E: timur@freescale.com
D: Support for MPC8349E-mITX
W: www.freescale.com
+
+N: Michal Simek
+E: monstr@monstr.eu
+D: Support for Microblaze, ML401, XUPV2P board
+W: www.monstr.eu
SUZAKU MicroBlaze
+Michal Simek <monstr@monstr.eu>
+
+ ML401 MicroBlaze
+ XUPV2P MicroBlaze
+
#########################################################################
# Coldfire Systems: #
# #
#########################################################################
LIST_microblaze=" \
- suzaku ml401
+ suzaku ml401 xupv2p
"
#########################################################################
@echo "#define CONFIG_ML401 1" >> include/config.h
@./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+xupv2p_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_XUPV2P 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+
#########################################################################
## Blackfin
#########################################################################
*(.bss)
__bss_end = .;
}
+ __end = . ;
}
+#*********************************************************************
#
-# (C) Copyright 2004 Atmark Techno, Inc.
-#
-# Yasushi SHOJI <yashi@atmark-techno.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+# Description: U-BOOT Configuration File
+# Michal Simek - monstr@monstr.eu
#
+#**********************************************************************
TEXT_BASE = 0x12000000
*(.bss)
__bss_end = .;
}
+ __end = . ;
}
-/*
- * (C) Copyright 2007 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* DDR SDRAM */
-#define CONFIG_XILINX_ERAM_START 0x10000000
-#define CONFIG_XILINX_ERAM_SIZE 0x04000000
-
-/* FLASH_MEMORY Settings */
-#define CONFIG_XILINX_FLASH_START 0x28000000
-#define CONFIG_XILINX_FLASH_SIZE 0x00800000
-
-/* serial line */
-#define CONFIG_XILINX_UARTLITE_0_BASEADDR 0xA0000000
-#define CONFIG_XILINX_UARTLITE_0_BAUDRATE 115200
-
-/* GPIO */
-#define CONFIG_XILINX_GPIO_0_BASEADDR 0x90000000
-
-/* INTC */
-#define CONFIG_XILINX_INTC_0_BASEADDR 0xD1000FC0
-#define CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS 12
-
-/* TIMER */
-#define CONFIG_XILINX_TIMER_0_BASEADDR 0xA2000000
-#define CONFIG_XILINX_TIMER_0_IRQ 0
-
-/* ethernet */
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_EMAC_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
+/*********************************************************************
+#
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
+# Description: U-BOOT Configuration File
+# Michal Simek - monstr@monstr.eu
+#
+**********************************************************************/
+
+/* System Clock Frequency */
+#define XILINX_CLOCK_FREQ 66666667
+
+/* Interrupt controller is intc_0 */
+#define XILINX_INTC_BASEADDR 0xd1000fc0
+#define XILINX_INTC_NUM_INTR_INPUTS 12
+
+/* Timer pheriphery is opb_timer_0 */
+#define XILINX_TIMER_BASEADDR 0xa2000000
+#define XILINX_TIMER_IRQ 0
+
+/* Uart pheriphery is console_uart */
+#define XILINX_UART_BASEADDR 0xa0000000
+#define XILINX_UART_BAUDRATE 115200
+
+/* GPIO is opb_gpio_0*/
+#define XILINX_GPIO_BASEADDR 0x90000000
+
+/* Flash Memory is opb_emc_0 */
+#define XILINX_FLASH_START 0x28000000
+#define XILINX_FLASH_SIZE 0x00800000
+
+/* Main Memory is plb_ddr_0 */
+#define XILINX_RAM_START 0x10000000
+#define XILINX_RAM_SIZE 0x10000000
+
+/* Sysace Controller is opb_sysace_0 */
+#define XILINX_SYSACE_BASEADDR 0xCF000000
+#define XILINX_SYSACE_HIGHADDR 0xCF0001FF
+#define XILINX_SYSACE_MEM_WIDTH 16
+
+/* Ethernet controller is opb_ethernet_0 */
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
RecvFrameLength = PKTSIZE;
Result = XEmac_PollRecv(&Emac, (u8 *) etherrxbuff, &RecvFrameLength);
if (Result == XST_SUCCESS) {
-#ifndef CONFIG_MICROBLAZE
+#ifndef CONFIG_EMACLITE
NetReceive((uchar *)etherrxbuff, RecvFrameLength);
#else
NetReceive(etherrxbuff, RecvFrameLength);
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+endif
+
+INCS := -I../common -I../xilinx_enet
+CFLAGS += $(INCS)
+HOST_CFLAGS += $(INCS)
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o \
+ ../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
+ ../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
+ ../xilinx_enet/xemac_intr.o ../xilinx_enet/xemac_g.o \
+ ../xilinx_enet/xemac_intr_dma.o ../common/xipif_v1_23_b.o \
+ ../common/xbasic_types.o ../common/xdma_channel.o \
+ ../common/xdma_channel_sg.o ../common/xpacket_fifo_v1_00_b.o \
+ ../common/xversion.o \
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#*********************************************************************
+#
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+# Description: U-BOOT Configuration File
+# Michal Simek - monstr@monstr.eu
+#
+#**********************************************************************
+
+TEXT_BASE = 0x38000000
+
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
+PLATFORM_CPPFLAGS += -mno-xl-soft-div
+PLATFORM_CPPFLAGS += -mxl-barrel-shift
--- /dev/null
+/*
+ * (C) Copyright 2004 Atmark Techno, Inc.
+ *
+ * Yasushi SHOJI <yashi@atmark-techno.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(microblaze)
+ENTRY(_start)
+
+SECTIONS
+{
+ .text ALIGN(0x4):
+ {
+ __text_start = .;
+ cpu/microblaze/start.o (.text)
+ *(.text)
+ __text_end = .;
+ }
+
+ .rodata ALIGN(0x4):
+ {
+ __rodata_start = .;
+ *(.rodata)
+ __rodata_end = .;
+ }
+
+ .data ALIGN(0x4):
+ {
+ __data_start = .;
+ *(.data)
+ __data_end = .;
+ }
+
+ .u_boot_cmd ALIGN(0x4):
+ {
+ . = .;
+ __u_boot_cmd_start = .;
+ *(.u_boot_cmd)
+ __u_boot_cmd_end = .;
+ }
+
+ .bss ALIGN(0x4):
+ {
+ __bss_start = .;
+ *(.bss)
+ __bss_end = .;
+ }
+ __end = . ;
+}
--- /dev/null
+/*********************************************************************
+#
+# CAUTION: This file is automatically generated by libgen.
+# Version: Xilinx EDK 8.2.02 EDK_Im_Sp2.4
+# Description: U-BOOT Configuration File
+# Michal Simek - monstr@monstr.eu
+#
+**********************************************************************/
+
+/* System Clock Frequency */
+#define XILINX_CLOCK_FREQ 100000000
+
+/* Interrupt controller is opb_intc_0 */
+#define XILINX_INTC_BASEADDR 0x41200000
+#define XILINX_INTC_NUM_INTR_INPUTS 11
+
+/* Timer pheriphery is opb_timer_1 */
+#define XILINX_TIMER_BASEADDR 0x41c00000
+#define XILINX_TIMER_IRQ 1
+
+/* Uart pheriphery is RS232_Uart_1 */
+#define XILINX_UART_BASEADDR 0x40600000
+#define XILINX_UART_BAUDRATE 115200
+
+/* GPIO is LEDs_4Bit*/
+#define XILINX_GPIO_BASEADDR 0x40000000
+
+/* FLASH doesn't exist none */
+
+/* Main Memory is DDR_256MB_32MX64_rank1_row13_col10_cl2_5 */
+#define XILINX_RAM_START 0x30000000
+#define XILINX_RAM_SIZE 0x10000000
+
+/* Sysace Controller is SysACE_CompactFlash */
+#define XILINX_SYSACE_BASEADDR 0x41800000
+#define XILINX_SYSACE_HIGHADDR 0x4180ffff
+#define XILINX_SYSACE_MEM_WIDTH 16
+
+/* Ethernet controller is Ethernet_MAC */
+#define XPAR_XEMAC_NUM_INSTANCES 1
+#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
+#define XPAR_OPB_ETHERNET_0_BASEADDR 0x40c00000
+#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x40c0ffff
+#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
+#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
+#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
--- /dev/null
+/*
+ * (C) Copyright 2007 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* This is a board specific file. It's OK to include board specific
+ * header files */
+
+#include <common.h>
+#include <configs/ml401.h>
+
+void do_reset (void)
+{
+#ifdef CFG_GPIO_0
+ *((unsigned long *)(CFG_GPIO_0_ADDR)) =
+ ++(*((unsigned long *)(CFG_GPIO_0_ADDR)));
+#endif
+#ifdef CFG_RESET_ADDRESS
+ puts ("Reseting board\n");
+ asm ("bra r0");
+#endif
+}
+
+int gpio_init (void)
+{
+#ifdef CFG_GPIO_0
+ *((unsigned long *)(CFG_GPIO_0_ADDR)) = 0x0;
+#endif
+ return 0;
+}
DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
#endif
-#ifdef CONFIG_MICROBLAZE
- /*
- * FIXME MALLOC error for Microblaze - error malloc return
- * bad value. Correct value is CFG_MONITOR_BASE - CFG_MALLOC_LEN.
- */
- env_ptr = (env_t *)CFG_MONITOR_BASE;
- DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
-#endif
/*
* After relocation to RAM, we can always use the "memory" functions
*/
{
struct irq_action *act;
/* irq out of range */
- if ((irq < 0) || (irq > CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS)) {
+ if ((irq < 0) || (irq > CFG_INTC_0_NUM)) {
puts ("IRQ out of range\n");
return;
}
{
int i;
/* initialize irq list */
- for (i = 0; i < CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS; i++) {
+ for (i = 0; i < CFG_INTC_0_NUM; i++) {
vecs[i].handler = (interrupt_handler_t *) def_hdlr;
vecs[i].arg = (void *)i;
vecs[i].count = 0;
"Nr Routine Arg Count\n"
"-----------------------------\n");
- for (i = 0; i < CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS; i++) {
+ for (i = 0; i < CFG_INTC_0_NUM; i++) {
if (act->handler != (interrupt_handler_t*) def_hdlr) {
printf ("%02d %08lx %08lx %d\n", i,
(int)act->handler, (int)act->arg, act->count);
_start:
mts rmsr, r0 /* disable cache */
addi r1, r0, CFG_INIT_SP_OFFSET
+ addi r1, r1, -4 /* Decrement SP to top of memory */
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
addi r6, r0, 0xb000 /* hex b000 opcode imm */
bslli r6, r6, 16 /* shift */
lhu r7, r1, r0
shi r7, r0, 0x2
shi r6, r0, 0x6
+/*
+ * Copy U-Boot code to TEXT_BASE
+ * solve problem with sbrk_base
+ */
+#if (CFG_RESET_ADDRESS != TEXT_BASE)
+ addi r4, r0, __end
+ addi r5, r0, __text_start
+ rsub r4, r5, r4 /* size = __end - __text_start */
+ addi r6, r0, CFG_RESET_ADDRESS /* source address */
+ addi r7, r0, 0 /* counter */
+4:
+ lw r8, r6, r7
+ sw r8, r5, r7
+ addi r7, r7, 0x4
+ cmp r8, r4, r7
+ blti r8, 4b
+#endif
#endif
#ifdef CFG_USR_EXCEP
ori r12, r12, 0xa0
mts rmsr, r12
- /* jumping to board_init */
+clear_bss:
+ /* clear BSS segments */
+ addi r5, r0, __bss_start
+ addi r4, r0, __bss_end
+ cmp r6, r5, r4
+ beqi r6, 3f
+2:
+ swi r0, r5, 0 /* write zero to loc */
+ addi r5, r5, 4 /* increment to next loc */
+ cmp r6, r5, r4 /* check if we have reach the end */
+ bnei r6, 2b
+3: /* jumping to board_init */
brai board_init
1: bri 1b
#define CONFIG_ML401 1 /* ML401 Board */
/* uart */
-#define CONFIG_SERIAL_BASE CONFIG_XILINX_UARTLITE_0_BASEADDR
-#define CONFIG_BAUDRATE CONFIG_XILINX_UARTLITE_0_BAUDRATE
+#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
/* setting reset address */
#define CFG_RESET_ADDRESS TEXT_BASE
+/* ethernet */
+#define CONFIG_EMACLITE 1
+#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+
/* gpio */
#define CFG_GPIO_0 1
-#define CFG_GPIO_0_ADDR CONFIG_XILINX_GPIO_0_BASEADDR
+#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
/* interrupt controller */
#define CFG_INTC_0 1
-#define CFG_INTC_0_ADDR CONFIG_XILINX_INTC_0_BASEADDR
-#define CFG_INTC_0_NUM CONFIG_XILINX_INTC_0_NUM_INTR_INPUTS
+#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR
+#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
/* timer */
#define CFG_TIMER_0 1
-#define CFG_TIMER_0_ADDR CONFIG_XILINX_TIMER_0_BASEADDR
-#define CFG_TIMER_0_IRQ CONFIG_XILINX_TIMER_0_IRQ
-#define FREQUENCE 66666666
+#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
+#define FREQUENCE XILINX_CLOCK_FREQ
#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
/*
*
* CFG_GBL_DATA_OFFSET = 0x1000_0000 + 0x0400_0000 - 0x1000 = 0x13FF_F000
* CFG_MONITOR_BASE = 0x13FF_F000 - 0x40000 = 0x13FB_F000
+ * CFG_MALLOC_BASE = 0x13FB_F000 - 0x40000 = 0x13F7_F000
*
* 0x1000_0000 CFG_SDRAM_BASE
* FREE
* FREE
*
* STACK
+ * 0x13F7_F000 CFG_MALLOC_BASE
+ * MALLOC_AREA 256kB Alloc
* 0x11FB_F000 CFG_MONITOR_BASE
- * MONITOR_CODE
+ * MONITOR_CODE 256kB Env
* 0x13FF_F000 CFG_GBL_DATA_OFFSET
- * GLOBAL_DATA
+ * GLOBAL_DATA 4kB bd, gd
* 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
*/
/* ddr sdram - main memory */
-#define CFG_SDRAM_BASE CONFIG_XILINX_ERAM_START
-#define CFG_SDRAM_SIZE CONFIG_XILINX_ERAM_SIZE
+#define CFG_SDRAM_BASE XILINX_RAM_START
+#define CFG_SDRAM_SIZE XILINX_RAM_SIZE
#define CFG_MEMTEST_START CFG_SDRAM_BASE
#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000)
#define SIZE 0x40000
#define CFG_MONITOR_LEN SIZE
#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
+#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_MALLOC_LEN SIZE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
/* stack */
#define CFG_INIT_SP_OFFSET CFG_MONITOR_BASE
#define FLASH
#ifdef FLASH
- #define CFG_FLASH_BASE CONFIG_XILINX_FLASH_START
- #define CFG_FLASH_SIZE CONFIG_XILINX_FLASH_SIZE
+ #define CFG_FLASH_BASE XILINX_FLASH_START
+ #define CFG_FLASH_SIZE XILINX_FLASH_SIZE
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_EMPTY_INFO 1 /* ?empty sector */
/* system ace */
/*#define CONFIG_SYSTEMACE
#define DEBUG_SYSTEMACE
-#define CFG_SYSTEMACE_BASE 0xCF000000
-#define CFG_SYSTEMACE_WIDTH 8
+#define CFG_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+#define CFG_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
#define CONFIG_DOS_PARTITION
*/
#endif /* __CONFIG_H */
#define CFG_FLASH_SIZE 0x00400000
#define CFG_RESET_ADDRESS 0xfff00100
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
+#define CFG_MONITOR_BASE (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - (1024 * 1024))
#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - (1024 * 1024))
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 115200 }
--- /dev/null
+/*
+ * (C) Copyright 2007 Czech Technical University.
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "../board/xilinx/xupv2p/xparameters.h"
+
+#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+#define CONFIG_XUPV2P 1
+
+/* uart */
+#define CONFIG_SERIAL_BASE XILINX_UART_BASEADDR
+#define CONFIG_BAUDRATE XILINX_UART_BAUDRATE
+#define CFG_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+
+/* ethernet */
+#define CONFIG_EMAC 1
+#define XPAR_EMAC_0_DEVICE_ID XPAR_XEMAC_NUM_INSTANCES
+
+/*
+ * setting reset address
+ *
+ * TEXT_BASE is set to place, where the U-BOOT run in RAM, but
+ * if you want to store U-BOOT in flash, set CFG_RESET_ADDRESS
+ * to FLASH memory and after loading bitstream jump to FLASH.
+ * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
+ * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
+ */
+#define CFG_RESET_ADDRESS 0x36000000
+
+/* gpio */
+#define CFG_GPIO_0 1
+#define CFG_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+
+/* interrupt controller */
+#define CFG_INTC_0 1
+#define CFG_INTC_0_ADDR XILINX_INTC_BASEADDR
+#define CFG_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+
+/* timer */
+#define CFG_TIMER_0 1
+#define CFG_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+#define CFG_TIMER_0_IRQ XILINX_TIMER_IRQ
+#define FREQUENCE XILINX_CLOCK_FREQ
+#define CFG_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+
+/*
+ * memory layout - Example
+ * TEXT_BASE = 0x3600_0000;
+ * CFG_SRAM_BASE = 0x3000_0000;
+ * CFG_SRAM_SIZE = 0x1000_0000;
+ *
+ * CFG_GBL_DATA_OFFSET = 0x3000_0000 + 0x1000_0000 - 0x1000 = 0x3FFF_F000
+ * CFG_MONITOR_BASE = 0x3FFF_F000 - 0x40000 = 0x3FFB_F000
+ * CFG_MALLOC_BASE = 0x3FFB_F000 - 0x40000 = 0x3FF7_F000
+ *
+ * 0x3000_0000 CFG_SDRAM_BASE
+ * FREE
+ * 0x3600_0000 TEXT_BASE
+ * U-BOOT code
+ * 0x3602_0000
+ * FREE
+ *
+ * STACK
+ * 0x3FF7_F000 CFG_MALLOC_BASE
+ * MALLOC_AREA 256kB Alloc
+ * 0x3FFB_F000 CFG_MONITOR_BASE
+ * MONITOR_CODE 256kB Env
+ * 0x3FFF_F000 CFG_GBL_DATA_OFFSET
+ * GLOBAL_DATA 4kB bd, gd
+ * 0x4000_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
+ */
+
+/* ddr sdram - main memory */
+#define CFG_SDRAM_BASE XILINX_RAM_START
+#define CFG_SDRAM_SIZE XILINX_RAM_SIZE
+#define CFG_MEMTEST_START CFG_SDRAM_BASE
+#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x1000)
+
+/* global pointer */
+#define CFG_GBL_DATA_SIZE 0x1000 /* size of global data */
+#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE) /* start of global data */
+
+/* monitor code */
+#define SIZE 0x40000
+#define CFG_MONITOR_LEN SIZE
+#define CFG_MONITOR_BASE (CFG_GBL_DATA_OFFSET - CFG_MONITOR_LEN)
+#define CFG_MONITOR_END (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_MALLOC_LEN SIZE
+#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+
+/* stack */
+#define CFG_INIT_SP_OFFSET CFG_MALLOC_BASE
+
+#define CFG_NO_FLASH 1
+#define CFG_ENV_IS_NOWHERE 1
+#define CFG_ENV_SIZE 0x1000
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
+#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
+ CFG_CMD_MEMORY |\
+ CFG_CMD_IRQ |\
+ CFG_CMD_BDI |\
+ CFG_CMD_NET |\
+ CFG_CMD_IMI |\
+ CFG_CMD_ECHO |\
+ CFG_CMD_CACHE |\
+ CFG_CMD_RUN |\
+ CFG_CMD_AUTOSCRIPT |\
+ CFG_CMD_ASKENV |\
+ CFG_CMD_LOADS |\
+ CFG_CMD_LOADB |\
+ CFG_CMD_MISC |\
+ CFG_CMD_PING \
+ )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/* Miscellaneous configurable options */
+#define CFG_PROMPT "U-Boot-mONStR> "
+#define CFG_CBSIZE 512 /* size of console buffer */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* print buffer size */
+#define CFG_MAXARGS 15 /* max number of command args */
+#define CFG_LONGHELP
+#define CFG_LOAD_ADDR 0x12000000 /* default load address */
+
+#define CONFIG_BOOTDELAY 30
+#define CONFIG_BOOTARGS "root=romfs"
+#define CONFIG_HOSTNAME "ml401"
+#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
+#define CONFIG_IPADDR 192.168.0.3
+#define CONFIG_SERVERIP 192.168.0.5
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+
+/* architecture dependent code */
+#define CFG_USR_EXCEP /* user exception */
+#define CFG_HZ 1000
+
+#define CONFIG_PREBOOT "echo U-BOOT by mONStR;" \
+ "base 0;" \
+ "echo"
+
+
+/* system ace */
+/*#define CONFIG_SYSTEMACE
+#define DEBUG_SYSTEMACE
+#define CFG_SYSTEMACE_BASE 0xCF000000
+#define CFG_SYSTEMACE_WIDTH 16
+#define CONFIG_DOS_PARTITION*/
+
+#endif /* __CONFIG_H */
*/
static void mem_malloc_init (void)
{
- mem_malloc_end = CFG_MONITOR_BASE + CFG_MONITOR_LEN;
- mem_malloc_start = CFG_MONITOR_BASE;
+ mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN);
+ mem_malloc_start = CFG_MALLOC_BASE;
mem_malloc_brk = mem_malloc_start;
memset ((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start);
}
projects / u-boot / commitdiff