]> git.sur5r.net Git - u-boot/commitdiff
arm: omap: emif: Fix DDR3 init after warm reset
authorLokesh Vutla <lokeshvutla@ti.com>
Wed, 27 Mar 2013 20:24:42 +0000 (20:24 +0000)
committerTom Rini <trini@ti.com>
Fri, 10 May 2013 12:25:55 +0000 (08:25 -0400)
EMIF supports a global warm reset mode, during which the
EMIF keeps the SDRAM content. But if leveling is enabled
at the time of warm reset for DDR3, the following steps
needs to be done after warm reset:
1) Keep EMIF in self refresh mode.
2) Reset PHY to bring back the PHY to a known state.
3) Start Levelling procedure.
Doing the same.
And also enabling DLL lock and code output after warm reset.

Tested on OMAP5432 ES2.0

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
arch/arm/cpu/armv7/omap-common/emif-common.c

index cdb443972175e6b1b0166007ab3c0a0f487e90c6..11e830a533bd6106bf92325d5fbdac6518e2267a 100644 (file)
@@ -1075,6 +1075,11 @@ static void do_sdram_init(u32 base)
                else
                        ddr3_init(base, regs);
        }
+       if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) {
+               set_lpmode_selfrefresh(base);
+               emif_reset_phy(base);
+               ddr3_leveling(base, regs);
+       }
 
        /* Write to the shadow registers */
        emif_update_timings(base, regs);
@@ -1262,10 +1267,10 @@ void sdram_init(void)
        in_sdram = running_from_sdram();
        debug("in_sdram = %d\n", in_sdram);
 
-       if (!(in_sdram || warm_reset())) {
-               if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2)
+       if (!in_sdram) {
+               if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset())
                        bypass_dpll((*prcm)->cm_clkmode_dpll_core);
-               else
+               else if (sdram_type == EMIF_SDRAM_TYPE_DDR3)
                        writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl);
        }