]> git.sur5r.net Git - u-boot/commitdiff
86xx: Convert sbc8641d to use libfdt.
authorJon Loeliger <jdl@freescale.com>
Mon, 18 Feb 2008 20:01:56 +0000 (14:01 -0600)
committerJon Loeliger <jdl@freescale.com>
Mon, 18 Feb 2008 20:01:56 +0000 (14:01 -0600)
This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger <jdl@freescale.com>
board/freescale/mpc8641hpcn/mpc8641hpcn.c
board/sbc8641d/sbc8641d.c
cpu/mpc86xx/Makefile
cpu/mpc86xx/cpu.c
cpu/mpc86xx/fdt.c [new file with mode: 0644]
include/configs/sbc8641d.h

index 827878939d2f6f0f3bb2025ca485993dc4157381..ae791431d362d13ffee7a245964359983b0135cd 100644 (file)
@@ -321,28 +321,16 @@ void pci_init_board(void)
 
 }
 
+
 #if defined(CONFIG_OF_BOARD_SETUP)
+
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
        int node, tmp[2];
        const char *path;
 
-       fdt_fixup_ethernet(blob, bd);
-
-       do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-                            "timebase-frequency", bd->bi_busfreq / 4, 1);
-       do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-                            "bus-frequency", bd->bi_busfreq, 1);
-       do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
-                            "clock-frequency", bd->bi_intfreq, 1);
-       do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
-                            "bus-frequency", bd->bi_busfreq, 1);
-
-       do_fixup_by_compat_u32(blob, "ns16550",
-                              "clock-frequency", bd->bi_busfreq, 1);
-
-       fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
+       ft_cpu_setup(blob, bd);
 
        node = fdt_path_offset(blob, "/aliases");
        tmp[0] = 0;
index 7adc42faec101539f6d6e056224e9c72269e5b8c..78656e9024af207526c309f18d7878ba55917f62 100644 (file)
 #include <asm/immap_86xx.h>
 #include <asm/immap_fsl_pci.h>
 #include <spd.h>
-
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-extern void ft_cpu_setup (void *blob, bd_t * bd);
-#endif
+#include <libfdt.h>
+#include <fdt_support.h>
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc (unsigned int dram_size);
@@ -341,18 +338,34 @@ void pci_init_board(void)
 
 }
 
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup (void *blob, bd_t * bd)
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+void
+ft_board_setup (void *blob, bd_t *bd)
 {
-       u32 *p;
-       int len;
+       int node, tmp[2];
+       const char *path;
 
-       ft_cpu_setup (blob, bd);
+       ft_cpu_setup(blob, bd);
 
-       p = ft_get_prop (blob, "/memory/reg", &len);
-       if (p != NULL) {
-               *p++ = cpu_to_be32 (bd->bi_memstart);
-               *p = cpu_to_be32 (bd->bi_memsize);
+       node = fdt_path_offset(blob, "/aliases");
+       tmp[0] = 0;
+       if (node >= 0) {
+#ifdef CONFIG_PCI1
+               path = fdt_getprop(blob, node, "pci0", NULL);
+               if (path) {
+                       tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+                       do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+               }
+#endif
+#ifdef CONFIG_PCI2
+               path = fdt_getprop(blob, node, "pci1", NULL);
+               if (path) {
+                       tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+                       do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+               }
+#endif
        }
 }
 #endif
index 6d9300e22e7e18e7b71d09f4c4ba56d2ae2efc7b..537f62a3238688d8e80070456a0960bfddf5e513 100644 (file)
@@ -28,13 +28,20 @@ include $(TOPDIR)/config.mk
 
 LIB    = $(obj)lib$(CPU).a
 
-START  = start.o #resetvec.o
+START  = start.o
 SOBJS  = cache.o
-COBJS  = traps.o cpu.o cpu_init.o speed.o interrupts.o \
-         spd_sdram.o
 
-SRCS   := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(SOBJS) $(COBJS))
+COBJS-y        += traps.o
+COBJS-y        += cpu.o
+COBJS-y        += cpu_init.o
+COBJS-y        += speed.o
+COBJS-y        += interrupts.o
+COBJS-y        += spd_sdram.o
+
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+SRCS   := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS   := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
 START  := $(addprefix $(obj),$(START))
 
 all:   $(obj).depend $(START) $(LIB)
index e1b3c52dcdc5e485d9c9ff828de86bd38b6bce63..bf4e651aaf2baa8f02845d18de0b474e64b9310b 100644 (file)
@@ -29,9 +29,6 @@
 #include <mpc86xx.h>
 #include <asm/fsl_law.h>
 
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#endif
 
 int
 checkcpu(void)
@@ -269,64 +266,6 @@ dma_xfer(void *dest, uint count, void *src)
 #endif /* CONFIG_DDR_ECC */
 
 
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
-       u32 *p;
-       ulong clock;
-       int len;
-
-       clock = bd->bi_busfreq;
-       p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
-       if (p != NULL)
-               *p = cpu_to_be32(clock);
-
-       p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
-       if (p != NULL)
-               *p = cpu_to_be32(clock);
-
-       p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
-       if (p != NULL)
-               *p = cpu_to_be32(clock);
-
-#if defined(CONFIG_TSEC1)
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enetaddr, 6);
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
-       if (p)
-               memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#if defined(CONFIG_TSEC2)
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enet1addr, 6);
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#if defined(CONFIG_TSEC3)
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enet2addr, 6);
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enet2addr, 6);
-#endif
-
-#if defined(CONFIG_TSEC4)
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enet3addr, 6);
-       p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
-       if (p != NULL)
-               memcpy(p, bd->bi_enet3addr, 6);
-#endif
-#endif /* CONFIG_OF_FLAT_TREE */
-
 /*
  * Print out the state of various machine registers.
  * Currently prints out LAWs and BR0/OR0
diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c
new file mode 100644 (file)
index 0000000..379306e
--- /dev/null
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+       do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+                            "timebase-frequency", bd->bi_busfreq / 4, 1);
+       do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+                            "bus-frequency", bd->bi_busfreq, 1);
+       do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+                            "clock-frequency", bd->bi_intfreq, 1);
+       do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+                            "bus-frequency", bd->bi_busfreq, 1);
+
+       fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
+    || defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+       fdt_fixup_ethernet(blob, bd);
+#endif
+
+#ifdef CFG_NS16550
+       do_fixup_by_compat_u32(blob, "ns16550",
+                              "clock-frequency", bd->bi_busfreq, 1);
+#endif
+}
index 1991a8cc873e889069014c4a0ddb709b00dd4587..18cedff929e5cf3d5809ddb071e27b93f9104262 100644 (file)
 /*
  * Pass open firmware flat tree to kernel
  */
-#define CONFIG_OF_FLAT_TREE    1
-#define CONFIG_OF_BOARD_SETUP  1
-
-#define OF_CPU         "PowerPC,8641@0"
-#define OF_SOC         "soc@f8000000"
-#define OF_TBCLK       (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc@f8000000/serial@4500"
+#define CONFIG_OF_LIBFDT               1
+#define CONFIG_OF_BOARD_SETUP          1
+#define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 #define CFG_64BIT_VSPRINTF     1
 #define CFG_64BIT_STRTOUL      1