCharCache & 0xff);
+
+ unCharCache >>= 8;
+ cCharsAvailable--;
+
+ return i;
+}
+
+/***********************************************************************
+ * @Function: serial_tstc
+ * @Return: 0 if no input available, otherwise != 0
+ * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in
+ * unCharCache and the numbers of characters in cCharsAvailable
+ ***********************************************************************/
+
+int serial_tstc( void )
+{
+ unsigned int unRegCache;
+
+ if ( cCharsAvailable )
+ return 1;
+
+ unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE );
+ if( unRegCache & NS9750_SER_STAT_A_RBC ) {
+ *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) =
+ NS9750_SER_STAT_A_RBC;
+ unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,
+ CONSOLE );
+ }
+
+ if ( unRegCache & NS9750_SER_STAT_A_RRDY ) {
+ cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20;
+ if ( !cCharsAvailable )
+ cCharsAvailable = 4;
+
+ unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO,
+ CONSOLE );
+ return 1;
+ }
+
+ /* no chars available */
+ return 0;
+}
+
+void serial_setbrg( void )
+{
+ *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) =
+ calcBitrateRegister();
+ *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) =
+ calcRxCharGapRegister();
+}
+
+/***********************************************************************
+ * @Function: calcBitrateRegister
+ * @Return: value for the serial bitrate register
+ * @Descr: register value depends on clock frequency and baudrate
+ ***********************************************************************/
+
+static unsigned int calcBitrateRegister( void )
+{
+ return ( NS9750_SER_BITRATE_EBIT |
+ NS9750_SER_BITRATE_CLKMUX_BCLK |
+ NS9750_SER_BITRATE_TMODE |
+ NS9750_SER_BITRATE_TCDR_16 |
+ NS9750_SER_BITRATE_RCDR_16 |
+ ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */
+ ( gd->baudrate * 16 ) ) - 1 ) &
+ NS9750_SER_BITRATE_N_MA ) );
+}
+
+/***********************************************************************
+ * @Function: calcRxCharGapRegister
+ * @Return: value for the character gap timer register
+ * @Descr: register value depends on clock frequency and baudrate. Currently 0
+ * is used as there is a bug with the gap timer in PLL bypass mode.
+ ***********************************************************************/
+
+static unsigned int calcRxCharGapRegister( void )
+{
+ return NS9750_SER_RX_CHAR_TIMER_TRUN;
+}
+
+#endif /* CFG_NS9750_UART */
--- /dev/null
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * MODULE: $Id:$
+ * Description: UART/Serial interface for Samsung S3C4510B SoC
+ * Runtime Env: ARM7TDMI
+ * Change History:
+ * 03-02-04 Create (Curt Brune) curt@cucy.com
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_S3C4510_UART
+
+#include <asm/hardware.h>
+#include "s3c4510b_uart.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static UART *uart;
+
+/* flush serial input queue. returns 0 on success or negative error
+ * number otherwise
+ */
+static int serial_flush_input(void)
+{
+ volatile u32 tmp;
+
+ /* keep on reading as long as the receiver is not empty */
+ while( uart->m_stat.bf.rxReady) {
+ tmp = uart->m_rx;
+ }
+
+ return 0;
+}
+
+
+/* flush output queue. returns 0 on success or negative error number
+ * otherwise
+ */
+static int serial_flush_output(void)
+{
+ /* wait until the transmitter is no longer busy */
+ while( !uart->m_stat.bf.txBufEmpty);
+
+ return 0;
+}
+
+
+void serial_setbrg (void)
+{
+ UART_LINE_CTRL ulctrl;
+ UART_CTRL uctrl;
+ UART_BAUD_DIV ubd;
+
+ serial_flush_output();
+ serial_flush_input();
+
+ /* control register */
+ uctrl.ui = 0x0;
+ uctrl.bf.rxMode = 0x1;
+ uctrl.bf.rxIrq = 0x0;
+ uctrl.bf.txMode = 0x1;
+ uctrl.bf.DSR = 0x0;
+ uctrl.bf.sendBreak = 0x0;
+ uctrl.bf.loopBack = 0x0;
+ uart->m_ctrl.ui = uctrl.ui;
+
+ /* line control register */
+ ulctrl.ui = 0x0;
+ ulctrl.bf.wordLen = 0x3; /* 8 bit data */
+ ulctrl.bf.nStop = 0x0; /* 1 stop bit */
+ ulctrl.bf.parity = 0x0; /* no parity */
+ ulctrl.bf.clk = 0x0; /* internal clock */
+ ulctrl.bf.infra_red = 0x0; /* no infra_red */
+ uart->m_lineCtrl.ui = ulctrl.ui;
+
+ ubd.ui = 0x0;
+
+ /* see table on page 10-15 in SAMSUNG S3C4510B manual */
+ /* get correct divisor */
+ switch(gd->baudrate) {
+ case 1200: ubd.bf.cnt0 = 1301; break;
+ case 2400: ubd.bf.cnt0 = 650; break;
+ case 4800: ubd.bf.cnt0 = 324; break;
+ case 9600: ubd.bf.cnt0 = 162; break;
+ case 19200: ubd.bf.cnt0 = 80; break;
+ case 38400: ubd.bf.cnt0 = 40; break;
+ case 57600: ubd.bf.cnt0 = 26; break;
+ case 115200: ubd.bf.cnt0 = 13; break;
+ }
+
+ uart->m_baudDiv.ui = ubd.ui;
+ uart->m_baudCnt = 0x0;
+ uart->m_baudClk = 0x0;
+
+}
+
+
+/*
+ * Initialise the serial port with the given baudrate. The settings
+ * are always 8 data bits, no parity, 1 stop bit, no start bits.
+ *
+ */
+int serial_init (void)
+{
+
+#if CONFIG_SERIAL1 == 1
+ uart = (UART *)UART0_BASE;
+#elif CONFIG_SERIAL1 == 2
+ uart = (UART *)UART1_BASE;
+#else
+#error CONFIG_SERIAL1 not equal to 1 or 2
+#endif
+
+ serial_setbrg ();
+
+ return (0);
+}
+
+
+/*
+ * Output a single byte to the serial port.
+ */
+void serial_putc (const char c)
+{
+ /* wait for room in the transmit FIFO */
+ while( !uart->m_stat.bf.txBufEmpty);
+
+ uart->m_tx = c;
+
+ /*
+ to be polite with serial console add a line feed
+ to the carriage return character
+ */
+ if (c=='\n')
+ serial_putc('\r');
+}
+
+/*
+ * Test if an input byte is ready from the serial port. Returns non-zero on
+ * success, 0 otherwise.
+ */
+int serial_tstc (void)
+{
+ return uart->m_stat.bf.rxReady;
+}
+
+/*
+ * Read a single byte from the serial port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+int serial_getc (void)
+{
+ int rv;
+
+ for(;;) {
+ rv = serial_tstc();
+
+ if (rv) {
+ return uart->m_rx & 0xFF;
+ }
+ }
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+
+ /* busy wait for tx complete */
+ while ( !uart->m_stat.bf.txComplete);
+
+ /* clear break */
+ uart->m_ctrl.bf.sendBreak = 0;
+
+}
+
+#endif
--- /dev/null
+#ifndef __UART_H
+#define __UART_H
+
+/*
+ * Copyright (c) 2004 Cucy Systems (http://www.cucy.com)
+ * Curt Brune <curt@cucy.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Description: S3C4510B UART register layout
+ */
+
+/* UART LINE CONTROL register */
+typedef struct __BF_UART_LINE_CTRL {
+ u32 wordLen: 2;
+ u32 nStop: 1;
+ u32 parity: 3;
+ u32 clk: 1;
+ u32 infra_red: 1;
+ u32 unused:24;
+} BF_UART_LINE_CTRL;
+
+typedef union _UART_LINE_CTRL {
+ u32 ui;
+ BF_UART_LINE_CTRL bf;
+} UART_LINE_CTRL;
+
+/* UART CONTROL register */
+typedef struct __BF_UART_CTRL {
+ u32 rxMode: 2;
+ u32 rxIrq: 1;
+ u32 txMode: 2;
+ u32 DSR: 1;
+ u32 sendBreak: 1;
+ u32 loopBack: 1;
+ u32 unused:24;
+} BF_UART_CTRL;
+
+typedef union _UART_CTRL {
+ u32 ui;
+ BF_UART_CTRL bf;
+} UART_CTRL;
+
+/* UART STATUS register */
+typedef struct __BF_UART_STAT {
+ u32 overrun: 1;
+ u32 parity: 1;
+ u32 frame: 1;
+ u32 breakIrq: 1;
+ u32 DTR: 1;
+ u32 rxReady: 1;
+ u32 txBufEmpty: 1;
+ u32 txComplete: 1;
+ u32 unused:24;
+} BF_UART_STAT;
+
+typedef union _UART_STAT {
+ u32 ui;
+ BF_UART_STAT bf;
+} UART_STAT;
+
+/* UART BAUD_DIV register */
+typedef struct __BF_UART_BAUD_DIV {
+ u32 cnt1: 4;
+ u32 cnt0:12;
+ u32 unused:16;
+} BF_UART_BAUD_DIV;
+
+typedef union _UART_BAUD_DIV {
+ u32 ui;
+ BF_UART_BAUD_DIV bf;
+} UART_BAUD_DIV;
+
+/* UART register block */
+typedef struct __UART {
+ volatile UART_LINE_CTRL m_lineCtrl;
+ volatile UART_CTRL m_ctrl;
+ volatile UART_STAT m_stat;
+ volatile u32 m_tx;
+ volatile u32 m_rx;
+ volatile UART_BAUD_DIV m_baudDiv;
+ volatile u32 m_baudCnt;
+ volatile u32 m_baudClk;
+} UART;
+
+#define NL 0x0A
+#define CR 0x0D
+#define BSP 0x08
+#define ESC 0x1B
+#define CTRLZ 0x1A
+#define RUBOUT 0x7F
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CFG_NS16550_SERIAL
+
+#include <ns16550.h>
+#ifdef CFG_NS87308
+#include <ns87308.h>
+#endif
+
+#if defined (CONFIG_SERIAL_MULTI)
+#include <serial.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_CONS_INDEX)
+#if defined (CONFIG_SERIAL_MULTI)
+/* with CONFIG_SERIAL_MULTI we might have no console
+ * on these devices
+ */
+#else
+#error "No console index specified."
+#endif /* CONFIG_SERIAL_MULTI */
+#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
+#error "Invalid console index value."
+#endif
+
+#if CONFIG_CONS_INDEX == 1 && !defined(CFG_NS16550_COM1)
+#error "Console port 1 defined but not configured."
+#elif CONFIG_CONS_INDEX == 2 && !defined(CFG_NS16550_COM2)
+#error "Console port 2 defined but not configured."
+#elif CONFIG_CONS_INDEX == 3 && !defined(CFG_NS16550_COM3)
+#error "Console port 3 defined but not configured."
+#elif CONFIG_CONS_INDEX == 4 && !defined(CFG_NS16550_COM4)
+#error "Console port 4 defined but not configured."
+#endif
+
+/* Note: The port number specified in the functions is 1 based.
+ * the array is 0 based.
+ */
+static NS16550_t serial_ports[4] = {
+#ifdef CFG_NS16550_COM1
+ (NS16550_t)CFG_NS16550_COM1,
+#else
+ NULL,
+#endif
+#ifdef CFG_NS16550_COM2
+ (NS16550_t)CFG_NS16550_COM2,
+#else
+ NULL,
+#endif
+#ifdef CFG_NS16550_COM3
+ (NS16550_t)CFG_NS16550_COM3,
+#else
+ NULL,
+#endif
+#ifdef CFG_NS16550_COM4
+ (NS16550_t)CFG_NS16550_COM4
+#else
+ NULL
+#endif
+};
+
+#define PORT serial_ports[port-1]
+#if defined(CONFIG_CONS_INDEX)
+#define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1])
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+/* Multi serial device functions */
+#define DECLARE_ESERIAL_FUNCTIONS(port) \
+ int eserial##port##_init (void) {\
+ int clock_divisor; \
+ clock_divisor = calc_divisor(serial_ports[port-1]); \
+ NS16550_init(serial_ports[port-1], clock_divisor); \
+ return(0);}\
+ void eserial##port##_setbrg (void) {\
+ serial_setbrg_dev(port);}\
+ int eserial##port##_getc (void) {\
+ return serial_getc_dev(port);}\
+ int eserial##port##_tstc (void) {\
+ return serial_tstc_dev(port);}\
+ void eserial##port##_putc (const char c) {\
+ serial_putc_dev(port, c);}\
+ void eserial##port##_puts (const char *s) {\
+ serial_puts_dev(port, s);}
+
+/* Serial device descriptor */
+#define INIT_ESERIAL_STRUCTURE(port,name,bus) {\
+ name,\
+ bus,\
+ eserial##port##_init,\
+ eserial##port##_setbrg,\
+ eserial##port##_getc,\
+ eserial##port##_tstc,\
+ eserial##port##_putc,\
+ eserial##port##_puts, }
+
+#endif /* CONFIG_SERIAL_MULTI */
+
+static int calc_divisor (NS16550_t port)
+{
+#ifdef CONFIG_OMAP1510
+ /* If can't cleanly clock 115200 set div to 1 */
+ if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) {
+ port->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
+ return (1); /* return 1 for base divisor */
+ }
+ port->osc_12m_sel = 0; /* clear if previsouly set */
+#endif
+#ifdef CONFIG_OMAP1610
+ /* If can't cleanly clock 115200 set div to 1 */
+ if ((CFG_NS16550_CLK == 48000000) && (gd->baudrate == 115200)) {
+ return (26); /* return 26 for base divisor */
+ }
+#endif
+
+#ifdef CONFIG_APTIX
+#define MODE_X_DIV 13
+#else
+#define MODE_X_DIV 16
+#endif
+ return (CFG_NS16550_CLK / MODE_X_DIV / gd->baudrate);
+
+}
+
+#if !defined(CONFIG_SERIAL_MULTI)
+int serial_init (void)
+{
+ int clock_divisor;
+
+#ifdef CFG_NS87308
+ initialise_ns87308();
+#endif
+
+#ifdef CFG_NS16550_COM1
+ clock_divisor = calc_divisor(serial_ports[0]);
+ NS16550_init(serial_ports[0], clock_divisor);
+#endif
+#ifdef CFG_NS16550_COM2
+ clock_divisor = calc_divisor(serial_ports[1]);
+ NS16550_init(serial_ports[1], clock_divisor);
+#endif
+#ifdef CFG_NS16550_COM3
+ clock_divisor = calc_divisor(serial_ports[2]);
+ NS16550_init(serial_ports[2], clock_divisor);
+#endif
+#ifdef CFG_NS16550_COM4
+ clock_divisor = calc_divisor(serial_ports[3]);
+ NS16550_init(serial_ports[3], clock_divisor);
+#endif
+
+ return (0);
+}
+#endif
+
+void
+_serial_putc(const char c,const int port)
+{
+ if (c == '\n')
+ NS16550_putc(PORT, '\r');
+
+ NS16550_putc(PORT, c);
+}
+
+void
+_serial_putc_raw(const char c,const int port)
+{
+ NS16550_putc(PORT, c);
+}
+
+void
+_serial_puts (const char *s,const int port)
+{
+ while (*s) {
+ _serial_putc (*s++,port);
+ }
+}
+
+
+int
+_serial_getc(const int port)
+{
+ return NS16550_getc(PORT);
+}
+
+int
+_serial_tstc(const int port)
+{
+ return NS16550_tstc(PORT);
+}
+
+void
+_serial_setbrg (const int port)
+{
+ int clock_divisor;
+
+ clock_divisor = calc_divisor(PORT);
+ NS16550_reinit(PORT, clock_divisor);
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_putc_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc(c,dev_index);
+}
+#else
+void
+serial_putc(const char c)
+{
+ _serial_putc(c,CONFIG_CONS_INDEX);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_putc_raw_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc_raw(c,dev_index);
+}
+#else
+void
+serial_putc_raw(const char c)
+{
+ _serial_putc_raw(c,CONFIG_CONS_INDEX);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_puts_dev(unsigned int dev_index,const char *s)
+{
+ _serial_puts(s,dev_index);
+}
+#else
+void
+serial_puts(const char *s)
+{
+ _serial_puts(s,CONFIG_CONS_INDEX);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+#else
+int
+serial_getc(void)
+{
+ return _serial_getc(CONFIG_CONS_INDEX);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+#else
+int
+serial_tstc(void)
+{
+ return _serial_tstc(CONFIG_CONS_INDEX);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+#else
+void
+serial_setbrg(void)
+{
+ _serial_setbrg(CONFIG_CONS_INDEX);
+}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+DECLARE_ESERIAL_FUNCTIONS(1);
+struct serial_device eserial1_device =
+ INIT_ESERIAL_STRUCTURE(1,"eserial0","EUART1");
+DECLARE_ESERIAL_FUNCTIONS(2);
+struct serial_device eserial2_device =
+ INIT_ESERIAL_STRUCTURE(2,"eserial1","EUART2");
+DECLARE_ESERIAL_FUNCTIONS(3);
+struct serial_device eserial3_device =
+ INIT_ESERIAL_STRUCTURE(3,"eserial2","EUART3");
+DECLARE_ESERIAL_FUNCTIONS(4);
+struct serial_device eserial4_device =
+ INIT_ESERIAL_STRUCTURE(4,"eserial3","EUART4");
+#endif /* CONFIG_SERIAL_MULTI */
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003
+ *
+ * Pantelis Antoniou <panto@intracom.gr>
+ * Intracom S.A.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+#ifdef CONFIG_MAX3100_SERIAL
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**************************************************************/
+
+/* convienient macros */
+#define MAX3100_SPI_RXD() (MAX3100_SPI_RXD_PORT & MAX3100_SPI_RXD_BIT)
+
+#define MAX3100_SPI_TXD(x) \
+ do { \
+ if (x) \
+ MAX3100_SPI_TXD_PORT |= MAX3100_SPI_TXD_BIT; \
+ else \
+ MAX3100_SPI_TXD_PORT &= ~MAX3100_SPI_TXD_BIT; \
+ } while(0)
+
+#define MAX3100_SPI_CLK(x) \
+ do { \
+ if (x) \
+ MAX3100_SPI_CLK_PORT |= MAX3100_SPI_CLK_BIT; \
+ else \
+ MAX3100_SPI_CLK_PORT &= ~MAX3100_SPI_CLK_BIT; \
+ } while(0)
+
+#define MAX3100_SPI_CLK_TOGGLE() (MAX3100_SPI_CLK_PORT ^= MAX3100_SPI_CLK_BIT)
+
+#define MAX3100_CS(x) \
+ do { \
+ if (x) \
+ MAX3100_CS_PORT |= MAX3100_CS_BIT; \
+ else \
+ MAX3100_CS_PORT &= ~MAX3100_CS_BIT; \
+ } while(0)
+
+/**************************************************************/
+
+/* MAX3100 definitions */
+
+#define MAX3100_WC (3 << 14) /* write configuration */
+#define MAX3100_RC (1 << 14) /* read configuration */
+#define MAX3100_WD (2 << 14) /* write data */
+#define MAX3100_RD (0 << 14) /* read data */
+
+/* configuration register bits */
+#define MAX3100_FEN (1 << 13) /* FIFO enable */
+#define MAX3100_SHDN (1 << 12) /* shutdown bit */
+#define MAX3100_TM (1 << 11) /* T bit irq mask */
+#define MAX3100_RM (1 << 10) /* R bit irq mask */
+#define MAX3100_PM (1 << 9) /* P bit irq mask */
+#define MAX3100_RAM (1 << 8) /* mask for RA/FE bit */
+#define MAX3100_IR (1 << 7) /* IRDA timing mode */
+#define MAX3100_ST (1 << 6) /* transmit stop bit */
+#define MAX3100_PE (1 << 5) /* parity enable bit */
+#define MAX3100_L (1 << 4) /* Length bit */
+#define MAX3100_B_MASK (0x000F) /* baud rate bits mask */
+#define MAX3100_B(x) ((x) & 0x000F) /* baud rate select bits */
+
+/* data register bits (write) */
+#define MAX3100_TE (1 << 10) /* transmit enable bit (active low) */
+#define MAX3100_RTS (1 << 9) /* request-to-send bit (inverted ~RTS pin) */
+
+/* data register bits (read) */
+#define MAX3100_RA (1 << 10) /* receiver activity when in shutdown mode */
+#define MAX3100_FE (1 << 10) /* framing error when in normal mode */
+#define MAX3100_CTS (1 << 9) /* clear-to-send bit (inverted ~CTS pin) */
+
+/* data register bits (both directions) */
+#define MAX3100_R (1 << 15) /* receive bit */
+#define MAX3100_T (1 << 14) /* transmit bit */
+#define MAX3100_P (1 << 8) /* parity bit */
+#define MAX3100_D_MASK 0x00FF /* data bits mask */
+#define MAX3100_D(x) ((x) & 0x00FF) /* data bits */
+
+/* these definitions are valid only for fOSC = 3.6864MHz */
+#define MAX3100_B_230400 MAX3100_B(0)
+#define MAX3100_B_115200 MAX3100_B(1)
+#define MAX3100_B_57600 MAX3100_B(2)
+#define MAX3100_B_38400 MAX3100_B(9)
+#define MAX3100_B_19200 MAX3100_B(10)
+#define MAX3100_B_9600 MAX3100_B(11)
+#define MAX3100_B_4800 MAX3100_B(12)
+#define MAX3100_B_2400 MAX3100_B(13)
+#define MAX3100_B_1200 MAX3100_B(14)
+#define MAX3100_B_600 MAX3100_B(15)
+
+/**************************************************************/
+
+static inline unsigned int max3100_transfer(unsigned int val)
+{
+ unsigned int rx;
+ int b;
+
+ MAX3100_SPI_CLK(0);
+ MAX3100_CS(0);
+
+ rx = 0; b = 16;
+ while (--b >= 0) {
+ MAX3100_SPI_TXD(val & 0x8000);
+ val <<= 1;
+ MAX3100_SPI_CLK_TOGGLE();
+ udelay(1);
+ rx <<= 1;
+ if (MAX3100_SPI_RXD())
+ rx |= 1;
+ MAX3100_SPI_CLK_TOGGLE();
+ udelay(1);
+ }
+
+ MAX3100_SPI_CLK(1);
+ MAX3100_CS(1);
+
+ return rx;
+}
+
+/**************************************************************/
+
+/* must be power of 2 */
+#define RXFIFO_SZ 16
+
+static int rxfifo_cnt;
+static int rxfifo_in;
+static int rxfifo_out;
+static unsigned char rxfifo_buf[16];
+
+static void max3100_putc(int c)
+{
+ unsigned int rx;
+
+ while (((rx = max3100_transfer(MAX3100_RC)) & MAX3100_T) == 0)
+ WATCHDOG_RESET();
+
+ rx = max3100_transfer(MAX3100_WD | (c & 0xff));
+ if ((rx & MAX3100_RD) != 0 && rxfifo_cnt < RXFIFO_SZ) {
+ rxfifo_cnt++;
+ rxfifo_buf[rxfifo_in++] = rx & 0xff;
+ rxfifo_in &= RXFIFO_SZ - 1;
+ }
+}
+
+static int max3100_getc(void)
+{
+ int c;
+ unsigned int rx;
+
+ while (rxfifo_cnt == 0) {
+ rx = max3100_transfer(MAX3100_RD);
+ if ((rx & MAX3100_R) != 0) {
+ do {
+ rxfifo_cnt++;
+ rxfifo_buf[rxfifo_in++] = rx & 0xff;
+ rxfifo_in &= RXFIFO_SZ - 1;
+
+ if (rxfifo_cnt >= RXFIFO_SZ)
+ break;
+ } while (((rx = max3100_transfer(MAX3100_RD)) & MAX3100_R) != 0);
+ }
+ WATCHDOG_RESET();
+ }
+
+ rxfifo_cnt--;
+ c = rxfifo_buf[rxfifo_out++];
+ rxfifo_out &= RXFIFO_SZ - 1;
+ return c;
+}
+
+static int max3100_tstc(void)
+{
+ unsigned int rx;
+
+ if (rxfifo_cnt > 0)
+ return 1;
+
+ rx = max3100_transfer(MAX3100_RD);
+ if ((rx & MAX3100_R) == 0)
+ return 0;
+
+ do {
+ rxfifo_cnt++;
+ rxfifo_buf[rxfifo_in++] = rx & 0xff;
+ rxfifo_in &= RXFIFO_SZ - 1;
+
+ if (rxfifo_cnt >= RXFIFO_SZ)
+ break;
+ } while (((rx = max3100_transfer(MAX3100_RD)) & MAX3100_R) != 0);
+
+ return 1;
+}
+
+int serial_init(void)
+{
+ unsigned int wconf, rconf;
+ int i;
+
+ wconf = 0;
+
+ /* Set baud rate */
+ switch (gd->baudrate) {
+ case 1200:
+ wconf = MAX3100_B_1200;
+ break;
+ case 2400:
+ wconf = MAX3100_B_2400;
+ break;
+ case 4800:
+ wconf = MAX3100_B_4800;
+ break;
+ case 9600:
+ wconf = MAX3100_B_9600;
+ break;
+ case 19200:
+ wconf = MAX3100_B_19200;
+ break;
+ case 38400:
+ wconf = MAX3100_B_38400;
+ break;
+ case 57600:
+ wconf = MAX3100_B_57600;
+ break;
+ default:
+ case 115200:
+ wconf = MAX3100_B_115200;
+ break;
+ case 230400:
+ wconf = MAX3100_B_230400;
+ break;
+ }
+
+ /* try for 10ms, with a 100us gap */
+ for (i = 0; i < 10000; i += 100) {
+
+ max3100_transfer(MAX3100_WC | wconf);
+ rconf = max3100_transfer(MAX3100_RC) & 0x3fff;
+
+ if (rconf == wconf)
+ break;
+ udelay(100);
+ }
+
+ rxfifo_in = rxfifo_out = rxfifo_cnt = 0;
+
+ return (0);
+}
+
+void serial_putc(const char c)
+{
+ if (c == '\n')
+ max3100_putc('\r');
+
+ max3100_putc(c);
+}
+
+void serial_puts(const char *s)
+{
+ while (*s)
+ serial_putc (*s++);
+}
+
+int serial_getc(void)
+{
+ return max3100_getc();
+}
+
+int serial_tstc(void)
+{
+ return max3100_tstc();
+}
+
+/* XXX WTF? */
+void serial_setbrg(void)
+{
+}
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_XILINX_UARTLITE
+
+#include <asm/serial_xuartlite.h>
+
+/* FIXME: we should convert these to in32 and out32 */
+#define IO_WORD(offset) (*(volatile unsigned long *)(offset))
+#define IO_SERIAL(offset) IO_WORD(CONFIG_SERIAL_BASE + (offset))
+
+#define IO_SERIAL_RX_FIFO IO_SERIAL(XUL_RX_FIFO_OFFSET)
+#define IO_SERIAL_TX_FIFO IO_SERIAL(XUL_TX_FIFO_OFFSET)
+#define IO_SERIAL_STATUS IO_SERIAL(XUL_STATUS_REG_OFFSET)
+#define IO_SERIAL_CONTROL IO_SERIAL(XUL_CONTROL_REG_OFFSET)
+
+int serial_init(void)
+{
+ /* FIXME: Nothing for now. We should initialize fifo, etc */
+ return 0;
+}
+
+void serial_setbrg(void)
+{
+ /* FIXME: what's this for? */
+}
+
+void serial_putc(const char c)
+{
+ if (c == '\n') serial_putc('\r');
+ while (IO_SERIAL_STATUS & XUL_SR_TX_FIFO_FULL);
+ IO_SERIAL_TX_FIFO = (unsigned char) (c & 0xff);
+}
+
+void serial_puts(const char * s)
+{
+ while (*s) {
+ serial_putc(*s++);
+ }
+}
+
+int serial_getc(void)
+{
+ while (!(IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA));
+ return IO_SERIAL_RX_FIFO & 0xff;
+}
+
+int serial_tstc(void)
+{
+ return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA);
+}
+
+#endif /* CONFIG_MICROBLZE */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_TTY
+
+#include <circbuf.h>
+#include <devices.h>
+#include "usbtty.h"
+#include "usb_cdc_acm.h"
+#include "usbdescriptors.h"
+#include <config.h> /* If defined, override Linux identifiers with
+ * vendor specific ones */
+
+#if 0
+#define TTYDBG(fmt,args...)\
+ serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#else
+#define TTYDBG(fmt,args...) do{}while(0)
+#endif
+
+#if 1
+#define TTYERR(fmt,args...)\
+ serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,\
+ __LINE__,##args)
+#else
+#define TTYERR(fmt,args...) do{}while(0)
+#endif
+
+/*
+ * Defines
+ */
+#define NUM_CONFIGS 1
+#define MAX_INTERFACES 2
+#define NUM_ENDPOINTS 3
+#define ACM_TX_ENDPOINT 3
+#define ACM_RX_ENDPOINT 2
+#define GSERIAL_TX_ENDPOINT 2
+#define GSERIAL_RX_ENDPOINT 1
+#define NUM_ACM_INTERFACES 2
+#define NUM_GSERIAL_INTERFACES 1
+#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
+#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
+
+/*
+ * Buffers to hold input and output data
+ */
+#define USBTTY_BUFFER_SIZE 256
+static circbuf_t usbtty_input;
+static circbuf_t usbtty_output;
+
+
+/*
+ * Instance variables
+ */
+static device_t usbttydev;
+static struct usb_device_instance device_instance[1];
+static struct usb_bus_instance bus_instance[1];
+static struct usb_configuration_instance config_instance[NUM_CONFIGS];
+static struct usb_interface_instance interface_instance[MAX_INTERFACES];
+static struct usb_alternate_instance alternate_instance[MAX_INTERFACES];
+/* one extra for control endpoint */
+static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1];
+
+/*
+ * Global flag
+ */
+int usbtty_configured_flag = 0;
+
+/*
+ * Serial number
+ */
+static char serial_number[16];
+
+
+/*
+ * Descriptors, Strings, Local variables.
+ */
+
+/* defined and used by usbdcore_ep0.c */
+extern struct usb_string_descriptor **usb_strings;
+
+/* Indicies, References */
+static unsigned short rx_endpoint = 0;
+static unsigned short tx_endpoint = 0;
+static unsigned short interface_count = 0;
+static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
+
+/* USB Descriptor Strings */
+static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
+static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
+static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
+static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
+static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
+static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+
+/* Standard USB Data Structures */
+static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
+static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS];
+static struct usb_configuration_descriptor *configuration_descriptor = 0;
+static struct usb_device_descriptor device_descriptor = {
+ .bLength = sizeof(struct usb_device_descriptor),
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
+ .bDeviceSubClass = 0x00,
+ .bDeviceProtocol = 0x00,
+ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
+ .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID),
+ .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE),
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT,
+ .iSerialNumber = STR_SERIAL,
+ .bNumConfigurations = NUM_CONFIGS
+};
+
+
+/*
+ * Static CDC ACM specific descriptors
+ */
+
+struct acm_config_desc {
+ struct usb_configuration_descriptor configuration_desc;
+
+ /* Master Interface */
+ struct usb_interface_descriptor interface_desc;
+
+ struct usb_class_header_function_descriptor usb_class_header;
+ struct usb_class_call_management_descriptor usb_class_call_mgt;
+ struct usb_class_abstract_control_descriptor usb_class_acm;
+ struct usb_class_union_function_descriptor usb_class_union;
+ struct usb_endpoint_descriptor notification_endpoint;
+
+ /* Slave Interface */
+ struct usb_interface_descriptor data_class_interface;
+ struct usb_endpoint_descriptor
+ data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
+} __attribute__((packed));
+
+static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
+ {
+ .configuration_desc ={
+ .bLength =
+ sizeof(struct usb_configuration_descriptor),
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength =
+ cpu_to_le16(sizeof(struct acm_config_desc)),
+ .bNumInterfaces = NUM_ACM_INTERFACES,
+ .bConfigurationValue = 1,
+ .iConfiguration = STR_CONFIG,
+ .bmAttributes =
+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+ .bMaxPower = USBTTY_MAXPOWER
+ },
+ /* Interface 1 */
+ .interface_desc = {
+ .bLength = sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0x01,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
+ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
+ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
+ .iInterface = STR_CTRL_INTERFACE,
+ },
+ .usb_class_header = {
+ .bFunctionLength =
+ sizeof(struct usb_class_header_function_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_HEADER,
+ .bcdCDC = cpu_to_le16(110),
+ },
+ .usb_class_call_mgt = {
+ .bFunctionLength =
+ sizeof(struct usb_class_call_management_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_CMF,
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
+ },
+ .usb_class_acm = {
+ .bFunctionLength =
+ sizeof(struct usb_class_abstract_control_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_ACMF,
+ .bmCapabilities = 0x00,
+ },
+ .usb_class_union = {
+ .bFunctionLength =
+ sizeof(struct usb_class_union_function_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_UF,
+ .bMasterInterface = 0x00,
+ .bSlaveInterface0 = 0x01,
+ },
+ .notification_endpoint = {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize
+ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+
+ /* Interface 2 */
+ .data_class_interface = {
+ .bLength =
+ sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0x01,
+ .bAlternateSetting = 0x00,
+ .bNumEndpoints = 0x02,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_DATA,
+ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE,
+ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE,
+ .iInterface = STR_DATA_INTERFACE,
+ },
+ .data_endpoints = {
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x02 | USB_DIR_OUT,
+ .bmAttributes =
+ USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x03 | USB_DIR_IN,
+ .bmAttributes =
+ USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ },
+ },
+};
+
+static struct rs232_emu rs232_desc={
+ .dter = 115200,
+ .stop_bits = 0x00,
+ .parity = 0x00,
+ .data_bits = 0x08
+};
+
+
+/*
+ * Static Generic Serial specific data
+ */
+
+
+struct gserial_config_desc {
+
+ struct usb_configuration_descriptor configuration_desc;
+ struct usb_interface_descriptor
+ interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed));
+ struct usb_endpoint_descriptor
+ data_endpoints[NUM_ENDPOINTS] __attribute__((packed));
+
+} __attribute__((packed));
+
+static struct gserial_config_desc
+gserial_configuration_descriptors[NUM_CONFIGS] ={
+ {
+ .configuration_desc ={
+ .bLength = sizeof(struct usb_configuration_descriptor),
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength =
+ cpu_to_le16(sizeof(struct gserial_config_desc)),
+ .bNumInterfaces = NUM_GSERIAL_INTERFACES,
+ .bConfigurationValue = 1,
+ .iConfiguration = STR_CONFIG,
+ .bmAttributes =
+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+ .bMaxPower = USBTTY_MAXPOWER
+ },
+ .interface_desc = {
+ {
+ .bLength =
+ sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = NUM_ENDPOINTS,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
+ .bInterfaceSubClass =
+ COMMUNICATIONS_NO_SUBCLASS,
+ .bInterfaceProtocol =
+ COMMUNICATIONS_NO_PROTOCOL,
+ .iInterface = STR_DATA_INTERFACE
+ },
+ },
+ .data_endpoints = {
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01 | USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
+ .bInterval= 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x02 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x03 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ },
+ },
+};
+
+/*
+ * Static Function Prototypes
+ */
+
+static void usbtty_init_strings (void);
+static void usbtty_init_instances (void);
+static void usbtty_init_endpoints (void);
+static void usbtty_init_terminal_type(short type);
+static void usbtty_event_handler (struct usb_device_instance *device,
+ usb_device_event_t event, int data);
+static int usbtty_cdc_setup(struct usb_device_request *request,
+ struct urb *urb);
+static int usbtty_configured (void);
+static int write_buffer (circbuf_t * buf);
+static int fill_buffer (circbuf_t * buf);
+
+void usbtty_poll (void);
+
+/* utility function for converting char* to wide string used by USB */
+static void str2wide (char *str, u16 * wide)
+{
+ int i;
+ for (i = 0; i < strlen (str) && str[i]; i++){
+ #if defined(__LITTLE_ENDIAN)
+ wide[i] = (u16) str[i];
+ #elif defined(__BIG_ENDIAN)
+ wide[i] = ((u16)(str[i])<<8);
+ #else
+ #error "__LITTLE_ENDIAN or __BIG_ENDIAN undefined"
+ #endif
+ }
+}
+
+/*
+ * Test whether a character is in the RX buffer
+ */
+
+int usbtty_tstc (void)
+{
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
+
+ /* If no input data exists, allow more RX to be accepted */
+ if(usbtty_input.size <= 0){
+ udc_unset_nak(endpoint->endpoint_address&0x03);
+ }
+
+ usbtty_poll ();
+ return (usbtty_input.size > 0);
+}
+
+/*
+ * Read a single byte from the usb client port. Returns 1 on success, 0
+ * otherwise. When the function is succesfull, the character read is
+ * written into its argument c.
+ */
+
+int usbtty_getc (void)
+{
+ char c;
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
+
+ while (usbtty_input.size <= 0) {
+ udc_unset_nak(endpoint->endpoint_address&0x03);
+ usbtty_poll ();
+ }
+
+ buf_pop (&usbtty_input, &c, 1);
+ udc_set_nak(endpoint->endpoint_address&0x03);
+
+ return c;
+}
+
+/*
+ * Output a single byte to the usb client port.
+ */
+void usbtty_putc (const char c)
+{
+ buf_push (&usbtty_output, &c, 1);
+ /* If \n, also do \r */
+ if (c == '\n')
+ buf_push (&usbtty_output, "\r", 1);
+
+ /* Poll at end to handle new data... */
+ if ((usbtty_output.size + 2) >= usbtty_output.totalsize) {
+ usbtty_poll ();
+ }
+}
+
+/* usbtty_puts() helper function for finding the next '\n' in a string */
+static int next_nl_pos (const char *s)
+{
+ int i;
+
+ for (i = 0; s[i] != '\0'; i++) {
+ if (s[i] == '\n')
+ return i;
+ }
+ return i;
+}
+
+/*
+ * Output a string to the usb client port - implementing flow control
+ */
+
+static void __usbtty_puts (const char *str, int len)
+{
+ int maxlen = usbtty_output.totalsize;
+ int space, n;
+
+ /* break str into chunks < buffer size, if needed */
+ while (len > 0) {
+ usbtty_poll ();
+
+ space = maxlen - usbtty_output.size;
+ /* Empty buffer here, if needed, to ensure space... */
+ if (space) {
+ write_buffer (&usbtty_output);
+
+ n = MIN (space, MIN (len, maxlen));
+ buf_push (&usbtty_output, str, n);
+
+ str += n;
+ len -= n;
+ }
+ }
+}
+
+void usbtty_puts (const char *str)
+{
+ int n;
+ int len = strlen (str);
+
+ /* add '\r' for each '\n' */
+ while (len > 0) {
+ n = next_nl_pos (str);
+
+ if (str[n] == '\n') {
+ __usbtty_puts (str, n + 1);
+ __usbtty_puts ("\r", 1);
+ str += (n + 1);
+ len -= (n + 1);
+ } else {
+ /* No \n found. All done. */
+ __usbtty_puts (str, n);
+ break;
+ }
+ }
+
+ /* Poll at end to handle new data... */
+ usbtty_poll ();
+}
+
+/*
+ * Initialize the usb client port.
+ *
+ */
+int drv_usbtty_init (void)
+{
+ int rc;
+ char * sn;
+ char * tt;
+ int snlen;
+
+ /* Ger seiral number */
+ if (!(sn = getenv("serial#"))) {
+ sn = "000000000000";
+ }
+ snlen = strlen(sn);
+ if (snlen > sizeof(serial_number) - 1) {
+ printf ("Warning: serial number %s is too long (%d > %d)\n",
+ sn, snlen, sizeof(serial_number) - 1);
+ snlen = sizeof(serial_number) - 1;
+ }
+ memcpy (serial_number, sn, snlen);
+ serial_number[snlen] = '\0';
+
+ /* Decide on which type of UDC device to be.
+ */
+
+ if(!(tt = getenv("usbtty"))) {
+ tt = "generic";
+ }
+ usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
+
+ /* prepare buffers... */
+ buf_init (&usbtty_input, USBTTY_BUFFER_SIZE);
+ buf_init (&usbtty_output, USBTTY_BUFFER_SIZE);
+
+ /* Now, set up USB controller and infrastructure */
+ udc_init (); /* Basic USB initialization */
+
+ usbtty_init_strings ();
+ usbtty_init_instances ();
+
+ udc_startup_events (device_instance);/* Enable dev, init udc pointers */
+ udc_connect (); /* Enable pullup for host detection */
+
+ usbtty_init_endpoints ();
+
+ /* Device initialization */
+ memset (&usbttydev, 0, sizeof (usbttydev));
+
+ strcpy (usbttydev.name, "usbtty");
+ usbttydev.ext = 0; /* No extensions */
+ usbttydev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_OUTPUT;
+ usbttydev.tstc = usbtty_tstc; /* 'tstc' function */
+ usbttydev.getc = usbtty_getc; /* 'getc' function */
+ usbttydev.putc = usbtty_putc; /* 'putc' function */
+ usbttydev.puts = usbtty_puts; /* 'puts' function */
+
+ rc = device_register (&usbttydev);
+
+ return (rc == 0) ? 1 : rc;
+}
+
+static void usbtty_init_strings (void)
+{
+ struct usb_string_descriptor *string;
+
+ usbtty_string_table[STR_LANG] =
+ (struct usb_string_descriptor*)wstrLang;
+
+ string = (struct usb_string_descriptor *) wstrManufacturer;
+ string->bLength = sizeof(wstrManufacturer);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_MANUFACTURER, string->wData);
+ usbtty_string_table[STR_MANUFACTURER]=string;
+
+
+ string = (struct usb_string_descriptor *) wstrProduct;
+ string->bLength = sizeof(wstrProduct);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData);
+ usbtty_string_table[STR_PRODUCT]=string;
+
+
+ string = (struct usb_string_descriptor *) wstrSerial;
+ string->bLength = sizeof(serial_number);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (serial_number, string->wData);
+ usbtty_string_table[STR_SERIAL]=string;
+
+
+ string = (struct usb_string_descriptor *) wstrConfiguration;
+ string->bLength = sizeof(wstrConfiguration);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
+ usbtty_string_table[STR_CONFIG]=string;
+
+
+ string = (struct usb_string_descriptor *) wstrDataInterface;
+ string->bLength = sizeof(wstrDataInterface);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
+ usbtty_string_table[STR_DATA_INTERFACE]=string;
+
+ string = (struct usb_string_descriptor *) wstrCtrlInterface;
+ string->bLength = sizeof(wstrCtrlInterface);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
+ usbtty_string_table[STR_CTRL_INTERFACE]=string;
+
+ /* Now, initialize the string table for ep0 handling */
+ usb_strings = usbtty_string_table;
+}
+
+static void usbtty_init_instances (void)
+{
+ int i;
+
+ /* initialize device instance */
+ memset (device_instance, 0, sizeof (struct usb_device_instance));
+ device_instance->device_state = STATE_INIT;
+ device_instance->device_descriptor = &device_descriptor;
+ device_instance->event = usbtty_event_handler;
+ device_instance->cdc_recv_setup = usbtty_cdc_setup;
+ device_instance->bus = bus_instance;
+ device_instance->configurations = NUM_CONFIGS;
+ device_instance->configuration_instance_array = config_instance;
+
+ /* initialize bus instance */
+ memset (bus_instance, 0, sizeof (struct usb_bus_instance));
+ bus_instance->device = device_instance;
+ bus_instance->endpoint_array = endpoint_instance;
+ bus_instance->max_endpoints = 1;
+ bus_instance->maxpacketsize = 64;
+ bus_instance->serial_number_str = serial_number;
+
+ /* configuration instance */
+ memset (config_instance, 0,
+ sizeof (struct usb_configuration_instance));
+ config_instance->interfaces = interface_count;
+ config_instance->configuration_descriptor = configuration_descriptor;
+ config_instance->interface_instance_array = interface_instance;
+
+ /* interface instance */
+ memset (interface_instance, 0,
+ sizeof (struct usb_interface_instance));
+ interface_instance->alternates = 1;
+ interface_instance->alternates_instance_array = alternate_instance;
+
+ /* alternates instance */
+ memset (alternate_instance, 0,
+ sizeof (struct usb_alternate_instance));
+ alternate_instance->interface_descriptor = interface_descriptors;
+ alternate_instance->endpoints = NUM_ENDPOINTS;
+ alternate_instance->endpoints_descriptor_array = ep_descriptor_ptrs;
+
+ /* endpoint instances */
+ memset (&endpoint_instance[0], 0,
+ sizeof (struct usb_endpoint_instance));
+ endpoint_instance[0].endpoint_address = 0;
+ endpoint_instance[0].rcv_packetSize = EP0_MAX_PACKET_SIZE;
+ endpoint_instance[0].rcv_attributes = USB_ENDPOINT_XFER_CONTROL;
+ endpoint_instance[0].tx_packetSize = EP0_MAX_PACKET_SIZE;
+ endpoint_instance[0].tx_attributes = USB_ENDPOINT_XFER_CONTROL;
+ udc_setup_ep (device_instance, 0, &endpoint_instance[0]);
+
+ for (i = 1; i <= NUM_ENDPOINTS; i++) {
+ memset (&endpoint_instance[i], 0,
+ sizeof (struct usb_endpoint_instance));
+
+ endpoint_instance[i].endpoint_address =
+ ep_descriptor_ptrs[i - 1]->bEndpointAddress;
+
+ endpoint_instance[i].rcv_attributes =
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
+
+ endpoint_instance[i].rcv_packetSize =
+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
+ endpoint_instance[i].tx_attributes =
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
+
+ endpoint_instance[i].tx_packetSize =
+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
+ endpoint_instance[i].tx_attributes =
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
+
+ urb_link_init (&endpoint_instance[i].rcv);
+ urb_link_init (&endpoint_instance[i].rdy);
+ urb_link_init (&endpoint_instance[i].tx);
+ urb_link_init (&endpoint_instance[i].done);
+
+ if (endpoint_instance[i].endpoint_address & USB_DIR_IN)
+ endpoint_instance[i].tx_urb =
+ usbd_alloc_urb (device_instance,
+ &endpoint_instance[i]);
+ else
+ endpoint_instance[i].rcv_urb =
+ usbd_alloc_urb (device_instance,
+ &endpoint_instance[i]);
+ }
+}
+
+static void usbtty_init_endpoints (void)
+{
+ int i;
+
+ bus_instance->max_endpoints = NUM_ENDPOINTS + 1;
+ for (i = 1; i <= NUM_ENDPOINTS; i++) {
+ udc_setup_ep (device_instance, i, &endpoint_instance[i]);
+ }
+}
+
+/* usbtty_init_terminal_type
+ *
+ * Do some late binding for our device type.
+ */
+static void usbtty_init_terminal_type(short type)
+{
+ switch(type){
+ /* CDC ACM */
+ case 0:
+ /* Assign endpoint descriptors */
+ ep_descriptor_ptrs[0] =
+ &acm_configuration_descriptors[0].notification_endpoint;
+ ep_descriptor_ptrs[1] =
+ &acm_configuration_descriptors[0].data_endpoints[0];
+ ep_descriptor_ptrs[2] =
+ &acm_configuration_descriptors[0].data_endpoints[1];
+
+ /* Enumerate Device Descriptor */
+ device_descriptor.bDeviceClass =
+ COMMUNICATIONS_DEVICE_CLASS;
+ device_descriptor.idProduct =
+ cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
+
+ /* Assign endpoint indices */
+ tx_endpoint = ACM_TX_ENDPOINT;
+ rx_endpoint = ACM_RX_ENDPOINT;
+
+ /* Configuration Descriptor */
+ configuration_descriptor =
+ (struct usb_configuration_descriptor*)
+ &acm_configuration_descriptors;
+
+ /* Interface count */
+ interface_count = NUM_ACM_INTERFACES;
+ break;
+
+ /* BULK IN/OUT & Default */
+ case 1:
+ default:
+ /* Assign endpoint descriptors */
+ ep_descriptor_ptrs[0] =
+ &gserial_configuration_descriptors[0].data_endpoints[0];
+ ep_descriptor_ptrs[1] =
+ &gserial_configuration_descriptors[0].data_endpoints[1];
+ ep_descriptor_ptrs[2] =
+ &gserial_configuration_descriptors[0].data_endpoints[2];
+
+ /* Enumerate Device Descriptor */
+ device_descriptor.bDeviceClass = 0xFF;
+ device_descriptor.idProduct =
+ cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
+
+ /* Assign endpoint indices */
+ tx_endpoint = GSERIAL_TX_ENDPOINT;
+ rx_endpoint = GSERIAL_RX_ENDPOINT;
+
+ /* Configuration Descriptor */
+ configuration_descriptor =
+ (struct usb_configuration_descriptor*)
+ &gserial_configuration_descriptors;
+
+ /* Interface count */
+ interface_count = NUM_GSERIAL_INTERFACES;
+ break;
+ }
+}
+
+/******************************************************************************/
+
+static struct urb *next_urb (struct usb_device_instance *device,
+ struct usb_endpoint_instance *endpoint)
+{
+ struct urb *current_urb = NULL;
+ int space;
+
+ /* If there's a queue, then we should add to the last urb */
+ if (!endpoint->tx_queue) {
+ current_urb = endpoint->tx_urb;
+ } else {
+ /* Last urb from tx chain */
+ current_urb =
+ p2surround (struct urb, link, endpoint->tx.prev);
+ }
+
+ /* Make sure this one has enough room */
+ space = current_urb->buffer_length - current_urb->actual_length;
+ if (space > 0) {
+ return current_urb;
+ } else { /* No space here */
+ /* First look at done list */
+ current_urb = first_urb_detached (&endpoint->done);
+ if (!current_urb) {
+ current_urb = usbd_alloc_urb (device, endpoint);
+ }
+
+ urb_append (&endpoint->tx, current_urb);
+ endpoint->tx_queue++;
+ }
+ return current_urb;
+}
+
+static int write_buffer (circbuf_t * buf)
+{
+ if (!usbtty_configured ()) {
+ return 0;
+ }
+
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[tx_endpoint];
+ struct urb *current_urb = NULL;
+
+ current_urb = next_urb (device_instance, endpoint);
+ /* TX data still exists - send it now
+ */
+ if(endpoint->sent < current_urb->actual_length){
+ if(udc_endpoint_write (endpoint)){
+ /* Write pre-empted by RX */
+ return -1;
+ }
+ }
+
+ if (buf->size) {
+ char *dest;
+
+ int space_avail;
+ int popnum, popped;
+ int total = 0;
+
+ /* Break buffer into urb sized pieces,
+ * and link each to the endpoint
+ */
+ while (buf->size > 0) {
+
+ if (!current_urb) {
+ TTYERR ("current_urb is NULL, buf->size %d\n",
+ buf->size);
+ return total;
+ }
+
+ dest = (char*)current_urb->buffer +
+ current_urb->actual_length;
+
+ space_avail =
+ current_urb->buffer_length -
+ current_urb->actual_length;
+ popnum = MIN (space_avail, buf->size);
+ if (popnum == 0)
+ break;
+
+ popped = buf_pop (buf, dest, popnum);
+ if (popped == 0)
+ break;
+ current_urb->actual_length += popped;
+ total += popped;
+
+ /* If endpoint->last == 0, then transfers have
+ * not started on this endpoint
+ */
+ if (endpoint->last == 0) {
+ if(udc_endpoint_write (endpoint)){
+ /* Write pre-empted by RX */
+ return -1;
+ }
+ }
+
+ }/* end while */
+ return total;
+ }
+
+ return 0;
+}
+
+static int fill_buffer (circbuf_t * buf)
+{
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
+
+ if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
+ unsigned int nb = 0;
+ char *src = (char *) endpoint->rcv_urb->buffer;
+ unsigned int rx_avail = buf->totalsize - buf->size;
+
+ if(rx_avail >= endpoint->rcv_urb->actual_length){
+
+ nb = endpoint->rcv_urb->actual_length;
+ buf_push (buf, src, nb);
+ endpoint->rcv_urb->actual_length = 0;
+
+ }
+ return nb;
+ }
+ return 0;
+}
+
+static int usbtty_configured (void)
+{
+ return usbtty_configured_flag;
+}
+
+/******************************************************************************/
+
+static void usbtty_event_handler (struct usb_device_instance *device,
+ usb_device_event_t event, int data)
+{
+ switch (event) {
+ case DEVICE_RESET:
+ case DEVICE_BUS_INACTIVE:
+ usbtty_configured_flag = 0;
+ break;
+ case DEVICE_CONFIGURED:
+ usbtty_configured_flag = 1;
+ break;
+
+ case DEVICE_ADDRESS_ASSIGNED:
+ usbtty_init_endpoints ();
+
+ default:
+ break;
+ }
+}
+
+/******************************************************************************/
+
+int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
+{
+ switch (request->bRequest){
+
+ case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */
+ break;
+ case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */
+ break;
+ case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits
+ * per character */
+ break;
+ case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */
+ break;
+ case ACM_GET_LINE_ENCODING : /* request DTE rate,
+ * stop/parity bits */
+ memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc));
+ urb->actual_length = sizeof(rs232_desc);
+
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/******************************************************************************/
+
+/*
+ * Since interrupt handling has not yet been implemented, we use this function
+ * to handle polling. This is called by the tstc,getc,putc,puts routines to
+ * update the USB state.
+ */
+void usbtty_poll (void)
+{
+ /* New interrupts? */
+ udc_irq();
+
+ /* Write any output data to host buffer
+ * (do this before checking interrupts to avoid missing one)
+ */
+ if (usbtty_configured ()) {
+ write_buffer (&usbtty_output);
+ }
+
+ /* New interrupts? */
+ udc_irq();
+
+ /* Check for new data from host..
+ * (do this after checking interrupts to get latest data)
+ */
+ if (usbtty_configured ()) {
+ fill_buffer (&usbtty_input);
+ }
+
+ /* New interrupts? */
+ udc_irq();
+
+}
+
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Gerry Hamel, geh@ti.com, Texas Instruments
+ *
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __USB_TTY_H__
+#define __USB_TTY_H__
+
+#include "usbdcore.h"
+#if defined(CONFIG_PPC)
+#include "usbdcore_mpc8xx.h"
+#elif defined(CONFIG_ARM)
+#include "usbdcore_omap1510.h"
+#endif
+
+#include <version_autogenerated.h>
+
+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
+
+#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
+#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
+
+
+#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
+
+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
+#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
+#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
+
+#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
+
+#define USBTTY_BCD_DEVICE 0x00
+#define USBTTY_MAXPOWER 0x00
+
+#define STR_LANG 0x00
+#define STR_MANUFACTURER 0x01
+#define STR_PRODUCT 0x02
+#define STR_SERIAL 0x03
+#define STR_CONFIG 0x04
+#define STR_DATA_INTERFACE 0x05
+#define STR_CTRL_INTERFACE 0x06
+#define STR_COUNT 0x07
+
+#endif
+++ /dev/null
-/*
- * (C) Copyright 2003
- *
- * Pantelis Antoniou <panto@intracom.gr>
- * Intracom S.A.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-#ifdef CONFIG_MAX3100_SERIAL
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/**************************************************************/
-
-/* convienient macros */
-#define MAX3100_SPI_RXD() (MAX3100_SPI_RXD_PORT & MAX3100_SPI_RXD_BIT)
-
-#define MAX3100_SPI_TXD(x) \
- do { \
- if (x) \
- MAX3100_SPI_TXD_PORT |= MAX3100_SPI_TXD_BIT; \
- else \
- MAX3100_SPI_TXD_PORT &= ~MAX3100_SPI_TXD_BIT; \
- } while(0)
-
-#define MAX3100_SPI_CLK(x) \
- do { \
- if (x) \
- MAX3100_SPI_CLK_PORT |= MAX3100_SPI_CLK_BIT; \
- else \
- MAX3100_SPI_CLK_PORT &= ~MAX3100_SPI_CLK_BIT; \
- } while(0)
-
-#define MAX3100_SPI_CLK_TOGGLE() (MAX3100_SPI_CLK_PORT ^= MAX3100_SPI_CLK_BIT)
-
-#define MAX3100_CS(x) \
- do { \
- if (x) \
- MAX3100_CS_PORT |= MAX3100_CS_BIT; \
- else \
- MAX3100_CS_PORT &= ~MAX3100_CS_BIT; \
- } while(0)
-
-/**************************************************************/
-
-/* MAX3100 definitions */
-
-#define MAX3100_WC (3 << 14) /* write configuration */
-#define MAX3100_RC (1 << 14) /* read configuration */
-#define MAX3100_WD (2 << 14) /* write data */
-#define MAX3100_RD (0 << 14) /* read data */
-
-/* configuration register bits */
-#define MAX3100_FEN (1 << 13) /* FIFO enable */
-#define MAX3100_SHDN (1 << 12) /* shutdown bit */
-#define MAX3100_TM (1 << 11) /* T bit irq mask */
-#define MAX3100_RM (1 << 10) /* R bit irq mask */
-#define MAX3100_PM (1 << 9) /* P bit irq mask */
-#define MAX3100_RAM (1 << 8) /* mask for RA/FE bit */
-#define MAX3100_IR (1 << 7) /* IRDA timing mode */
-#define MAX3100_ST (1 << 6) /* transmit stop bit */
-#define MAX3100_PE (1 << 5) /* parity enable bit */
-#define MAX3100_L (1 << 4) /* Length bit */
-#define MAX3100_B_MASK (0x000F) /* baud rate bits mask */
-#define MAX3100_B(x) ((x) & 0x000F) /* baud rate select bits */
-
-/* data register bits (write) */
-#define MAX3100_TE (1 << 10) /* transmit enable bit (active low) */
-#define MAX3100_RTS (1 << 9) /* request-to-send bit (inverted ~RTS pin) */
-
-/* data register bits (read) */
-#define MAX3100_RA (1 << 10) /* receiver activity when in shutdown mode */
-#define MAX3100_FE (1 << 10) /* framing error when in normal mode */
-#define MAX3100_CTS (1 << 9) /* clear-to-send bit (inverted ~CTS pin) */
-
-/* data register bits (both directions) */
-#define MAX3100_R (1 << 15) /* receive bit */
-#define MAX3100_T (1 << 14) /* transmit bit */
-#define MAX3100_P (1 << 8) /* parity bit */
-#define MAX3100_D_MASK 0x00FF /* data bits mask */
-#define MAX3100_D(x) ((x) & 0x00FF) /* data bits */
-
-/* these definitions are valid only for fOSC = 3.6864MHz */
-#define MAX3100_B_230400 MAX3100_B(0)
-#define MAX3100_B_115200 MAX3100_B(1)
-#define MAX3100_B_57600 MAX3100_B(2)
-#define MAX3100_B_38400 MAX3100_B(9)
-#define MAX3100_B_19200 MAX3100_B(10)
-#define MAX3100_B_9600 MAX3100_B(11)
-#define MAX3100_B_4800 MAX3100_B(12)
-#define MAX3100_B_2400 MAX3100_B(13)
-#define MAX3100_B_1200 MAX3100_B(14)
-#define MAX3100_B_600 MAX3100_B(15)
-
-/**************************************************************/
-
-static inline unsigned int max3100_transfer(unsigned int val)
-{
- unsigned int rx;
- int b;
-
- MAX3100_SPI_CLK(0);
- MAX3100_CS(0);
-
- rx = 0; b = 16;
- while (--b >= 0) {
- MAX3100_SPI_TXD(val & 0x8000);
- val <<= 1;
- MAX3100_SPI_CLK_TOGGLE();
- udelay(1);
- rx <<= 1;
- if (MAX3100_SPI_RXD())
- rx |= 1;
- MAX3100_SPI_CLK_TOGGLE();
- udelay(1);
- }
-
- MAX3100_SPI_CLK(1);
- MAX3100_CS(1);
-
- return rx;
-}
-
-/**************************************************************/
-
-/* must be power of 2 */
-#define RXFIFO_SZ 16
-
-static int rxfifo_cnt;
-static int rxfifo_in;
-static int rxfifo_out;
-static unsigned char rxfifo_buf[16];
-
-static void max3100_putc(int c)
-{
- unsigned int rx;
-
- while (((rx = max3100_transfer(MAX3100_RC)) & MAX3100_T) == 0)
- WATCHDOG_RESET();
-
- rx = max3100_transfer(MAX3100_WD | (c & 0xff));
- if ((rx & MAX3100_RD) != 0 && rxfifo_cnt < RXFIFO_SZ) {
- rxfifo_cnt++;
- rxfifo_buf[rxfifo_in++] = rx & 0xff;
- rxfifo_in &= RXFIFO_SZ - 1;
- }
-}
-
-static int max3100_getc(void)
-{
- int c;
- unsigned int rx;
-
- while (rxfifo_cnt == 0) {
- rx = max3100_transfer(MAX3100_RD);
- if ((rx & MAX3100_R) != 0) {
- do {
- rxfifo_cnt++;
- rxfifo_buf[rxfifo_in++] = rx & 0xff;
- rxfifo_in &= RXFIFO_SZ - 1;
-
- if (rxfifo_cnt >= RXFIFO_SZ)
- break;
- } while (((rx = max3100_transfer(MAX3100_RD)) & MAX3100_R) != 0);
- }
- WATCHDOG_RESET();
- }
-
- rxfifo_cnt--;
- c = rxfifo_buf[rxfifo_out++];
- rxfifo_out &= RXFIFO_SZ - 1;
- return c;
-}
-
-static int max3100_tstc(void)
-{
- unsigned int rx;
-
- if (rxfifo_cnt > 0)
- return 1;
-
- rx = max3100_transfer(MAX3100_RD);
- if ((rx & MAX3100_R) == 0)
- return 0;
-
- do {
- rxfifo_cnt++;
- rxfifo_buf[rxfifo_in++] = rx & 0xff;
- rxfifo_in &= RXFIFO_SZ - 1;
-
- if (rxfifo_cnt >= RXFIFO_SZ)
- break;
- } while (((rx = max3100_transfer(MAX3100_RD)) & MAX3100_R) != 0);
-
- return 1;
-}
-
-int serial_init(void)
-{
- unsigned int wconf, rconf;
- int i;
-
- wconf = 0;
-
- /* Set baud rate */
- switch (gd->baudrate) {
- case 1200:
- wconf = MAX3100_B_1200;
- break;
- case 2400:
- wconf = MAX3100_B_2400;
- break;
- case 4800:
- wconf = MAX3100_B_4800;
- break;
- case 9600:
- wconf = MAX3100_B_9600;
- break;
- case 19200:
- wconf = MAX3100_B_19200;
- break;
- case 38400:
- wconf = MAX3100_B_38400;
- break;
- case 57600:
- wconf = MAX3100_B_57600;
- break;
- default:
- case 115200:
- wconf = MAX3100_B_115200;
- break;
- case 230400:
- wconf = MAX3100_B_230400;
- break;
- }
-
- /* try for 10ms, with a 100us gap */
- for (i = 0; i < 10000; i += 100) {
-
- max3100_transfer(MAX3100_WC | wconf);
- rconf = max3100_transfer(MAX3100_RC) & 0x3fff;
-
- if (rconf == wconf)
- break;
- udelay(100);
- }
-
- rxfifo_in = rxfifo_out = rxfifo_cnt = 0;
-
- return (0);
-}
-
-void serial_putc(const char c)
-{
- if (c == '\n')
- max3100_putc('\r');
-
- max3100_putc(c);
-}
-
-void serial_puts(const char *s)
-{
- while (*s)
- serial_putc (*s++);
-}
-
-int serial_getc(void)
-{
- return max3100_getc();
-}
-
-int serial_tstc(void)
-{
- return max3100_tstc();
-}
-
-/* XXX WTF? */
-void serial_setbrg(void)
-{
-}
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2004 Atmark Techno, Inc.
- *
- * Yasushi SHOJI <yashi@atmark-techno.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#ifdef CONFIG_XILINX_UARTLITE
-
-#include <asm/serial_xuartlite.h>
-
-/* FIXME: we should convert these to in32 and out32 */
-#define IO_WORD(offset) (*(volatile unsigned long *)(offset))
-#define IO_SERIAL(offset) IO_WORD(CONFIG_SERIAL_BASE + (offset))
-
-#define IO_SERIAL_RX_FIFO IO_SERIAL(XUL_RX_FIFO_OFFSET)
-#define IO_SERIAL_TX_FIFO IO_SERIAL(XUL_TX_FIFO_OFFSET)
-#define IO_SERIAL_STATUS IO_SERIAL(XUL_STATUS_REG_OFFSET)
-#define IO_SERIAL_CONTROL IO_SERIAL(XUL_CONTROL_REG_OFFSET)
-
-int serial_init(void)
-{
- /* FIXME: Nothing for now. We should initialize fifo, etc */
- return 0;
-}
-
-void serial_setbrg(void)
-{
- /* FIXME: what's this for? */
-}
-
-void serial_putc(const char c)
-{
- if (c == '\n') serial_putc('\r');
- while (IO_SERIAL_STATUS & XUL_SR_TX_FIFO_FULL);
- IO_SERIAL_TX_FIFO = (unsigned char) (c & 0xff);
-}
-
-void serial_puts(const char * s)
-{
- while (*s) {
- serial_putc(*s++);
- }
-}
-
-int serial_getc(void)
-{
- while (!(IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA));
- return IO_SERIAL_RX_FIFO & 0xff;
-}
-
-int serial_tstc(void)
-{
- return (IO_SERIAL_STATUS & XUL_SR_RX_FIFO_VALID_DATA);
-}
-
-#endif /* CONFIG_MICROBLZE */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * (C) Copyright 2006
- * Bryan O'Donoghue, bodonoghue@codehermit.ie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_TTY
-
-#include <circbuf.h>
-#include <devices.h>
-#include "usbtty.h"
-#include "usb_cdc_acm.h"
-#include "usbdescriptors.h"
-#include <config.h> /* If defined, override Linux identifiers with
- * vendor specific ones */
-
-#if 0
-#define TTYDBG(fmt,args...)\
- serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
-#else
-#define TTYDBG(fmt,args...) do{}while(0)
-#endif
-
-#if 1
-#define TTYERR(fmt,args...)\
- serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,\
- __LINE__,##args)
-#else
-#define TTYERR(fmt,args...) do{}while(0)
-#endif
-
-/*
- * Defines
- */
-#define NUM_CONFIGS 1
-#define MAX_INTERFACES 2
-#define NUM_ENDPOINTS 3
-#define ACM_TX_ENDPOINT 3
-#define ACM_RX_ENDPOINT 2
-#define GSERIAL_TX_ENDPOINT 2
-#define GSERIAL_RX_ENDPOINT 1
-#define NUM_ACM_INTERFACES 2
-#define NUM_GSERIAL_INTERFACES 1
-#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
-#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
-
-/*
- * Buffers to hold input and output data
- */
-#define USBTTY_BUFFER_SIZE 256
-static circbuf_t usbtty_input;
-static circbuf_t usbtty_output;
-
-
-/*
- * Instance variables
- */
-static device_t usbttydev;
-static struct usb_device_instance device_instance[1];
-static struct usb_bus_instance bus_instance[1];
-static struct usb_configuration_instance config_instance[NUM_CONFIGS];
-static struct usb_interface_instance interface_instance[MAX_INTERFACES];
-static struct usb_alternate_instance alternate_instance[MAX_INTERFACES];
-/* one extra for control endpoint */
-static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1];
-
-/*
- * Global flag
- */
-int usbtty_configured_flag = 0;
-
-/*
- * Serial number
- */
-static char serial_number[16];
-
-
-/*
- * Descriptors, Strings, Local variables.
- */
-
-/* defined and used by usbdcore_ep0.c */
-extern struct usb_string_descriptor **usb_strings;
-
-/* Indicies, References */
-static unsigned short rx_endpoint = 0;
-static unsigned short tx_endpoint = 0;
-static unsigned short interface_count = 0;
-static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
-
-/* USB Descriptor Strings */
-static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
-static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
-static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
-static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
-static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
-static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
-static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
-
-/* Standard USB Data Structures */
-static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
-static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS];
-static struct usb_configuration_descriptor *configuration_descriptor = 0;
-static struct usb_device_descriptor device_descriptor = {
- .bLength = sizeof(struct usb_device_descriptor),
- .bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
- .bDeviceSubClass = 0x00,
- .bDeviceProtocol = 0x00,
- .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
- .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID),
- .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE),
- .iManufacturer = STR_MANUFACTURER,
- .iProduct = STR_PRODUCT,
- .iSerialNumber = STR_SERIAL,
- .bNumConfigurations = NUM_CONFIGS
-};
-
-
-/*
- * Static CDC ACM specific descriptors
- */
-
-struct acm_config_desc {
- struct usb_configuration_descriptor configuration_desc;
-
- /* Master Interface */
- struct usb_interface_descriptor interface_desc;
-
- struct usb_class_header_function_descriptor usb_class_header;
- struct usb_class_call_management_descriptor usb_class_call_mgt;
- struct usb_class_abstract_control_descriptor usb_class_acm;
- struct usb_class_union_function_descriptor usb_class_union;
- struct usb_endpoint_descriptor notification_endpoint;
-
- /* Slave Interface */
- struct usb_interface_descriptor data_class_interface;
- struct usb_endpoint_descriptor
- data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
-} __attribute__((packed));
-
-static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
- {
- .configuration_desc ={
- .bLength =
- sizeof(struct usb_configuration_descriptor),
- .bDescriptorType = USB_DT_CONFIG,
- .wTotalLength =
- cpu_to_le16(sizeof(struct acm_config_desc)),
- .bNumInterfaces = NUM_ACM_INTERFACES,
- .bConfigurationValue = 1,
- .iConfiguration = STR_CONFIG,
- .bmAttributes =
- BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
- .bMaxPower = USBTTY_MAXPOWER
- },
- /* Interface 1 */
- .interface_desc = {
- .bLength = sizeof(struct usb_interface_descriptor),
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0,
- .bAlternateSetting = 0,
- .bNumEndpoints = 0x01,
- .bInterfaceClass =
- COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
- .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
- .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
- .iInterface = STR_CTRL_INTERFACE,
- },
- .usb_class_header = {
- .bFunctionLength =
- sizeof(struct usb_class_header_function_descriptor),
- .bDescriptorType = CS_INTERFACE,
- .bDescriptorSubtype = USB_ST_HEADER,
- .bcdCDC = cpu_to_le16(110),
- },
- .usb_class_call_mgt = {
- .bFunctionLength =
- sizeof(struct usb_class_call_management_descriptor),
- .bDescriptorType = CS_INTERFACE,
- .bDescriptorSubtype = USB_ST_CMF,
- .bmCapabilities = 0x00,
- .bDataInterface = 0x01,
- },
- .usb_class_acm = {
- .bFunctionLength =
- sizeof(struct usb_class_abstract_control_descriptor),
- .bDescriptorType = CS_INTERFACE,
- .bDescriptorSubtype = USB_ST_ACMF,
- .bmCapabilities = 0x00,
- },
- .usb_class_union = {
- .bFunctionLength =
- sizeof(struct usb_class_union_function_descriptor),
- .bDescriptorType = CS_INTERFACE,
- .bDescriptorSubtype = USB_ST_UF,
- .bMasterInterface = 0x00,
- .bSlaveInterface0 = 0x01,
- },
- .notification_endpoint = {
- .bLength =
- sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x01 | USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize
- = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
- .bInterval = 0xFF,
- },
-
- /* Interface 2 */
- .data_class_interface = {
- .bLength =
- sizeof(struct usb_interface_descriptor),
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0x01,
- .bAlternateSetting = 0x00,
- .bNumEndpoints = 0x02,
- .bInterfaceClass =
- COMMUNICATIONS_INTERFACE_CLASS_DATA,
- .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE,
- .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE,
- .iInterface = STR_DATA_INTERFACE,
- },
- .data_endpoints = {
- {
- .bLength =
- sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x02 | USB_DIR_OUT,
- .bmAttributes =
- USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
- .bInterval = 0xFF,
- },
- {
- .bLength =
- sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x03 | USB_DIR_IN,
- .bmAttributes =
- USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
- .bInterval = 0xFF,
- },
- },
- },
-};
-
-static struct rs232_emu rs232_desc={
- .dter = 115200,
- .stop_bits = 0x00,
- .parity = 0x00,
- .data_bits = 0x08
-};
-
-
-/*
- * Static Generic Serial specific data
- */
-
-
-struct gserial_config_desc {
-
- struct usb_configuration_descriptor configuration_desc;
- struct usb_interface_descriptor
- interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed));
- struct usb_endpoint_descriptor
- data_endpoints[NUM_ENDPOINTS] __attribute__((packed));
-
-} __attribute__((packed));
-
-static struct gserial_config_desc
-gserial_configuration_descriptors[NUM_CONFIGS] ={
- {
- .configuration_desc ={
- .bLength = sizeof(struct usb_configuration_descriptor),
- .bDescriptorType = USB_DT_CONFIG,
- .wTotalLength =
- cpu_to_le16(sizeof(struct gserial_config_desc)),
- .bNumInterfaces = NUM_GSERIAL_INTERFACES,
- .bConfigurationValue = 1,
- .iConfiguration = STR_CONFIG,
- .bmAttributes =
- BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
- .bMaxPower = USBTTY_MAXPOWER
- },
- .interface_desc = {
- {
- .bLength =
- sizeof(struct usb_interface_descriptor),
- .bDescriptorType = USB_DT_INTERFACE,
- .bInterfaceNumber = 0,
- .bAlternateSetting = 0,
- .bNumEndpoints = NUM_ENDPOINTS,
- .bInterfaceClass =
- COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
- .bInterfaceSubClass =
- COMMUNICATIONS_NO_SUBCLASS,
- .bInterfaceProtocol =
- COMMUNICATIONS_NO_PROTOCOL,
- .iInterface = STR_DATA_INTERFACE
- },
- },
- .data_endpoints = {
- {
- .bLength =
- sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x01 | USB_DIR_OUT,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
- .bInterval= 0xFF,
- },
- {
- .bLength =
- sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x02 | USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_BULK,
- .wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
- .bInterval = 0xFF,
- },
- {
- .bLength =
- sizeof(struct usb_endpoint_descriptor),
- .bDescriptorType = USB_DT_ENDPOINT,
- .bEndpointAddress = 0x03 | USB_DIR_IN,
- .bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize =
- cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
- .bInterval = 0xFF,
- },
- },
- },
-};
-
-/*
- * Static Function Prototypes
- */
-
-static void usbtty_init_strings (void);
-static void usbtty_init_instances (void);
-static void usbtty_init_endpoints (void);
-static void usbtty_init_terminal_type(short type);
-static void usbtty_event_handler (struct usb_device_instance *device,
- usb_device_event_t event, int data);
-static int usbtty_cdc_setup(struct usb_device_request *request,
- struct urb *urb);
-static int usbtty_configured (void);
-static int write_buffer (circbuf_t * buf);
-static int fill_buffer (circbuf_t * buf);
-
-void usbtty_poll (void);
-
-/* utility function for converting char* to wide string used by USB */
-static void str2wide (char *str, u16 * wide)
-{
- int i;
- for (i = 0; i < strlen (str) && str[i]; i++){
- #if defined(__LITTLE_ENDIAN)
- wide[i] = (u16) str[i];
- #elif defined(__BIG_ENDIAN)
- wide[i] = ((u16)(str[i])<<8);
- #else
- #error "__LITTLE_ENDIAN or __BIG_ENDIAN undefined"
- #endif
- }
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-
-int usbtty_tstc (void)
-{
- struct usb_endpoint_instance *endpoint =
- &endpoint_instance[rx_endpoint];
-
- /* If no input data exists, allow more RX to be accepted */
- if(usbtty_input.size <= 0){
- udc_unset_nak(endpoint->endpoint_address&0x03);
- }
-
- usbtty_poll ();
- return (usbtty_input.size > 0);
-}
-
-/*
- * Read a single byte from the usb client port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-
-int usbtty_getc (void)
-{
- char c;
- struct usb_endpoint_instance *endpoint =
- &endpoint_instance[rx_endpoint];
-
- while (usbtty_input.size <= 0) {
- udc_unset_nak(endpoint->endpoint_address&0x03);
- usbtty_poll ();
- }
-
- buf_pop (&usbtty_input, &c, 1);
- udc_set_nak(endpoint->endpoint_address&0x03);
-
- return c;
-}
-
-/*
- * Output a single byte to the usb client port.
- */
-void usbtty_putc (const char c)
-{
- buf_push (&usbtty_output, &c, 1);
- /* If \n, also do \r */
- if (c == '\n')
- buf_push (&usbtty_output, "\r", 1);
-
- /* Poll at end to handle new data... */
- if ((usbtty_output.size + 2) >= usbtty_output.totalsize) {
- usbtty_poll ();
- }
-}
-
-/* usbtty_puts() helper function for finding the next '\n' in a string */
-static int next_nl_pos (const char *s)
-{
- int i;
-
- for (i = 0; s[i] != '\0'; i++) {
- if (s[i] == '\n')
- return i;
- }
- return i;
-}
-
-/*
- * Output a string to the usb client port - implementing flow control
- */
-
-static void __usbtty_puts (const char *str, int len)
-{
- int maxlen = usbtty_output.totalsize;
- int space, n;
-
- /* break str into chunks < buffer size, if needed */
- while (len > 0) {
- usbtty_poll ();
-
- space = maxlen - usbtty_output.size;
- /* Empty buffer here, if needed, to ensure space... */
- if (space) {
- write_buffer (&usbtty_output);
-
- n = MIN (space, MIN (len, maxlen));
- buf_push (&usbtty_output, str, n);
-
- str += n;
- len -= n;
- }
- }
-}
-
-void usbtty_puts (const char *str)
-{
- int n;
- int len = strlen (str);
-
- /* add '\r' for each '\n' */
- while (len > 0) {
- n = next_nl_pos (str);
-
- if (str[n] == '\n') {
- __usbtty_puts (str, n + 1);
- __usbtty_puts ("\r", 1);
- str += (n + 1);
- len -= (n + 1);
- } else {
- /* No \n found. All done. */
- __usbtty_puts (str, n);
- break;
- }
- }
-
- /* Poll at end to handle new data... */
- usbtty_poll ();
-}
-
-/*
- * Initialize the usb client port.
- *
- */
-int drv_usbtty_init (void)
-{
- int rc;
- char * sn;
- char * tt;
- int snlen;
-
- /* Ger seiral number */
- if (!(sn = getenv("serial#"))) {
- sn = "000000000000";
- }
- snlen = strlen(sn);
- if (snlen > sizeof(serial_number) - 1) {
- printf ("Warning: serial number %s is too long (%d > %d)\n",
- sn, snlen, sizeof(serial_number) - 1);
- snlen = sizeof(serial_number) - 1;
- }
- memcpy (serial_number, sn, snlen);
- serial_number[snlen] = '\0';
-
- /* Decide on which type of UDC device to be.
- */
-
- if(!(tt = getenv("usbtty"))) {
- tt = "generic";
- }
- usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
-
- /* prepare buffers... */
- buf_init (&usbtty_input, USBTTY_BUFFER_SIZE);
- buf_init (&usbtty_output, USBTTY_BUFFER_SIZE);
-
- /* Now, set up USB controller and infrastructure */
- udc_init (); /* Basic USB initialization */
-
- usbtty_init_strings ();
- usbtty_init_instances ();
-
- udc_startup_events (device_instance);/* Enable dev, init udc pointers */
- udc_connect (); /* Enable pullup for host detection */
-
- usbtty_init_endpoints ();
-
- /* Device initialization */
- memset (&usbttydev, 0, sizeof (usbttydev));
-
- strcpy (usbttydev.name, "usbtty");
- usbttydev.ext = 0; /* No extensions */
- usbttydev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_OUTPUT;
- usbttydev.tstc = usbtty_tstc; /* 'tstc' function */
- usbttydev.getc = usbtty_getc; /* 'getc' function */
- usbttydev.putc = usbtty_putc; /* 'putc' function */
- usbttydev.puts = usbtty_puts; /* 'puts' function */
-
- rc = device_register (&usbttydev);
-
- return (rc == 0) ? 1 : rc;
-}
-
-static void usbtty_init_strings (void)
-{
- struct usb_string_descriptor *string;
-
- usbtty_string_table[STR_LANG] =
- (struct usb_string_descriptor*)wstrLang;
-
- string = (struct usb_string_descriptor *) wstrManufacturer;
- string->bLength = sizeof(wstrManufacturer);
- string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_MANUFACTURER, string->wData);
- usbtty_string_table[STR_MANUFACTURER]=string;
-
-
- string = (struct usb_string_descriptor *) wstrProduct;
- string->bLength = sizeof(wstrProduct);
- string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData);
- usbtty_string_table[STR_PRODUCT]=string;
-
-
- string = (struct usb_string_descriptor *) wstrSerial;
- string->bLength = sizeof(serial_number);
- string->bDescriptorType = USB_DT_STRING;
- str2wide (serial_number, string->wData);
- usbtty_string_table[STR_SERIAL]=string;
-
-
- string = (struct usb_string_descriptor *) wstrConfiguration;
- string->bLength = sizeof(wstrConfiguration);
- string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
- usbtty_string_table[STR_CONFIG]=string;
-
-
- string = (struct usb_string_descriptor *) wstrDataInterface;
- string->bLength = sizeof(wstrDataInterface);
- string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
- usbtty_string_table[STR_DATA_INTERFACE]=string;
-
- string = (struct usb_string_descriptor *) wstrCtrlInterface;
- string->bLength = sizeof(wstrCtrlInterface);
- string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
- usbtty_string_table[STR_CTRL_INTERFACE]=string;
-
- /* Now, initialize the string table for ep0 handling */
- usb_strings = usbtty_string_table;
-}
-
-static void usbtty_init_instances (void)
-{
- int i;
-
- /* initialize device instance */
- memset (device_instance, 0, sizeof (struct usb_device_instance));
- device_instance->device_state = STATE_INIT;
- device_instance->device_descriptor = &device_descriptor;
- device_instance->event = usbtty_event_handler;
- device_instance->cdc_recv_setup = usbtty_cdc_setup;
- device_instance->bus = bus_instance;
- device_instance->configurations = NUM_CONFIGS;
- device_instance->configuration_instance_array = config_instance;
-
- /* initialize bus instance */
- memset (bus_instance, 0, sizeof (struct usb_bus_instance));
- bus_instance->device = device_instance;
- bus_instance->endpoint_array = endpoint_instance;
- bus_instance->max_endpoints = 1;
- bus_instance->maxpacketsize = 64;
- bus_instance->serial_number_str = serial_number;
-
- /* configuration instance */
- memset (config_instance, 0,
- sizeof (struct usb_configuration_instance));
- config_instance->interfaces = interface_count;
- config_instance->configuration_descriptor = configuration_descriptor;
- config_instance->interface_instance_array = interface_instance;
-
- /* interface instance */
- memset (interface_instance, 0,
- sizeof (struct usb_interface_instance));
- interface_instance->alternates = 1;
- interface_instance->alternates_instance_array = alternate_instance;
-
- /* alternates instance */
- memset (alternate_instance, 0,
- sizeof (struct usb_alternate_instance));
- alternate_instance->interface_descriptor = interface_descriptors;
- alternate_instance->endpoints = NUM_ENDPOINTS;
- alternate_instance->endpoints_descriptor_array = ep_descriptor_ptrs;
-
- /* endpoint instances */
- memset (&endpoint_instance[0], 0,
- sizeof (struct usb_endpoint_instance));
- endpoint_instance[0].endpoint_address = 0;
- endpoint_instance[0].rcv_packetSize = EP0_MAX_PACKET_SIZE;
- endpoint_instance[0].rcv_attributes = USB_ENDPOINT_XFER_CONTROL;
- endpoint_instance[0].tx_packetSize = EP0_MAX_PACKET_SIZE;
- endpoint_instance[0].tx_attributes = USB_ENDPOINT_XFER_CONTROL;
- udc_setup_ep (device_instance, 0, &endpoint_instance[0]);
-
- for (i = 1; i <= NUM_ENDPOINTS; i++) {
- memset (&endpoint_instance[i], 0,
- sizeof (struct usb_endpoint_instance));
-
- endpoint_instance[i].endpoint_address =
- ep_descriptor_ptrs[i - 1]->bEndpointAddress;
-
- endpoint_instance[i].rcv_attributes =
- ep_descriptor_ptrs[i - 1]->bmAttributes;
-
- endpoint_instance[i].rcv_packetSize =
- le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
-
- endpoint_instance[i].tx_attributes =
- ep_descriptor_ptrs[i - 1]->bmAttributes;
-
- endpoint_instance[i].tx_packetSize =
- le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
-
- endpoint_instance[i].tx_attributes =
- ep_descriptor_ptrs[i - 1]->bmAttributes;
-
- urb_link_init (&endpoint_instance[i].rcv);
- urb_link_init (&endpoint_instance[i].rdy);
- urb_link_init (&endpoint_instance[i].tx);
- urb_link_init (&endpoint_instance[i].done);
-
- if (endpoint_instance[i].endpoint_address & USB_DIR_IN)
- endpoint_instance[i].tx_urb =
- usbd_alloc_urb (device_instance,
- &endpoint_instance[i]);
- else
- endpoint_instance[i].rcv_urb =
- usbd_alloc_urb (device_instance,
- &endpoint_instance[i]);
- }
-}
-
-static void usbtty_init_endpoints (void)
-{
- int i;
-
- bus_instance->max_endpoints = NUM_ENDPOINTS + 1;
- for (i = 1; i <= NUM_ENDPOINTS; i++) {
- udc_setup_ep (device_instance, i, &endpoint_instance[i]);
- }
-}
-
-/* usbtty_init_terminal_type
- *
- * Do some late binding for our device type.
- */
-static void usbtty_init_terminal_type(short type)
-{
- switch(type){
- /* CDC ACM */
- case 0:
- /* Assign endpoint descriptors */
- ep_descriptor_ptrs[0] =
- &acm_configuration_descriptors[0].notification_endpoint;
- ep_descriptor_ptrs[1] =
- &acm_configuration_descriptors[0].data_endpoints[0];
- ep_descriptor_ptrs[2] =
- &acm_configuration_descriptors[0].data_endpoints[1];
-
- /* Enumerate Device Descriptor */
- device_descriptor.bDeviceClass =
- COMMUNICATIONS_DEVICE_CLASS;
- device_descriptor.idProduct =
- cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
-
- /* Assign endpoint indices */
- tx_endpoint = ACM_TX_ENDPOINT;
- rx_endpoint = ACM_RX_ENDPOINT;
-
- /* Configuration Descriptor */
- configuration_descriptor =
- (struct usb_configuration_descriptor*)
- &acm_configuration_descriptors;
-
- /* Interface count */
- interface_count = NUM_ACM_INTERFACES;
- break;
-
- /* BULK IN/OUT & Default */
- case 1:
- default:
- /* Assign endpoint descriptors */
- ep_descriptor_ptrs[0] =
- &gserial_configuration_descriptors[0].data_endpoints[0];
- ep_descriptor_ptrs[1] =
- &gserial_configuration_descriptors[0].data_endpoints[1];
- ep_descriptor_ptrs[2] =
- &gserial_configuration_descriptors[0].data_endpoints[2];
-
- /* Enumerate Device Descriptor */
- device_descriptor.bDeviceClass = 0xFF;
- device_descriptor.idProduct =
- cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
-
- /* Assign endpoint indices */
- tx_endpoint = GSERIAL_TX_ENDPOINT;
- rx_endpoint = GSERIAL_RX_ENDPOINT;
-
- /* Configuration Descriptor */
- configuration_descriptor =
- (struct usb_configuration_descriptor*)
- &gserial_configuration_descriptors;
-
- /* Interface count */
- interface_count = NUM_GSERIAL_INTERFACES;
- break;
- }
-}
-
-/******************************************************************************/
-
-static struct urb *next_urb (struct usb_device_instance *device,
- struct usb_endpoint_instance *endpoint)
-{
- struct urb *current_urb = NULL;
- int space;
-
- /* If there's a queue, then we should add to the last urb */
- if (!endpoint->tx_queue) {
- current_urb = endpoint->tx_urb;
- } else {
- /* Last urb from tx chain */
- current_urb =
- p2surround (struct urb, link, endpoint->tx.prev);
- }
-
- /* Make sure this one has enough room */
- space = current_urb->buffer_length - current_urb->actual_length;
- if (space > 0) {
- return current_urb;
- } else { /* No space here */
- /* First look at done list */
- current_urb = first_urb_detached (&endpoint->done);
- if (!current_urb) {
- current_urb = usbd_alloc_urb (device, endpoint);
- }
-
- urb_append (&endpoint->tx, current_urb);
- endpoint->tx_queue++;
- }
- return current_urb;
-}
-
-static int write_buffer (circbuf_t * buf)
-{
- if (!usbtty_configured ()) {
- return 0;
- }
-
- struct usb_endpoint_instance *endpoint =
- &endpoint_instance[tx_endpoint];
- struct urb *current_urb = NULL;
-
- current_urb = next_urb (device_instance, endpoint);
- /* TX data still exists - send it now
- */
- if(endpoint->sent < current_urb->actual_length){
- if(udc_endpoint_write (endpoint)){
- /* Write pre-empted by RX */
- return -1;
- }
- }
-
- if (buf->size) {
- char *dest;
-
- int space_avail;
- int popnum, popped;
- int total = 0;
-
- /* Break buffer into urb sized pieces,
- * and link each to the endpoint
- */
- while (buf->size > 0) {
-
- if (!current_urb) {
- TTYERR ("current_urb is NULL, buf->size %d\n",
- buf->size);
- return total;
- }
-
- dest = (char*)current_urb->buffer +
- current_urb->actual_length;
-
- space_avail =
- current_urb->buffer_length -
- current_urb->actual_length;
- popnum = MIN (space_avail, buf->size);
- if (popnum == 0)
- break;
-
- popped = buf_pop (buf, dest, popnum);
- if (popped == 0)
- break;
- current_urb->actual_length += popped;
- total += popped;
-
- /* If endpoint->last == 0, then transfers have
- * not started on this endpoint
- */
- if (endpoint->last == 0) {
- if(udc_endpoint_write (endpoint)){
- /* Write pre-empted by RX */
- return -1;
- }
- }
-
- }/* end while */
- return total;
- }
-
- return 0;
-}
-
-static int fill_buffer (circbuf_t * buf)
-{
- struct usb_endpoint_instance *endpoint =
- &endpoint_instance[rx_endpoint];
-
- if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
- unsigned int nb = 0;
- char *src = (char *) endpoint->rcv_urb->buffer;
- unsigned int rx_avail = buf->totalsize - buf->size;
-
- if(rx_avail >= endpoint->rcv_urb->actual_length){
-
- nb = endpoint->rcv_urb->actual_length;
- buf_push (buf, src, nb);
- endpoint->rcv_urb->actual_length = 0;
-
- }
- return nb;
- }
- return 0;
-}
-
-static int usbtty_configured (void)
-{
- return usbtty_configured_flag;
-}
-
-/******************************************************************************/
-
-static void usbtty_event_handler (struct usb_device_instance *device,
- usb_device_event_t event, int data)
-{
- switch (event) {
- case DEVICE_RESET:
- case DEVICE_BUS_INACTIVE:
- usbtty_configured_flag = 0;
- break;
- case DEVICE_CONFIGURED:
- usbtty_configured_flag = 1;
- break;
-
- case DEVICE_ADDRESS_ASSIGNED:
- usbtty_init_endpoints ();
-
- default:
- break;
- }
-}
-
-/******************************************************************************/
-
-int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
-{
- switch (request->bRequest){
-
- case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */
- break;
- case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */
- break;
- case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits
- * per character */
- break;
- case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */
- break;
- case ACM_GET_LINE_ENCODING : /* request DTE rate,
- * stop/parity bits */
- memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc));
- urb->actual_length = sizeof(rs232_desc);
-
- break;
- default:
- return 1;
- }
- return 0;
-}
-
-/******************************************************************************/
-
-/*
- * Since interrupt handling has not yet been implemented, we use this function
- * to handle polling. This is called by the tstc,getc,putc,puts routines to
- * update the USB state.
- */
-void usbtty_poll (void)
-{
- /* New interrupts? */
- udc_irq();
-
- /* Write any output data to host buffer
- * (do this before checking interrupts to avoid missing one)
- */
- if (usbtty_configured ()) {
- write_buffer (&usbtty_output);
- }
-
- /* New interrupts? */
- udc_irq();
-
- /* Check for new data from host..
- * (do this after checking interrupts to get latest data)
- */
- if (usbtty_configured ()) {
- fill_buffer (&usbtty_input);
- }
-
- /* New interrupts? */
- udc_irq();
-
-}
-
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Gerry Hamel, geh@ti.com, Texas Instruments
- *
- * (C) Copyright 2006
- * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __USB_TTY_H__
-#define __USB_TTY_H__
-
-#include "usbdcore.h"
-#if defined(CONFIG_PPC)
-#include "usbdcore_mpc8xx.h"
-#elif defined(CONFIG_ARM)
-#include "usbdcore_omap1510.h"
-#endif
-
-#include <version_autogenerated.h>
-
-/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
- * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
-
-#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
-#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
-#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
-#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
-#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
-
-
-#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
-
-#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
-#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
-#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
-#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
-#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
-#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
-#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
-
-#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
-
-#define USBTTY_BCD_DEVICE 0x00
-#define USBTTY_MAXPOWER 0x00
-
-#define STR_LANG 0x00
-#define STR_MANUFACTURER 0x01
-#define STR_PRODUCT 0x02
-#define STR_SERIAL 0x03
-#define STR_CONFIG 0x04
-#define STR_DATA_INTERFACE 0x05
-#define STR_CTRL_INTERFACE 0x06
-#define STR_COUNT 0x07
-
-#endif
projects / u-boot / commitdiff